Cisco Firewall :: ASA 9.x Code Supports Change Of Authorization
May 29, 2013Does ASA 9.x code supports Change of Authorization (CoA). I have looked through the release notes and can't find anything.
View 1 Replies
ADVERTISEMENT
Cisco AAA/Identity/Nac :: ISE 1.1.2 Change Of Authorization With Avaya Switches (5520)?
Jan 27, 2013I am configuring ise to do the posture assessment. I am having avaya as my LAN and Core switches. The idea is once the user is authenticated using 802.1x then it will be moved to qurantine vlan and after it is compliant with the company's policy then it will be moved to the actual vlan. I have configured the avaya switch to accept the radius assigned vlan and also configured the 802.1x dynamic-authorization. Currently, radius assigned qurantine vlan is working but once the nac agent scan and mark the PC status as Compliant then the CoA is not happening and User is not moved to the actual vlan.
I tested the same ise authorization policy of dynamically assigning VLANs on cisco switches and it worked perfectly, but the same is not happening on avaya switch.
Change Wifi Security Code?
Aug 14, 2011instructions about how to change wifi security code
View 1 Replies View RelatedCisco Wireless :: Change Country Code For AIR-AP1252AG-E-K9
Jul 23, 2012We have an AP located on a German site which is supposed to connect to a WLC which is in Germany as well. Our network however is spread to France as well where another WLC is located. Now, the AP can not be convinced to connect to the German WLC. Despite our efforts (e.g. manuel IP configuration, reset to factory defaults) we don't manage to bring that AP to the German network - this is by the way the only AP, all other approx. 200 work just fine.
View 6 Replies View RelatedCisco VPN :: Change Country Code On 1941 Router
May 3, 2011I am trying to install SSL VPN on our 1941 router. When i try to send a CSR for signing the site complains about the country code not being correct. How can i change the contry code in Cisco IOS Version 15.0(1r)M9 ?
It is also complaining about the domainname, but the thing right now is the contry code.
Change Security Code On Internet On Desktop?
Jun 18, 2012I want to ask how to change security code on my desktop.
View 2 Replies View RelatedHow To Change Security Code For Internet On Desktop
Jun 18, 2012I want to ask how to change security code on my desktop.
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N - Change A Security Code?
Oct 17, 2012I have a WRT160N that I've been using with my HDTV for months. Now I want to connect a BluRay player to it, but the setup requires me to enter a security code, and the one I had for the router doesn't work. Can I change the number, or at least double-check the number I do have?
View 4 Replies View RelatedCisco Firewall :: Command Authorization In ASA 8.4 For Object Network
Apr 28, 2012I just tried to do a quick privilege level setup for a user to limit access to asa. User should be able to add nat's to configuration.ASA 8.4 is in question and trying the following does not seem to work:
privilege configure level 3 command object,gives me ,ERROR: specified command 'object' not found in any mode.It looks like localy this cannot be done or I am doing something wrong?
Cisco Firewall :: ASA 5505 Supports 10k Connections
Oct 21, 2012When we say that ASA 5505 supports 10k connections does it mean that we can have 10k connections to the different websites?
View 5 Replies View RelatedCisco Firewall :: Max Number Of Policies That ASA 5525X Supports?
Jan 5, 2013What is the max number of policies can ASA 5525X supports ? I dont find it in the datasheet.
View 5 Replies View RelatedCisco Firewall :: 5580 - ASA Supports NAT In Bridge Mode?
Oct 31, 2011Does ASA supports NAT in bridge mode? especially the 5580 series x??
View 1 Replies View RelatedCisco Firewall :: Recommended Stable Code For 5585x Firewall?
Mar 20, 2013Looking for a recommended code on the ASA 5585x firewall. We ran into a bug (CSCtr24705) on version 8.4.2 where it rebooted the primary firewall. The bug has to do with modifying an existing ACL that's part of a custom policy-map inside a service-policy. If we upgrade to 8.4.5 (which has the previous bug fix in it), there is another major bug (CSCud70273) where if you use the packet-tracer input command on an inside interface it causes problems too.
I don't understand why packet-tracer input would have a bug associated with it when it's been around for a long time and we use it on a daily basis for troubleshooting. Is there stable code for the 5585x to upgrade to without running into possibly a major bug? This is our core firewall so there are no VPN tunnels on it. It's setup in active/standby failover in routed mode.
Cisco Firewall :: How Many IPSec Tunnels An ASA 5500 Series Supports
Aug 4, 2012I tried looking in ASA documentations but unable to find out that how many IPSec Tunnels can be terminated to an ASA cluster. I have 5545 running only two IPSec Tunnels so far but need to terminate 18 sites all up and would like to confirm how many tunnels we could terminate? Is there a limitaion to it?
