Cisco WAN :: Difference Between MWR-2941-DC And MWR-2941-DC-A?
Jun 5, 2013Any difference between these (2) mobile wireless router models?
MWR-2941-DC
MWR-2941-DC-A
I can only find mention of MWR-2941-DC-A in Cisco's product documentation.
ADVERTISEMENT
Cisco WAN :: MWR 2941 Stops Responding To Telnet
Apr 15, 2012I have two MWR 2941's in a lab environment awaiting deployment in a SAToP environment. They are both running the latest IOS, mwr2941-adviprank9-mz.151-1.MR3.bin. After being up for about 4 days they both stop responding to telnet attempts. I do not get a reject message - it just goes to a blank secreen with a flashing cursor. The only way to fix it is to reboot. I read that an older IOS had a similar bug on the MWR1941 but I cannot find anything about the 2941 having issues such as this.
View 4 Replies View RelatedCisco WAN :: Not Able To Configure Outward MEP 2941 MWR Router
Feb 3, 2011We got a new CISCO 2941 MWR router shipped with the “mwr2941-adviprank9-mz.122-33.MRA.bin” image .I am not able to configure the Ethernet service OAM(CFM) . We need to configure a outward domain and outward MEP.The system is not allowing me to configure a outward MEP. There seems to be no option to configure an outward MEP. I am successfully able to configure inward domain and inward MEP but this does not fit in our setup as we want CCM to be send outwards .
View 1 Replies View RelatedCisco WAN :: 2941 GRE Tunnel Setup ( Bridging Interfaces )
Oct 1, 2012I have two Cisco 2941's going over a IPSEC VPN. I need to push the same network over this connection. For example i need 192.168.255.0 / 25 on my side and i need to plug in a laptop on the far end 2941 with the same network. I have built GRE tunnels before and i found a configuration online to brdige interfaces over a GRE tunnel.
when i get to adding the bridging to the configuration which i will show below i get an error. Please see below. Also when i try to add the same briding command on the GRE tunnel which is needed it doesnt show the bridging command as being available. The Cisco 2941's are both using version: mwr 2941-iprank9-mz.124-20.MRb1.bin.As i stated the only end result i need is to be able to configure a path from point A and B and have the same network on each end.
Cisco WAN :: Network Control Protocol (NCP) Over PPP Support In 2941
Dec 19, 2010I am using a CISCO 2941 DC-A router,For the PPP testing.I was using GL card from the GL communications.In the case of GL card it supports this below Feature"In MLPPP Simulation, NCP can be configured to send Packets over PPP links in the bundle or on the MLPPP bundle."My query Is in the Cisco Router 2941-DC-A,Is their support for sending NCP over PPP in the case of Multilink(MLPPP).Because I found out that in the case of MLPPP the Cisco router sends NCP packets over MLPPP only. How to configure the cisco router to send NCP packets over PPP in case of MLPPP.?
View 1 Replies View RelatedCisco WAN :: CAB-E1-RJ45BNC Cable Compatible With E1 Ports On MWR 2941-DC Router
May 16, 2012I was wondering if the CAB-E1-RJ45BNC cable is supported on the E1 ports integrated in the MWR 2941-DC router?
View 3 Replies View RelatedCisco WAN :: Implementation Of Short Sequence Number Format Support In PPP Multilink Header For MWR 2941
Jun 11, 2012One of my customer has raised a new requirement for implementation of short sequence number format support in PPP multilink header for Cisco MWR 2941 E1/T1 serial interface, whereas router is supporting long sequence number format.here is the output of "debug ppp negotiation" command:-Currently in the MWR debugging logs we can see that by default MWR is sending long sequence header format as below
*Mar 13 01:32:55.438: Se0/2:0 LCP: O CONFREQ [REQsent] id 238 len 25
*Mar 13 01:32:55.438: Se0/2:0 LCP: MagicNumber 0x26CDF693 (0x050626CDF693)
*Mar 13 01:32:55.438: Se0/2:0 LCP: MRRU 1500 (0x110405DC)
*Mar 13 01:32:55.438: Se0/2:0 LCP: EndpointDisc 2 16.16.16.11 (0x1307021010100B)
*Mar 13 01:32:55.438: Se0/2:0 LCP: MultilinkHdrFmt seq long classes 2 (0x1B040202)
While as per the requirement PPP multilink header should support short sequence.
MWR configuration:
controller E1 0/2
framing NO-CRC4
clock source line
channel-group 0 timeslots 1-31
[code]....
Cisco WAN :: Difference Between A9K-RSP-4G And A9K-RSP-8G?
Oct 2, 2011Any difference between A9K-RSP-4G and A9K-RSP-8G? What is the usage for additional 4GB memory?
View 8 Replies View RelatedCisco WAN :: Difference Between 881-SEC-K9 And 881-K9?
Dec 15, 2010I need to set up a VPN connection between two branch offices and the main office (three nodes)From the specs it looks like CISCO881-K9 can do the job. What is the main difference between CISCO881-SEC-K9 and CISCO881-K9?Is Avanced IP security feature set required?
View 3 Replies View RelatedThe Key Difference Between PPP And IP?
Nov 15, 2011why PPP is being used for data transmission and why IP is being used for Video ?
Cant we send video on PPP ? what problem we would face in this case ?
Cisco :: What Is Difference Between SDN And Openflow
May 30, 2012I gather that Openflow is a type of SDN, but can't find out the differences between the definitions of the two.
View 2 Replies View RelatedCisco Wireless :: Difference Between IOS 12.4 And 15.2
Feb 12, 2013What is the main difference between IOS 12.4 and 15.2?
View 1 Replies View RelatedCisco WAN :: Difference Between Wic 1FE And Wic 4ESW
Sep 8, 2009What are different Wic-1FE Vs Wic-4ESW?
View 6 Replies View RelatedCisco WAN :: Difference Between Wic-1FE Vs Wic-4ESW
Jul 29, 2012What are different Wic-1FE Vs Wic-4ESW?
View 1 Replies View RelatedCisco Wireless :: Difference Between 802.11 A And 802.11g
Feb 26, 2012Although I know the difference between 802.11 a and 802.11 g standard but just confused about this. When both the standards have been originated from OFDM and provides maximum Data rate of 54 Mbps. They have almost similar features and the only difference is of Frequency range they work on i.e. 5 Ghz and 2.4 Ghz respectivity.If they both have so many similarities then why there are 2 different standards - a and g. Just due to the frequency bands are different ?
View 1 Replies View RelatedCisco Infrastructure :: Difference Between RPS 300 And 675
Jan 8, 2013What is the difference between RPS 300 and RPS 675?
View 3 Replies View RelatedCisco Firewall :: Difference Between ASA 825 And 841
May 25, 2011I am building 20 pairs of failover firewalls for work and I was wondering from the users of the new code 8.3 - 8.4 if there are anything to watch out for. I know NAT changes from 8.2x to the newer 8.3 - 8.4 lines but would like to hear about real world thoughts on it.
I am working on my CCIE-Security on the side and right now the lab uses 8.2 but I am a good 6 to 9 months out, so I wonder if there will be a change in the lab to 8.3 before I try to go take it, what code to load and use on the production boxes.
Cisco :: Difference Between NVRAM And Flash
Aug 15, 2011what physically distinguished NVRAM from EEPROM (flash)? What type of memory is used for "firmware"
View 1 Replies View RelatedCisco :: Difference Between Anti-virus And IPS
Mar 10, 2012If I have an updated Antivirus in my network, do you still recommend having IPS installed in my network?
View 1 Replies View RelatedDifference Between Huawei And Cisco Switch
Jun 11, 2012I have connected Huawei switch with Cisco switch using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side..
View 2 Replies View RelatedCisco Firewall :: Difference Between ASA-SM1 And FWSM
Apr 1, 2013Can any1 tell me wat is the difference between ASA-SM1 and FWSM.
View 2 Replies View RelatedCisco WAN :: 1X10GEWL V2 And 1X10GEL V2 Difference
Mar 21, 2012SPA-1X10GE-WL-V2 and SPA-1X10GE-L-V2,I'm looking to add ASR 1002s for my internet edge and I need 10GE interfaces on them. Is there a difference between those 2 I've listed ?
View 2 Replies View RelatedCisco WAN :: Difference Between ES20 And SIp Cards?
Feb 5, 2012I am pursuing a case of Cisco 7600 where the customer has asked me to highlight the major difference between teh new ES20 line cards and the SIP 400 cards
View 0 Replies View RelatedCisco Infrastructure :: Difference Between ASA-SM1 And FWSM
Mar 30, 2013What is the difference between ASA-SM1 and FWSM and what is the throughput of it?
View 1 Replies View RelatedCisco Switching/Routing :: Difference Between FTE-10G And SFP-10G-SR
Sep 29, 2010explain me the difference between FTE-10G and SFP-10G-SR, being focus on an architecture Nexus.
View 5 Replies View RelatedCisco Switching/Routing :: Difference Between 851 And 881?
Nov 6, 2012I found a 851 router and tried to build a ezvpn tunnel. The issue I am running into now is that a 851 router can only have one vlan in its database. I need two vlans to go into the EZvpn tunnel with using another device. So can you tell me if a 881 router can have more than one vlan created on the router and can those vlans be assigned to a interface and can I create a svi for each of those vlans as well.
View 2 Replies View RelatedCisco WAN :: 7206 - Difference In LLQ Implementation Between GSR / IOS-XR
Mar 9, 2011I have a problem in understanding how LLQ is implemented in different platforms of Cisco.QoS should kick in only when there is a congestion in the link irrespective of queueing / scheduling (LLQ and CBWFQ).But in certain platforms like GSR and IOS-XR, LLQ is confiugred only with priority and police command not with "prioirity percent <value>" command. In priority and police command since policer is used, LLQ is always on even there is no period of congestion. Of course with police you can re-mark the exceed traffic to different marking but thats not the requirement in my case.
In platforms like 7206, LLQ is configured with "prioirty percent <value>" which works ideally only when there is a period of congestion. When there is no congestion, LLQ class can use scanvenge other classes as well.Would like to know is there any specific reason why there is a difference in the implentation of LLQ between different platforms of Cisco.
What Is Difference Between Cisco 1840 And 1841
Aug 8, 2011I have both here in front of me and they look identical and run the same software..
View 14 Replies View RelatedCisco Switching/Routing :: Difference Between SFP-10G-SR Or SFP-10G-LR?
Apr 10, 2012what the difference betwen these two cards? SFP-10G-SR or SFP-10G-LR
View 2 Replies View Related3g Stands For / Difference From 1g And 2g
Jul 27, 2012I want to make a career in networking.What does 3g stand for.is it different from 1G or 2g except that the speed is higher than the above two.And nowdays the USB modems that come out say 3g and also there are two kinds of speed 3.6Mbps and 7.2 Mbps.How come such a huge difference under the same kind of connection standard .And when 3g came out there was lot of hype.
View 1 Replies View RelatedDifference Between Localhost And 192.168.xxx.xx?
Jun 23, 2012When I start a web browser based application with a URL beginning with the 192 IP address. it runs as it should including the script dbscript.php which executes a MySQL commit unit.However when I start the application with the same URL but beginning instead with "localhost", it fails during the commit unit. It puts a blank screen up (rather than a Succesful or Failed commit screen) and leaves an error message in the Apache error_log indicating a problem with dbscript.php (which does the commit).I assume the 192 IP address is that of my modem. I assume that because the application will not start with the 192 URL if the modem is switched off. The application will start whether the modem is on or off if the URL begins with "localhost".I have checked all hosts files that are on the system and see nothing amiss there -- they are all defaults and no changes have been made by me.
Configuration:
Mac OS X v. 10.6.8
Apache v. 2.2.21
PHP v. 5.3.8
MySql v. 5.1.39
Difference Between NAS And RAID?
Feb 7, 2011difference between NAS and RAID
View 2 Replies View RelatedD-Link DIR-655 :: Difference Between WISH And QOS?
Sep 16, 2011Just like the topic says i am wondering what is the difference between QOS and WISH on this router, as far i can tell they are both for traffic shaping but surely there must be a difference.Also will either allow for entire IP's/connections be prioritized over others or just specific applications?
View 7 Replies View Related