Cisco AAA/Identity/Nac :: ACS 5.2 Will Not Enumerate 2003 AD Groups?
Aug 4, 2011
I have seen similar references to this issue, but no concrete solutions. My new ACS appears to join my domain with little or no issues, however, when I go to list the groups nothing is ever listed.Running ACS as a vm.I have set the ntp server on the ACS server to match my domain.I can ping all domain controllers/DNS servers.nslookup resolves hostnames of my domain controllers
***Update***
I verified that a computer account for my ACS is in fact being created, however, I am receiving some Kerberos errors on my DC with the FSMO roles:
Event Type: Error
Event Source: KDC
Event Category: None
Event ID: 26
Date: 8/5/2011
Time: 3:07:46 PM
User: N/A
Computer: <MY DC>
Description:While processing an AS request for target service krbtgt, the account <ACS SERVER> did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 1). The requested etypes were 17. The accounts available etypes were 23 -133 -128 3 1.
View 2 Replies
ADVERTISEMENT
Apr 14, 2011
I have ACS 5.2 running as a VM. I'm AD, then local authentication successfully for device access, but I want to define ACS user groups to restrict login. I don;t see any way to do this. If I use AD groups, they don;t show up as selection options on the policy screens, just the ACS locallyy defined groups.
View 1 Replies
View Related
Jul 21, 2011
I've run into an annoying issue with my ACS 5.2 install. I can no longer add directory groups in the AD settings, the ACS comes back with "The item you are trying to delete is referenced by other items.You must remove all references to this item before it can be deleted." but I am not deleting any group, just adding.
Could probably be cleared with removing the AD setup completely, which for obvious reasons is not something I want to do.
View 3 Replies
View Related
Apr 5, 2011
We are running two ACS appliances but we cannot figure out how we can add a user into 2 differents groups.Here's the context :We have a company A which is having devices, this company uses Group A.then we have a company B which is having devices, this company uses Group B.But the admin has to manage the devices for both companies A & B.We don't want to mix devices from company A with company B.Is there a way to add the user into both groups A & B.
View 5 Replies
View Related
Feb 27, 2011
I am in the process of setting up an ACS evaluation that will authenticate against a Windows 2003 AD. I am currently testing this with AAA TACACS+ but will evenutally setup 802.1x authentication. My problem however seems to be between the ACS and AD.
I have the AD External Identity store configured and successfully tested for connectivity. I created a shell profile and a command set and also created an access ploicy for Device Admin. I added the AAA commands to my test switch and do get prompted for username and password. This is where my issue starts. Regardless of what username and passwword I enter, I always fail authentication. At least that is what is in the reports and I have 0 hits on my Access and Authorization policy rule. I am using as basic as a config as I can get with simply using a contains from one of the groups I am in for the policy rule. I had a non-AD admin account to start with thinking maybe a rights issue with the AD account but have moved to an AD admin account with no change in the results. I saw a post somewhere that the time stamps on the AD server and the ACS had to almost be perfect and recommended that NTP for ACS be the AD server as that could cause issues and I have done that as well with no change. I am wondering if there is something specific I needed to configure or something I missed between the ACS and the AD? Is there a way I can display what is passed back and forth between the ACS, or the switch, and AD to verify content? I put a call into my local SE and he is as puzzled as I am.
View 1 Replies
View Related
Jun 13, 2011
I have an ACS 5.1 and am trying to integrate with windows 2008 R1. The ACS has a valid AD account and indicates that its connected but when I try to list any directory groups my windows IE browser hangs?
View 2 Replies
View Related
Nov 4, 2012
I've configured three specific AD groups, Admin, Storage, and HelpDesk, with their own commands sets.
This seems to be working fine, but everyone can log into everything, but they can't do anything except exit.
My goal is to not allow anyone to login that is not part of the three AD groups I have specified with the respective command sets.
All the logins hit the Admin account, even though the id in AD is not in the that AD group. I have something screwed up.
View 6 Replies
View Related
Oct 17, 2011
I'm curently studying for my CCNP Switch certfification, and I'm learning about RADIUS and AAA. I need to practice this topics, but unfortunately I can't find any way to do it. I have cisco ACS 4.2 but I'm unable to install it on my Server 2003 (it says mmc.exe needs to be closed, tried some things but no luck...). I'm unaware of any simulator for RADIUS or anything similar.
how to install ACS 4.2 on Server 2003 (how to solve the error I'm recieving), or point me towards some other product to practise RADIUS and AAA authentication
View 2 Replies
View Related
Jan 2, 2011
Recently I've been working with the ACS 5.2 (Installed on VMWare). At the beginning I was using a Win Server 2003 Enterprise edition AD, and there was no problem with the AD and the CA Authority. Because some of my customers use Win Server 2008 I change the AD platform to Win Server 2008 Enterprise edition (x64).I don't really have a great experience with Win Server Platforms and, for what I've seen, the Win Server 2003 Services deployment is easier than the Win Server 2008 is.
