Cisco Firewall :: 2821 - ZBF - Inspection Slows Down HTTP Downloads
Mar 8, 2011I Have a 2821 Router with a IOS Version 12.4(13r)T. When i enabled the firewall, my download speed slows down to 10-20kbps (the normal is 5-6 Mbps).
View 11 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5505 - Http Inspection Dropping All Http Traffic
May 9, 2012I am testing out some inspection options on an ASA 5505, and I am running into a situation in which applying a http inspection is dropping all outbound http traffic. I get a "protocol violation" error in the logs.
Here is the setup: I'm not sure why the web traffic is getting dropped.
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
[Code].....
Cisco Firewall :: HTTP Inspection On ASA 5505
May 3, 2011let me know how to enable HTTP inspection in ASA 5505 through ASDM.
View 1 Replies View RelatedCisco Firewall :: ASA 5500 - HTTP Inspection Spoof Server String
Aug 11, 2011I'm looking fot a way to do static URL blocking with ASA and when the URL is blocked present a "Web Page" to the user saying that it's been blocked.
So, i was wondering if i can use the http parameter "spoof server string" to replace the original URL sent by the user for another URL that points to an internal web server holding a basic page saying "Your URL request has been blocked".
The point is to have a way to tell users that the page they are trying to browse is blocked by a policy.
Linksys Wireless Router :: WRT54G Slows Down Speed And Makes Many Downloads Fail
Jul 25, 2011I can't get utube videos when I'm going through the router. I can get them if I'm on the modem only. The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites. It just slows down eventually to a standstill and the download fails. As stated when the router is not connected the above items pop up or download reasonably quickly through the modem. We have moderate speed DSL.
View 1 Replies View RelatedCisco :: HTTP Inspection URL Filtering On An ASA 5505?
Jan 12, 2011Im trying to configure HTTP Inpsection with regex matching on a ASA 5505 (8.2) so that I can deny all websites apart from google and yahoo. And also enclude host 192.168.1.2 from this inspection. I have been through a number of examples and the syntax below appears correct but appears not to work. The logs report only that traffic has been dropped by the inspection policy.
View 11 Replies View RelatedCisco WAN :: Http Traffic Hanging Through 2821 Router
Mar 28, 2011I'm using a Cisco 2821 router to provide temporary Internet access for a private network of about 300 users for a conference at a hotel. The hotel has provided me a public IP address for the WAN side. On the LAN side I have a 10.x.x.x /8 subnet with the router providing DHCP and NATing (overload) across the WAN interface.
Users can pick up an IP address and access the web. Light web pages such as Google tend to load without issue, however if a user does something that takes more time, such as streaming a Youtube trailer or opening an RDP session, the connection will freeze.
It doesn't appear to be related to bandwidth availability. Pings return on average 10-15 ms. However, I will get a request time out about every 10th continual ping. Steaming video will load about 4-6 seconds worth of data, then will appear to freeze without dropping. Doing something like speedtest.net will send a large amount of data then will hang, without ever ending the conversation.
This doesn't happen when I plug a laptop directly into the hotel public Internet line. They also don't have issues with their network similar to this.
I do not have any ACLs, etc. loaded. The router is basically wide open as far as I can tell. I don't see the router resources getting used much at all.
Cisco Firewall :: 2901 - How To Avoid SMTP Inspection On Zone Based Firewall
Aug 2, 2011We had a problem with SMTP inspection dropping some regular emails (Cisco 2901 IOS 15.0). The original configuration.
View 2 Replies View RelatedCisco Firewall :: 2901 To Avoid SMTP Inspection On Zone Based Firewall
Jun 21, 2011We had a problem with SMTP inspection dropping some regular emails (Cisco 2901 IOS 15.0).Incoming mails are going thru Spam and Virus Blocker so that bypassing SMTP inspection is not security issue in this case.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 - FTP Inspection
May 25, 2011I have multiple customers and servers behind my ASA5510s. After moving a new customer with an FTP server behind the firewalls, they immediatly had issues with customers connecting to their FTP server. I had the default inspection rules running regarding FTP. After removing the "inspect ftp" from the global policy their issues went away. Since this is a larger customer I can't force them to change their server, I need to accomodate and fix this on the firewall. I left the "inspect ftp" command out and there have been sporatic issues from other customers, unable to connect to outside FTP servers from the terminal servers and timeouts and disconnects to our own FTP servers.
