Cisco Routers :: How To Allow Web Access Into RV120W

Mar 31, 2012

I had WRT54G2 and recently switched to an RV120W.  I have an Internet accessible camera system connected to my router.  Before, this worked fine... there is a dns service (DynDNS.com) that is configured as part of the camera setup.  I would then just enter [URL] and I would connect to the cameras.  I install the new router (RV120W) and I can no longer connect to the cameras.  I do not recall any configuring that I had to perform on the old router.
 
why the RV120W isn't letting me get to the cameras?

View 3 Replies


ADVERTISEMENT

Cisco Routers :: Ssh Access To Rv120w?

Feb 8, 2012

What is the default login/pass of cisco rv120w for ssh access ?

View 1 Replies View Related

Cisco Routers :: RV120W Cannot Access To Any Host On LAN

Dec 5, 2012

I recently bought Cisco RV120W-E V01 and insall it in my home (with firmware 1.0.4.10). I want to establish PPTP conection from my notebook (when I am not at home) and to access (through VPN tunnel) to all hosts in my LAN (with no port restrictions). I configured VPN (PPTP) users and I can establish PPTP tunnel from client to RV120W. My traffic to Internet is going through VPN tunnel to RV120W and then out on Internet, and that is fine. What is not fine is that I can not access to any host on my LAN, and that is the main reason why I configured PPTP tunnel. It is not clear to me, when I am reading admin guide, what I have to configure to allow only my tunnel traffic to reach LAN hosts.

View 2 Replies View Related

Cisco Routers :: RV120W - Can't Access Static IP Devices Via VPN

Feb 27, 2013

I have a RV120W used to provide VPN access to several industrial devices. Some of these devices are assigned IP address via DHCP in the router. One cannot do DHCP, so it has a self-determined static IP.
 
The VPN works well for all the devices that are assigned IP's. However, it does not allow me to connect to the device that has a static IP. I can connect to it fine when I am on the LAN or WLAN, but cannot ping it via the VPN.

View 2 Replies View Related

Cisco Routers :: Rv120w VPN Tunnel From Internet / Cannot Access Remote Servers

Feb 23, 2012

I have setup a site-to-site VPN tunnel between 2 sites using CISCO rv120w.Everything works fine; any PC on one site can access all systems on the other site and vice-versa.The issue I have is when I start a VPN connection another site on Internet using IPSecuritas.I can initiate a VPN to site 1 and site 2; but when connected, I can only access servers that are located into the same site I'm connected to; I cannot ping the remote site.The Range of IP addresses on the internet during my tests is 192.168.11.0 (I 'm using a Mac)

-Systems with IP 192.168.1.1 and 192.168.10.1 are bridges
-Systems with IP 192.168.1.2 and 192.168.10.2 are CISCO rv120w

View 4 Replies View Related

Cisco Routers :: RV120W / Configure Bridge Mode For Internet Access?

Jan 1, 2013

We have a RV120W Wireless-N VPN Firewall and we want to configure the router in brigde mode (transparent). Because we have another Firewall, use for filtering and default gateway on the LAN. The ISP provide IP address by DHCP, so we must connect the internet connexion to the WAN interface. But How can we do for connected the RV120W to our firewall? The router mode on the RV120w allows-it to make this configuration?

View 1 Replies View Related

Cisco Routers :: Configure RV120W So That Internet Users Can Access Internal Company Websites?

Apr 4, 2012

How does one configure the router so that Internet users can access internal company websites? The only thing that appears is the Cisco router login. Also I need to configure Terminal Services and its not on the list under Service.

View 2 Replies View Related

Cisco Routers :: VPN Between One RV120W And 4G

Feb 7, 2012

I would like to set up a site to site VNP connection between 2 RV120W routers, preferably via IPsec.
 
The problem is that I would like/have to use a 4G modem router (model TINY) which connects to internet in front of the RV120W (on the local side)
 
I have no problem with that on the remote site that RV120 connects directly to internet via a public IP address on the WAN port.
   
Local network 192.168.1/24-----RV120W----192.168.100.1—Tiny---Public IP--------INTERNET
   
INTERNET--------PublicIP—RV120W—Remote local network 192.168.2/24

View 1 Replies View Related

Cisco Routers :: RV120W Routing With Two VPN?

Jan 12, 2012

I've a RV120W with the last firmware version (june 2011), i want to create two vpn tunnel:

- Professional: lan routing all packet for the 192.168.0.0/24 to the first VPN tunnel

- Other: all other address IP destination to a second VPN tunnel
 
The first tunnel (professional) is ok but what rules can i use to configure the second ?

