Cisco Switching/Routing :: 6509 Monitoring Session Experiencing A Large Packet Loss
Aug 16, 2012
I have been searching the message boards and wasn't having much luck. I am running some monitoring sessions on my 6509 and on the VLAN I am monitoring, I am experiencing a really large packet loss. If we hook up a laptop to the destination port and run wireshark we are seeing between 80% and 90% packet loss. I dont see the packet loss on the show port command, but I do on the show int vlan command.
The config is as follows:
Session 2
---------
Type : Local Session
Source VLANs :
RX Only : 500
[Code].....
I was doing some reading on Egress vs Ingress and I am wondering if the Egress SPAN replication state could be causing the packet loss that we are seeing or does the ingress & learn command override that?
View 0 Replies
ADVERTISEMENT
May 22, 2013
We have a site were we have a 887 cisco hsiung a GRE tunnel
When pinging anything froom the tunnel source to the tunnel dest on the local lan we get a 50% packet loss
ping
Protocol [ip]:
Target IP address: 10.9.93.22
[Code].....
replicated the setup exatly in our lab and it works 100% with exactly the same config.
View 2 Replies
View Related
Mar 11, 2013
I have a cisco 3560E switch setup with LACP, when using LACP i receive alot of packet loss / output drops
When a ping from the server behind LACP:
--- google.com ping statistics ---
44 packets transmitted, 39 received, 11% packet loss, time 42990ms
what would cause this packet loss with lacp?
some output from the switch:
Port-channel12 is up, line protocol is up (connected)
Hardware is EtherChannel, address is d0d0.fd58.7390 (bia d0d0.fd58.7390)
Description: LACP-PORT
[Code]....
View 2 Replies
View Related
Oct 2, 2011
we have a 6509 with ios 12.2.33SXJ
we have 2 WS-X6516-GE-TX, WS-X6516A-GBIC, and a WS-X6748-GE-TX with a WS-F6700-CFC daughtercard
our sup is a WS-SUP720-3B
we are experiencing packet loss for everything connected in the WS-X6748-GE-TX blade, right now we dont have any production device in that blade due to the packet loss we are experiencing.
this switch was running hybrid before it is now running native ios, however I can't recall if we didn't have that packet loss before. do i need to update a firmware of the card or daughtercard (if this is possible, can't say i've done it before).
View 10 Replies
View Related
Jul 26, 2012
I have always done my port monitoring (SPAN) on Cisco layer 3 switches with no issues. This time I am trying to do this on a Cisco 2901 router:
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc1)
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M2.bin
I need to have the source port gig0/0 and destination port gig0/1. There is something about the gig port enumeration (slot/port#) that makes the command rejected. It is self explanatory:
#sh ip int brie
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0 xxx.xxx.xxx.xxx YES NVRAM up up
GigabitEthernet0/1 unassigned YES NVRAM up up
Serial0/0/0:0 unassigned YES unset up up
[code]....
It doesn't matter what slot or port number I use, it is always rejected. The command is rejected for Both destination and source gig interfaces. I tried a wide variety of slot/port numbers. To my best understanding the complete port names are: GigabitEthernet0/0 and GigabitEthernet0/1, so why does it think there has to be another digit after 0/0 or 0/1? Does it have anything to do with the Embedded-Service-Engine0/0 being administratively down?
View 4 Replies
View Related
Mar 26, 2012
I have a Cisco 2960S stack and I'd like to tune the timers so that packet loss is minimal if a switch fails.
View 9 Replies
View Related
Apr 11, 2012
I have a Cisco 2960S stack and I'd like to tune the timers so that packet loss is minimal if a switch fails.To simulate a failed switch I have reloaded it while running a continuous ping to a management address on the stack's SVI: [code] As I see the same results when a ping is directed through the single switch (switched), and through the firewall (routed), I'm inclined to think that this is due to the stack failover timers on the Catalyst 2960S.Is it possible to change the stack failover timers (i.e hold down, failover etc), to speed up the failover process?
View 1 Replies
View Related
Apr 19, 2013
I have two 2960-s switches with GLC-FE-100FX fibre modules in and I am seeing packet loss over the link that is connected to the modules. When the interface is shutdown and brought back up it always comes up in half duplex even thought it is set to full in the config. I've seen other posts where you have to use the command no duplex then full duplex to get it to come up int full duplex. This does appear to work when I do a show int it says its full duplex however I'm stil seeing 20 - 40% packet loss on the link which suggests to me there is still a speed/duplex issue. The device at the other end is a Cisco 7200 which is set to 100Full. If I plug a Cisco 2811 into the fibre link I get zero packet loss which suggests its a problem with the switch.
I have changed the modules and fibre cables which makes no difference. As I stated at the start I have two 2960's both are showing exactly the same issue. Details of the switch are below the SFP are cisco branded:
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C2960S-24TS-L 12.2(55)SE5 C2960S-UNIVERSALK9-M
interface GigabitEthernet1/0/25
switchport trunk allowed vlan 380,382,384,386
switchport mode trunk
duplex full(code)
View 18 Replies
View Related
Oct 21, 2012
I have two 6509E's configured with VSS. In this configuration, is it possible to monitor the CPU and memory of each switch independently using SNMP?
View 1 Replies
View Related
Dec 11, 2012
How a 6509 pair handles the loss of the other vss switch, and what happens when the other comes back on ?
View 1 Replies
View Related
Nov 1, 2012
My workstation(10.0.0.250) directly connected to 6509_1 switch. 6509_1 is gateway with ip 10.0.0.5/22. Sometimes routing stop working, but after 3-5 minutes all back to normal.When issue occur i can't ssh to 6509_1, but i connect to second 6509_2 (10.0.0.6) and i can ssh to 6509_1 from it.Then form 6509_1 i try to ping my workstation Wireshark on my workstation show that packet arrive. My workstation reply on it, but switch not accept it.How it possible? As I say after sometime all go back to normal without any changes. [code]
View 2 Replies
View Related
Mar 9, 2013
I can see drops on the 6509 Queue for interface gi1/6 , qos is disabled globaly with qos disabled all packets are in one Queue using best effort my question is if I can see drops using the sh queueing int Gi1/6 command why I am not seeing any drops when I run the Sh int (interface number ) command. [code]
View 7 Replies
View Related
Nov 9, 2011
i have issues logging into one of our core switches.its a 6509 switch but i cannot log in remotely.when i try to console in on the console port, i cannot log in instead i get the above error message.I haven't rebooted yet but would it solve the problem as this switch is a production switch.
View 6 Replies
View Related
Dec 9, 2011
I am experiencing high cpu utilization in my 29501 switch. see the copied sh process cpu output.
CPU utilization for five seconds: 99%/95%; one minute: 89%; five minutes: 37%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
1 0 2 0 0.00% 0.00% 0.00% 0 Chunk Manager
[Code].....
View 4 Replies
View Related
Jan 13, 2011
I've got a lot of these messages in my logs from SVC users:Code:
View 13 Replies
View Related
Dec 8, 2010
We are working on taking a port off of a switch and connecting it to a mux (TAC 900). Port is trunked to another switch in another geographic location. From wht I am being told from the engineer who handles the transmission end of things he said once our segment is physically connected the mux will crash. He supplied the error code to the vendor and they said it is crashing because of a jumbo packet in excess of 1536 bytes. Soon it will be a moot point as the hardware will be, upgraded but we need tis running NOW.
View 8 Replies
View Related
May 20, 2011
Why does DSL CKT gets bounced with delivery of large packet?
View 11 Replies
View Related
Nov 14, 2012
"how to monitoring VPN Login Session?" I want to the history of VPN User login to my VPN. How could I know?Which software can made me easy to monitoring and store those log in my SNMP Server? How to do that?
View 1 Replies
View Related
Aug 19, 2012
There are many log messages on our three 7609 routers .
Aug 16 06:17:22.664 beijing: Invalid packet (too large) length=34176
Aug 16 06:29:13.102 beijing: Invalid packet (too large) length=34176
Aug 16 06:45:23.403 beijing: Invalid packet (too large) length=34176
Aug 16 16:46:17.245 beijing: Invalid packet (too large) length=34176
Aug 16 16:46:26.257 beijing: Invalid packet (too large) length=34176
Aug 16 17:15:30.621 beijing: Invalid packet (too large) length=34176
Aug 16 17:54:51.775 beijing: Invalid packet (too large) length=34176
[code]....
View 1 Replies
View Related
Dec 12, 2012
i am implementing tcp as per rfc 793, i have one doubt, while sending first packet, if that packet lost means, tcp will wait for RTO and retransmit the first packet, and after got the ack for first packet, then only it will send second packet or without getting the ack for the first packet it will send second packet.
View 7 Replies
View Related
Apr 18, 2012
My workplace has a UC-540 attached to a cable modem, attached to the world wide web.
When we make VOIP outbound calls through the standard ISP, there is no auditory packet loss sympton; however, when we make calls to out sister branch through our VPN, we experience auditory packet loss symptoms.
I would think the VPN should only be affecting the encapsulation of the data. To my understanding the VPN packets and non-vpn packets all hit the router at the same time, and transport over the web in the same manner. Why would there be packet loss over only the VPN??
--Regarding QoS, if a standard layer 3 device receives a VOIP packet encapsulated in a VPN, do the QoS bits in the VOIP packet get acknowledged, or are they hidden by the VPN encapsulation?
View 8 Replies
View Related
Mar 29, 2012
My ping is 35ms my DLS at 45.6 Mbps and my Upload is 4.51 Mbps. My Problem is that i am losing about 60 to 90 percent of the packets on a pingtest.net.
View 1 Replies
View Related
Aug 10, 2011
For about the past 2 or 3 months, I have been experiencing outbound packet loss at about the same time every evening. That timeframe is about 7 PM - 10 PM. This is most noticeable on Teamspeak 3 because of the voice disruption that other users report to me.
View 1 Replies
View Related
Feb 19, 2013
I have recently switch internet to Time Warner. Since the day I got it, i have experienced random packet losses of 100%. I have called time warner and they are going to send a tech out. But i would like to know more about this before he comes. I have replaced the modem with a brand new one. Surfboard SB5101N from the one i was leasing from them. They both do the same thing. I have made sure all my Drivers are up to date. I have replaced the coax cable and Ethernet cable and ran my Anti Virus and Spyware program. It does it more during online game, I have reinstalled the game and was having no problems with the ATT Dsl i had before this.
View 14 Replies
View Related
Dec 13, 2012
I'm having an issue with packet loss during the same time every day at 12:20PM. I checked scheduled tasks, ran wireshark, made a static ARP entry, and ran ping tests. The ping tests show packet loss only when pinging 1 DB server to 1 App server. When the packet loss happens everyone on the network connected to the DB gets kicked out of the DB. They are eventually able to reconnect but its annoying that everyday at 12:20pm they get kicked out. Ping tests from the DB to the Firewall stay constant. But when I ping from the App server to the DB it loses connection at 12:20pm and when i'm remoted into the DB server i get kicked out as well. It's like at 12:20pm the DB server stops incoming connections for some reason.
View 7 Replies
View Related
Feb 12, 2013
When I ping my video streaming host's IP address (the IP that they gave me where I can view my IP web camera's video stream), I get anywhere from 0% to 8% packet loss at various times of the day. They're claiming that there's no problem, that this is because this is a router and it's dropping ping packets due to "ping priority giving preference to more important network traffic."
View 7 Replies
View Related
Oct 27, 2011
I had all kinds of packet loss and I was ofcourse suspecting my ISP. But then I tested pinging my internal interface and found that it has packet loss as well. I have about 10% packetloss to my interface with 192.168.0.254, I have the same thing from several different inside hosts. My inside rule is the implicit one, any, any. service IP.In the log I can see a teardown and build of the icmp whenever the packet loss accour.There is no packet loss pinging the outside interface from the internet.
View 3 Replies
View Related
Nov 21, 2011
I am pinging a host from Nexus 7K. I'm losing every 200th packet when I'm pinging the end host. I don't see any issue with network connection.
View 2 Replies
View Related
Jun 28, 2011
I´m having a problem/issue with my CSM. I have a WS-X6066-SLB-APC - Version 4.2(1), installed on a 6500, and for a while now whenever I ping the VIPs (vservers) I detect some packet loss (In 10.000 ping packets, I loose around 1%), and higher response times; If I ping the reals I see no issues, only with the L3 behind the CSM.
View 11 Replies
View Related
Mar 3, 2011
3 days ago it worked just fine but not anymore I've run a packet loss test and the result is 100% loss. I don't know why. The internet is really slow, it is unusual. I'm using wireless network. Oh, I'm using windows XP SP3 (laptop) I am not really good at computer and I'm wondering if this problem is caused by virus, malware of something like that.
View 10 Replies
View Related
Apr 5, 2012
I have a Windows 7 desktop (so it's NOT wireless) that is having problems with packet loss. Now, the modem is fine, I've tested 'pingtest' on some laptops and the packet loss is very minimal. I've tried reinstalling the drivers for the LAN controller, using a different ethernet cable, using the 'winsock' reset command, and I have no luck. This does effect upload times on YouTube, to where a minute long video takes an hour.
View 14 Replies
View Related
Dec 15, 2011
I started using Windows 7, on two different computers. I get pretty bad lag spikes while using Skype and playing online games. They occur about once per minute and last maybe one second. There is a "Network Throttling" fix floating around the internet which I have tried, to no avail. I don't know much more about computers than a basic understanding, and am completely new to Win7.
View 14 Replies
View Related
Nov 17, 2012
Pinging 98.137.149.56 and had 100% packet loss; this was suggested in another thread. LAN connected at 100 Mbps BUT cannot access Internet! Windows XP HP desktop; Belkin N Router; Optimum Cablevision - Modem Scientic Atlanta "Webstar"
I am using my iPhone to access Internet.
View 10 Replies
View Related
