View Display From Xp Client In Server 2003?
May 21, 2012how to view what is displayed on xpclient on server 2003
View 1 Replies
ADVERTISEMENT
Windows 2003 Server - Dhcp Server Cannot Ping Client
Sep 29, 2011i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedServers :: Change A Windows 2003 Server Name Through Client?
Mar 8, 2011how to change a windows 2003 server name through client
View 1 Replies View RelatedUsing LAN Connection Can't Ping Client On Windows Server 2003
Nov 20, 2011Why i can't ping client to server using LAN connection. but i can ping server to client. i use windows server 2003 as a server.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 - Client List Will Not Display
May 23, 2011I picked up an E1200 and set it up successfully. I am using wireless MAC filtering, and decided to pull up the list of connected wireless clients (Wireless >> Wireless MAC Filter >> push "Wireless Client List" button).Immediately after this the Web UI of the E1200 becomes inaccessible. It still routes traffic, and the router remains pingable, but it will not allow access to the Web UI for several minutes. The error that appears upon attempt to access the Web UI during this time window is similar to the above, but reads "Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection."
I have tried this in Google Chrome, Firefox 4, and MSIE on two separate computers. Each browser displays the error a bit differently (MSIE, for example, just says it can't display the page and gives no further detail) but the net results are always the same. I have tried resetting the device to factory defaults in addition to re-downloading the firmware from the Cisco/Linksys website and installing it. No improvement.
I have also noted that the Log (Administration >> Log; and yes, I have it enabled) doesn't appear to be picking up anything at all. In fact, the Security log, which supposedly (according to the Help) "displays the login information for the Router’s browser-based utility," is also blank.
Cisco VPN :: ASA5510 / SSL VPN With Anyconnect Client - Login Page Does Not Display
Mar 18, 2012I have an ASA5510 that I am trying to set up for remote access using SSL VPN with the anyconnect client. I have followed the config guides on the Cisco website as well as the config guides elsewhere on the internet to no avail. When going to https://(outsdie interface ip address),I get nothing, the browser never loads a page. Here are the commands I have entered:
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.3046-k9.pkg 1
svc image disk0:/anyconnect-macosx-powerpc-2.5.3046-k9.pkg 2
svc image disk0:/anyconnect-macosx-i386-2.5.3046-k9.pkg 3
svc enable
tunnel-group-list enable
[code]....
Want To Connect Server With Windows Server 2003
Aug 28, 2012After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedUse Server 2003 SMB With IAS Without A Certificate?
Nov 14, 2011Is it possible to use Server 2003 SMB with IAS WITHOUT a certificate? So someone with a laptop could get on the WLAN with their AD credentials without me giving them a cert?
View 13 Replies View RelatedHow WAN Is Connected In 2003 Server
Jul 20, 2011our 2003 server is desktop without wireless but it still shows "WAN" connected along with "LAN" connected when I open "view network connections" window. How is that possible?
View 6 Replies View RelatedCan't Remote To Server 2003
Sep 14, 2012I can't remote to server 2003. On the server, the Enable Remote Desktop is gray out with a check mark. On the remote assistance it is not gray out with a check mark. when Remote desktop connection from a workstation here is the message error.Remote desktop can't connect to the remote for one of these reason.
1)Remote access to the server is no enabled
2)The remote computer is turned off
2)The remote computer is not available on the network.
Make sure the remote computer is turned on and connected to the server, and that remote access is enabled.
Cannot Ping From Or To Server 2003 Sp2
Jul 23, 2011i have server 2003 sp2 with "AD " , every thing was working just fine until yesterday the server goes down i cannot ping the "server"or its ip from any PC and i cannot ping any thing from the server only it can ping itself "localhost ,server, 192.168.1.1, 127.0.0.1 " when the problem happens it checked the server and the ipconfig was chenged to :
192.168.1.1
255.255.255.0
192.168.1.254
127.0.0.1
8.8.8.8
the DNs server was changed ! now my server is clean and i reconfig my dns server but no dns is working in my network the AD server or the DSL router/
Servers :: How To Add 10 PC's To Server 2003 Domain
Mar 16, 2011how can i add 10 pc's to server 2003 domain
View 1 Replies View RelatedServer 2003 Can't Connect To The Internet?
Apr 19, 2011I am running Windows Server 2003 with a wired connection to a Linksys router. I can ping the router and other websites; however, I only get about 3 out of 4 replies. I can't get on the internet via any web browser. Strangely enough, Skype works
View 3 Replies View RelatedShared Folders On Server 2003
May 16, 2012I can see all the shared folders including mine on my workstation but can not access mine.what what is wrong or how do a reset set it so that it can ask for my password in order to access my folder?
View 1 Replies View RelatedJoin Windows 7 With AD 2003 Server?
Nov 23, 2011I have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
View 5 Replies View RelatedBlock Getting Ip From 2003 DHCP Server?
Apr 5, 2011I'm using 2003 server for DHCP settings. I don't want some computers to get ip address automatically but if they put manually ip address, it's ok, they can connect.How it can be done?I mean when those computers try to connect for wireless, they should not get any ip address (so internet) until they put manually ip address, default gateway and dns server.
View 3 Replies View RelatedXP Can't Access Windows 2003 Server?
Sep 1, 2011on a network l can't access windows 2003 server, but l can access xp from windows 2003 server
View 1 Replies View RelatedWindows 2003 Cannot Ping Server?
Jul 11, 2011I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies View RelatedReplace Adc Server In Windows 2003 Domain?
Jun 22, 2012Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View RelatedServer 2003 R2 - Internet Disconnects When Its Connected
Sep 5, 2012I have a server 2003 r2 machine connected on a LAN.the server is used for data storage and the local workstations use the data on mapped drives.When the server is connected to the internet ... all of the workstations on the lan partially lose the internet.When i ping google while the server is connected to the internet I get 50% to 75% loss.When I disable the LAN adapter on sevrer- alll the workstations on lan have 0% loss.When I enable lan adapter on server and configure tcpip and for primary dns i enter 1.1.1.1 ,I still get 0% loss,when I enter 8.8.8.8 for primary dns the problem persists/It kind of sounds like a virus on server causing very heavy traffic?
View 3 Replies View RelatedServers :: How To Install Vpn On Windows Server 2003
Feb 19, 2011how to install vpn on windows server 2003
View 1 Replies View RelatedFile Sharing Windows 2003 Server?
Aug 29, 2011can you show me some screen shots on how to share file in the windows 2003 server operating system?
View 1 Replies View RelatedServer 2003 Network Connected But No Traffic
May 22, 2011I have a 2003 standard machine with networking issues. the nic shows that it is connected and it received the correct DHCP ip from the router but i can't ping the router or any other ip on the network.i ran a TCP/IP fix, Winstock Fix, LSP Fix, checked the services that starts up, checked the startup programs, turned the firewall off, checked in advanced settings on the nic if the correct order is there. the funny thing is that in safe mode with networking it works like a charm but not when i boot in to windows normally.If i ping the router it just shows destination host unreachable.
View 3 Replies View RelatedUser Folders Moved In Server 2003
Jan 12, 2012Windows Server 2003, XP and W7 desktops. I have a growing number of user folders that are seemingly in the wrong place. When I am looking at the directories locally on the server, there are some document folders that are directly in the Users folder, rather than existing as subfolders within a user's folder. In fact, the user's folder is not present at all. So rather than Joe Smith's folder structure being 'Users/jsmith/', there are a series of folders under 'Users' that are named 'Documents'. As I click on each one though, I see in the address bar 'Users/jsmith' etc. In the tree, there is no folder named jsmith, but in the address bar there is. And in the address bar, there is no folder named 'Documents'.This seems to be limited to newer users and older users who have Windows 7 PCs, but I don't know for sure if that's the source of the change.
View 2 Replies View RelatedCisco :: LMS 3.2 With Microsoft Windows 2003 Server
Dec 26, 2010In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies View RelatedCisco VPN :: Windows Server 2003 VPN With ISR881
Feb 2, 2011A windows server (W2000) acting as remote access server (The LAN we are trying to reach is behind this equipment). In other site we have a 881 ISR.I need to configure a VPN between the Server and the CISCO. The goal is to access from the PC behind the CISCO to the corporative LAN where the access server sits on without install the CISCO client in every client PC.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: How To Install ACS 4.2 On Server 2003
Oct 17, 2011I'm curently studying for my CCNP Switch certfification, and I'm learning about RADIUS and AAA. I need to practice this topics, but unfortunately I can't find any way to do it. I have cisco ACS 4.2 but I'm unable to install it on my Server 2003 (it says mmc.exe needs to be closed, tried some things but no luck...). I'm unaware of any simulator for RADIUS or anything similar.
how to install ACS 4.2 on Server 2003 (how to solve the error I'm recieving), or point me towards some other product to practise RADIUS and AAA authentication
Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedWireless Internet Is Connected But Webpage Display No Server?
Apr 27, 2012I have netbook with win xp It is connected wirelessly to modem the internet was working until we upgraded the modem , now i see on the netbook that it is connected to internet but when i open internet page it dispays server not found I tried the answers posted to repair ip or winsock but it didn't work
View 20 Replies View RelatedCisco :: Connect The Router To Windows Server 2003?
Apr 9, 2012I'm having trouble to connect the router to windows server 2003 ( I set up this latter as a router) I have also set up the loopback
View 4 Replies View RelatedServers :: Step To Configure LAN In Windows Server 2003
Apr 25, 2011In my collage i have a LAN to the wind server 2003 again i m also configure a small LAN may be take a 5 computer but the communication is not done.
View 1 Replies View RelatedConnect To Wireless 2003 Server - Network Very Slow
Apr 25, 2011Network is slow. Can't connect to our windows 2003 server.
Server 2003 Forgetting Permissions - Access Denied
Feb 14, 2011Even though I am an Administrator on the server, sometimes I create files or folder on a network drive and when trying to access them later (or immediately in some cases), I am getting an "Access Denied" box.For example, I just created a folder, moved an item into it, then tried to rename the folder and was denied access.
View 3 Replies View Related