View 2 Replies View Related

Cisco Routers :: RV120W SIP Over VPN And 1.0.2.6 Firmware

Sep 24, 2011

Upgraded to 1.0.2.6 and all of a sudden SIP devices working over the VPN no longer work. Downgrade to 1.0.1.3 and they work again. My guess is that some ports are blocked over the VPN in 1.0.2.6
 
I thought the general idea was that firmware ugrades fixed bugs rather than introducing them.
 
Suggestion for Cisco:- Zip the firmware image downloads, or else have an upgrade process that includes a CRC check, that way at least the poor punter will have an indication if they have been corrupted. I had a subtle memory problem that was corrupting some files. The firmware upload appeared to complete properly and you could log on OK but some of the menu choices resulted in a hang with the "Please wait... the page is being loaded" message. Careful checking of file sizes revealed that the file I was uploading into the router was a few hundred bytes different in size to the one on the website, must have been corrupted during the download. But the upload proceeded normally with no indication of any error. It's a pretty basic safeguard that should be in there as a matter of course with the router performing a CRC check and showing an error if it fails.

View 2 Replies View Related

Cisco Routers :: Cannot Get Vpn To Work Using RV120W

Sep 12, 2011

Rx:, recently I have perchase 2 RV120W routers thinking that it must be very easy to setup the site to site vpn. i cannot get my remore office to link to my main office and vice verser.
 
Scenaro
 
- I'm using 2 RV120W routers for each site.
- Site A using a subnet of 192.168.10.0 mask 255.255.255.0
- Site B using a subnet of 192.168.11.0 mask 255.255.255.0
 
I have setup the VPN using the wizard and I got site to site tunnels connected and show as 1/1 Connected (1 user)  in the status he IPsec connection status show

--Policy Name: VPNA
--Endpoint : public IP address from my ISP 203.117.222.221
--Packets Tx:145  Rx:0 and Kbytes shows Tx: 29.55 Rx:0
 
Q1  why I cannot use dynamic DNS naming in the policy setting ? eg: aaa.dyndns.org, I have to use the ip address instead eg: 203.117.222.221
 
Q2.  I cannot connect from Site A to Site B , I can't even do a ping to 192.168.11.1 from  Site A. even though it show the Site to site tunnel is coonected.

View 2 Replies View Related

Cisco Routers :: RV120W Routing Through VPN

Aug 6, 2012

I've just set up an IPSec VPN between 2 x RV120W which are both behind other router. Here's what we have :
 
RV120W #1 (192.168.1.254) --- (192.168.1.1) Office Router #1 (PUBLIC IP) --- (((Internet))) --- (PUBLIC IP) Office Router #2 (192.168.2.1) --- RV120W #2 (192.168.2.254) 
It works great, tunnel is UP.
[Code]....

View 1 Replies View Related

Cisco Routers :: RV120W Routing Through VPN?

Nov 21, 2012

I've just set up an IPSec VPN between 2 x RV120W which are both behind other router. Here's what we have :
 
RV120W #1 (192.168.1.254) --- (192.168.1.1) Office Router #1 (PUBLIC IP) --- (((Internet))) --- (PUBLIC IP) Office Router #2 (192.168.2.1) --- RV120W #2 (192.168.2.254) 

[Code]....
 
Now, I need to be able to reach the server (192.168.1.100) from a PC on LAN #2 with IP 192.168.2.50. So, I've created au static route on Office Router #2 (192.168.2.1) because of course it doesn't know how to reach private subnet 192.168.1.x. My static route looks like this :
 
192.168.1.0 / 24 (Destination network) --- 192.168.2.254 (Gateway) 

...but it doesn't work, no ping. When I do a tracert to server IP (192.168.1.100) from PC on LAN #2 (192.168.2.50), the result is :

1st jump ---> 192.168.2.1
2nd jump --> 192.168.2.254
...and it doesn't go further.

View 3 Replies View Related

Cisco Routers :: RV120W-Bug In WAN Traffic Meter

Dec 21, 2011

I configured my RV120W (Firmware:1.0.2.6) to count the traffic on my network. I set the monthly limit to 99999 and did not change anything else.So after a few hours, the traffic counter shows 2048 MB for outgoing traffic. This is impossible, because the DSL-connection is too limited in upload to cause this huge outgoing traffic in 6-8 hours. When I reset the counter at night, the next morning the device shows 2048MB again (even if there was no traffic at all, just some clients syncing time with NTP). I did already reset the device to factory defaults and reconfigured everything from scratch.

View 0 Replies View Related

Cisco Routers :: RV120W - Firewall Rules

Jul 5, 2012

I have a problem with firewall rules. If I set some rules for open communication and some for closed, so I cannot reorder from the end to begin.

