Cisco Routers :: RV180 QVPN Cannot Ping Remote Lan PCs

Nov 2, 2012

I can use PPTP and access all the PCs on a flat network at a remote site.  I can ping the pcs and connect with netsupport manager. When I use QVPN I cannot do this.  Why?  I have added custom ports 5405 for NSM and applied ACL put no joy.  I also added PING to ACL but it still doesn't work.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: RV180 Cannot Ping The External IP

Mar 24, 2013

I have setup a new RV180 and it appears to be connected to the WAN, however, I cannot ping the external IP.  In some of the documentation, there are references to default access rules, however, there does not appear to be any rules setup.  What other settings need to be made to allow the firewall to be pinged on the WAN interface?

View 1 Replies View Related

Cisco Routers :: Static IP For Remote RV180 Needed?

Jan 7, 2013

I have a static IP for the host RV180, however do I need a static IP for the remote RV180 ?

View 2 Replies View Related

Cisco Routers :: RV180 - QuickVPN The Remote Gateway Is Not Responding

Nov 19, 2012

I have a RV180 router and i am trying to use the Quick VPN Client version 1.4.2.1. It works fine on my Windows 7 pc, and worked successfully once on the windows XP sp3 pc. But now the XP pc will not work.
 
What looks strange is in the VPN Client Connection Status on the router I see the status is Online, however the XP pc will not ping anything on the network or connect to the RDP pc i want. The QuickVPN Client hangs on "Verifying Network".
 
I tried the suggestions i saw online:

Disabling Firewall
Enabling Firewall
Making user name shorter
Allowing for PING on WAN (replies all come back fast)
Reboot Router
Upgraded firmware to 1.0.1.9
 
I did not adjust the MTU rate as i was not sure what to change it too. AV is AVG 2012.

View 7 Replies View Related

Cisco Routers :: RV180 PPTP Clients - Using Remote Gateway

Jul 31, 2012

Is there a way to configure RV180 to allow PPTP clients to route Internet traffic via its own internet connection?
 
I.e. supporting these client options: "Send all traffic" (Mac/iOS), "Use default gateway on remote network" (Windows).

View 1 Replies View Related

Cisco Routers :: RV180 - Establish Permanent Vpn Tunnel Between Each One Of Remote Sites

Apr 28, 2012

I'm dessigning a network and this is my scenario:

5 - Remote sites (no static IP there)
3 - Remote users (comercial)
1 - Central building (using static ip address)
 
Is it possible to establish a permanent vpn tunnel between each one of my remote sites to the main building, even if I have no static IP address in the remote sites?
 
Do you think that RV180 is the best choice to mannage vpn connection between remote sites and the central building securely and faster?

View 2 Replies View Related

Cisco Routers :: RV180 To Setup A VPN Tunnel Between Remote Site And Central Office

Aug 18, 2012

I bought 2 RV180 to setup a VPN tunnel between a remote site and central office.The VPN tunnel is established, I can ping from central office to remote site but browsing on that server fails. [code]
 
Seems the routing is not really working through the VPN Tunnel.

View 4 Replies View Related

Cisco Routers :: Unable To Access LAN Via RVS4000 QVPN?

Sep 27, 2011

I am trying to setup the VPN access using QVPN with RVS4000 but ran into difficulties I was able to connect to the router using QVPN from WAN, and able to access the router's admin page (my router's ip is 192.168.0.1).  However, I am unable to access anything else on the LAN, including servers and printers.  To make it clear, I am able to access all servers and printers when I am on the LAN!  But nothing when accessing from the WAN via QVPN.

View 1 Replies View Related

Cisco Routers :: RVS4000 QVPN Unable To Connect

Sep 24, 2011

RVS4000 setup at our office. QVPN installed on home pc with Win7 Home Edition and Norton Internet Security 2011. It gets the following error:
 
"The remote gateway is not responding. Do you want to wait? "
 
QVPN version 1.4.2.1, RVS4000 router firmware updated from V2.0.0.3 to the latest V2.0.2.7 as it is the Version 2 Hardware. Same problem. I even uninstalled the Norton NIS 2011, rebooted the machine and enable win 7 firewall without any anti virus software installed, same error. I really need this working as I do a lot of work at home and need remote connection to my computer at work.
 
Below is the error log...
 
2011/09/25 21:32:01 [STATUS]OS Version: Windows 7
2011/09/25 21:32:01 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/09/25 21:32:01 [STATUS]Windows Firewall Private Profile Settings: ON

[Code].....

View 6 Replies View Related

Cisco Routers :: RV042 - Setup Of VPN Using QVPN To Access Vista?

Jul 12, 2009

I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to wait?". If I say yes it go through the login again and hangs. If I say no, it hangsup. I've tried a couple different ideas using tunnelling and static IPs in the router but nothing. All I want is to be able to access one computer through the RV042 over the internet from any other computer using the QVPN.

View 6 Replies View Related

Cisco Routers :: RV180 - Site-to-site VPN And Remote User

Dec 6, 2012

We have successfully establish a site-to-site vpn, but we have some difficulties when PPTP users try to access the remote network linked by this tunnel. LAN users can access the remote network without problem, but users who are connected remotly to the lan (PPTP) can't access computer on the remote network. Is there a way to allow PPTP user to access the remote network ? Adding a route ?

View 1 Replies View Related

Cisco Routers :: RV110W Ping Remote Gateway

Apr 16, 2012

I recently purchased a RV110W wireless router for a client.  I am having issues with the VPN access.  Here is the client's access log:
 
2012/04/17 10:59:41 [STATUS]Disconnecting...2012/04/17 10:59:47 [STATUS]Success to disconnect.2012/04/17 11:00:03 [STATUS]OS Version: Windows XP2012/04/17 11:00:03 [STATUS]Windows Firewall is OFF2012/04/17 11:00:04 [STATUS]One network interface

[Code].....
 
I've called Cisco tech support but the answer is disregard the log message and everything is working, and that I have a configuration issue on my end. 

View 2 Replies View Related

Cisco Routers :: RV180 Ssh And Https From WAN?

Dec 23, 2012

Is there any way to manage the RV180 from the WAN side via https and/or ssh?Also, is ssh from LAN even available?

View 3 Replies View Related

Cisco Routers :: RV180 VPN Does Not Work

Oct 18, 2012

I have an RV180 VPN router.I try to enable the VPN users with PPTP or QuickVPN but is not working.For PPTP sometimes my windows 7 connects to the router, sometimes doesn't connect with a random error message.When it connects, the windows 7 from outside the lan can see the computers from inside the lan but the computers from inside the lan cannot see the windows7 one. This is random also. When i succed to connect, from that computer, the internet is not working anymore.I tried to set the VPN in the same subnet as lan, i tried with different subnet. Is not working.I updated the last firmware. The same.Restore factory settings couple of times, the same.

View 6 Replies View Related

Cisco Routers :: Bug In RV180 Firmware V1.0

Jun 17, 2012

I noticed if you add more than 10 access rules to the Access Rule table, you are unable to reorder past the first 10.Steps to reproduce:Create 11 rules of the same stream direction, outbound or inbound (...I found the bug with outbound, did not test inbound).try to reorder one of the first 10 rules to the end of the list, either by entering "11" manually, or by pressing the down arrow.System responds that "11" is an invalid number, or that the rule cannot be moved.This issue is not reported in the "Known Issues" section of the release notes for 1.0.1.9.

View 2 Replies View Related

Cisco Routers :: How To Connect OS X 10.7+ To RV180 VPN

Mar 2, 2013

Which vpn client to use on os x ? (the one included in os x or another?) Which VPN configuration to use on RV180 ? and Which ports to open on RV180 Firewall ? (or any other parameters)

View 1 Replies View Related

Cisco Routers :: RV180 - Log Warnings With QOS IP Or MAC

May 20, 2013

I had set up QOS for an IP Range and noticed the logs filling up with Warnings - hundreds within less than an hour.
 
I finally reset the router to factory and then step by step re-built my configuration - it was the QOS that started generating these warnings like:
 
Tue May 21 13:18:39 2013(GMT-0500) [rv180][Kernel][KERNEL] [87073.550000] IN=bdg1 OUT= DST MAC=d8:67:d9:c3:a0:2e SRC MAC=00:0e:58:58:57:7a PAYLOAD TYPE=08:00 SRC=192.168.1.193 DST=208.85.44.22 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=19313 DF PROTO=TCP SPT=1768 DPT=80 WINDOW=2534 RES=0x00 ACK URGP=0 MAR

[Code].....

In both cases above, after I started to suspect QOS, I entered a narrow IP range to test and then a MAC to test.  Using a VLAN seems to work fine and generate no errors - even a VLAN for the same associated host(s).
 
I have a support case open about this - didn't get too far yet, but now with a better repro, maybe they will.

View 1 Replies View Related

Cisco Routers :: RV180 What Are The Alternatives For Android ICS

Oct 30, 2012

I  currently have an RV180 in a small business set-up and curently being  accessed remotely by laptops (Quick VPN) and Ipads/Android ICS tablets  (PPTP).  All is working well but I've become concerned about the  security risks of PPTP and would like to shift the tablets to IPSec. 

1) For a  small business are the PPTP risks real?

2) What are the alternatives for Android ICS?  I can't find a Quick VPN client for Android.

3) I can't get the core IPSec VPN in Android to connect to the RV180?  Is this possible? 

View 1 Replies View Related

Cisco Routers :: NATed Did Not Add VLAN On RV180

May 7, 2013

I have RV180 configured with two VLANs. First VLAN is untagged and second VLAN is tagged. The purpose is two have two subnets, with the second subnet used for guest access. Both VLANs have DHCP server enabled. First VLAN is 192.168.1.0/24 and the second VLAN is 192.168.2.0/24, When I connect a computer with untagged Ethernet interface, it gets an IP address from DHCP server on the first subnet i.e. 192.168.1.100 and it can successfully access Internet. When I connect a computer with tagged Ethernet interface (I am using VLAN ID 10), it gets an IP address from DHCP server on the second VLAN i.e. 192.168.2.100. So far so good. I can successfully ping hosts on the Internet i.e. ping www.google.com. But I cannot access Internet from the web browser. I captured Wireshark trace and here is what I see...

1. TCP SYN. Source IP 192.168.2.100, destination IP A.B.C.D. Ethernet frame has VLAN tag (VLAN ID 10)
2. TCP SYN ACK. Source IP A.B.C.D, destination IP 192.168.2.100. Ethernet frame has VLAN tag (VLAN ID 10)
3. TCP ACK. Source IP 192.168.2.100, destination IP A.B.C.D. Ethernet frame has VLAN tag (VLAN ID 10)
4. TCP Data. Source IP 192.168.2.100, destination IP A.B.C.D. Ethernet frame has VLAN tag (VLAN ID 10)
5. TCP Data. Source IP A.B.C.D, destination IP 192.168.2.100. Frame is untagged
 
The problem is at #5. Packet came back from the Web Server. RV180 properly NATed it to the local IP address. But it did not add VLAN tag.

View 8 Replies View Related

Cisco Routers :: Rv180 Dropping LAN Connections?

Mar 13, 2013

I just recieved a new RV180 yesterday and it will not connect to my switch. Router was updated to the newest firmware, reset to factory settings. I did change the ip and ip range. Router works fine with one computer attached direct. As soon as I connect my sf300-24P to it, the WAN and LAN lights all light up and then go out. Only the WAN will light back up. I have no connectivity to the router. I plug the laptop to the router directly and no LAN lights come on and can not see the router with arp -a.

View 6 Replies View Related

Cisco Routers :: How To Enable Telnet On RV180

Mar 9, 2013

I'm trying to telnet into the my RV180 router. How do I go about it.
 
I created 3 VLANS

1  at 192.168.1.1
20 at 192.168.20.1
30 at 192.168.30.1
 
Here is the Multiple VLAN Subnet Table:

1     192.168.1.1    255.255.255.0DHCP ServerEnabled 10192.168.10.1255.255.255.0DHCP Server  Enabled 20  192.168.20.1 255.255.255.0    DHCP ServerEnabled 

I can ping the router at all 3 IP addresses.How do I enable the telnet service on the router?

View 1 Replies View Related

Cisco Routers :: RV180 And IPSec VPN Client

May 22, 2012

Does RV180 router support client VPN connections using regular Cisco VPN client? Datasheet says it works with Quick VPN client.

If regular non-Quick client is not supported, can both clients coexist (= be installed simultaneously) on the same PC?

Does Quick VPN client support split tunneling?

View 2 Replies View Related

Cisco Routers :: Does The RV180 Series Support 6rd

May 10, 2012

I'm considering upgrading a small business to the newly released RV180 or RV180W.Does the RV180 series support 6rd (IPv6 rapid deployment?).I see 6rd documented in the other small business routers (e.g. RV110), but I can't find it in the RV180 documentation.

View 1 Replies View Related

Cisco Routers :: RV180 Quick VPN To Connect

Aug 6, 2012

I'm having issues getting QuickVPN to connect. I think it's an issue pinging the gateway but I'm not 100% sure. We are using Comcast Business, I have placed the RV180 in the DMZ. The setup looks like this: Internet -> Comcast router -> RV180 (DHCP) -> rest of network.

View 5 Replies View Related

Cisco Routers :: RV180 VPN Guide Required

Apr 3, 2013

Is there a guide to setup a VPN connection using this router? I've follow the setup guide provided by cisco but I'm having issues.  When attempting to connect using the quick vpn client, I get error messages.

View 1 Replies View Related

Cisco Routers :: RV180 IPSec Needs Polishing

Apr 26, 2013

Any news on a new firmware for the RV180? I have the most recent version but it still has lots of bugs. IPSec needs polishing. In addition the Logging functions don't work well. I can't send to a syslog and when I try to email the logs I get a email saying there is no data even though several pages of enteries are visible in the web GUI. I've checked the profiles and they are correct. I even tried using just the 'default' profile but no luck.

View 2 Replies View Related

Cisco Routers :: SB RV180 VPN Users Not Showing Up?

May 15, 2013

I have a Cisco Small Business RV180 and I have several VPN users configured.  IPsec between my home router (also an RV180) and work router (router in question) is working fine, several PPTP users working fine and 1 QVPN user that works as well.  I set up another qvpn user and it didn't work.  I went back into the router to check and make sure I hadn't goofed something up and saw that I had 8 lines, 1 and 2 were the QVPN users and 6 other PPTP users, however, the "pages" footer (for lack of a better word) only displays 1 -5 of 5 instead of the 1-8 of 8 I would expect it to show.I dumped the cfg file and opened it up, all 8 user configurations show up.  One was my user account which showed negative numbers for the logon time, something like -1day -hours -minutes -sec, so I thought that that might be locking up the router or something so I deleted my PPTP account but it didn't allow the new user access.  I deleted all PPTP accounts and no luck there either.I'm running firmware 1.0.2.6.

View 4 Replies View Related

Cisco Routers :: RV180 Router Will Not Connect To ISP

May 16, 2012

I am contemplating replacing my Juniper Netscreen 5GT with this new RV180.
 
serial number 161303LB 
RVC180 V01
 
However, it will not connect to my ISP (DSLExtreme) using the same settings I have been using for multiple years. DSLExtreme is using AT&T DSLAMS, as you likely know, and I am unaware of anything unique about how they serve DHCP?
 
The Cisco wizard sits on the WAN configuration check forever, and never connects. I have rebooted it and allowed it to sit for fifteen minutes trying. I think that is enough.
 
The 5GT WAN interface is configured for "DCHP Client" and that is how the RV180 is configured.
 
It is a standard 6MB DSL line, I have tried both the existing cable, as well as the provided one to connect to the D-Link 2320B modem/bridge, which, as I indicated, syncs almost instantly with the Netscreen. No difference when the cables are swapped.

View 3 Replies View Related

Cisco Routers :: Very Slow WAN Speed (RV180)?

Jan 30, 2013

My brand new RV180 seems not to be able to exceed 1.1 MB/s WAN download speed. Using a simple Linksys WRT-320N I used to have 5-6 times this speed. Value is with default settings, various sources (HTTP/NEWS downloads). Trying to improve this wit QoS-settings dows not improve this in any way.

View 2 Replies View Related

Cisco Routers :: RV180 Will Not Connect To ISP Using PPPoE

Mar 17, 2013

The RV180W would not connect to an AT&T DSL connection using PPPoE (modem in bridge mode), or behind the DSL Modem/router with the DSL modem/router providing a dynamic IP to the RV180W or a cable modem (TimeWarner Roadrunner dynamic IP).  I upgraded the firmware yesterday and now the RV180W will connect to a dynamic WAN IP, but it still will not connect using PPPoE.
 
I have also noticed the admin interface is only accessible about 75% of the time.  When going to 192.168.1.1 the login prompts either don't come up or if they do, after logging in, the screen never fully loads after that.  I have to reboot the router to get it to work.
 
Also, the router has not yet pulled DNS from either the DSL or the cable modem.  I had to manually enter those addresses.

View 1 Replies View Related

Cisco Routers :: Connect L2L Between RV180 And ASA5505?

Feb 27, 2013

I've been trying to connect L2L between RV180 and ASA5505 but no succeed.I can do RV180 to RV180 l2l with one of it on Aggresive mode. working configuration sample of RV180 L2L ASA5505?

View 1 Replies View Related

Cisco Routers :: RV180 PPPoE Not Working

Oct 15, 2012

My RV180 does not route properly between LAN and WAN through my PPPoE account. I am able to ping public IPs directly from the RV180 (through the diagnose section) but can not do it from any PC on LAN. The exact same configuration works perfectly well with a Linksys WTR610N. I upgraded formware from 1.0.0.30 to 1.0.1.9 but that did not make any difference.
 
The only time the RV180 will route is right after I reset to factory defaults and re-enter PPPoE account name and password. If I then reset my modem or the RV180, the RV180 does not route anymore between WAN and LAN even after several minutes and even though I can ping public IPs from the RV180.

View 18 Replies View Related

Cisco Routers :: RV180 With AnyConnect 2.5 VPN Using DTLS

Sep 17, 2012

My work laptop uses a Cisco AnyConnect VPN Client (Software Version 2.5.2006). The connection protocol is DTLS.I recently upgraded to a Cisco RV180 at home at it is running the latest software version (1.0.1.9).
 
Since the RV180 went into service the work laptop will connect intermittantly. Usually email works but web browsing and and other services do not. It is slight strange behaviour- and seems to defy what a VPN should do......
 
The behaviour is very repeatable. For example from the customers office the laptop connects perfectly via VPN and if I swap back to an older inferior make of router at home VPN also works normal without changes to the laptop configuration.
 
I work for a large company (70,000+ employees) and we use "standard" builds so altering the laptop configuration is not really an option.
 
It seems to me that the RV180 doesn't support the DLTS VPN connection (indeed DLTS passthrough isn't an option in the VPN passthrough list) and is possibly blocking some incoming packets on the WAN interface.
 
I haven't yet tried a firewall rule to allow a DLTS (or UDP perhaps?) connection back in from the WAN side (obviously from just the IPs at my work end) but this is the only option I can think of to make this machine connect "correctly".

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved