Cisco Firewall :: How To Configure NAT Port Range On ASA 5510
May 22, 2012i have a cisco asa 5510 and would like to add a NAT rule for a range of ports like 50000-59999
View 15 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5510 - Time Range / Allow Single Port During Business Hours Only
Apr 1, 2012I'm new to an ASA 5510 running 8.4(3) and am trying to figure out something regarding time ranges in ASDM. I simply want to allow a single port during business hours only (I'm not concerned about open sessions needing to be closed). So as an example I add a rule something like:
(RULE1 on the internal interface) SRC=INTERNAL DEST=ANY SERVICE=RDP ACTION=PERMIT with a time range set for weekdays 8:00-16:59. I did a test after 5pm on a weekday and was still allowed to do RDP to a server (from INTERNAL), and after using the packet trace tool saw it was still passing through due to a rule a couple lines down (rule 4) that allowed a port range that happened to include port 3389. So my question is if I specify an "allowed" time range and someone attempts access outside that time range, why doesn't it drop it right there? I guess I'm assuming that anything outside the "allowed" time range would be dropped but that doesn't seem to be the case. I'm also assuming the rule base is processed top to bottom.
Cisco Firewall :: 5510 Block Country Range Of IP
Jan 4, 2012I have a ASA 5510 device. I have been asked to block Ip range for India from accessing set of servers. Total Subnets: 34,675,968.I really don't want to create a two mile long access list with all these subnets.
View 2 Replies View RelatedCisco Firewall :: ASA 5510 - Add A NAT Rule For Range Of Ports?
May 22, 2012i have a cisco asa 5510 and would like to add a NAT rule for a range of ports like 50000-59999
View 1 Replies View RelatedCisco Firewall :: ASA 8.4 Forwarding Port Range?
Oct 30, 2012I need to open port range 554 - 558 to a DVR on the internal network. Also, I need to NAT one of my public IP's to the DVR. How is this accomplished in 8.4? I was able to do it in an older version ASA software.
View 3 Replies View RelatedCisco :: Configure SNMP Traps For Port 80 On ASA 5510?
Jan 30, 2012Is there a way to send an SNMP trap form the ASA when port 80 is trying to be accessed??
We use the ASA5510 and also use ScanSafe Web Security. Web Security is great but we find ourselves worrying if user has edited their Browser connection settings to remove the proxy settings that we push down using Group Policy. We also cut off the users ability to make changes to those settings but it interferes when I need to troubleshoot a special program that cant use a proxy server. It just makes it harder for me. The other thing is that Group Policy only works for IE. Google Chrome will inherit the system settings in IE. So we have Safari and Firefox as well as a lot of others to worry about not getting the configuration. There is also debate about limitting the use of anything but IE and FireFox.
Without laying down the law and getting all sorts of hate mail and death threats I would like to run ScanSafe in such a way as to make sure each user receives the Group Policy settings and that is all.
I would now like to just set up an SNMP trap on the ASA for ANY traffic that is trying to get to port 80. Either get in in my syslog server or have the asa email me directly. Scansafe sends the Internet traffic out on 8080 to the Proxy towers.
I could block port 80 outbound but again, I limit my ability to troubleshoot on the fly. I would have to break this every time I need to troubleshoot.
Cisco Firewall :: Port Forwarding A Range Of Ports (PIX 6.3)
Dec 5, 2012I have a network with multiple servers behind a PIX with 6.3 on it. I have one public IP address, and I'm using NAT. I'm currently trying to port my Exchange server to a cloud host, and the vendor is requiring I open up a wide range of ports for MAPI, basically ports 1024 on. What would be the command to forward all of the trafic cominto/from that broad range? if I could simply route all trafic to and from their two IP addresses to my email server, that would accomplish the same end goal.
View 3 Replies View RelatedCisco Firewall :: Opening Port Range ASA5505
Mar 26, 2013I just bought a Cisco ASA5505. I'm trying to opening a port range through CLI, but it doesn't seem to be working.
Background:I have an FTP Server running behind the firewall and need to allow port ranges 30000-30100 for data connections. I have been using FTP through the command prompt and its working. However, I cannot use it through the FileZilla client as it fails to query the directories. I have the ASA forwarding to port 1125 from 21 in passive mode.
Access-List:
access-list Outside_Access_In line 3 extended permit tcp any any eq ftp-data (hitcnt=0) 0xfa8ed43d
access-list Outside_Access_In line 4 extended permit tcp any any eq ftp (hitcnt=17)
[Code].....
Cisco Firewall :: 5505 - NAT Port Range For Sip Server
Feb 7, 2013: Saved
: Written by enable_15 at 03:51:29.049 UTC Mon Feb 4 2013
ASA Version 8.4(4)1
host name cisco asa
enable password xxxxx encrypted
password xxxxx encrypted
names
interface Ethernet0/0
switch port access v lan 100
interface Ethernet0/1
interface Ethernet0/2
[code]...
Cisco Firewall :: Port Range Forwarding On Post 8.3 ASA5505
Jun 1, 2011I have an ASA 5505 on a job. It is a smaller business that would have done better with an RV082, but they have what they have. It is running firmware 8.4. The client needed ports forwarded for their FTP server. The port range in this config is tcp 43333-43339. The FTP server ip is 192.168.1.2. [Code] ......
View 8 Replies View RelatedCisco Firewall :: 1811 NAT Port Range From Loop Back
Feb 19, 2013I need to NAT a port range spanning from TCP and UDP 50,000 to 59,999 from inside global address 58.96.x.x on loopback2 to an inside local address of 192.168.5.5.Currently all the existing NAT translations are 1-to-1 that map inside global addresses on a wide span of Loopbacks and a Dialer Interface to inside local addresses on few subnets which are fine.I'm using an 1811 with an ADVIPSERVICESK9-M image, version 12.4(6)TS
View 1 Replies View RelatedCisco Firewall :: 3845 - Open Port Range On Secondary IPs On Router Interface
Feb 12, 2013 I have 4 public IPs on Router 3845 interface FastEthernet 0/0/1. IP as below.
50.200.2.2
50.200.2.3 secondary
50.200.2.4 secondary
50.200.2.5 secondary
I wan to allow ports 80 to 90 on 50.200.2.3 for my webserver (192.168.10.50)
Cisco Firewall :: How To Configure Firewall Access For ASA 5510
Nov 4, 2012This is my first time to use the Cisco ASA 5500 family. I have a request from a user to create an access rule, to allow all LAN traffic to Destination IP address 165.241.29.17, 165.241.31.254 with Destination TCP port 5060,5061,5070 and UDP port 50000-52399.
View 9 Replies View RelatedCisco Firewall :: How To Configure ASA 5510
Sep 11, 2011I'm having a problem configuring an ASA 5510. A previous employee started the config and left abruptly. He established a VPN Tunnel between two of our sites and that's working without an issue. The problem is, the network behind the 5510 at the remote location cannot access the internet.
ASA Version 8.2(1)
!
hostname PH-Firewall
domain-name pleasehelpme.com
enable password HXrQty4kqW8s8yeE encrypted
passwd ucA.qrYJWD9UyIFz encrypted
names
[code]....
Cisco Firewall :: Configure DMZ On ASA 5510
Mar 3, 2013I am confiuging a DMZ on my ASA 5510 but I have run out of physical ports, since I have dual Wan ports configured. I plan to implement a DMZ using subinterfaces. I have 2 questions:
1) Do I need to configure a Vlan to complete this task?
2) Do I need to re-configure the other interfaces for subinterfaces and/or vlans as well?
Cisco Firewall :: How To Configure ASA 5510 8.2(1)
Jul 25, 2011I'm trying to configure an asa 5510 8.2(1)?I have a range of pub ips 3*.108.234.145-150
>>> E0/0 3*.108.234.146 outside public
>>> E0/1 192.168.1.1 inside
>>> E0/2 192.168.3.1 dmz
would like to map dmz host 192.168.3.107 to external 3*.108.234.147 on port 5000 and 50001 LOCAL LAN should also be able to get to dmz host ports.i've tried a few configs and also following this example:
[URL]
without any luck, here is my config, also posted the out put of show arp which is able to see and ping the host on dmz, also the output of show access-list which shows hits to it.
prophase-pix(config-if)# show running-config
: Saved
:
ASA Version 8.2(1)
!
hostname prophase-pix
enable password encrypted
[code]....
Cisco Firewall :: How To Configure ASA 5505 And 5510
Mar 18, 2012I am absolutely new in the enterprise firewall world but I would like to start learning how to configure ASA 5505 and 5510. I did some research myself and I found that the material or the topic itself is a huge adventure (lots to read and understand). My company uses IOS versions until 8.2 due to the differences in the NAT-ting rules with 8.3 and 8.4.
View 1 Replies View RelatedCisco Firewall :: Configure ASA 5510 For ActiveSync
Feb 28, 2012I need to allow connection from IPHONE (in Internet) to connect Exchange on private network, synchronising with activesync (https) We have a microsoft TMG on frontal (inside network)
What is the method to parameter CISCO ASA using clientless access: Port forwardind? smarttunnel, web proxy? Nat?
i want the activesync request to cross ASA to go directly on TMG without asking password and user
Cisco Firewall :: ASA 5510 - Getting Error When Try To Configure
Aug 21, 2012I recently bought an all brand new ASA 5510 and it is here by my side. I'm trying to configure it but when entering https://192.168.1.1/admin I get Page Not Found error on IE. I'm able to ping 192.168.1.1 and have success telnet 443 port.
View 13 Replies View RelatedCisco Firewall :: 5510 - Load IOS And Configure From Another ASA?
May 2, 2011Have a new ASA 5510 connected to the laptop via console. I need to load the IOS and the configure from another ASA. I have tftp client on the laptop. Do I just need to set the inside IP to the same subnet as my laptop? Will I need a crossover cable?
View 1 Replies View RelatedCisco Firewall :: Unable To Configure NAT ASA 5510
Jun 15, 2011I have an ASA 5510 and I can not configure fine.
My problem is that I have 10 public address connected to ASA and each public address is redirectioned to an internal IP address.
An of these public address is the ip address of mi ASA.
how to configure and access-list and an NAT, the others I will configure.
interface Ethernet0/0
description Interface_WAN_World-Ttrends
speed 100
duplex full
nameif outside(code)
Cisco Firewall :: ASA 5510 - Configure HA Failover
Jun 8, 2013I have 2 ASA5510-SSL50-K9, can I configure HA Failover ?
View 7 Replies View RelatedCisco Firewall :: Open A Port In ASA 5510 Firewall Using ASDM?
Oct 20, 2012I would just like to to open UDP port 123 in the ASA 5510 Firewall so that our Primary Domain Controller could use this port to sync time with an external time source. We have already added an access rule for this port under the firewall configuration in ASDM 6.4 and this port was also allowed in the inbound and outbound rule of the PDC's Firewall but it seems that it was still blocked.
View 23 Replies View RelatedCisco Firewall :: 5510 Need To Configure Public IP In Few Devices
Apr 13, 2013I have a few devices that the manufacturer told us we have to set with a public IP (No Natting) We have Internet ->ASA5510-> Switch 3550 with 3 vlans. Up to now we have always use Natting to configure internet access to specific devices. I heard setting up a witch with one VLAN connected to the internet and all other internals is a bad idea. that was the only Idea we had.
View 3 Replies View RelatedCisco Firewall :: How To Configure ASA 5510 CSC Anti X Edition
Dec 13, 2011how to configure ASA 5510 anti X edition ? Can I have a link explaining the configuration step by step ?
View 2 Replies View RelatedCisco Firewall :: Configure Internet Access - ASA 5510
Dec 9, 2012I have to configure a default-factory firewall (ASA 5510) in a simple scenário like this image represents:At this moment i have configured the interfaces as represented above and at this moment what i want is grant access from a LAN computer (10.10.0.0/24) to the internet.
Should i configure some acl? I read that all traffic from an interface with a superior security level to other interface is allowed, so since my inside interface has a security level of 100 and the outside 0, it should be possible access to internet from an inside computer?!
From all configurations and examples i have seen around, they all contemplate a fixed IP address from the ISP, but in my scenário i have a dynamic one. This fact matter for the configuration i want to do?
My firewall is running the software version 8.2(5).
Cisco Firewall :: Configure ASA 5510 For Internet Access
May 10, 2013Cisco ASA 5510 and I want to configure it as an access gateway following this .[URL] the basic configuration steps on what to do on ASDM.
View 2 Replies View RelatedCisco Firewall :: How To Configure 4GE SSM Or ASA 5510 Internal Data Ports
Feb 4, 2013I have inherited an asa 5510 whit 4GE SSM module installed. The asa runs fine, but i can not use the 4GE SSM ports. Using ASDM or console i can get and configure the gigabitethernet1/x ports but i can not get traffic on it. The ping from the console to the ip address of the Gigabitethernet1/0 is successful. On switches or hubs connected to those ports i can not see the port's mac address. The two Internal-data0/0 and Internal-data1/0 are down and i can get they up. How to configure 4GE SSM or ASA internal-data ports.
View 8 Replies View RelatedCisco Firewall :: 5510 To 5520 Configure File Transfer?
Jan 3, 2013Is it possible to import the config of a 5510 to a 5520. Trying to replace two 5510's with 5520's and wondering is there a way import the existing config files for the 5510's into the 5520's?
View 3 Replies View RelatedCisco Firewall :: How To Configure 5510 - 2611 Router / Two 2960 Switch
Dec 29, 2012I have one Cisco ASA 5510 with 2611 router two 2960 switch how to configure.
View 1 Replies View RelatedCisco Firewall :: Configure ASA 5510 For Individual Server Traffic Routing
Jan 27, 2013I am wondering if this is possible. We have multiple internet connections with fixed IP's coming into the office. We'd like to use one for FTP backup and another to service our websites. From what i have read a 5510 doesn't do policy based routing, but we'd like to configure our ftp server to use one of the internet pipes and our webserver to use another internet pipe. Is that possible?
We'd have two outside fixed IP interfaces and two internal interfaces. I could then use one of the internal interfaces for the web server and the other for the FTP server. consequently if the internal web server and FTP server use the fixed IP"s corresponding DNS server wouldn't that effectively route all FTP traffic out one interface and all web traffic out the other?
Then the FTP traffic would be NAT'ed to an internal interface and the HTTP & HTTPS traffic would be NAT'ed to a separate internal interface.
Then if each of the internal servers used the corresponding internal NIC on the ASA as it's gateway and the fixed IP's that correspond to the external DNS server, then it would affectively only use that gatway out for traffic? Would that work? Does it should route traffic out those pipes correct? Will the asa support two different next hop routers for the two different interfaces?
Cisco Firewall :: ASA 5510 6.1 To 8.X Via USB Port?
Jul 23, 2012I've got an unconnected ASA 5510 running IOS 6.1 that I need to upgrade to 8.X (I believe 8.4 is available). The unit is a blank/default configuration and is not on any network so it can't be easily accessed via Ethernet. Is there a method that I can use its onboard USB port (0 or 1) to plugin a USB memory stick with the 8.X...bin file and process the upgrade that way?
View 2 Replies View RelatedCisco Firewall :: Port Forwarding With ASA 5510?
May 2, 2011i have a asa with a outside IP address of 140.32.121.5. behind this firewall i have a cisco MWR 2941 that i would like to connect to via telnet. its inside ip address is 10.10.10.2. my reasoning for this is because i cannot SSH or telnet from a ASA so i need to have the ASA push my telnet request to the router on its inside interface.i have tried some NAT examples but i am very green with NAT. i have also built access lists that look like the follow " access-list 101 permit tcp any 10.10.50.2 eq 23. and then tied the access-group 101 with the outside interface. this also with no success.
View 1 Replies View Related