Server 2003 Network Connected But No Traffic
May 22, 2011
I have a 2003 standard machine with networking issues. the nic shows that it is connected and it received the correct DHCP ip from the router but i can't ping the router or any other ip on the network.i ran a TCP/IP fix, Winstock Fix, LSP Fix, checked the services that starts up, checked the startup programs, turned the firewall off, checked in advanced settings on the nic if the correct order is there. the funny thing is that in safe mode with networking it works like a charm but not when i boot in to windows normally.If i ping the router it just shows destination host unreachable.
View 3 Replies
ADVERTISEMENT
Jul 20, 2011
our 2003 server is desktop without wireless but it still shows "WAN" connected along with "LAN" connected when I open "view network connections" window. How is that possible?
View 6 Replies
View Related
Sep 5, 2012
I have a server 2003 r2 machine connected on a LAN.the server is used for data storage and the local workstations use the data on mapped drives.When the server is connected to the internet ... all of the workstations on the lan partially lose the internet.When i ping google while the server is connected to the internet I get 50% to 75% loss.When I disable the LAN adapter on sevrer- alll the workstations on lan have 0% loss.When I enable lan adapter on server and configure tcpip and for primary dns i enter 1.1.1.1 ,I still get 0% loss,when I enter 8.8.8.8 for primary dns the problem persists/It kind of sounds like a virus on server causing very heavy traffic?
View 3 Replies
View Related
Apr 25, 2011
Network is slow. Can't connect to our windows 2003 server.
View 3 Replies
View Related
Apr 21, 2011
can I add a server 2003 on my home wireless network (4 computers) to run a website. I am trying to redirect a AU domain to 2003 server
View 2 Replies
View Related
Sep 5, 2012
So I just installed Windows Server 2003 64 bit on an older HP Proliant DL360 G5 and am trying to connect it to my network but neither of the 2 NIC's are showing up under Network Connections... the only option I am given is the ''Add Network Places Wizard''.
I have an ethernet cable plugged into NIC 1 and the LED's work so I know it's not a bad NIC card- do I have to download drivers for the NIC? Do I download them to a USB/CD and then just boot from that?
View 1 Replies
View Related
Oct 10, 2012
I want remove saved passwords in 2003 server with which XP clients login
View 1 Replies
View Related
Feb 8, 2011
Network connections lost Windows 2003 Server, Reload Drivers Still not working.
View 28 Replies
View Related
Sep 19, 2012
I am trying to configure a 2901 router to act as NTP server on my network.This set "ntp master" in the router.I have no possibility to access an NTP server on the Internet.Now I want to configure a Windows 2003 DC to update the time from the NTP Server (router 2901).In Windows 2003, the registry value "Ntp Server" may have to be IP addresses or FQDN? (In my case I put router_ip_address, 0x1) 0x1 = use this "SpecialPollInterval" to update the time? Where you can find that these actions mean "next action is 3"? In Event Log in Windows 2003 DC receipt Event ID 35:The time service is now synchronizing the system time with the time source ROUTER2901_IP (ntp.m | 0x1 | W2K3_SERVER_IP: 123 -> ROUTER2901_IP: 123).Configure "Special Poll Interval" in 10 seconds.But the time on the Windows Server 2003 DC continuous five minutes ahead of time compared to the 2901 router.
View 2 Replies
View Related
Aug 12, 2009
I have a Dell PowerEdge 2800 (Just reinstalled windows Server 2003) I have tried the two (non lan) network driver setups that dell has on its site and I get "the update package is not compatible with your system configuration".
I am trying to access the internet on my box, how to accomplish this or fix the problem I'm getting while loading driver setup?
View 2 Replies
View Related
Oct 2, 2012
I've got a Dimension 8300 which I loaded Windows Server 2003. I've looked high and low for a compatible network driver with no luck.
I've attempted to install WinXP drivers as I've read that it worked for others in the past... no luck for me though. I've also tried a number of different chipset drivers without any luck.
View 3 Replies
View Related
Sep 29, 2011
i am facing the same problem now but am using windows 2003 server
View 1 Replies
View Related
Sep 17, 2012
I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
View 1 Replies
View Related
Aug 28, 2012
After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies
View Related
Nov 14, 2011
Is it possible to use Server 2003 SMB with IAS WITHOUT a certificate? So someone with a laptop could get on the WLAN with their AD credentials without me giving them a cert?
View 13 Replies
View Related
Sep 14, 2012
I can't remote to server 2003. On the server, the Enable Remote Desktop is gray out with a check mark. On the remote assistance it is not gray out with a check mark. when Remote desktop connection from a workstation here is the message error.Remote desktop can't connect to the remote for one of these reason.
1)Remote access to the server is no enabled
2)The remote computer is turned off
2)The remote computer is not available on the network.
Make sure the remote computer is turned on and connected to the server, and that remote access is enabled.
View 3 Replies
View Related
Jul 23, 2011
i have server 2003 sp2 with "AD " , every thing was working just fine until yesterday the server goes down i cannot ping the "server"or its ip from any PC and i cannot ping any thing from the server only it can ping itself "localhost ,server, 192.168.1.1, 127.0.0.1 " when the problem happens it checked the server and the ipconfig was chenged to :
192.168.1.1
255.255.255.0
192.168.1.254
127.0.0.1
8.8.8.8
the DNs server was changed ! now my server is clean and i reconfig my dns server but no dns is working in my network the AD server or the DSL router/
View 10 Replies
View Related
Sep 13, 2011
I configured ASA5520 and RV042 for site-to-site IPSec VPN tunnel.Tunnel get connected, but no ping, no traffic between both end network.
Network:
=======
192.168.113.0/24----------192.168.113.6 -ASA--------public, static IP address------Cisco 2821--------Internet
192.168.10.0/24-----------192.168.10.1 -RV042-----public, static IP address------Cisco 2821--------Internet
ASA5520 config:
----------------------
name 192.168.10.0 VPN
!
interface GigabitEthernet0/1
nameif NET
security-level 100
ip address 192.168.113.6 255.255.255.0
[code]....
View 5 Replies
View Related
Mar 16, 2011
how can i add 10 pc's to server 2003 domain
View 1 Replies
View Related
Apr 19, 2011
I am running Windows Server 2003 with a wired connection to a Linksys router. I can ping the router and other websites; however, I only get about 3 out of 4 replies. I can't get on the internet via any web browser. Strangely enough, Skype works
View 3 Replies
View Related
May 16, 2012
I can see all the shared folders including mine on my workstation but can not access mine.what what is wrong or how do a reset set it so that it can ask for my password in order to access my folder?
View 1 Replies
View Related
Nov 23, 2011
I have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
View 5 Replies
View Related
Apr 5, 2011
I'm using 2003 server for DHCP settings. I don't want some computers to get ip address automatically but if they put manually ip address, it's ok, they can connect.How it can be done?I mean when those computers try to connect for wireless, they should not get any ip address (so internet) until they put manually ip address, default gateway and dns server.
View 3 Replies
View Related
Sep 1, 2011
on a network l can't access windows 2003 server, but l can access xp from windows 2003 server
View 1 Replies
View Related
Jul 11, 2011
I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies
View Related
Apr 28, 2011
I am supporting a small call center of all Win7 machines. There is no server in house as everything is web based. Anyway, we want to find the bandwidth hogs and programs that I am used to using require servers for monitoring web traffic.
Are there any devices or software that is not a fortune that can give details on bandwidth usage?
View 1 Replies
View Related
Jun 22, 2012
Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies
View Related
Feb 19, 2011
how to install vpn on windows server 2003
View 1 Replies
View Related
May 21, 2012
how to view what is displayed on xpclient on server 2003
View 1 Replies
View Related
Aug 29, 2011
can you show me some screen shots on how to share file in the windows 2003 server operating system?
View 1 Replies
View Related
Jan 12, 2012
Windows Server 2003, XP and W7 desktops. I have a growing number of user folders that are seemingly in the wrong place. When I am looking at the directories locally on the server, there are some document folders that are directly in the Users folder, rather than existing as subfolders within a user's folder. In fact, the user's folder is not present at all. So rather than Joe Smith's folder structure being 'Users/jsmith/', there are a series of folders under 'Users' that are named 'Documents'. As I click on each one though, I see in the address bar 'Users/jsmith' etc. In the tree, there is no folder named jsmith, but in the address bar there is. And in the address bar, there is no folder named 'Documents'.This seems to be limited to newer users and older users who have Windows 7 PCs, but I don't know for sure if that's the source of the change.
View 2 Replies
View Related
Dec 26, 2010
In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies
View Related
Feb 2, 2011
A windows server (W2000) acting as remote access server (The LAN we are trying to reach is behind this equipment). In other site we have a 881 ISR.I need to configure a VPN between the Server and the CISCO. The goal is to access from the PC behind the CISCO to the corporative LAN where the access server sits on without install the CISCO client in every client PC.
View 1 Replies
View Related