So, when I used the Win server 2003 I could not only synchronize the ACS with the AD but also use some groups created on the AD to perform the Network Access Authentication. When I try to do the same with the Win Server 2008 AD the ACS and the Server get Synchronized but when I want to add the groups for the Authentication purposes there is no one, absolutely nothing... so I cannot do any test.Also I looked for information about the compatibility between the ACS 5.2 and the Win Server 2008 platforms and at the end the platforms are compatibles.
View 13 Replies
View Related
May 13, 2012
I have been tasked with migrating from ACS 4 to ACS 5.3. I havent had any training and so i am finding it a bit different. Currently i have this issue -
I have a group in the ACS 4 for users accessing via wireless on the ACS - Code...
View 4 Replies
View Related
Jul 7, 2011
We have ACS Engine 4.1 and want to upgrade it to 5.x.
Is the new version of ACS 5.2 allows a user to belong to several groups of AD ?
View 2 Replies
View Related
Jan 18, 2011
I'm trying to setup ACS 5.2 with an ASA v8.3.2 to lock users into VPN groups based on a users AD group. I've tried various combinations but the group lock isn't working. I've done steps 1 & 2 ...
1) Network Devices and AAA Clients -> Define VPN
2) Users and Identity Stores -> Setup AD and Directory Groups, test connection
Policy Elements:
Q1) Policy Elements - Do I need an authorization profile for each group:
Q2) What RADIUS attributes should I use to match my ASA tunnel-groups?
RADIUS-IETF attribute 25?RADIUS-Cisco VPN 3000/ASA/PIX 7.x 85 (Tunnel-Group-Lock)?Other?
Access Policies:
Q1) Do I need to enable and use group mapping?
Q2) Do I need a Network Access Authorization Policy for each group?
View 8 Replies
View Related
Aug 21, 2011
I am trying to set up RA VPN on ASA 8.4 with 2 groups - VPNGp1 and VPNGp2. VPNGp1 users will access 1.2.3.0/24 and VPNGp2 users will access 5.6.7.0/24. User authentication will happen using ACS 5.3 Radius.
On ASA, I have configured the IP pools, VPN ACLs, VPN groups, group policies for each group, and tunnel groups.
On ACS, I have created vpn-user1 and vpn-user2 for each of 2 groups.
I am not sure if some more configuration needs to be done on ASA and ACS... Do I need to add new users - vpn-user1 and vpn-user2 - on ASA, under each corresponding group policy, using vpn-group-policy command? Or I need to do something else on ACS?
Lastly, how can I configure authorization and accounting for the VPN users? Do I need to do this on ACS or on ASA?
View 8 Replies
View Related
Jan 14, 2013
I have multiple campuses and a Central Admin...I've created Groups for all, except I need a few devices within Central to be available to the Campus Admins... (ie..a Cisco WCS System) How do I allow a device to be put into multiple NDG groups?
View 1 Replies
View Related
Nov 29, 2011
I have a problem when I try to install ACS 4.2 on Server 2003 R2. When I start the ACS setup, i recive an error message saying:
View 6 Replies
View Related
Jan 31, 2012
I continue to export a Certificate Signing Request for our local CA. They insist they are getting a parsing error (Invalid algorithm specified) when they cut and past or import the file I send them. In fact, they have stated that they have had this error with another Linux-based CSR.
I'm not find this issue prevalent on the Internet, so I wonder is this if a user issue on their behalf or the fact that they are using a Win2003 box as a local CA.
How to get a Cisco ACS ".pem" file signed in a local Win2003 CA or advise to an alternative to configuring 802.1x using EAP-TLS?
View 3 Replies
View Related
Jun 6, 2011
I am runing ACS 4.2 on Windows 2003 and for some reasons I need to rename the server name?
View 1 Replies
View Related
Dec 20, 2012
We are running ACS 4.0 so understandably so we are looking to upgrading to a Cisco supportable version of ACS. The limitation of our current version of ACS does not support nested AD groups. The latest version of ACS (I think it is 5.4) will?
View 1 Replies
View Related
Apr 22, 2011
i have installed system (Windows Server 2003) and i have configure Active directory for testing and configure one user under it ( TEST01)now on the same machine i have installed Cisco ACS 4.2.i'm trying to Authenticate (TEST01) using ACS but it's not working, i can't even see the logs under EVENTVIWER. simple and easy to configure since both AD and ACS is on the same machine.
View 4 Replies
View Related
Jan 28, 2013
I am using ACS 5.3 What I am about is setting user authentication against existence of the user in specific AD group, not just being a member in any AD. What is happening now, users get authenticated as long as they exists in the AD, luckily they fail on authorization, as it is bound to specific AD group.
how can I bind the authentication aginst specific group in AD, not just using AD1 as the identity source.
