Cisco VPN :: ASA 5510 / AnyConnect Secure Mobility Client Selecting Wrong
Feb 27, 2012
Here is the pertinent information first...
Windows 7
Cisco AnyConnect SecureMobility Client 3.0.4235
Cisco ASA 5510 firewall 8.2
The problem is.....When I log in, the client does its start-up bit, and then displays a "This certificate is intended for the following purpose(s):" message. If I decline the certificate, it gives me the error message shown in the image, but I can otherwise continue and establish my VPNs with no problem.
Unfortunately, the certificate it selects has nothing to do with my organization ( in fact, the certificate is for "*.whitepages.com" - see images). To make matters worse, I can not find this referenced certificate anywhere under my user context in Windows.
I have tried removing, rebooting, and re-installing - it does no good.How do I force the client to stop using this incorrect certificate, and to at least use one that belongs to my organization?
View 7 Replies
ADVERTISEMENT
Nov 11, 2012
We currently have an ASA 5505 Firewall with VPN services configured. The system is running ASA Version 9.0.0 and ADSDM 7.0.2. I installed the "Cisco AnyConnect Sercure Mobility Client" Version 3.1.01065 on my Windows 7 Ultimate PC. When I try to connect to my VPN service I ge the following message:
Security Warning: Untrusted VPN Server Certificate! AnyConnect cannot verify the VPN server: XXX.XXX.XX.XX
-Certifiate does not match the server name
-Certificate is from an untrusted source.
-Certificate is not identified for this purpose.
Without purchasing a certificate from a 3rd Party vendor, is it possible to register a "Self" generated Certificate to get rid of this message? If so are there any "Detailed" (e.g., simplified or not in Cisco-eeze language) instructions on how to setup the Firewall to "push" the certificate to the VPN client so the message doesn't come up for the user?
View 5 Replies
View Related
Mar 1, 2011
I need to activate AnyConnect SecureMobility client on an IPAD. I have an ASA with the below feature licenses:
[code]...
This platform has an ASA 5520 VPN Plus license
As I've understood that I need the ASA-AC-M-5520 license for each IPAD used but they mentioned that we need also the Essential or premium license to be activated on the ASA as well. As shown above, I have the "VPN Plus license" activated on the firewall.
View 1 Replies
View Related
Jun 15, 2012
Will the RV042 work with theAnyConnect Secure Mobility Client app? If so, is there and app note available? If not, which routers wil work with this app?
View 5 Replies
View Related
Jul 30, 2012
Windows clients work fine. When loaced from safari in Mac OS, it also works fine. -- If I browse to the url, like vpn.xxx.com/profilename, I can login and anyconnect will start and connect automatically. Only when run from applications > Cisco > Cisco Anyconnect Secure Mobility Client, I will get this failure. Is this a configuration issue?
View 1 Replies
View Related
Jun 3, 2013
We are using an ASA 5520, running 8.4(3). We have users running the AnyConnect Secure Mobility Client 3.1.02026. I have the AnyConnect connection profile configured to authenticate users using LDAP over SSL. I enabled the password management and am able to get password change prompts to appear in the AnyConnect client. However, new passwords are rejected and changing passwords through that prompt does not work. I'm not sure what the cause of the problem is, since LDAP over SSL is enabled and working, which is required for the password management feature
View 9 Replies
View Related
Sep 10, 2012
IOS SSL VPN fails to connect, CSCtx38806.pdf file for more info...There is bug with router IOS. if anyone cannot connect to router webvpn service via 3.1.00495 anyconnect client and it is giving you certificate error. you would be only able to connect via SSL web page not via client. Then please upgrade your IOS to latest version. IOS SSL VPN fails to connect after microsoft security update KB2585542 Workaround: Use rc4, w which is a less secure encryption option. If this meets your security needs, then you may use it as follows:
webvpn gatew ay gatew ay name
ssl encryption rc4-md5
I have anyconnect-win-2.5.6005-k9.pkg anyconnect installed on router. When I try to connect with webvpn from client on machine 2.5.6005 anyconnect or latest secure mobility client 00495. it gives me certificate error. it doesn’t connect me with IOS web VPN. I can connect via SSL web page. There is bug please upgrade your IOS to latest version.
