I'm trying to configure an ASA 5505 to view my Slingbox from my iPhone/iPad from an outside or 3G network. I can't ping my internal networks while connected via AnyConnect. I know that I need to free up port 5001, but I can't seem to get it to work.
View 0 RepliesI'm looking to setup AnyConnect VPN with no split tunneling. ASA 5505 v8.2. It seems this should be really easy. I must be missing something.
I can get the AnyConnect users to connect fine and they can access sites internal and at other IPSec-tunneled sites. But no access to the internet.
Internal is 10.1.1.x, VPN pool is 10.1.1.251-253 (Temp list for testing). I issued the following tracer: packet-tracer input outside tcp 10.1.1.253 12345 69.147.125.65 80 detailed
The last reported point (where it fails) is:
Phase: 7
Type: WEBVPN-SVC
Subtype: in
[Code].....
I am interested to configure my slingbox with my ASA5505. I am currently able to use the device remotely when I connect via VPN. My concern is that the VPN uses too much bandwith and I would get better quality if I would able to forward the appropirate ports through the ASA5505 and connect directly from the outside.
View 1 Replies View RelatedI have an ASA 5505 that has had a working configuration with several AnyConnect clients using dual authentication for weeks now. My normal process for adding new users has been to configure the user in both authentication databases and the onboard certificate authority, have the user connect to the outside IP of our firewall with IE, download the P12 cert after entering their OTP and then connecting once the cert's imported to download AnyConnect.
I had to add a new user a couple days ago and curiously IE (8) on their computer could not connect to the outside interface of our firewall, as if the laptop had no internet connectivity. I could telnet to port 443 from a command-line, and could even hit it with Firefox (which I ended up doing to download the P12 cert...). I can hit other SSL-enabled and standard websites from IE as well as Firefox. In addition, because AnyConnect seems to rely on the same mechanism to connect as IE does, AnyConnect can't connect either.
I then tested using a previously working laptop fully configured with AnyConnect and a certificate and now it can't connect. There are other previously working laptops that still work, which only makes the issue more clouded.
In watching the logs on the firewall, when one of these non-working computers attempts to connect they hit the firewall, a connection is opened and the SSL handshake is started, but it's never finished and the connection is torn down. Working computers complete the handshake as expected and a tunnel is opened.
I've checked IE forums for this issue and none of the fixes found therein seem to apply or work. Since this issue seems to only affect IE and AnyConnect's ability to connect to my firewall I have to assume the issue is there.
ASA Version 9.1(1)
!
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
[Code]....
I setup and SSL anyconnect VPN on my Cisco ASA 5505. It works well and connects with out a problem. However, I can't ping any internal clients, but I can RDP to them. Most of the time people end up posting their config so I will as well.
MafSecASA# show run
: Saved
:
ASA Version 8.2(1)
[Code].....
I have been asked to set up remote access VPN on an ASA 5505 that I previously had no invlovement with. I have set it up the VPN using the wizard, they way I normally do, but the clients have no access to anything in the inside subnet, not even the inside interface IP address of the ASA. Thay can ping each other. The remote access policy below that I am working on is labeled VPNPHONE, address pool 172.16.20.1-10. I do not need split tunneling to be enabled. The active WAN interface is the one labeled outside_cable. [code]
View 1 Replies View RelatedWe have 30 remote workers which we have recently acquired which are being set up with the AnyConnect client to connect to our head end ASA 5510. For security purposes, we have to allow them access to only 3 of our local internal servers, all on our 10.10.X.X/16 subnet. The remotes are being issued a 10.10.50.X/24 address via DHCP on the ASA when connecting. I thought this would be as simple as creating an access list but have not had any luck doing so. In addition, we need to allow them full access to servers in a datacenter connected to our same head end ASA via a site-to-site VPN while they are connected to us using AnyConnect.
View 1 Replies View RelatedWe have 30 remote workers which we have recently acquired which are being set up with the AnyConnect client to connect to our head end ASA 5510. For security purposes, we have to allow them access to only 3 of our local internal servers, all on our 10.10.X.X/16 subnet. The remotes are being issued a 10.10.50.X/24 address via DHCP on the ASA when connecting. I thought this would be as simple as creating an access list but have not had any luck doing so. In addition, we need to allow them full access to servers in a datacenter connected to our same head end ASA via a site-to-site VPN while they are connected to us using AnyConnect.
View 4 Replies View RelatedI setup ASA5540 for SSL-VPN (clientless) works fine. But I try to use Client (AnyConnect) to access internal resources, it is failed. It is stiil initiate sessions from remote client IP. I need to initiate session from client IP assigned by ASA5540 box (same with Cisco VPN client connect to Cat65 SVC module). How I setup it?
View 3 Replies View RelatedWe were having a discussion of ios firewall vs. asa for smaller clients(less than 50). On using ios firewall(zbf or cbac)and an asa 5505/5510. One of the arguments brought up on using ios firewall on the router is that a router will do an ip sla failover. I have configured a number of isr's for this and i know it works good.
