Cisco Application Networking :: Does ACE SM In L2 Mode Need Default Gateway
Jun 6, 2012if ACE SM in L2 mode need the default gateway? We're running v. 3.2a.
View 8 Replies
ADVERTISEMENT
Cisco Application Networking :: ACE 4710 Test Web Servers / Need To Use ACE As Their Default Gateway
May 26, 2011I'm setting up an ACE 4710 in our test lab before deploying in production. Do the test web servers I am using need to use the ACE as their default gateway? The are currently configured to use a multilayer switch on their vlan as their gateway but I'm guessing the ACE needs to see the return traffic for load balancing to work correctly?
View 2 Replies View RelatedCisco Application :: ACE30 - Bridging Using Default Gateway?
Apr 18, 2013I have a strange behaviour with some ACE30 running A5 release :
Setup is in bridge mode, working correctly with a default gateway set in the context.
For some reason, some return traffic is being routed on the ACE instead of being bridged.
On what conditions would the ace decide to route the traffic of simply bridge it from the server vlan to the client vlan.
Cisco Application Networking :: GSS With Or Without ACE4700
May 15, 2013I want to deploy a high availability solution for web servers in two data centers. In the primary data center I have deployed a group of web server and I want two deploy additional servers in a secondary data center for disaster recovery and high availability. Reviewing the documentation, looks like the GSS4492 is the solution for my company needs but I am not sure if I have to implement just the GSS or if I need a ACE4700 integrated with the GSS?.
View 1 Replies View RelatedCisco Application Networking :: ACE20 PAT To Two IP-number
Sep 22, 2011ACE20 module with A2(3.3)I have tried to config a NAT-pool with two adresses, but only one is used.
View 6 Replies View RelatedCisco Application Networking :: Cannot SSH Standby In ACE30
Jul 12, 2012I have a pair of ACE30 in Active/Standby mode. I can ssh to all active contexts. I can also ssh to all standby contexts except one.
View 6 Replies View RelatedCisco Application Networking :: ACE 4710 Rebooting
Apr 19, 2011The below is the display that I get on the screen when i boot the device.There are two error's one is when the daughter card is found and device give us login access after which it reboot’s. The second is stated below (this is a screen copy of the error)
INIT: version 2.85 booting/mnt/cf/TN-CONFIG on /TN-CONFIG type ext3 (rw,sync,loop=/dev/loop0)/mnt/cf/TN-CERTKEY-STORAGE on /TN-CERTKEY-STORAGE type ext3 (rw,sync,loop=/dev/loop1)/mnt/cf/TN-LOGFILE on /TN-LOGFILE type ext3 (rw,sync,loop=/dev/loop2)/mnt/cf/TN-HOME on /TN-HOME type ext3 (rw,sync,loop=/dev/loop3)/mnt/cf/TN-COREFILE on /TN-COREFILE type ext3 (rw,sync,loop=/dev/loop4)insmod: error inserting
[Code]...
Cisco Application Networking :: CSS 11503 And SAN Cert
Oct 14, 2012I know that CSRs cannot be generated with multiple names, but if the SAN is added after the cert is ordered from Geo Trust, Veri sign, etc. can the CSS support using the cert?
View 1 Replies View RelatedThe Default Gateway Is Not Available?
Feb 21, 2013i joined because i keep on having the same problem. i read around the forum a bit before joining and i saw that mcafee was causing the problem for a lot of people. i dont have mcafee so that cant be it several crashes per day. like, literally close to 100 of them.
View 3 Replies View RelatedDefault Gateway Not Available
May 3, 2012Periodically, I drop internet everywhere around my college's campus. I'm literally four feet from a router, but it doesn't seem to matter. I'll disconnect, run troubleshooter, and I'll get the error message saying that the default gateway is not available. My college is designed for Macs, but I'm running Windows 7. My Mac colleagues do not experience problems. The computer works at home and at nearly every other wireless network I've brought it in range of. Specifically, either IBM or Dell.
Dell XPS 15
i7-2720QM
8gb Ram
Windows 7 Home Premium SP 1
540? Something around 500 Nvidia graphics card
Ipconfig results:
Windows IP Configuration
Host Name . . . . . . . . . . . . : George-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code].....
Default Gateway Is Not Available?
Nov 30, 2011I recently got a new laptop and ever since, the internet goes in and out. Most of the time it is not out long enough to display the no connectivity icon or stop music from streaming but it is noticeable. When I run the troubleshooter it says that the default gateway is unavailable. I tried manually setting the connection information but the same thing keeps happening except the troubleshooter then says that DHCP is not enabled. I've disabled every firewall I can find and updated all the drivers available. Here is my info:[CODE]
View 3 Replies View RelatedCisco Application Networking :: Using WAVE-294-K9 As Central Manager
Mar 21, 2012I'm working on a small scale Cisco WAAS deployment. I want to know if it's possible to use the entry level Cisco WAVE-294-K9 as Central Manager.Also about licensing, does this appliance model come with the enterprise level license
View 2 Replies View RelatedCisco Application Networking :: Possible In ACE4710 Appliance To Configure A SIP TLS
Feb 11, 2013Do you know if it is possible in ACE 4710 appliance to configure a SIP TLS ?The SIP probe we have in the configuration guide it is only for clear text. for Lync 2013 we need to establish first a TLS session and then within it, send an SIP request..IS it possible in any version? I tried also to configure a HTTPS probe but it fails as it sends a GET which the Lync SIP server doesn't understand.
View 1 Replies View RelatedCisco Application Networking :: CAT6500 SYSLOG Loadbalancing Using ACE
Mar 17, 2012I want to use the ACE blade in CAT6500 to loadbalancing SYSLOG events towards (SIEM) collectors. Servers and network devices will sent there syslog messages to different collectors after being loadbalanced by ACE. I was just wondering, since a lot of clients are going to sent there complete syslog events to the VIP and thus introducing a high connection rate. (+/- 200.000 CPS) According to the specs, the ACE blade has a limitation of 325.000 connection per second. I suppose this is a limitation at device level. (not on a per context basis, and does that include both TCP and UDP packets?) Could the UDP BOOST feature might come in handy allowing very high rate UDP syslog packet loadbalancing?
View 2 Replies View RelatedCisco Application Networking :: ACE 4700 One-arm Design With SSL Termination?
Sep 17, 2008We are evaluating the one-arm design for the ACE 4700 and need some clarifications:
1. Are there any limitations in the one-arm design and the SSL offloading
2. Can the ACE be configured with an IN and an OUT vlan to the router
CLIENT -> Router -> ACE IN -> ACE OUT -> Router -> Server Vlan
so that the SSL and the clear text traffic is in a separate Vlan?
3. In some sample configuration i saw SNAT configuration on the ACE to modify the client IP. This i assume is for instructing the return traffic from the server to go through ACE? Using SNAT we eliminate the requirement for NAT or PBR on the router? Will i still be able to insert the client IP address after the SSL offload?
Cisco Application Networking :: Will ACE 4710 Support For IPS Features
Aug 16, 2012Will ACE 4710 support for IPS features?
View 1 Replies View RelatedCisco Application Networking :: CSS 11500 Responds For Any Port
Dec 21, 2011We have multiple CSS 11500 clusters. We have found that on all of them, if you try to open a session on any port to an IP address on the backend of the CSS, the CSS will complete the SYN-ACK-ACK session with the client. This happens regardless of whether there is something on that IP address or not.
Coming from any IP, if I try to telnet to ANY IP on the 10.2.2.0 subnet (whether or not there is an actual server on that IP) on any port (whether or not that port is open or not), the CSS will complete the initial connection. I have verified this using telnet to numerous ports and viewing the transaction in a packet capture.
Is there any way to shut this off? This is causing some licensing issues for our security folks that use a vulnerability scanner licensed on number of IP addresses.
Cisco Application Networking :: ACE-20 Crashes NP Core Cause Is Unknown
Apr 25, 2012One of our ACE-20's crash recently with little info as to why - fortunately it was the FT standby module so service wasn't impacted but obviously keen to determine the cause of the crash, and potential resolution.
Running A2 (3.5).
last boot reason: NP 1 Failed : NP Core Reset - Cause Unknown,There is nothing obvious from the switch perspective:
Apr 17 14:52:35.775 bst: SP: The PC in slot 9 is shutting down. Please wait ...
Apr 17 14:52:45.780 bst: SP: PC shutdown completed for module 9
510497: Apr 17 14:52:55.781 bst: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set off (Reset)
510498: Apr 17 14:57:58.277 bst: %DIAG-SP-6-RUN_MINIMUM: Module 9: Running Minimal Diagnostics...
[Code]...
Cisco Application Networking :: How To Setup New ACE 4710 Device
Mar 17, 2013I need to setup new ACE 4710 device , after referring to "Establishing a Console Connection on the ACE" i had managed to set up initial console connection. During installtion i had configured vlan (default vlan 1000) , interface ip adess& subnet mask.
Post initial config i understand i should be able to open' Device Manager GUI Login Window' but it is not opening.I also need inputs on setting 4710 for the telnet connection
Cisco :: ASA 5505 As Default-Gateway?
Mar 28, 2012I am trying to get rid of 2 old 2651xm's and 2 2950's from my CCNA days and want to get into the ASA realm. Can I be able to use the ASA, not only as a security appliance / firewall, but also be able to write the access lists, etc, to be able to use this as my router to push packets to and from my internal LAN to the outside world? I guess I should have stated as this being the front end device to my network, just after my DSL Cable modem, that is..and being the only device. I am trying to have this as my main router /firewall solution and then I have an old Linksys router I will pipe off one of the L2 ports to have an AP for my wireless devices? Is this a real solution an ASA can provide?
View 2 Replies View RelatedCisco :: Cannot Ping Default Gateway From R2 To R
Feb 13, 2013i'm having problem to ping succesfully default gateway on Router1 from Router2. Basically i can: - ping from R1 the serial interface on R2 and default gateway on R2 - telnet from R1 to R2 - ping from R2 to serial link on R1, BUT I CANNOT ping default gateway from R2 to R1 Below is the photo showing topology and running configuration on both routers
View 2 Replies View RelatedCisco WAN :: Can't Use ASA5505 As Default Gateway For LAN
Mar 16, 2011We have a network consisting of a central site and a few remote offices. The sites are all connected via MPLS and also have VPNs over ADSL / internet connections as a backup. The remote offices have Cisco 837 routers for the ADSL connections which we can manage but the MPLS routers are managed by the service provider providing the MPLS connections. At the central site we have a Cisco 891 for the the MPLS connection (which we manage) and a Cisco ASA5505 for the backup VPNs.
In order to implement failover from MPLS to VPN in the event of any MPLS line going down I have tried to use ip sla monitors and tracked objects on the 891 as per Cisco's documentation. The problem that I am finding is that I can't set the number of ICMP echo failures required before the tracked route is dropped. Whenever the ip sla monitor fails to get a response the tracked route is dropped immediately. This is too sensitive as packets are occasionally dropped which results in the routes bouncing back and forth between MPLS and VPN too frequently (disconnecting users in the process).
I have tried different threshold types and values, tried configuring ip sla monitor reaction-triggers (although I don't understand what little documentation that I can find on this) and have even looked at event manager. I have been working on this for a few weeks now and am getting nowhere.
The Cisco ASA5505's implementation of ip sla monitor is much better in that it is possible to specify the number of packets but unfortunately we can't use the ASA as the default gateway for the LAN as the asymmetrical routing that occurs does not work with the firewall function of the ASA.
Any issue with ip sla monitor on IOS and managed to get it working?
No Default Gateway When Hardwired?
Jan 3, 2011When I plug my laptop up to our modem, all i get is local access. IPconfig gives me to default gateway or dns suffix. Naturally there is no wireless. My roomates laptop runs fine wired or not and we have the same set up.Not sure what to do.
View 12 Replies View RelatedDefault Gateway Came Up Empty
Feb 8, 2013I am having issues playing certain games on my ps3. So I've been searching for solutions and I came across a video that wanted me to go to run/cmd/ipconfig. I have little knowledge of computers but I'm not sure that what my ipconfig is showing is supposed to be there. At first I googled and learned about ipv6 addresses because i found that weird but i think that checks out fine. I then googled about the weird numbers and letters in my default gateway and came up empty. Is there a reason thats there?
View 3 Replies View RelatedPossible To Use Ubuntu Box As Default Gateway
Jan 2, 2011I have Squid proxy installed on a ubuntu box here. Currently all my PC's use my ADSL modem as their default gateway but what i wanted to do was see if it was possible to use the ubuntu box as the default gateway, and have it route through Squid to my ADSL modem.
View 3 Replies View RelatedCannot Connect To Default Gateway
May 20, 2011I am trying to change the password on my D-Link router. So i typed ipconfig into cmd and the default gateway i get is 169.234.95.I have tried what used to work at home such as 192.168.0.1 and all of those.
View 9 Replies View RelatedNot Able To Ping Default Gateway
Sep 10, 2012I have a VM server, whose IP is in customer VLAN600 ( 172.60.60.10/24 ) and Peer end is switch then Firewall.Switch is configured with same VLAN600 and learning mac-address of Server on VLAN 600, Firewall is also having VLAN600 and IP is 172.60.60.1/24.Server is not able to Ping/reach Firewall and vice versa.
View 1 Replies View RelatedCannot Connect To Default Gateway?
Dec 18, 2012cannot connect to my default gateway 192.168.1.1 frustrating.
View 1 Replies View RelatedNo Internet Or Default Gateway
May 8, 2011Basically, I'm using a broadband modem, which appears to be connecting fine, with all the required lights being on. My ISP says that, from their end, everything is perfect. Even my laptop shows Local Area Network as connected.However, for some reason, I am not able to access the internet. I was able to use it till last evening, but suddenly the internet stopped working. On Google Chrome, it says that there is no DNS or something.Subsequently, when I tried to access my modem settings, it shows as 'webpage not available'. I then noticed that there is no default gateway! I was able to access it the day before, but now I can't.
View 10 Replies View RelatedDD-WRT WRT150N Default Gateway?
Feb 7, 2012i recently had to do a 30/30/30 reset to my Linksys WRT150N which has DD-WRT installed on it... I can't access the configuration settings on the router by typing in 192.168.1.1. I did IPCONFIG/ALL and couldn't nothing came up for Default Gateway.
View 4 Replies View RelatedError - Default Gateway Is Not Available
Sep 17, 2012It only happens with 1of my laptops, all others have not problems. In the network and sharing ctr, it intermittently says Access type: internet then suddenly I get a no internet access. I've tried release renew DNS, reboot computer, release/renew IP. When it says I have internet access, I attempt to connect to no avail.
View 7 Replies View RelatedCisco Application Networking :: ACE20 - How To Reset Context Configuration
Jul 14, 2011is there a way to reset/clear a particular context's configuration?
I see there is a 'wri erase' within a context, but no reload/reset - neither from the context itself nor from the Admin... puzzling...
I dont want to reload an entire blade just to clear one of the context's configs.
Cisco Application Networking :: CSS11503 To ACE4710 And Server Side NAT
Dec 16, 2012We have a CSS11503 that is currently being used to accept incoming HTTPS and SSH connections on a specific VIP and then PAT those client connections. I understand that it also PATs the server initiated connections. [code]
View 1 Replies View Related