Cisco Firewall :: 5510 - AnyConnect Client Profiles Not Replicating To Standby ASA
Jan 18, 2012
We have 2 ASA 5510's running in a Active/Standby configuration. It appears that most of the changes we make on the active unit are replicated to the standby unit. However, there are 3 AnyConnect Client Profiles on the active unit and none of them show up on the standby, the standby has no AnyConnect Profiles. We also have 1 OnConnect script on the active unit and it does not appear on the standby unit either.
I was under the assumption that all config items on the active unit would replicate to the standby. Is this not correct? Do I need to do something extra to get everything replicated? Are there other items that do not replicate?
View 3 Replies
ADVERTISEMENT
Mar 3, 2010
I have an ASA running 8.2.x code with AnyConnect 2.4.x.I have both Radius and LDAP (AD) AAA available.If a user connects from a company owned laptop, I want to push down AnyConnect client ProfileA (with scripts to map drives etc...) and network ACL's set A.
If a user connects from any other computer, I want to push down AnyConnect client ProfileB (no scripts etc...) and network ACL's set B.
What I would like to do is CSD to do a machine certificate check (for presence of a cert from my private CA) and to assign a EndPoint Policy attribute (Managed on successful check or Unmanaged on failure). I can then use DAP to tailor the ACL's that get set.
It seems like the only way to handle AnyConnect client profiles is with Group-Policy. Using LDAP I can assign a user to a Group-Policy, but I have no way of determining is they are coming in from a company laptop or not when assigning the Group-Policy. DAP can not assign an AnyConnect client profile.
If at all possible, I do not users to have to pick a conenction profile or use different URL's.
View 1 Replies
View Related
Nov 9, 2011
I use a Cisco ASA 5510 with the AnyConnect VPN for remote workers. Now we want to give access to a select group of consultants who only need access to one sever and block everything else.
I was thinking this could be done by creating a separate AnyConnect Connection Profile on the ASA. From that new connection will come a new GroupPolicy with a ACL to only allow access to the one system. That GroupPolicy will point to the Radius Server looking for an account in a specific MemberOf group.
My question is - Could you explain how the ASA knows what Connection Profile to use when a user tries to authenticate? Does it automatically hunt down each Connection Profile until there is a username match via RADIUS in the Connect Profile?
View 1 Replies
View Related
Jan 2, 2012
So, I've set up Anyconnect client access to an ASA-5510.
I've got a handful of interfaces, which contain hosts that should be accesible to anyconnect clients. I'm unable to reach addresses on a specific network, due to what packet-tracer claims is an implicit deny, though I'm unsure where to apply an access-list in this case.
fw1# show nameif
Interface Name Security
Ethernet0/0.205 SECURE 90
[Code].....
View 7 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Mar 6, 2013
Our customer has purchased 2 x L-ASA-AC-E-5520= Anyconnect Essentials VPN Licenses (750 Users)Ive installed both activated licenses as per the cisco guides, I didnt get any errors on the install. I did a reload on both, they are both back up and running as active/standby but when I do a sh ver the license still shows "ASA 5520 VPN Plus License"Am I being dumb and has this worked successfully or should it not now display Anyconnect when I do a sh ver?
View 8 Replies
View Related
Aug 5, 2012
I'm on a Mac connecting to a Cisco ASA 5510 with AnyConnect VPN client.
The connection is established and it works for 15-30 seconds, then the connection drops. AnyConnect will reconnect, and then it works fine.
I noticed in the logs that it reconnects with a smaller packet size.
View 1 Replies
View Related
Dec 11, 2012
I have configured anyconnect for phone at ASA 5510. Phone can connect to Corporate network through VPN from outside without any problem.
If I connect laptop to PC port at phone, I can run anyconnect client at pc and get vpn connection through phone. Can I get VPN connection for laptop through phone without running anyconnect client at the laptop i.e. can phone share VPN connection for laptop at PC port?
View 1 Replies
View Related
Feb 15, 2012
I recently upgraded to Windows 7 in my company and the OS came bundled with Anyconnect VPN client version 2.5.
In the earlier version I used to add user profile using a .pcf file by importing it into the client to access customer LAN.
But in the Anyconnect VPN client I dint find any option to import the file. The IT support has told to edit the xml file to add it. The problem is I even after i edit the anyconnect-cert.xml with changes in host name and host address tags I am not able to start a connection. I dont knw know exactly what address must be given in Host address tag. I copied the host address from .pcf file which i used earlier.
Whether I will be able to add a user profile in this way or any correction is to be done in the whole process of adding the user profile,
View 1 Replies
View Related
Jul 25, 2012
I have the problem, that when I want to connect to the VPN Gateway (ASA 5510) with the AnyConnect Client 3.0 I will get the error "Failed to load preferences" when I try to connect via the SSL Portal of the ASA, everthing works fine... I have tried to reinstall the Client - without any success.
View 3 Replies
View Related
Sep 20, 2011
ASA 5510 configuration for Csco anyconnect vpn client. Currently ASA is configured for self-signed certificate acces thru anyconnect ssl vpn. So the cert is being generated with every connection (of my understanding, I haven't found any identity certificate on the current configuration, at least on ASDM). Now I need to use a certificate from our local windows CA that we have at the office. I.e. self-signed certs should be changed with another one issued by our local office authority.