View 1 Replies View RelatedI'm having problems getting AnyConnect clients to reach a server (192.168.139.3) on the Inside interface of my ASA 5505. Ideally, this would be accessible from the DfltAccessPolicy or another dedicated policy, but right now I'm happy with any access. Everything else seems to be working as expected. I've rebuilt this config a number of times without success. I can ping the IP from the ASA itself.
View 2 Replies View RelatedI'm trying to connect two ASA 5505s for a IPSec L2L VPN. They can connect, but not pass traffic from the AnyConnect subnet. I've added the config from ASA-2, with the LAN subnet of 192.168.138.0 and a subnet of 192.168.238.0 for AnyConnect client.
I'm trying to get the AnyConnect Clients access to the 192.168.137.0 LAN behind ASA-1 at 1.1.1.1. Having both 192.168.238.0 and 192.168.138.0 both access 192.168.137.0 is acceptable.
There's probably a lot of cruft in this config, as I've been reading all over forums and docs without much success.
:
ASA Version 8.2(1)
!
hostname asa-wal
names
name 192.168.238.0 anyconnect-vpn
!
interface Vlan1
nameif inside
[code]....
I just configured a ASA for Remote VPN. I think that every works fine but I have no access to the Clients into the Local LAN behind the ASA.
PC <==internet==>outside ASA inside<=LAN=> PC
After AnyConnect has establised the connection I can ping the inside Interface from the ASA but I can`t Ping the PC behind the inside Interface.
Here is the config of the ASA5505:
: Saved
:
ASA Version 8.2(1)
!
hostname asa5505
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
What anyconnect version do I need on a 5505 so i can have people connect via iOS devices? Right now I have "anyconnect-macosx-i386-2.5.1025-k9.pkg" on there, will that work for iOS devices?
View 7 Replies View RelatedI have a ASA5505 with the Sec Plus license on it. This allows 25 VPN peers at any time according to the show version output:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 20, DMZ Unrestricted
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 25
WebVPN Peers : 2
Dual ISPs : Enabled
VLAN Trunk Ports : 8
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2
This platform has an ASA 5505 Security Plus license.
1.)As far as I understand this means RA users and peer2peer combined?
2.)I need additional RA clients to be able to connect in at any time, as far as I know there is no way to allow more IPSEC clients then this due to hardware limitations?
3.)If I go for the Anyconnect option (10 users license), does this then mean that I can use the 25 IPSEC VPNs and at the same time have users using the 10 SSL Anyconnect VPNs at the same time?
4.)Which Anyconnect license am I supposed to buy if this is the route I go, the clients will all be connecting from their desktops most of the time?
5.)Is it difficult to set up?
A customer has a 5505. According to the datasheet the limit of IPSEC sessions is 25 and the limit of anyconnect sessions is 25. Does that mean I can have 25 IPSEC tunnels and 25 Anyconnect tunnels at the same time? The customer needs at least 50 concurrent tunnels on his ASA. Am I understanding it correctly?
I was thinking the customer could pay for the anyconnect essentials license and connect his anyconnect clients to the ASA. Is that a good option to get the 50 concurrent clients connected?
Any connect vpn client no internet access.
Below is configuration.
ASA Version 8.2(1)
hostname ciscoasa5505
Interface Vlan1
nameif inside
security-level 100
ip address 172.16.0.1 255.255.0.0
[code]...
Our current cable ISP is having issues providing us with consistant connectivity. I would like to bring in a second ISP to allow my users to choose where they will connect to. There will be two dns names and i just want to to be able to choose between them.
Is this possible on the ASA5505? supporting two ISPs at one time for VPN on both?
I have a base 5505 and would like to get AnyConnect working. To do that, would I have to first purchase either an essentials or premium license and then purchase the AnyConnect Mobile license?
View 1 Replies View RelatedI've configured a 5505 but internal clients can't ping external ip. To test I've connect a pc with the ip of the default router on the Outside int the ASA can ping the PC and the PC can ping the ASA, but internal clients can't ping the PC
PC config 195.12.23.241/28
Here's the ASA config, so far I've wiped the ASA and started with a blank sonfig and built it up but still not working.
ASA Version 8.2(5)
!
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
[Code] .....
We have configured a Cisco ASA 5505 with AnyConnect access. This works great. However, these users cannot seem to ping devices on the private network. We have configured all devices on the network with a 10.10.10.0/24 address space. The inside interface of the ASA i 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.They users can utilize SSH and Oracle or MySQL calls but cannot seem to ping. Obviously, I am over looking something.
View 2 Replies View RelatedSo here's what I think I should do to give email access only to a segment of addresses of my inside network.
1) Create a network object for 62 machines that will represent my dhcp clients.I plan to use 192.168.0.65-192.168.0.126. So I will use address 192.168.0.64 with netmask 255.255.255.192. Then set DHCP server to service this address range.
2) Create an ACL which will Permit Any to use tcp port 110 (pop3) to get to the outside. Which leads me to question #1:
How do I permit the source "Any" to communicate with "Any Less Secure Networks" like the implicit rule that gets zapped once I create new ACL? Is "Any Less Secure Network" implied by the "Any" destination?
3) Create an ACL which will Deny my DHCP range to talk to the outside.
4) Create an ACL which will Permit Any to talk to Any Less Secure Network(essentially recreating the implicit Permit ACL that got zapped).
I'm having trouble setting up local LAN (reach inside network when VPN connected) and Internet access (reach internet when VPN connected) for my VPN CLients when they are connected to my VPN, They can connect, no problem there, but I can't reach any resources when connected. My pings time out, both to my inside network and to public ip adresses, the only thing I'm able to ping is my ASA (172.16.30.1), and I don't se any routes under "Status/Statistics/Route Details" in my cisco VPN Client (when connected).
Here's my config
ASA Version 8.0(3) !hostname KardesASAdomain-name default.domain.invalidenable password XXXX encryptednames!interface Vlan1 nameif inside security-level 100 ip address 172.16.30.1 255.255.255.0 !interface Vlan10
[Code]....
We have an ASA configured to access the internet, which works fine for clients who have an IP address assigned by DHCP, but not for clients with manually assigned IPs.
For instance, with the DHCP server configured to give IP addresses between 172.16.101.1 and 172.16.101.10, a device may get the IP address 172.16.101.1. This machine will have connectivity to the internet.
If we then configure DHCPd server range as 172.16.101.2 to 172.16.101.10 and statically assign the 172.16.101.1 IP to the client, it will not have internet access. It will, however have inside access and VPN access.
If I try to ping 8.8.8.8, the following is logged:
ASA 3 Feb 08 2013 15:51:01 8.8.8.8 xxx.xxx.xxx.100 Deny inbound icmp src outside:8.8.8.8 dst servers:xxx.xxx.xxx.100 (type 0, code 0)
Where 'servers' is the name of the inside interface the request is made from and 'xxx.xxx.xxx.100' is the external IP. It seems as DNAT is not working when the client IP is static assigned.
Just installed ASA -5505 replaced cisco 851
My exchange server hosts remote outlook clients and remote web access
no one on the remote side can access my exchange server
internal mail flows in bound and out bound.
My iphone can not access the exchange server either.
When the Cisco 851 was online all the above worked great. Nothing changed on the remote client side just put the ASA 5505 in service.
I am new to the ASSA 5505 family. Had a reseller configure the router but unable to get them at this hour. Called Cisco support but they are closed at this time also.
I'm trying to get a couple clients to talk to my Active Directory servers. I've created sub-interfaces on my ASA. So, my clients are on Gi0/1.139 and my two Active Directory servers are on Gi0/1.132. I've enabled traffic on TCP 53-5000 port range according to Microsoft. My clients still can't join the domain. What ports I need to open up? My AD servers are Windows 2003.
View 1 Replies View RelatedMy ASA 5505 has stopped giving out DHCP address to my machines.Everything was working fine and nothing has changed in the network. I've reloaded the firewall and clear all DHCP on the firewall I've even re-entered the cmd on the ASA.
I'm able to staticlly assigned address to the clients and all is way. When I do a DHCP debug on the ASA I don't see any events relating to the DHCP service apart from checking for lease expiry.
I've also tried to plug a machine straight into the ASA and no result. I finally did a packet capture and I am seeing the client machine sending out a DHCP discover packet and nothing else is responding.
My ASA config is:
dhcpd address 192.168.3.10-192.168.3.33 inside
dhcpd dns 8.8.4.4 interface inside
dhcpd option 3 ip 192.168.3.1 interface inside
dhcpd enable inside
I have a couple of ASA 5505's which work fine for what they are doing VPN and all that - we have 1 DLINK DFR-700 Firewall left and I need to get a new ASA to replace this since it is old.
All this box really does is port forward external clients to 1 address on the internal lan for client software updates. Any example configs?
So lets say we have client a with IP 1.1.1.1 and client b has 2.2.2.2 - at the moment this is what happens client a and b come in through http and get mapped to the internal http server 10.10.1.2
So I need to setup about 100 clients which can come in through http only - get mapped to the internal IP and also keeping the internal server to be able to access anything outside.
I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
Result of the command: "show running-config"
: Saved
:
ASA Version 7.2(4)
!
hostname ASA
domain-name default.domain.invalid
[code].....
what I need to add to get the vpn client to be able to ping the router and clients?
Can anyconnect clients and cisco vpn ikev1-2 clients use the same certificate on an ASA 5510 ?
View 4 Replies View RelatedI have setup an AnyConnect Connection Profile on my ASA 5520.
We have some remote support software which the helpdesk use to connect to PC's remotley and torubleshoot.
I cannot connect to this software using the assigned IP address of the client even though it works fine with our old Nortel VPN.
If I hit the IP address the packet gets all the way to the ASA and seems to disappear.
I have setup an IP v4 access list on the connection profile which allows any/any access b ut still no joy.
After connecting via anyconnect client 2.5, I cannot access my internal network or internet. My Host is getting ip address of 10.2.2.1/24 & gw:10.2.2.2
Following is the config
ASA Version 8.2(5)
!
names
name 172.16.1.200 EOCVLAN198 description EOC VLAN 198
dns-guard
!
interface Ethernet0/0
description to EOCATT7200-G0/2
switchport access vlan 2
[code]....