View 2 Replies
View Related
Oct 24, 2012
I recently got my hands on the latest Secure Mobility VPN v3.1.01 client. We are upgrading from the old anyconnect 2.4 client so there are many changes that are catching us by surprise. The biggest issue I have right now is that the new Mobility VPN launches automatically when a user signs into a machine. We would like to disable that automatic connection/launch feature. With the old 2.4 client we simply disabled the AnyConnect Service in Services.msc by default and started it up when a user was ready to connect.
View 5 Replies
View Related
Jun 14, 2011
I am having a problem configuring SCEP for my secure mobility client. I have created a connection profile to allow certificate requests but when I fill in the step-forwarding-url field I get an error. The CA we are using is an internal MS CA with SCEP already enabled. This has been configured for a long time with our current Cisco VPN client using certificate authentication. The ASA is running 8.4.1.Here is the error I get when I try to enter the command into the group policy associated with my certificate enrollment connection profile: group-policy SSLGP attributes. url...
View 6 Replies
View Related
Sep 9, 2012
I'm running Cicso AnyConnect Secure Mobility Client v3.0.07059 for work. Attached is a sceenshot of my network connections. I'm currently hardwired on my network connection and the Cisco VPN is a virtual adapter but is shows "network cable unplugged."
View 12 Replies
View Related
Jul 27, 2011
Using AnyConnect Secure Mobility Client, logging into ASA5540. After I put my credentials in, I get the banner message (from group policies). After I accept that, I get another pop message stating:It looks like a pre-set message. Where can I disable and/or edit this message?
View 4 Replies
View Related
Jan 13, 2013
I am trying to setup an ASA 5510 for anyconnect. I was using the document: [URL] which looks the same as:[URL] I get to step 3:Click Configuration, and then click Remote Access VPN.Expand Network (Client) Access, and then choose SSL VPN Connection Profiles.
There is no SSL VPN Connection Profiles.It all goes downhill after that.Show version shows:
Cisco Adaptive Security Appliance Software Version 8.2(2)
Device Manager Version 6.4(5)206
Compiled on Mon 11-Jan-10 14:19 by builders
System image file is "disk0:/asa822-k8.bin"
View 1 Replies
View Related
May 30, 2012
Two ASA-5510 in Failover.I already have several VPN with Cisco VPN client.Now I have the requirement to activate new AnyConnect VPN, witch "migrate" the old VPN to.The customer does not want to purchase licenses for SSL VPN, and then I have to configure the AnyConnect on IPSEC.I read that AnyConnect over IPSEC don't need SSL license - is this right?
Client version 2.5.3055.On the ASA with 8.4.2 (ASDM 6.4.7) I don't find HOW to configure the IPSEC for AnyConnect, while a friend of mine with 8.4.3 did it.Is there a way to configure using CLI, or is an item of the 8.4.2 ?When I try to connect, after authenticating Username & Password, I receive (on the client) a message "AnyConnect was not able to establish a connection to the specified secure gateway." On the "Real Time Log Viewer" I see only SSL, never IKE nor IPSEC
View 1 Replies
View Related
Aug 5, 2012
I'm on a Mac connecting to a Cisco ASA 5510 with AnyConnect VPN client.
The connection is established and it works for 15-30 seconds, then the connection drops. AnyConnect will reconnect, and then it works fine.
I noticed in the logs that it reconnects with a smaller packet size.
View 1 Replies
View Related
Dec 11, 2012
I have configured anyconnect for phone at ASA 5510. Phone can connect to Corporate network through VPN from outside without any problem.
If I connect laptop to PC port at phone, I can run anyconnect client at pc and get vpn connection through phone. Can I get VPN connection for laptop through phone without running anyconnect client at the laptop i.e. can phone share VPN connection for laptop at PC port?
View 1 Replies
View Related
Apr 17, 2013
I am having anyconnect version 3.1.03103, windows7 & 8 and asa 5520 (8.4). I have gone through alot of work to solve this issue but it not hapening. On clientless ssl vpn it prompts me for manual certificate selection but on anyconnect client it is not. profile configuration is mentioned below. In the highlighted line below i have changed UserControllable="true" still no results.
<?xml version="1.0" encoding="UTF-8"?>
-<AnyConnectProfile xsi:schemaLocation="[URL]" xmlns:xsi="[URL]" xmlns="[URL]">-<ClientInitialization>
[Code]....
View 0 Replies
View Related
Jul 25, 2012
I have the problem, that when I want to connect to the VPN Gateway (ASA 5510) with the AnyConnect Client 3.0 I will get the error "Failed to load preferences" when I try to connect via the SSL Portal of the ASA, everthing works fine... I have tried to reinstall the Client - without any success.
View 3 Replies
View Related
Sep 20, 2011
ASA 5510 configuration for Csco anyconnect vpn client. Currently ASA is configured for self-signed certificate acces thru anyconnect ssl vpn. So the cert is being generated with every connection (of my understanding, I haven't found any identity certificate on the current configuration, at least on ASDM). Now I need to use a certificate from our local windows CA that we have at the office. I.e. self-signed certs should be changed with another one issued by our local office authority.
1. Generated new rsa key pair on the ASA
2. Generated CSR from identity certificates
3. Applied CSR to the windows CA and generated the certificate
Now I need to understand what is going to happen after I install this certificate on the ASA's identity certificates and apply it to outside interface. Is there anything to be done on the users side to use new certificate? Do they need to download and install the root certificate from the same CA? Do i need to have the root certificate installed on the ASA or identity is enough?
View 1 Replies
View Related
Jan 18, 2012
We have 2 ASA 5510's running in a Active/Standby configuration. It appears that most of the changes we make on the active unit are replicated to the standby unit. However, there are 3 AnyConnect Client Profiles on the active unit and none of them show up on the standby, the standby has no AnyConnect Profiles. We also have 1 OnConnect script on the active unit and it does not appear on the standby unit either.
I was under the assumption that all config items on the active unit would replicate to the standby. Is this not correct? Do I need to do something extra to get everything replicated? Are there other items that do not replicate?
View 3 Replies
View Related
Jan 2, 2012
So, I've set up Anyconnect client access to an ASA-5510.
I've got a handful of interfaces, which contain hosts that should be accesible to anyconnect clients. I'm unable to reach addresses on a specific network, due to what packet-tracer claims is an implicit deny, though I'm unsure where to apply an access-list in this case.
fw1# show nameif
Interface Name Security
Ethernet0/0.205 SECURE 90
[Code].....
View 7 Replies
View Related
Jul 19, 2012
I have problem I want a remote opzeten with my 800 router I used AnyConnect Secure Mobility Client can not connect but you know someone that can do
View 0 Replies
View Related
Sep 15, 2011
On my setup SSLVPN tunnel fails with AnyConnect 3.0.3050 or above releases to UC520 platform running IOS(151-2.T4).
3.0.4235
3.0.3054
3.0.3050
Connection succeeds with all other versions below 3.0.3050. I’m using standalone client on my PC (tried Win7 and XP).I added my server to the trusted sites list on my IE.
When I tried with anyconnect-win-3.0.3050-k9.pkg which was installed on UC520, the client gets installed successfully and connection was established.When I disconnect the session (had an option to keep the client on PC) and tried to connect back, the connection failed after I have accepted the certificate.I don't see any webvpn debugs on the UC520.
View 1 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Nov 6, 2012
I have been successfully able to setup Cisco AnyConnect VPN on ASA 5520 with 8.4 code. I have set it to authenticate against the RADIUS Server (Microsoft Windows 2008 NPS server). I have noticed one thing, on the server under "Constraints and Authentication Method". I picked MS-CHAP-v2, but it is considered Less secure authentication methods. I can click on Add and choose other Authentication methods like Smart Card or other Certificate, PEAP, EAP-MSCHAP v2. I picked PEAP but then the VPN does not work.
So first of all does it really matter if I just leave it to MS-CHAP-v2? Because from my understanding is that AnyConnect will authenticate to ASA and then ASA in the backend talks to the RADIUS server so from a security stand point this scenario shouldn't it be sufficient as no un encrypted or less secure information is available to the outside world? Secondly is there any documentation on using PEAP with Cisco AnyConnect?
View 4 Replies
View Related
Jan 21, 2011
This is terminating on an ASA c5510 sec+ running 8.3(2) Client devices running XP with the same VPN client get an address from the ASA pool e.g. 10.10.50.1 with no default gateway. Users are able to connect without a problem. Windows 7 (32bit) clients with this same VPN client get this address but get a default gateway 10.10.50.2 and are unable to connect for obvious reasons.
View 7 Replies
View Related
Jan 16, 2012
I have setup the WLC to authenticate to a MS Server2008 NPS for a WPA2/AES SSID. The connection is successful, but client authentication fails for wrong EAP-type. I believe this indicates a Windows7 client issue. What is the required client setup to satisfy the MS NPS?
View 8 Replies
View Related
Sep 17, 2011
After we change the firewal from PIX515E to Fortigate311B, one notebook which installed Cisco PN client 5.0.7.440 in WIN7 64bits can not access VPN because the default gateway is not correct. For example the IP get from Ip pool is 172.28.22.10 but the default gateway IP is 172.28.22.1. ?
View 2 Replies
View Related
Sep 3, 2009
DHCP enabled with default settings. Dynamic IP range from 192.168.0.100 - 192.168.0.199.Router shows laptop with 192.168.0.199 however when I check the IP on laptop I have 192.168.100.10 and both laptops are connected on my SSID with 90% signal strenght.
View 4 Replies
View Related
Mar 29, 2012
I have 2 units Cisco WLC 5508 running software version 7.0.220 with 70 over units Cisco AP 1262N and 1242AG. Some of wireless clients having problem to get the correct IP address from the DHCP server. There are 2 units of Microsoft DHCP. Both DHCP server ip have been configured on the Interface at the WLC. The core switch also being configured with ip helper. I've attached the debug output of one of the wireless client during the problem.
View 12 Replies
View Related
Apr 8, 2011
when u use the debug cryoto isakmp 127 on the asa 5510, in order to troubleshhot remote access vpn users,to which entry r u looking in the debug to see if the user enter wrong password?
View 1 Replies
View Related
Dec 8, 2010
The organization that I worked for purchased large number of Cisco Secure Services Client Licenses for Windows XP. Now they have plans to move to Windows 7. Reading different discussions, I know that SSC ver 5.1 does not work with Windows 7. My questions are:
1) Will there be a new SSC for Windows 7? Will we be able to configure the pre-package for installation with the new SSC?
2) Can we use the existing SSC ver 5 licenses with the new SSC for Win 7?
View 4 Replies
View Related
Jul 17, 2012
I had an odd occurrence today on my network. One particular desktop running Vista could not access secure websites (httpsremoved the DHCP lease on my server (Windows 2008), let the desktop pick up a new address and all is good nowThis is a production network (domain) environment
View 3 Replies
View Related
Jan 13, 2012
VPN client 5.0.07.0410 on Windows Vista sp2 when I try to connect to my cisco 851.Secure VPN connection terminated locally by the client Reason 412 The remote peer is no longer responding.I turned on debug crypto isakmp and debug crypto ipsec no information displayed on the console.I was a lot futher before but now do not know where to turn.
View 3 Replies
View Related