1. Generated new rsa key pair on the ASA
2. Generated CSR from identity certificates
3. Applied CSR to the windows CA and generated the certificate
Now I need to understand what is going to happen after I install this certificate on the ASA's identity certificates and apply it to outside interface. Is there anything to be done on the users side to use new certificate? Do they need to download and install the root certificate from the same CA? Do i need to have the root certificate installed on the ASA or identity is enough?
View 1 Replies
View Related
Feb 27, 2012
Here is the pertinent information first...
Windows 7
Cisco AnyConnect SecureMobility Client 3.0.4235
Cisco ASA 5510 firewall 8.2
The problem is.....When I log in, the client does its start-up bit, and then displays a "This certificate is intended for the following purpose(s):" message. If I decline the certificate, it gives me the error message shown in the image, but I can otherwise continue and establish my VPNs with no problem.
Unfortunately, the certificate it selects has nothing to do with my organization ( in fact, the certificate is for "*.whitepages.com" - see images). To make matters worse, I can not find this referenced certificate anywhere under my user context in Windows.
I have tried removing, rebooting, and re-installing - it does no good.How do I force the client to stop using this incorrect certificate, and to at least use one that belongs to my organization?
View 7 Replies
View Related
Feb 28, 2013
Is there a way to access the asa in a failover pair that is in standby mode from the primary asa? IE I am logged into the primary asa via command line and was hoping to access the other asa from here.
View 1 Replies
View Related
Feb 13, 2012
I have 2 x 5510's in active/standby mode, things look fine until the active one needs to be failed over and I realize the standby one is dead. I never notice as the lights on the ASA look good, I only nice as I can't telnet or console onto it, how can I debug this issue?
View 1 Replies
View Related
Apr 18, 2012
i read that you need only one L-ASA5510-SEC-PL for setting up a Active/Standby Failover. I installed the license on the 1st ASA and tried to setup the failover via the ASDM wizard. It always fails, because the 2nd device can't have a 'base' license.So does this mean, i really need another license?
View 5 Replies
View Related
Jun 4, 2012
I currently have a LAN-based failover setup between two 5510s. The failover link is a crossover cable. In the current setup, if I unplug the crossover cable both units become active. From what I understood from Cisco documentation, each unit should mark the failover interface as down and there shouldn't be any failover. That's exactly how I want this setup to work.
View 5 Replies
View Related
Apr 2, 2013
I have a dual ISP, 1 primary and 1 secondary terminated on fa0 and fa2 on our ASA respectively. ASA was configured so that, when the primary fails, the secondary kicks in. [code]
It was until yesterday that we experienced downtime on the primary ISP that the secondary doesn't do the fail-over. I have to manually configure the device to use the secondary ISP. Currently, I'm looking at maybe this has something to do with the licensing.We are currently using a Base License, should we be upgrading to Security Plus?
View 10 Replies
View Related
Oct 14, 2011
I have a 5510 ASA and have been given another an told to make them active and standby. Basically the active one is working great but the second one has no config on it apart from the default one, but is the same firmware level. I guess I need a crossover cable, and what happens with the inside and outside interfaces, would they need to go into a vlan on a switch, one inside vlan where the 2 firewalls inside interface go into and another vlan for the outside? Otherwise if it failsover to the standby ASA the inside and outside interfaces wouldn't work.
View 4 Replies
View Related
Jan 25, 2012
I just added a new 5510 failover unit to an existing 5510 and when connecting my new outside interface on an Active/Standby firewall pair, i get errors messages (red x) on each port scan (monitor & syslog) although the error message indicate all ports are good...additionally the firewalls flip between active and standby non stop. I remove the new standby unit outside interface from a shared switch and everything clears up.
View 1 Replies
View Related
May 8, 2012
We have 2 ASA 5510's setup in an active, standby failover configuration. When the primary fails over to standby, the 3rd party cert does not failover to the standby ASA. The users then receive the CERT missing, invalid message and have to select yes, no to move on. This does not occur when the primary is not in failover mode. It is my understanding that failover fails over certs but in our case it does not apper to be working correctly.
View 1 Replies
View Related
Mar 22, 2011
I have three pairs of ASA5510 firewalls, each pair configured as a failover pair. When each pair boots up, even if I boot up the primary first, when they are both up and the primary/active syncs to the secondary/standby, the primary always switches to standby and the secondary thus becomes active.
What would cause this? It happens on all three pairs. Does failover look for the highest ID or IP address to determine which of the pair will be active?
View 1 Replies
View Related
Sep 19, 2011
I was wondering if it is needed to license the IPsec VPN clients in the ASA5500 firewalls...I know that you have license the SSL VPN peers (AnyConnect). I am almost sure that for the IPsec you don't have to.
View 1 Replies
View Related
Apr 3, 2011
Is there a way that i can associate one user with two VPN profiles. Now here is the scenario.Our company has bought a win 7 64 bit pc for some of the employees , so i had to create anyconnect. But the same users are also connecting via normal cisco vpn client. they will give away these old pc but for the time being my need is that both users shall connect to anyconnect profile and ipsec profile.
I tried ti to assign same profile with both ipsec and svc so that they could use single profile but anyconnect didn't work. I am having cisco ASA 5510 as VPN gateway.And How many licenses does cisco asa have by default for anyconnect users. Here is the configuration for anyconnect
group-policy Broad_Anyconnet internalgroup-policy Broad_Anyconnet attributes dns-server value 4.2.2.2 vpn-tunnel-protocol svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value Nit_Broadcast_Network_Tunn_ACL address-pools value Broadcast_AnyPool webvpn svc ask none default svc
[Code]...
View 5 Replies
View Related
Oct 29, 2012
I ve configures an asa 5505 for remote vpn with anyconnect. it works just fíne - from remote i can ping the Clients and Server inside, i can do RDP or Connect via SSH to any machine, map some volumes local and so on but: I can not connect microsoft sql server. It uses port 1433 for the first connect and establishes then a dynamic connection. So i am a Newbie - what rules or configs do i miss?
View 3 Replies
View Related
Apr 9, 2012
II have a management network 192.168.5.x and VPN network 192.168.25.x. I can ping a all my network elements except to firewall (ASA5510). The ASA has the IP 192.168.5.1. I think that the firewall has some restriction but I don't know. I have 8.2 software and any connect 3.0 and work fine. If I am in the management network (192.168.5.7), I can ping to firewall. The restrict is with the VPN network.
View 4 Replies
View Related
Jul 7, 2011
I have a vpn ssl remote access with a fw asa 5510 version 8.02. When users use any connect vpn ssl they in the Lan can access to the servers,but they can not access using ssh or telnet to inside fw asa.
aaa authentication ssh console LOCAL
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 30
View 1 Replies
View Related
Jun 5, 2011
I have this firewall working as active/standby. Everything seemed to be ok, but we noticed that confirgurations are not being replicated by saving configuration either copy run start or write. The workaround here is write standby command. Below the configs and stats, plus the show version, which is the same in both equipments:
Header 1
failover
failover lan unit primary
[Code].....
View 9 Replies
View Related
Sep 22, 2011
last night I started upgrading our ASA5520 active/standby cluster. Because of lack of memory, I stopped the upgrade process and will continue when the memory modules have arrived... Currently I'm running 8.0(5) on both nodes (Version: Ours 8.0(5), Mate 8.0(5))Whenever I use the "write standby" command on the active ASA, the passive ASA seems to drop it links for a short while. [code]
View 4 Replies
View Related
Sep 11, 2012
We are starting to deploy SSL VPN in our company and we recently purchased two ASA 5510 firewalls. I have already completed the initial configuration but I do have some inquiry on how to have it configured properly.
1. Employees and clients will access the URL
2. They will select the appropriate group on where they should login.
3. Enter credentials, etc.
4. Username/Password authentication is via RADIUS. The usernames were all created in Cisco ACS 5.3.
My challenge is, we have several clients and all their usernames were created in ACS5.3. Meaning if the configuration is just being differentiated by group settings, clientA can select the profile of clientB and still get authenticated. If that happens, they will be able to access the resources of each other. Also in the future, we will be deploying 2-Factor authentication for some of our clients.
View 4 Replies
View Related
Dec 5, 2012
Our Cisco ASA 5510 running 8.4(4)1 just started dropping packets and our AnyConnect clients are seeing horrible performance. The system is extremely slow compared to just a couple days ago.Nothing has changed on the system. I can post the configs if needed.
firewall# sho int
Interface Ethernet0/0 "outside", is up, line protocol is up
Hardware is i82546GB rev03, BW 1000 Mbps, DLY 10 usec
Full-Duplex(Full-duplex), 1000 Mbps(1000 Mbps)
Input flow control is unsupported, output flow control is off
Description: == WAN Interface ==
[code]....
I have done a "sho vpn-sessiondb detail svc" and I can see the dropped packets of the individual users, but cannot see why the packets are still dropping.how I can correct this and restore speeds?
View 1 Replies
View Related
Nov 11, 2012
I discover an issue with my CISCO ASA 5550 because I'm looking at the vlans that I have configured and some vlans on the Stand by device had not an IP address configured, checking the configuration of the failover
View 2 Replies
View Related
Aug 5, 2012
We just set up the AnyConnect SSL vpn on our ASA. I am able to establish a connection fine using the Cisco AnyConnect client. I would like to use the native Windows VPN client though if possible. What configuration changes on either the firewall or the client I would need to make for this to happen?
View 1 Replies
View Related
Mar 16, 2013
I have ASA 5510 8.4 Firewall where more than 20 Site to Site VPN Clients are configured on it. how to see the traffic for one Specific Site to Site VPN.Actually this site to site vpn is always keep dropping for every minute. I'm sure its a problem at the other end.The remaining 19 VPNS are UP and working without any problem. How to see the traffic for specific vlan.More over we dont have any syslog server in our network. Is their any chance we can check the traffic on the firewall?
View 6 Replies
View Related
