2003 SBS Can't See NAS On LAN
Sep 14, 2011
I have a LAN with 6 PCs and a DELL Poweredge 2900 running SBS 2003. I have a NAS device but am having trouble setting it up. The device is a INNS04-4200. When I connect it to the ethernet cable (and I've tried 3 that were ok with other devices) the NAS software can't see the storage device and I can't work out how to get on to it using a browser.This is a link to the manual: url...The NAS has had a factory reset, but I can't work out how to connect to it to name it etc?
View 19 Replies
ADVERTISEMENT
Nov 14, 2011
Is it possible to use Server 2003 SMB with IAS WITHOUT a certificate? So someone with a laptop could get on the WLAN with their AD credentials without me giving them a cert?
View 13 Replies
View Related
Mar 14, 2013
I'm currently in the process of replacing SBS 2003 x 64 on my Poweredge 2900 server. I would prefer to upgrade to Windows 7 x 64, but would do XP in a pinch.
View 4 Replies
View Related
Jul 20, 2011
our 2003 server is desktop without wireless but it still shows "WAN" connected along with "LAN" connected when I open "view network connections" window. How is that possible?
View 6 Replies
View Related
Sep 18, 2011
How do I disable ICF In windows 2003
View 1 Replies
View Related
Sep 14, 2012
I can't remote to server 2003. On the server, the Enable Remote Desktop is gray out with a check mark. On the remote assistance it is not gray out with a check mark. when Remote desktop connection from a workstation here is the message error.Remote desktop can't connect to the remote for one of these reason.
1)Remote access to the server is no enabled
2)The remote computer is turned off
2)The remote computer is not available on the network.
Make sure the remote computer is turned on and connected to the server, and that remote access is enabled.
View 3 Replies
View Related
Jul 23, 2011
i have server 2003 sp2 with "AD " , every thing was working just fine until yesterday the server goes down i cannot ping the "server"or its ip from any PC and i cannot ping any thing from the server only it can ping itself "localhost ,server, 192.168.1.1, 127.0.0.1 " when the problem happens it checked the server and the ipconfig was chenged to :
192.168.1.1
255.255.255.0
192.168.1.254
127.0.0.1
8.8.8.8
the DNs server was changed ! now my server is clean and i reconfig my dns server but no dns is working in my network the AD server or the DSL router/
View 10 Replies
View Related
Feb 20, 2012
How to update windows 2003 from a CD.
View 2 Replies
View Related
Jun 26, 2012
We're having problems access 'our own' externally hosted website with SBS 2003. I know this is commonly a DNS issue, but I cannot for the life of me get to the bottom of this. The site is hosted on a web host
Here are the facts:
- SBS 2003 w/single NIC. D-LINK DIR-655 router.
- DNS internally is handled by SBS, DNS forwarders set in order: 208.67.222.222, 208.67.220.220 (OpenDNS Servers)
- Trying to browse website from the SBS server or any other machine on network
- Gateway is router (192.168.1.1)
- Trying to access our own web site, hosted by a 3rd party. Trying both example.com and www.example.com - Both are simply redirected to search pages.
- Trying to get to OTHER websites hosted on this same IP also fail
Problem description:
1 - Website works fine outside this network (i.e., from my house, other sites)
2 - Pinging example.com resolves to correct IP and responses are received
3 - Nslookup resolves correct IP
4 - Trace resolves correct IP and completes successfully
Troubleshooting steps:
1 - ipconfig/flushdns
2 - Restarting DNS service on SBS 2003 server
3 - Adding host entry for the domain/IP
4 - Restarted SBS 2003 server
5 - Adding forward lookup zone for example.com > adding A record for www pointing to IP
View 19 Replies
View Related
Mar 16, 2011
how can i add 10 pc's to server 2003 domain
View 1 Replies
View Related
Apr 14, 2011
sbs 2003 never had updates installed till now and required reboot. it took 3 hrs to startup and now i just logon and it is still applying computer settings. i booted to safemode and changed DNS and still slow logon - going on 45min.
View 1 Replies
View Related
Apr 19, 2011
I am running Windows Server 2003 with a wired connection to a Linksys router. I can ping the router and other websites; however, I only get about 3 out of 4 replies. I can't get on the internet via any web browser. Strangely enough, Skype works
View 3 Replies
View Related
May 16, 2012
I can see all the shared folders including mine on my workstation but can not access mine.what what is wrong or how do a reset set it so that it can ask for my password in order to access my folder?
View 1 Replies
View Related
Nov 23, 2011
I have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
View 5 Replies
View Related
Apr 5, 2011
I'm using 2003 server for DHCP settings. I don't want some computers to get ip address automatically but if they put manually ip address, it's ok, they can connect.How it can be done?I mean when those computers try to connect for wireless, they should not get any ip address (so internet) until they put manually ip address, default gateway and dns server.
View 3 Replies
View Related
May 16, 2012
I want to limit the concurrent login my users can have. I have downloaded and installed Limit Login from Microsoft and followed the directions to a T. However, when users login it doesn't do anything. The scripts don't run (I have them listed in the logon and logoff scripts for users in the default domain policy). The scripts are stored in a share that everyone has read access to. What am I doing wrong? I have installed and uninstalled a million times following the MS directions included with the software to the letter, but it won't work. At one time I had it working and then we had some network problems with profiles and it got messed up in that process. Now I'm trying to get it back, but can't. Even uninstalling and reinstalling.
View 2 Replies
View Related
Sep 1, 2011
on a network l can't access windows 2003 server, but l can access xp from windows 2003 server
View 1 Replies
View Related
Jul 11, 2011
I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies
View Related
Mar 13, 2012
How is it possible to use OWA / SSO with Webvpn? I'm already configure the bookmark as below
Configuration -> Remote Access VPN -> Clientless SSL VPN Access -> Portal -> Bookmarks -> Add/Edit your Bookmarks URL:
Advanced Options: Post
destination : URL : 0 username : <yourdomain>CSCO_WEBVPN_USERNAME password : CSCO_WEBVPN_PASSWORD SubmitCreds : Login trusted : 0
But it didn't work. The users are authenticated using LDAP.
View 2 Replies
View Related
Aug 23, 2012
I am trying to lab up an ACS5.2 with windows 2003 AD for PEAP authentication. But my ACS does not join the AD and throws an error "can not resolve network address". But when i do an nslookup on ACS CLI , the same domain wireless.abc.com is returning with the IP address of my AD. I think i am missing something in windows AD/DNS configs here as i am not a windows AD expert.
1) My AD domain is wireless.abc.com. In my DNS, i have a zone called wireless.abc.com. and i have added "New Host" in that DNS zone with the "name" as blank and providing IP address of my AD (AD and DNS are on same windows installation) . Is this the right way to do ?
2) I should be entering "wireless.abc.com" in the ACS active directory domain name field and do test connection. right ?
View 15 Replies
View Related
Feb 27, 2011
I am in the process of setting up an ACS evaluation that will authenticate against a Windows 2003 AD. I am currently testing this with AAA TACACS+ but will evenutally setup 802.1x authentication. My problem however seems to be between the ACS and AD.
I have the AD External Identity store configured and successfully tested for connectivity. I created a shell profile and a command set and also created an access ploicy for Device Admin. I added the AAA commands to my test switch and do get prompted for username and password. This is where my issue starts. Regardless of what username and passwword I enter, I always fail authentication. At least that is what is in the reports and I have 0 hits on my Access and Authorization policy rule. I am using as basic as a config as I can get with simply using a contains from one of the groups I am in for the policy rule. I had a non-AD admin account to start with thinking maybe a rights issue with the AD account but have moved to an AD admin account with no change in the results. I saw a post somewhere that the time stamps on the AD server and the ACS had to almost be perfect and recommended that NTP for ACS be the AD server as that could cause issues and I have done that as well with no change. I am wondering if there is something specific I needed to configure or something I missed between the ACS and the AD? Is there a way I can display what is passed back and forth between the ACS, or the switch, and AD to verify content? I put a call into my local SE and he is as puzzled as I am.