Last rules are at the end of all. So I can only reorder in one pages.(I have about 33 rules = 3 pages of rules)

View 4 Replies View Related

Cisco Routers :: RV120W To Setup For Vpn Service

Oct 24, 2011

I was wondering if I could setup my router CIsco RV120W to be able to connect to a VPN serice for my internet connection.  Looking to give my small home netwok more sercurity.  Is it possible with the Cisco firmware to be able to setup a connection to VPN serice.  Do I have the compabilites with this router? 

View 1 Replies View Related

Cisco Routers :: How To Setup RV120W For QuickVPN

Aug 22, 2011

The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?

View 1 Replies View Related

Cisco Routers :: RV120W Bridge WAN To Vlan

Apr 26, 2012

I need to configure a rv120w in order to make it work at the same time for data and digital tv. The fact is that the set top box for the idtv needs an IP address that will be delivered directly from the ISP. So I need to setup one LAN port that will be bridged to the WLAN connection (the stb will be connected to that lan port), and another port that will be connected to the LAN swicth so that the rest of the network has internet access. I can't see anywhere a way to create such a bridge. Quite disappointing as it's possible to do so on open source platforms such as openWRT..

View 3 Replies View Related

Cisco Routers :: RV120W - SSL Certificate For Client

Oct 30, 2011

When I try to export an SSL Certificate for a Client I get a htps . CSR file instead of the .PEM file. So, I can't update the client computer with the correct certificate.

 Firmware: 1.0.2.6 

View 3 Replies View Related

Cisco Routers :: RV120W Cannot Login To Administer?

Mar 25, 2012

I have just received an RV120W. Default setup (out of box), but when I http://192.168.1.1 and login, the next page comes up as : Internet Explorer cannot display the webpage ? Internet Explorer is version 9.
 
I have allowed both http and https at 192.168.1.1 in Internet Explorer security settings/Trusted Sites ?
 
Is there a console connection to this box ?

View 3 Replies View Related

Cisco Routers :: RV120W Multiple Static IP On WAN?

Oct 16, 2012

Is it possible to have 2 IP addresses on wan and setup specific routing rules for each IP ? Or do I need to use another router for that and if which one ?

View 4 Replies View Related

Cisco Routers :: RV120W New Firmware 1.0.3.10 Download?

Apr 29, 2012

Where can I download the new firmware 1.0.3.10 for RV120W?
 
[URL]

View 25 Replies View Related

Cisco Routers :: RV120W QuickVPN And Windows 7

Oct 29, 2011

I have been battling with my Cisco RV120W router and QuickVPN.Running Windows 7 Home PremiumPerformed a fresh install to factory out-of-box install for WindowsRemoved NortonDid NOT perform any windows updatesInstalled QuickVN version 1.2.4.1I have updated the firmware to the latest version (confirmed by cisco)I can connet to the router and have a stable connectionI can ping both the router IP and the shared file server IPWhen I enter the shared file server IP into the search field (e.g. \192.168.100.199) and press enter, I see a connection to "share", so I click on this and then see "FolderName" of my shared files. I click on this folder and I get a timed out error.When I enter the routers IP address into a browser (IE8 as factory installed) I get a timed out error also.In the past, I have installed all important and recommended updates for Windows and still get the same scenerioI have called cisco support and went through router settings, assigned them a VPN username, they log in and can access the files without issue (What the @#$$@#$)Cisco support spent plenty of time with me, but since they could access my network and since I could ping my devices, they had no other suggestions further.
 
I have this fresh factor out-of-box install. I know this is most likely something to do with my laptop that I am trying to use to connect to the network. I have Frontier as my ISP for home. I don't know if there is anything they are doing to interfere with my connection. I have tried to connect to the network via ComCast as well, with no luck.tell me if there is something I need to tweak in my Windows 7 settings?

View 11 Replies View Related

Cisco Routers :: Setup Vpn Gateway Between Two RV120W

Nov 6, 2012

I gave setup a vpn gateway between two cisco RV120W. The connection is established.
 
Active IPsec Security Association Table: Policy NameEndpointPacketsKBytesStateActionRxTxRxTxVPN-INTERDIO87.65.38.62000.000.00IPsec SA Established Poll Interval: (Seconds)
 
The problem is that there is no trafic. Even ping te remote internal nework is not working. For testing i have disabeld at both sites te firewall and have configured both with an access rule any to any.

View 1 Replies View Related

Cisco Routers :: Cannot Connect QuickVPN To RV120W

Mar 6, 2012

I have a Cisco RV120W connected to the internet. I have configured a QuickVPN user on the router, but I cannot connect via QuickVPN no matter on what PC I try (with firewall or without firewal, Windows XP, 7, ...). On the router it says the VPN user is connected, but on the client PC I receive remote gateway not responding. In the logs it says failed to ping remote VPN router. I tried changing all settings I could find on this forum, but the result stays the same (changed port to 60443, deleted all IKE and VPN policies, allowed ping, disabled fragmented packets etc...). None of all the settings seems to get any result.

View 11 Replies View Related

Cisco Routers :: New Admin Guide For RV120W At 1.0.4.10

Jun 2, 2013

Trying to setup Three networks all with different IP ranges.I assume I can create a new VLAN and associate that VLAN with one of the four available ports.

Port 1 can have 192.168.1.1 - 254, Port 2 can have 192.168.2.1 - 254 and Port 3 can have 10.0.1.1 - 254.
 
But the Admin guide I just downloaded is NOT for 10.0.4.10.  It shows Networking > LAN > VLAN Configuration.My screens show Networking > LAN > VLAN Membership.
 
So I am not sure how to make Port 2 associate with VLAN98 ( I created VLAN98 and 99 for the other two networks).  There is a membership table that you can Tag or untag for each of the four ports - is that it ?

View 2 Replies View Related

Cisco Routers :: RV120W Cannot Select N Speed Under Wi-Fi

Aug 27, 2012

I recently purchased a RV120W router and I am having a problem selecting n speed under the wireless settings.
 
If I select B/G/N-Mixed mode then when I go to save the change I get B/G/N-Mixed B/G/N-Mixed in red letters and it does not save.  If I select N only then when I go to save it says in red letters N only N only.
 
It does not matter if I pick 20 only or 20/40.  It does not matter if I enable or disable U-APSD.  It does not matter if I use the LSB or USB side.
 
Firmware Version:1.0.3.10 :When I got the router it had an older firmware if I remember correctly, and it would let me change to n speed.

View 3 Replies View Related

Cisco Routers :: Setting Up A VPN Connection On A RV120w?

Oct 12, 2011

Looking for assistance in setting up a VPN Connection on a RV120w.Trying to establish VPN with Android tablets utilizing Anyconnect.I currently utilize IPsec connections into RV120w without issues from desktops/laptops. (I am not real familiar with certificate based connection, and how to export from RV120w and import into Android)

View 2 Replies View Related

Cisco Routers :: RV120W Connectivity And Communication Between PCs Within Same LAN

Aug 10, 2011

I have RV 120W Wireless-N VPN Firewall and having issues with connectivity and communication between PCs within the same LAN.  I tried the following to check connections:

1. Finding the computers within the workgroup using wondows network or (finding the computer) without avail.
2. Pinging the IP address of the PCs within the LAN.  Request Timeout is given.
3. Pinter Network is working fine.

View 6 Replies View Related

Cisco Routers :: RV120W To Allow For Remote VPN Connections

Apr 5, 2011

I'm trying to configure my RV 120W to allow for remote VPN connections by a few salesmen. I tried to set it up through the wizard, but the menu tells me that the Remote Information (IP or FQDN) is assnged when they client connects but I HAVE to put something in there. I tried it with my IP information and can't connect either, but I have a feeling that is my PC's issue with Windows 7 (it just sits on verifying uername and password and then locks up explorer). I don't see anything in the logs about it attempting to connect or anything from my machine- I'm going to work with another but that still doesn't work with the "unknown" IP connection setup.

View 6 Replies View Related

Cisco Routers :: PEAP Authentication Failure With RV120W

Jul 31, 2012

I have a Cisco Small bussiness RV120w and I setup the radius server , WPA2 Enterprise with a windows 2008 NPS radius server . The big problem is that the authentication fails .This is the error that I see in event viewer / server roles / Network policy and access services: reason-code 49 "The connection attempt did not match any connection request policy".The radius key is matching between the server and the client . The radius server is reachable and I don't find any routing issues .Does anybody tested this router with this type of wireless security?

View 3 Replies View Related

Cisco Routers :: Rv120w And Simple Port Forwarding?

Aug 26, 2011

I just got a new rv120w and want to set it up, like my old router. I have a webserver that people around the world, should be able to visit, but I can't figure whats wrong. You can see my settings in port forwarding here.

View 4 Replies View Related

Cisco Routers :: RV120W Drop Internet Connection?

Feb 3, 2013

I have a Cisco RV120W router with 1.0.4.10 firmware. The router drop the internet connections, freeze/timeout in admin interface randomly. How can I determine that this is the router's fault, or if it's the switch / internet access is causing it?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved