Cisco VPN :: ASA 5505 Ipsec Vpn Connection Fail?
May 23, 2011
I am trying to configure a Cisco ASA 5505 for Remote Clients.I am using ASDM interface and used the startup and ipsec wizards for my configuration but im hitting a stumbling block.For the last 2 days i have tried a number of configuration changes in attempt to make this work but failed, so i have done a factory reset and gone through the wizards again, so i have a clean configuration. Currently i have a Static Public IP Address 81.137.x.x and i am using a Netgear ADSL router, which is forwarding VPN traffic (UDP 500) to 192.168.171.35 (the wan port on the ASA 5505).The Cisco ASA has a default address of 192.168.1.1 I am using Cisco Client 5.0.06.0160.I have configured the client to use Group Authentication with the same credentials as setup through the wizard and im using Transparent Tunneling IPSec over UDP.I have attached 2 documents running_config.txt - which is shows the current ASA configuration Log-View.txt - showing error messages displayed in the real-time log viewer when i try to connect from the remote client.Im not sure whether i need to do any additional configurations for my setup other than simply run the wizards.
View 3 Replies
ADVERTISEMENT
Mar 3, 2012
This is for an ASA 5505. I am trying to configure an AnyConnect and IPSec VPN connection and I think it's almost there but not quite yet. When I login from an outside network it gives me the following error for the SSL AnyConnect "The VPN client was unable to setup IP filtering" and "Secure VPN connection terminated by peer" for the IPSec. I previously had this working since Oct, but I was trying to modify it a little to accept LT2P for native Android VPN clients and that messed up everything that I had working perfectly. I checked everything as best as I could to try and match the previous settings but still can't get the darn thing to work. I am trying to also do Hairpinning, I want all VPN traffic to pass through this router... remote LAN and Internet traffic for times when I am at unfamiliar wifi hotspots and need to check email securely. I have included my running config. I also need to configure the ASA to accept native Android VPN connections. I read the most popular thread that worked for a few users but while doing those modifications that is where everything went downhill. T
: Saved
:
ASA Version 8.4(2)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
View 2 Replies
View Related
Nov 20, 2011
I am now going to configure IPSec VPN connection for Cisco ASA 5505 (Version 8.4)
View 3 Replies
View Related
Jul 23, 2012
The setup is a S2S VPN with failover to 3G HWIC in a Cisco 1941 however the IPSEC tunnel needs to remain up through 3G if ADSL fails.The failover works ok, however when plugging ADSL back in, the - "sh crypto session" shows both dialer 0, and dialer 1 with the crypto map session to the other side of the VPN and either side is now not pingable.The NoIP DDNS updater client runs on a server in the network and all IP resolution to host1,host2 works ok (other side of VPN is Cisco 1921 with ADSL HWIC and 3G HWIC). [code]
View 5 Replies
View Related
Aug 8, 2011
im drawing a blank trying to setup a site to site connection with a 5505 ASA using ipsec and isakmp.i have the pre shared key as well as the external address of the other end of the tunnel but do not remember what the commands are to setup the crypto map and isakmp.
View 7 Replies
View Related
May 13, 2012
I have configured Site-to-Site IPSec VPN and it works. Our clients have access to inside network and Internet ("hairpinning").How can I configure access to Internet on remote networks clients if VPN tunnel fail?Remote devices is ASA5505 and Cisco 861.When VPN works i have access to Internet over central office gateway.In case when VPN fail i need still have access to Internet over local (remote device) gateway.
View 2 Replies
View Related
Sep 12, 2012
We have two ASA 5500 series Firewalls running 8.4(1). One in New York, another in Atlanta.They are configured identically for simple IPSecV1 remote access for clients. Authentication is performed by an Radius server local to each site.
There are multiple IPSec Site-to-Site tunnels on these ASA's as well but those are not affected by the issues we're having.First, let me start with the famous last words, NOTHING WAS CHANGED.
All of a sudden, we were getting reports of remote users to the Atlanta ASA timing out when trying to bring up the tunnel. They would get prompted for their ID/Password, then nothing until it times out.Sames users going to the NY ASA are fine.After extensive troubleshooting, here is what I've discovered. Remote clients will authenticate fine to the Atlanta Firewall ONLY IF THEY ARE USING A WIRED CONNECTION.
If they are using the wireless adapter for their client machine, they will get stuck trying to login to Atlanta.These same clients will get into the New York ASA with no problems using wired or wireless connections.Windows 7 clients use the Shrewsoft VPN client and Mac clients use the Cisco VPN client. They BOTH BEHAVE the same way and fail to connect to the Atlanta ASA if they use their wireless adapter to initiate the connection.
Using myself as an example.
1. On my home Win 7 laptop using wireless, I can connect to the NY ASA with no issues.
2. The same creditials USED to work for Atlanta as well but have now stopped working. I get stuck until it times out.
3. I run a wire from my laptop to the FiOS router, then try again using the same credentials to Atlanta and I get RIGHT IN.
This makes absolutely no sense to me. Why would the far end of the cloud care if I have a wired or wireless network adapter? I should just be an IP address right? Again, this is beyond my scope of knowledge.We've rebuilt and moved the Radius server to another host in Atlanta in our attempts to troubleshoot to no avail. We've also rebooted the Atlanta Firewall and nothing changed.
We've tried all sorts of remote client combinations. Wireless Internet access points from different carriers (Clear, Verizon, Sprint) all exhibit the same behavior. Once I plug the laptops into a wired connection, BAM, they work connecting to Atlanta. The New York ASA is fine for wired and wireless connections. Same with some other remote office locations that we have.
Below I've detailed the syslog sequence on the Atlanta ASA for both a working wired remote connection and a failed wireless connection. At first we thought the AAA/Radius server was rejecting us but is shows the same reject message for the working connection. Again, both MAC and Windows clients show the same sequence.Where the connection fails is the "IKE Phase 1" process.
-------------------------------------------------------------------------------------------------------------------------
WORKING CONNECTION
-------------------------------------------------------------------------------------------------------------------------
%ASA-6-713172: Automatic NAT Detection Status: Remote end is|is not behind a NAT device This end is|is not behind a NAT device
NAT-Traversal auto-detected NAT.
%ASA-6-113004: AAA user aaa_type Successful: server = server_IP_address, User = user
%ASA-6-113005: AAA user authentication Rejected: reason = string: server = server_IP_address, User = user
[code]...
View 1 Replies
View Related
Nov 21, 2010
Does my device not support enough encryption to get ASDM/SSL/HTTP working?
First time I've ever seen this...:
%ASA-7-609001: Built local-host inside:192.168.1.10 %ASA-7-609001: Built local-host identity:192.168.1.1 %ASA-6-302013: Built inbound TCP connection 13 for inside:192.168.1.10/61194 (192.168.1.10/61194) to identity:192.168.1.1/443 (192.168.1.1/443) %ASA-6-725001: Starting SSL handshake with client inside:192.168.1.10/61194 for TLSv1 session. %ASA-7-725010: Device supports the following 1 cipher(s). %ASA-7-725011: Cipher[1] : DES-CBC-SHA %ASA-7-725008: SSL client inside:192.168.1.10/61194 proposes the following 11 cipher(s). %ASA-7-725011: Cipher[1] : DHE-DSS-AES256-SHA %ASA-7-725011: Cipher[2] : AES256-SHA %ASA-7-725011: Cipher[3] : DHE-RSA-AES256-SHA %ASA-7-725011: Cipher[4] : DHE-RSA-AES128-SHA %ASA-7-725011: Cipher[5] : DHE-DSS-AES128-SHA %ASA-7-725011: Cipher[6] : RC4-MD5 %ASA-7-725011: Cipher[7] : RC4-SHA %ASA-7-725011: Cipher[8] : AES128-SHA %ASA-7-725011: Cipher[9] : EDH-RSA-DES-CBC3-SHA %ASA-7-725011: Cipher[10] : EDH-DSS-DES-CBC3-SHA %ASA-7-725011: Cipher[11] : DES-CBC3-SHA %ASA-7-725014: SSL lib error. Function: SSL3_GET_CLIENT_HELLO Reason: no shared cipher %ASA-6-302014: Teardown TCP connection 13 for inside:192.168.1.10/61194 to identity:192.168.1.1/443 duration 0:00:00 bytes 7 TCP Reset by appliance %ASA-7-609002: Teardown local-host inside:192.168.1.10 duration 0:00:00 %ASA-7-609002: Teardown local-host identity:192.168.1.1 duration 0:00:00
View 7 Replies
View Related
Feb 22, 2012
We have two Cisco 2960 TT-L switches. I'd like to reduce single points of failure and have dual servers for most tasks. For example, two firewall servers and two web servers. Should one server fail the other will act as a failover.I'd like to extend the redundancy to the switches, and am thinking of connecting one web server to one switch, and one to the other. In the event a switch failed a set of servers would still run, and be able to talk to each other.I'd like to run two VLANs, one for the LAN, and one of the WAN, and connect the two VLANs on each of the switches with the associated VLAN on the other switch.
View 3 Replies
View Related
May 18, 2011
my computer cannot access Internet at all. It finds all the wireless routers and can connect to them, but says that the router cannot access Internet. However, it can. All other devices connected to the router have full Internet access. I've tries rebooting computer, rebooting router, reconnecting to router, reinstalling wireless Internet driver, but still nothing
View 4 Replies
View Related
May 29, 2011
We have Cisco ASA 5505 and an internal user (behind NAT) needs to connect via VPN to an external company. I just cannot get this to work. I have enabled IPsec Pass Through from ASDM Configuration --> Firewall --> Service Policy Rules --> Edit Service Policy Rule --> Rule Actions --> tapped IPsec Pass Through I have tried to find some info from the log but all i get is this message: IP = [remote gateway ip] Invalid Packet Detected!"I cant find anything that is blocked from the log.
View 2 Replies
View Related
Jun 16, 2012
virus update conection fail how i solve it in windows8
View 1 Replies
View Related
Mar 9, 2011
On an ASA 5505 with the proper licenses running version 8.3, which would you consider the more resource intensive for the ASA, IPSec VPN or an SSL VPN with a portal?
The connections through the firewall would be the same so I am curious how adding the different types of VPN will affect the CPU and overall ability of the ASA to function.
View 2 Replies
View Related
May 2, 2012
I am trying to replace a 1751 IPSec VPN that connects a single LAN behind the 1751 to ~45 remote networks behind a single peer. There are a small number of workstations (~50) and low throughput (< 1MBps) across this VPN, the biggest trouble is the number of remote networks needed.
I have tried to connect an ASA5505 Security Plus in place of the 1751 and am able to get Phase 1 and Phase 2 up, except I don't get all of my ipsec sa's and can only pass traffic to some of the remote networks. Does the 25 IPSec limit apply to multiple sa's one one peer, I've only ever seen it spoken of as a 25 peer limit?
View 4 Replies
View Related
May 6, 2012
I have setup a ASA and everything but ipsec seems to be working. I was able to use the clientless ssl but I need ipsec working. I'm at a loss. config is a little sloppy and i will be cleaning it up but would like to get this working first.
Cisco Systems VPN Client Version 5.0.07.0290
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
[Code].....
View 3 Replies
View Related
Oct 3, 2011
I have Cisco ASA 5505 and i want to create vpn remote access ...l
so i created and connected to the vpn ...my problem is to reach my Local connection of 192.168.1.0 /24 i put the WAN Connection in the FA0/0 and put my LOCAL AREA CONNECITON into FA0/1 .. so how i can route or translate my connection , and using cisco ASDM 6.1 in GUI ,,,
View 1 Replies
View Related
Mar 19, 2013
I am trying to configure an IPSEC vpn on an ASA5505 I setup an SSL vpn and it works fine, I can browse to the https: address log in and connnect to servers However when I try to setup the ipsec client access vpn it will not connect and I am getting the errors below I used the wizard for the initial configuration Looks like the inital IKE is being blocked or dropped?
%ASA-7-710005: UDP request discarded from my external IP/35781 to external:ASA-external/500
%ASA-7-710005: UDP request discarded from my external IP/35781 to external:ASA-external/137
View 10 Replies
View Related
Aug 22, 2011
I´m getting a dynamic public IP from my provider and what I´m trying to do is to establish a remote vpn tunnnel using IPSec which I achieve but every time the sessions resets or the ASA 5505 resets I get a new public IP and I need to put the new IP on the remote client so I can establish the vpn... How can I establish an ipsec vpn using DNS? For this scenario the remote vpn client is a vpn phone but it could be for any vpn client.
Private IP Public IP Private IP
PBX ---- (LAN) ---- ASA 5505 ---( Internet ) --- Remote Site ( Router ) --- (LAN) -- VPN Phone
View 3 Replies
View Related
May 7, 2012
I have a site to site IPSec tunnel setup and operational but periodically the remote site goes down, because of a somewhat reliable internet connection. The only way to get the tunnel to re-establish is to go to the remote site and simply issue a ping from a workstation on the remote network. We were having this same issue with a Cisco PIX 506E but decided to upgrade the hardware and see if that resolve the issue. It ran for well over a year and our assumtions was that the issue was resolved. I was looking in the direction of the security-association lifetime but if we power cycle the unit, I would expect that it would kill the SA but even after power cycling, the VPN does not come up automatically.
View 1 Replies
View Related
Mar 2, 2012
Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get errors when i run the debug crypto isakmp
View 1 Replies
View Related
Dec 14, 2012
I would like to know if I have only using IKEV2 to connect site to site VPN with Cisco 5505 device to connect few site. Which encryption method is better to choose with faster and stable IPsec encryption proposal,AES256, AES192, AES, 3DES, DES ?? which one is the best in IKEV2 site to site VPN tunnel?
View 4 Replies
View Related
Nov 18, 2011
I configured an IPSec VPN tunnel between two ASA 5505 firewalls. I would like to make sure that the IPSec tunnel (hence the security association) is permanent and do not drop due to idle condition.
View 2 Replies
View Related
Apr 5, 2012
I just made a VPN on my ASA 5505 at home, I can connect successfully to it, but I can't contact anything in the network, nothing respond to ping or to anything else (include the ASA inside IP).
View 3 Replies
View Related
Sep 5, 2011
I have two sites with identical asa 5505's and each has the dual wan/ISP links and are set for failover using sla monitor tracking. I would like to create a vpn between these two sites that stays active regardless of which ISP link is online. Do I simply make two crytpo map statements10 and a 20 inside each of the asa's to each of the other ASA's STATIC PUBLIC IP's? [code]
View 6 Replies
View Related
Mar 19, 2011
I have a Site to Site IPSEC VPN Tunnel created with ASDM wizard.
Cisco ASA-5505
Peer A: x.x.x.x
Lan A: 192.168.0.0 255.255.255.0
Fortinet FortiGate-50b
Peer B: y.y.y.y
Lan B: 192.168.23.0 255.255.255.0
I start traffic from LAN B with a ping (or telnet it doesn't matter) that receive no reply but tunnel goes up fine.
"show isakmp sa" seems ok (says "State : MM_ACTIVE")
"show ipsec sa" seems ok but all #pkts are zero
try ftp, telnet from LAN B to LAN A systems but no one work. "show ipsec sa" all #pkts are zero As soon as I generate traffic from LAN A to LAN B these works (with tunnel already up) also traffic from LAN B to LAN A works.Obviously if I end VPN and start tunnel making traffic from LAN A all work fine bidirectionally, LAN A reach LAN B and LAN B reach LAN A.No msg logged in either two appliance.
Seems a very strange problem because seems not related to Phase1 or Phase2 already established.Traffic (routing ?) start works only after at least one packet goes from LAN A to LAN B.No msg logged in either two appliance.Problems begun in ASA version 8.0(4) ASDM version 6.1(3) and remain/continue after upgrade to ASA Version 8.4(1) ASDM version 6.4(1).
View 1 Replies
View Related
Aug 3, 2011
I'm trying to connect two ASA 5505s for a IPSec L2L VPN. They can connect, but not pass traffic from the AnyConnect subnet. I've added the config from ASA-2, with the LAN subnet of 192.168.138.0 and a subnet of 192.168.238.0 for AnyConnect client.
I'm trying to get the AnyConnect Clients access to the 192.168.137.0 LAN behind ASA-1 at 1.1.1.1. Having both 192.168.238.0 and 192.168.138.0 both access 192.168.137.0 is acceptable.
There's probably a lot of cruft in this config, as I've been reading all over forums and docs without much success.
:
ASA Version 8.2(1)
!
hostname asa-wal
names
name 192.168.238.0 anyconnect-vpn
!
interface Vlan1
nameif inside
[code]....
View 7 Replies
View Related
Feb 10, 2011
Having a problem getting an ipsec tunnel to work between 2 asa 5505. This in one of the two configs.
Result of the command: "show run"
: Saved:ASA Version 8.3(2) !hostname 20Pullmandomain-name skeincenable password IKxxneNMTRgDw/Xd encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 172.16.1.70 255.255.255.0 !interface Vlan2nameif outsidesecurity-level 0ip [Code]...
View 1 Replies
View Related
Sep 27, 2012
A customer has a 5505. According to the datasheet the limit of IPSEC sessions is 25 and the limit of anyconnect sessions is 25. Does that mean I can have 25 IPSEC tunnels and 25 Anyconnect tunnels at the same time? The customer needs at least 50 concurrent tunnels on his ASA. Am I understanding it correctly?
I was thinking the customer could pay for the anyconnect essentials license and connect his anyconnect clients to the ASA. Is that a good option to get the 50 concurrent clients connected?
View 1 Replies
View Related
Feb 22, 2013
Region : China
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :
tried to run the easy setup assistant but failed the connection test. The WLAN indicator did not flash or light up, don't know if that is the problem.
Have checked the cables and they are working fine. As this router is 3 yrs old, should I get a new one? Does it appear to be a hardware problem?
View 7 Replies
View Related
May 12, 2013
I'm having trouble setting up a second IPSec VPN tunnel on my Cisco ASA 5505 to another office. I was able to setup the first one with no problem through the ASDM, but have not been able to get the second one up.The IPSec tunnel is connecting to a WRVS4400N router at the other office. I tried debugging crypto isakmp, and crypto ipsec, but I'm getting nothing. Below is the config. Does something look wrong on my end? I also attached a screenshot of the parameters setup on the remote router.
View 7 Replies
View Related
Jan 27, 2013
Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get these errors when i run the debug crypto isakmp.
View 6 Replies
View Related
Jun 19, 2012
I have 2 ipsec tunnel active on ASA5505 (secplus license).I would like to activate sslvpn also. Is it possible or there are issues in keeping active both services?
View 3 Replies
View Related
Dec 20, 2011
I have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside:192.168.150.1/49562 to outside:213.199.181.90/80 duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.
View 4 Replies
View Related