View 2 Replies View RelatedCisco Wireless :: Maximum Code Level For Lightweight 1130 / Minimum WLC Code For 1600 Series APs?
Feb 19, 2013I have been searching through the cisco docs for a while and i just cant seem to find this info. Can I run aironet 1600's with my wism running 7.0.116? Also, could I run my 1130 series ap's with a wism2? Basically, what is the minimum code level for a lightweight 1600, and what is the maximum code level for a lightweight 1130?
View 3 Replies View RelatedCisco Firewall :: How To Get Part Code On ASA5520
Jul 22, 2012What is the difference /how to show part number,part code and serial number on cisco ASA 5520 series.succeed to get serial number by command show activation-key detail..how to get part code /part number?
View 2 Replies View RelatedCisco Firewall :: ASA 5540 - Code Versions / 8.4 Or 9.x
Feb 28, 2013I am in the process of rebuilding our ASA 5540 pair. We are currently on 8.2 code with this set of firewalls and I was going to upgrade it to 8.4 being I have a couple of other firewalls running this code currently and am familiar with it. That said, I saw that the 9.x code is out there now. Are there any major advantages or caveats with the 9.0 code? I plan to use this firewall with SSL VPN and RSA Secure ID integration for the next 2-3 years at least. Any quick pointers on these two code versions and on upgrading to 9 or staying with 8.4 line.
View 2 Replies View RelatedCisco Firewall :: 5510 Running Code 7.2 With Ssl Users
Mar 21, 2012I Have an asa 5510 running code 7.2 configured with ssl vpn,ssl vpn users able to connect to to portal which i have configured with the required resources,but the thing is that these ssl users unable to upload files to cifs shared directory , although they have full access to the shared folder
View 0 Replies View RelatedCisco Firewall :: ASA 5520 Refuses To Load 8.x Code?
Oct 17, 2011I have a ASA# here that refuses to load 8.x# code. I do not have an issue loading 7.x# code at all. When I power on the ASA# it does not pass the fsck#.
Loading /asa842-k8.bin#... Booting...Platform ASA5520# Loading...IO memory blocks requested from bigphys# 32bit#: 20848dosfsck# 2.11, 12 Mar 2005, FAT32#, LFN#
I have tried 8.0, 8.2, 8.3, 8.4 codes. I have also swapped RAM and flash.
Cisco Firewall :: Recommended Code For ASA5580 / ACE And FWSM?
Mar 24, 2011We are in the process of building a new DC and would like to know which is the recommended version of code to run on the following:
Firewall Services Module
Cisco ASA5580, 5550, 5520
ACE module
Cisco Firewall :: Multiple Static NATs With ASA 8.4.X Code
Mar 12, 2012We have a need for an inside address to have more than one static NAT outside addresses. I know this wasn't possible before 8.3.X code. I still can't quite get it to work with 8.4.X code yet.
Here is what I had with 8.2 code.
static (inside,outside) 10.21.197.0 10.17.197.0 netmask 255.255.255.0
our inside network is 10.17.197.X/24. the current NAT we have in place is 10.21.197.X/24.
we need to add an additional NAT of 10.22.197.X/24 and I also have networks that will need to hit the address with no NAT.
I do know the source networks where I need each of the three cases:
from 172.20.X.X I need to hit the inside of 10.17.197.X natively, no NAT.
from 192.168.X.X i need to hit the inside of 10.17.197.X with 10.21.197.X NAT
from 10.10.X.X I need to hit the inside of 10.17.197.X with 10.22.197.X NAT
Cisco Firewall :: 5510 Code Version Upgrade?
Feb 3, 2013I am looking to upgrade a 5510 that is currently on code version 8.0(4) to code version 9.1. I know I will have to upgrade to 1gb ram, but can i just upgrade straight to version 9.1 or do I need to follow an upgrade path? This is a standalone device so I am planning on downtime.
View 8 Replies View RelatedCan't Turn On Firewall - Error Code 0x80070424
Feb 11, 2012For some reason whenever I try to turn on my firewall I get the following error message:
Windows firewall can't change some of your settings Error Code 0x80070424
Cisco Firewall :: Create Etherchannel With Sub-interfaces On Asa 5520 Running 8.4.1 Code?
Jun 22, 2011I am trying to figure out how to create an etherchannel with sub-interfaces on an asa 5520 running 8.4.1 code. It doesn't seem to allow me to configure any type of sub interface on the port-channel or anywhere else once I create it.
View 4 Replies View RelatedCisco Firewall :: ASA 5540 - Version Change In Firewall?
Mar 15, 2012How are asa5540 in high availability mode upgraded for their versions.
View 1 Replies View RelatedCisco Firewall :: 877w SDM And CLI ACL Change
Dec 20, 2011I have a working easyvpn setup. We need to change the HQ ip address (current it is i.e 85.146.110.101). This is ACL is applied to Fastethenet conecting to ISP:
interface FastEthernet4
description $FW_OUTSIDE$$ETH-WAN$
ip address dhcp
ip access-group 101 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto ipsec client ezvpn Acom
As soon as I apply again the ACL to interface Fastethernet 4, access to internet is lost. If I put original ACL 101 (with ip address 85.146.110.101) it works fine.
So I am wodering what wrong with may ACL? Should I make the change via SDM not CLI (to be honest I did not know/use SDM before today)?
Cisco Firewall :: Change Order Of Nat Rules (v8.4)?
Sep 26, 2011I have a question about the new nat implementation in an ASA 8.4. when I perform a "show nat" I get the following result:
1 (outside) to (inside) source dynamic any NAT-SSL-VPN_172.30.100.250 destination static 00B_172.30.100.0_24 00B_172.30.100.0_24
translate_hits = 26, untranslate_hits = 0
2 (inside) to (outside) source static LAN-HOST_172.30.100.11_LNX01 WAN-HOST_84.199.44.2_32_LNX01 service TCP-80-HTTP TCP-80-HTTP
translate_hits = 0, untranslate_hits = 0
Is it possible to change the order of the nat rules without removing and reapplying the rule on position 1 ? (both rules have to stay in section 1)
Cisco VPN :: WRVS4400N To Change ISP And Making Changes In Firewall
May 12, 2011We have a customer that recently changed IT Vedors and came to us. We needed to change the ISP and need to make changes in their Firewall. I went out on site and wasn't able to get into the Routers and I contacted the previos company but they wouldn't release that information. So we had to reset the devices and set everything back up. Everything works great except before they had an IPSEC VPN Tunnel between the 2 buildings. Both Buildings have WRVS4400N Routers and I have setup a VPN IPSEC Tunnel on both sides. I have named them the same and the summary says that both are up. But when I try to go from one side to the other I am unable to Ping or resolve anything. I called Cisco but they said they are out of warranty. Cisco directed me here.
View 1 Replies View RelatedCisco Firewall :: 9.11 / Can't Change The Password For SSH Login
Dec 17, 2012I am running 9.11 and I have created users with password but it has no effect on the SSH Login!I don't get it... What am I missing?
View 3 Replies View RelatedCisco Firewall :: 5510 - Cannot Ssh After Mask Change
Aug 7, 2011I needed to change the mask, not the ip address, of the outside interface of an 5510 running 8.2(3).
Immediately afterwards I could establish ASDM but could not re-establish SSH.
I tried the following:
Zeroize the rsa key and generate a new one Create a new SecureCRT session to accept the new key
That didn't work. All I have is ASDM access.
Cisco Firewall :: PIX515E Change IP Address
Feb 12, 2012I just added a PIX515E to my lab (since this is a lab, if I need to change IP address, that is not a problem)....I thought I configured it right, but I am not able to ping any of my other routers/PCs.I have EIGRP on the other three routers, but not sure if I configured it right on the PIX.The diagram below shows my current network topology....(right now the PIX is connected vai Ethernet 1 to the switch, not the router itself) [code]
View 13 Replies View RelatedCisco Firewall :: 5520 Change Of Subnets
May 19, 2013i have a asa 5520 that is working with three zones DMZ, inside and outside.
my DMZ is for all my branches and it had a /24 subnet my inside had a /24 subnet and all was fine i could talk to branches and they could talk to me. i also had all the branchess accessing internet via the ASA which is at HO. i changed the subnets from /24 to /21 and broke everything
below is the configs for the asa
!
interface GigabitEthernet0/0
nameif outside
[Code].....
Cisco Firewall :: ASA 5520 - ISP Change Procedure
Oct 30, 2011our company is going to change its´ ISP. The External Isp are going to obviously change too. We have an Active/Standby Firewall and we would like to make the change with at least connectivity downfall as possible. In our configuration we have nearly all features configured as in a normal Productive Firwall such as , NAT, Site-to Site VPN, Remote Access Webvpn, ACLs and also routing. I have looked up some information in this community and still I am not sure about the steps to be made so to reach our goal.
I have read that changing only the "names" from the old IP Range to the new Ip range would not really make the change. The old Ip range will still be configured in the features using the external Ip address. Therefore we have to first delete all the information (in the running config) connected to these Variables and then re insert them. My biggest worry is that this could be a little bit tricky during the implementation, if some config lines or objects could be left out during the deleting and inserting procedure.
How we could make this change with a low percentage of "copy and paste failures"? I was thinking about in changing the "names" to their new Ips and then afterwards reload the ASA. Will this workout? Primary ASA will be changed first with the secondary shutdown. ASA Firmware 8.2.2 (12).