View 1 Replies
View Related
Aug 23, 2011
how to block bad websites from windows server 2003
View 2 Replies
View Related
Jun 22, 2012
Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies
View Related
Sep 5, 2012
I have a server 2003 r2 machine connected on a LAN.the server is used for data storage and the local workstations use the data on mapped drives.When the server is connected to the internet ... all of the workstations on the lan partially lose the internet.When i ping google while the server is connected to the internet I get 50% to 75% loss.When I disable the LAN adapter on sevrer- alll the workstations on lan have 0% loss.When I enable lan adapter on server and configure tcpip and for primary dns i enter 1.1.1.1 ,I still get 0% loss,when I enter 8.8.8.8 for primary dns the problem persists/It kind of sounds like a virus on server causing very heavy traffic?
View 3 Replies
View Related
Feb 19, 2011
how to install vpn on windows server 2003
View 1 Replies
View Related
May 21, 2012
how to view what is displayed on xpclient on server 2003
View 1 Replies
View Related
Aug 29, 2011
can you show me some screen shots on how to share file in the windows 2003 server operating system?
View 1 Replies
View Related
Feb 21, 2011
The network seems to be working alright but we did have trouble with the internet on client machines being slow and timing out all the time.After a lot of trouble shooting I ended up changing the forwarders to OpenDNS instead of the ISP DNS and everything thing seems to be working now.
View 6 Replies
View Related
May 22, 2011
I have a 2003 standard machine with networking issues. the nic shows that it is connected and it received the correct DHCP ip from the router but i can't ping the router or any other ip on the network.i ran a TCP/IP fix, Winstock Fix, LSP Fix, checked the services that starts up, checked the startup programs, turned the firewall off, checked in advanced settings on the nic if the correct order is there. the funny thing is that in safe mode with networking it works like a charm but not when i boot in to windows normally.If i ping the router it just shows destination host unreachable.
View 3 Replies
View Related
Jan 12, 2012
Windows Server 2003, XP and W7 desktops. I have a growing number of user folders that are seemingly in the wrong place. When I am looking at the directories locally on the server, there are some document folders that are directly in the Users folder, rather than existing as subfolders within a user's folder. In fact, the user's folder is not present at all. So rather than Joe Smith's folder structure being 'Users/jsmith/', there are a series of folders under 'Users' that are named 'Documents'. As I click on each one though, I see in the address bar 'Users/jsmith' etc. In the tree, there is no folder named jsmith, but in the address bar there is. And in the address bar, there is no folder named 'Documents'.This seems to be limited to newer users and older users who have Windows 7 PCs, but I don't know for sure if that's the source of the change.
View 2 Replies
View Related
Aug 14, 2005
When trying to do a cut-n-paste enrollment of a cisco 3725 router with a microsoft windows server 2003 CA i get the following error on the CA.Certificate Services denied request 8675 because The request subject name is invalid or too long. 0x80094001 (-2146877439). The request was for OID.1.2.840.113549.1.9.2=rtr31slied3.unit4agresso.com. Additional information: Error Constructing or Publishing Certificate This is when i use the router or webserver certificate.The only template that does work is the user certificate but then you get error messages that the router name doesnt match the cert name.The 3725 is running ios version 12.3(14)T3.How can we get the right templates to work ?
View 3 Replies
View Related
Dec 26, 2010
In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies
View Related
Jan 2, 2011
i have configured windows 2003 server with DNS ,Active directory users and dhcp server. and configured my cisco 1130g AP .i have installed cisco access control server 4.0 because i use LEAP authentication protocol and for the ACS for network configuration i give aaa client ip addresss as AP interface ip and same shared secret for the AP and ACS,.so when i log to wifi it ask username and password problem is lap top cannot have a ip address my dhcp server not issue any ip address .my hiper terminal massage is like this when i connect to wifi?
View 17 Replies
View Related