View 1 Replies
View Related
Jul 5, 2010
I just upgraded my ACS v4.0 to the latest available version v4.2(1) build 15 patch 2 and I've got some trouble with the CSLog service. I performed a successive upgrade first to v4.2 then to v4.2.1 and finally applied the two patches. Everything is working fine, I'm using both radius and tacacs services and they doing great like they were in v4.0. The only problem I have is with Cslog service which doesn't start. To be accurate, it starts but stops just after. I've uploaded some logs from cslog.log in cslog/logs directory.
View 6 Replies
View Related
Dec 12, 2011
I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group: Admin > Network > Notification and Action Settings > Fault Notification Group
View 3 Replies
View Related
May 4, 2011
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
View 1 Replies
View Related
Aug 26, 2012
Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
5508 controller
7.2.110.0 code
6 buildings
6 interface groups
1 ssid
View 4 Replies
View Related
Apr 3, 2013
Where are the AP groups in PI 1.3 ?The documentation in PI 1.3 states
Step 1 Choose Configure > Controller Template Launch Pad.
Step 2 Click AP Groups or choose WLAN > AP Groups from the left sidebar menu.
AP groups in the controller itself shows the applied template names, but there are no templates?
View 4 Replies
View Related
May 13, 2012
I have Cisco LMS 4.0, I have a few tasks which are scheduler every friday and they failed last week. This morning I would like to restart them but I cannon see the devices in my Groups.Under Inventory -> Manage Device State -> User Definied Groups -> I can see my groups but they are empty!I restarted the server and crmdmgtd service but it's not better.
View 5 Replies
View Related
Dec 6, 2011
I has got a 8 system(Say Node1, Node2,.....,Node7,Node8) in my LAN Network.i Want a Group a 8 System's in Such a way that Node 2 Should Ping with Node1,Node3 Node4, But not with Node 5,Node 6,Node 7,Node 8.
View 2 Replies
View Related
Sep 14, 2011
I have a LAN with 6 PCs and a DELL Poweredge 2900 running SBS 2003. I have a NAS device but am having trouble setting it up. The device is a INNS04-4200. When I connect it to the ethernet cable (and I've tried 3 that were ok with other devices) the NAS software can't see the storage device and I can't work out how to get on to it using a browser.This is a link to the manual: url...The NAS has had a factory reset, but I can't work out how to connect to it to name it etc?
View 19 Replies
View Related
Jan 10, 2012
Is it possible on an Cisco Router to build WebVPN groups ? I want build one group for users with grand access rights.
--> Connect with anyconnect or Web Portal and have access to all Servers on 10.0.0.0 Network.
And another group for users with limited access priveleges.
--> Connect with anyconnect or Web Portal and can access only Server 10.0.0.10 Port XXXX and Server 10.0.0.20 on Port XXXX
Info: i have an 881GW Router.
View 1 Replies
View Related
Oct 23, 2011
Have a setup for Cisco LMS3.2.1 which is a recent upgrade, also RME 4.3.2 and CM 5.2.2. Is it possible for the DFM to generate alerts such as email notification to user defined group (subnet grouped). These alerts should be critical in in nature.
View 1 Replies
View Related
Nov 20, 2011
I have a new deployment of 44 3502i AP's in 3 buildings at one of my campus'.The 5508 wlc is running latest 7.0.116.0 code.I have some users who take their work with them as they go from location to location on this campus.They need to be able to smoothly switch from AP to AP without having to reauthenticate each time the next AP takes over in the handoff.On the ssid in question we run 802.1x back to 1 auth server; there is no failover auth server.All APs are in one AP Group.My thought is to add all 44 of the APs to one HREAP Group.
View 4 Replies
View Related
Jan 23, 2012
I have seen some discussion in the forums regarding user defined groups being empty in LMS 4.0 but not 4.1. I am having this issue in 4.1. Under User Defined groups, I have created 2 logical groups named "Physical Location" and "Switches". These do not contain any actual devices, they are just containers for other groups. Under the Physical Location logical group I have created 2 other groups, Acuna and Hampton. Under the Switches group I have also created 2 groups, HDM and HHC. The criterion for the Physical Location group is based on the first 3 characters of the hostname:
Device.System.Name startswith "hdm"
The criterion for the Switches group is based on the value of a user defined field, Admin_responsibility:
Device.Admin_responsibility equals "HDM"
The Physical Location groups work - the Switches group does not. Both the HDM and the HHC group should contain several devices. The HDM group contains 2, the HHC contains none. If I edit the groups and click "next" until I get to step 3, Membership: Edit, the "objects matching criteria" list is fully populated - it contains the devices that it should contain. However, after I click "Finish" and go to Inventory => Add / Import / Manage Devices there is no change in group membership - the HDM group contains 2 devices and the HHC group contains none.
View 4 Replies
View Related
Sep 11, 2012
I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies
View Related