This is what I "think" is the solution.. I added a second inspection policy after the default one and only added "inspect ftp" to it. Then I used the "exclude" option to exclude the new customer. That new customer is fine and things are better, but still not working right. Does the following config accomplish what I want?? Does the exclude ACL get what I need or do I need an "include" or permit statement in that ACL?
object-group network DM_INLINE_NETWORK_10 network-object 172.24.X.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data
access-list global_mpc extended deny tcp any object-group DM_INLINE_TCP_1 object-group DM_INLINE_NETWORK_10(code)
Cisco Firewall :: ASA 5520 / How To See / Log Drops Due To Inspection
Jan 29, 2013ASA 5520 running 8.4.5:We had an issue with a remote SMTP connection getting screwed up as a result of ESMPT inspect.It took me 3 hours of troubleshooting the SMTP connection before finally figuring out that the firewall was the culprit. What really through me off was that I saw nothing in the ASA logs (warning and above) that showed packets were being dropped. I'm probably crazy but I thought I remembered seeing entries in the log when packets were dropped due to a type of inspection (specifically, I remember entries in the log saying something to the effect of packet dropped due to ESMPT inspect, packet too big). My quesiton to Cisco TAC was: Is there a simple way to have the log give a warning every time a packet is dropped due to any inspection rule, just like we can see any drops due to ACLs? So far the only answer has been a complex list of log changes to allow debugging and notifications of certain events. This isn't something I want to roll out to all my ASAs.
View 5 Replies View RelatedCisco Firewall :: How To Disable TLS Inspection For SIP On ASA5510
Jun 13, 2012I am using the Cisco ASA5510 for my Telepresent infarstructure. I have a problem with Encrypted SIP calling for call in/out.
Is there is a way to disable the TLS inspection for Cisco ASA5510?
Cisco Firewall :: ASA 8.4x ESMTP Inspection Bug CSCtr92976
Aug 9, 2012We have several customers running ASA 8.4x code and all seem to be plagued with the ESMTP inspection bug CSCtr92976.I have tested this in the lab with an ASA 5505 running 8.4(1), 8.4(2) and 8.4(4)1 & 8.4(4)3 and the behaviour is always the same. I have an Exchange 2007 server and I can see in the logs the following messages:
2012-08-10T13:04:37.331Z,EXCHANGEDefault EXCHANGE,08CF3610468A42D7,3,192.168.102.28:25,192.168.250.26:52756,<,XXXX XXXXXXXXXXXXXXX,
2012-08-10T13:04:42.345Z,EXCHANGEDefault EXCHANGE,08CF3610468A42D7,4,192.168.102.28:25,192.168.250.26:52756,>,500 5.3.3 Unrecognizedcommand, 2012-08-10T13:05:20.506Z,EXCHANGEDefault EXCHANGE,08CF3610468A42D7,5,192.168.102.28:25,192.168.250.26:52756,<,XXX,
This is with the default ESMTP inspection enabled. I have also created a custom ESMTP inspection policy that does nothing but log and the behaviour is still the same. Sometimes traffic will pass but most of the time it won't. The workaround is to just disable the ESMTP inspection.
Cisco Firewall :: RFC2671 / Default ASA DNS Inspection
Sep 21, 2011By default ASA applies DNS packet inspection with a default (maximum) packet size of 512bytes as recommended by RFC 1035, anything above is dropped.
I have a customer that is trying to use larger packet sizes due to extension mechanisms for DNS defined in RFC2671.
My question is , is it safe to increase the default packet size in the DNS inspection thus applied globally for all DNS traffic, or should / can we apply a policy that applies only to this specific customer ?
Cisco Firewall :: No Class Inspection Default On 5505?
May 9, 2012I was under the impression that all Cisco ASA firewalls shipped with a default inspection policy.
Example
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
[Code]......
can I build this myself? Why is it missing (I have two other ASA 5505s here that also do not have it). What would I do to rebuild it?
Cisco Firewall :: Default FWSM 4.1 Inspection Policy
Jan 10, 2011On FWSM (running version 4.1 in my case) the default global policy uses the following class map:class-map inspection_default match default-inspection-traffic
What "default-inspection-traffic" includes? Is it all traffic? If so, do I really want all my traffic to go through the inspection engine? I would imagine this would have a performance impact on traffic that is not part of the protocols being inspected.
Cisco Firewall :: ASA 5520 SIP Inspection Process Is Not Working?
Jul 16, 2009I have an issue with Cisco ASA 5520, The summary is below!
Packet # 1 on inside capture the Call-ID was: Call-ID: 2a54f680-
a5d1de2a-160c-164070a@10.7.100.1
Packet # 1 on outside interface the Call-ID was: Call-ID: 2a54f680-
a5d1de2a-160c-164070a@149.5.33.44 --- this bcz of the inspection.
Packet # 2 on outside capture the Call-ID was: Call-ID: 2a54f680-
a5d1de2a-160c-164070a@149.5.33.44
Packet # 2 on inside capture the Call-ID stay: Call-ID: 2a54f680-
a5d1de2a-160c-164070a@149.5.33.44 --- this is the problem.
(This suppose to be Call-ID: 2a54f680-a5d1de2a-160c-164070a@10.7.100.1)The inspection should change the Call-ID for the incoming packet as it did with the outgoing packet. Whenever, the CM receive the trying message with different Call-ID it considered as new session and it keep sending invitation messages for the SIP provider.NAT is enabled.
Cisco Firewall :: ASA5580-40 Deep Packet Inspection?
Jan 18, 2012I am having issues with PXE boot images for PCs cannot be loaded from remotely.The diagnosis revealed that SunRPC & TFTP were being inspected by ASA causing drop of packets.So I excluded these two inspections for the particular server behind the firewall. It seem to resolve the issue for instance but it crawled back again.
Is there a way that the inspection can be turned off for that particular server at the IP level?
Cisco Firewall :: ASA 5505 / Skinny Inspection Closes Connection
Dec 31, 2011I have a branch office set up were all traffic goes back to the core, iincluding internet acces.
It has been working fine for a year, but recently I have started to see the firewalls Asa 5505 closing the connection and stopping the phone from answering the calls.
I have skinny inspection turned on all my branch offices, but had to turn it off at the one site to get one of my phones to registered.
I haven't made any changes to the network that would trigger this issue, such as upgrading phone firmware.
My firewall is configured for default deny, other than Skinny (tcp 2000), do I need Skinny inspection to be turned on?
It's turned on my 5 other branches.How can I debug why the skinny inspection is closing the connection?As a separate note this phone is part of a pool of phones that shares a common DN, would this be causing the issue?
Cisco Firewall :: ASA 5520 - Inspection Of MSSQL Dynamic Port
Jun 5, 2012I need to allow traffic between webserver in dmz and mssql (Microsoft SQL Server 2008).MSSQL use dynamic port (now it is 63796) and this cannot be changed.
Basically, I can allow such traffic using next configuration:access-list dmz extended permit tcp host 1.2.3.4 host 5.6.7.8 eq 1433access-list dmz extended permit udp host 1.2.3.4 host 5.6.7.8 eq 1434 access-list dmz extended permit tcp host 1.2.3.4 host 5.6.7.8 eq 63796
But, I would like to add mssql inspection and I did the next:
class-map class_sqlnetmatch port tcp eq 1433policy-map global_policyclass inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp class class_sqlnet inspect sqlnet service-policy global_policy global
[Code] ..........
Cisco Firewall :: 5510 - CSC SSM Slows Down Internet Traffic
May 17, 2011We have Cisco ASA 5510 256RAM running 8.2.4 with CSC 6.3.1172.4, it slows down internet traffics drastically when we do speed test, we get something like this, It the computer is bypassing the CSC, it gets This was done when there's very low traffic on the LAN and CPU is low usage on the CSC. The CSC has been re-imaged also but still doesn't solve the problem.
View 6 Replies View RelatedCisco Routers :: RV042 Firewall Slows VPN Traffic
Sep 9, 2011Replaced an older RV042 that had damage from lightning. The new RV042 is V03 with firmware 4.0.0.7. This router supports 7 branch offices using site-to-site VPN to other RV042 routers. After connecting the new RV042 at the main office, three of the branch offices had very slow response over the VPN tunnel. I disabled the firewall on the new RV042 and the problem resolved. The three branches with the problem have Windows 7 systems and the other 4 have Windows XP. I confirmed that the Windows firewall was disabled on the Windows 7 systems.I did try leaving the firewall enabled and disabling SPI, but that didn't work. Have to have firewall disabled to resolve the problem. I would not expect the firewall on the main office RV042 to affect VPN tunnel traffic, but apparently it does. Do we need specific access rules to fix the issue. It works fine with firewall disbaled, but I'd be more comfortable with it enabled.
View 2 Replies View RelatedCisco Firewall :: ASA 2960 Slows Down Internet Connection
May 12, 2010I have a mysterious problem with my Internet connection. The Edge topology is in the attachment so are the most important "show" commands. We have a 50Mb/s symmetric Internet connection. When we use Internet through ASA the download speed does not exceed 3Mb/s whereas the upstream is at about 45Mb/s. When we connect our LAN directly to 2960 the downstream increases dramatically up to 47Mb/s whereas the upstream remains at about 45Mb/s. Duplex is manually set to 1000/full on all interfaces. All that I have noticed are dropped packets on outside interface (Gi0/0). The reason is unclear.
View 6 Replies View RelatedCisco Firewall :: 871 / 2811 / 1841 - ZBFW Default Inspection Specification
May 6, 2011I can't find any specific information on the implementation of packet inspection in a zone based policy firewall. In other words, is there a specification or even just a set of values that define the default inspection parameters for all protocols? With DPI I can manage 'some' of the inspection capabilities but I have some fairly rigorous and specific requirements to meet and I need to validate that the IOS ZBFW will meet those requirements. Specifically, I'm interested in HTTP, DNS, and ICMP but all other protocols would be useful as well.I'm working with basic routers; 871's, 2811's, 1841's, etc. The IOS in use in most cases is adventerprisek9-mz.151-3.T.
View 4 Replies View RelatedCisco Firewall :: ASA 5520 Default Inspection Engine Dropping Connections
May 25, 2011I currently have the default inspection engine configured in my firewall to inspect http traffic. I noticed that the ASA will drop packets when visting legitimate websites. I've tried googling for a workaround but have been unsucsselful. How can I exclude some websites or IP's from being affected by the inspection engine?
View 1 Replies View RelatedCisco Firewall :: ASA 5520 CSC Module Per Subnet / IP Group Inspection Profile
Sep 7, 2011verify if the ASA 5520 CSC module way of applying security policy (http, smtp, pop3, etc.) is per network/subnet or group of users? Based on my understanding through reading, web and email protection profile/config is global. It will be the same to every network user that is redirected via service-policy config on the ASA.
Scenario: I have two VLAN, guest and employee. Of course guest and employee have different web filter profile. Can i configure it such that guest web-filter profile is not just strict while employee's access is limited only to productive internet sites.
Cisco Firewall :: Trace-route Through ASA 8.2 Is Not Working When ICMP Error Inspection
Jun 6, 2011I have problem with icmp traceroute configuration. When I enabling icmp error inspection in global policy, my traceroute results through ASA 8.2.4 looks like this: My traceroute [v0.75]
icmp inspection and ttl decrement on ASA is enabled. Also I configured ACL on outside interface to permit ICMP completely.
Cisco Firewall :: ASA5512-X Outbound Email With ESMTP Inspection Disabled
Jan 14, 2013I have a client that is running an ASA5512-X. When I initially installed it, they were having issues sending out emails. I disabled ESMTP inspection and thought it resolved the issue. Recently, they upgraded to Exchange 2010 and are still having an issue with some emails getting hung up in the queue. If I watch the ASA when they try to telnet to the external mail servers that do not work, they get a SYN timeout.
I am not sure why this would happen since ESMTP is disabled. They are running 8.6(1) on the ASA.
Cisco Firewall :: ASA 5520 Removed Icmp Inspection From Default Policy-map
May 10, 2012i have removed the icmp inspection from my default policy-map in my ASA 5520,now i could not able to ping to 4.2.2.2 from my LAN even though i have configured an ICMP Access-list in my asa like ,but I can't ping 4.2.2.2 for testing the Internet connectivity,what shall i do to allow only my self as admin to ping outside?
-icmp permit host 192.168.60.60 echo
-icmp permit host 192.168.60.60 echo-reply
Cisco Firewall :: ASA5510 ESMTP Inspection Stopping Outbound Mail
Jun 13, 2011I am having an issue with an ASA 5510, running 8.4(1) code, causing outbound mail to remain in the SMTP server queue (Exchange 2007). This only happens with some remote mail servers. The connection usually ends with the remote server eventually sending a TCP reset.
I've taken multiple inside and outside packet traces.Other trace's contain either X's preceding various sections of the stream content or all X's in the content. The X's only appear when inspection is enabled.
Disabling inspection is the only thing that seems to allow mail to flow. I find this curious because I'm running this same ESMTP policy on other ASA's. However, they are on 8.3 code.
Most everything I find when searching on this subject says to disable ESMTP inspection. [code]
Wireless :: Firewall Slows Download (Music Or Movies)?
Apr 19, 2011My firewall slows down my download, when I'm trying to download music or movies!
View 1 Replies View RelatedCisco Firewall :: IP Phone 7961 - Inspection Rule Activated And Call Works
Jun 23, 2011I got a problem yesterday with a customer that says that the calls from a CISCO IP Phone 7961 to an Alcatel 4018 IP Touch didn't work, well the phone rings but there's no voice; I manage a CISCO ASA version 8.2(1) and I was checking the Inspection Rules in the Service Policy Rules section and when you open the inspection_default at the Rule Actions tab I find that the H.323 H.225 and H.323 RAS box wasn't checked so I ask to the customer to made a test and the same problem happen so I checked both box and again ask to the customer for a test and it works.
I was talking to a partner and he said that maybe this Inspect fix some signaling parameters of this protocol that can't work fine behind of a firewall.
Cisco Firewall :: Disconnected Downloads Through ASA5510
Nov 11, 2012Running into a bit of a problem. Anytime I try to download a large file through our 5510 the download fails at different points. Cannot download via a download manger at all. I see nothing in the logs which are set to infomational.
I can connect my laptop to our internet connection outside the firewall and HTTP and download manager downloads connect and finish just fine. I go through and scrub my config for posting?