Cisco WAN :: CAB-E1-RJ45BNC Cable Compatible With E1 Ports On MWR 2941-DC Router
May 16, 2012I was wondering if the CAB-E1-RJ45BNC cable is supported on the E1 ports integrated in the MWR 2941-DC router?
View 3 Replies
ADVERTISEMENT
Cisco WAN :: Difference Between MWR-2941-DC And MWR-2941-DC-A?
Jun 5, 2013Any difference between these (2) mobile wireless router models?
MWR-2941-DC
MWR-2941-DC-A
I can only find mention of MWR-2941-DC-A in Cisco's product documentation.
Cisco WAN :: Not Able To Configure Outward MEP 2941 MWR Router
Feb 3, 2011We got a new CISCO 2941 MWR router shipped with the “mwr2941-adviprank9-mz.122-33.MRA.bin” image .I am not able to configure the Ethernet service OAM(CFM) . We need to configure a outward domain and outward MEP.The system is not allowing me to configure a outward MEP. There seems to be no option to configure an outward MEP. I am successfully able to configure inward domain and inward MEP but this does not fit in our setup as we want CCM to be send outwards .
View 1 Replies View RelatedLinksys Cable / DSL :: X3000 Not Compatible With EA4500?
Apr 28, 2013The Linksys EA4500 router is designed to be added to an existing network as an additional access point. See the following description:
Setting your Linksys Wi-Fi or Smart Wi-Fi Router to Bridge Mode is applicable when you want to:• Connect two (2) routers with the capability of sharing the network resources • Use the router as an additional access point on an existing network • Connect the router to a modem/router from your Internet Service Provider (ISP) • Disable the router functionalities to work with third party devices
http:[url].....
Unfortunately the Linksys X3000 DSL modem router is not compatible to the bridge mode, since the internal switch fails if a MAC address of a wireless device switches between the X3000 internal access point and the access point of the EA4500 router. In the faulty state, no local network resources (print server, NAS, ...) are accessible anymore.
Linksys Cable / DSL :: Cm-100 No Longer Compatible With Comcast
Jan 12, 2012Comcast has inform me that my cm-100 is no longer compatible with their new upgrade. They say I need docsis 3.0 and mine is only certified to 2.0.
View 2 Replies View RelatedLinksys Cable / DSL :: X3000 Is Not Compatible With EA4500?
Feb 14, 2013The Linksys EA4500 router is designed to be added to an existing network as an additional access point. See the following description:Setting your Linksys Wi-Fi or Smart Wi-Fi Router to Bridge Mode is applicable when you want to:• Connect two (2) routers with the capability of sharing the network resources • Use the router as an additional access point on an existing network • Connect the router to a modem/router from your Internet Service Provider (ISP) • Disable the router functionalities to work with third party devices [URL]Unfortunately the Linksys X3000 DSL modem router is not compatible to the bridge mode, since the internal switch fails if a MAC address of a wireless device switches between the X3000 internal access point and the access point of the EA4500 router. In the faulty state, no local network resources (print server, NAS, ...) are accessible anymore.
View 6 Replies View RelatedSetup Cable Modem / Router With Printer Attached To One Of LAN Ports?
Jan 25, 2012Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.
View 3 Replies View RelatedCisco WAN :: MWR 2941 Stops Responding To Telnet
Apr 15, 2012I have two MWR 2941's in a lab environment awaiting deployment in a SAToP environment. They are both running the latest IOS, mwr2941-adviprank9-mz.151-1.MR3.bin. After being up for about 4 days they both stop responding to telnet attempts. I do not get a reject message - it just goes to a blank secreen with a flashing cursor. The only way to fix it is to reboot. I read that an older IOS had a similar bug on the MWR1941 but I cannot find anything about the 2941 having issues such as this.
View 4 Replies View RelatedCisco WAN :: 2941 GRE Tunnel Setup ( Bridging Interfaces )
Oct 1, 2012I have two Cisco 2941's going over a IPSEC VPN. I need to push the same network over this connection. For example i need 192.168.255.0 / 25 on my side and i need to plug in a laptop on the far end 2941 with the same network. I have built GRE tunnels before and i found a configuration online to brdige interfaces over a GRE tunnel.
when i get to adding the bridging to the configuration which i will show below i get an error. Please see below. Also when i try to add the same briding command on the GRE tunnel which is needed it doesnt show the bridging command as being available. The Cisco 2941's are both using version: mwr 2941-iprank9-mz.124-20.MRb1.bin.As i stated the only end result i need is to be able to configure a path from point A and B and have the same network on each end.
Cisco WAN :: Network Control Protocol (NCP) Over PPP Support In 2941
Dec 19, 2010I am using a CISCO 2941 DC-A router,For the PPP testing.I was using GL card from the GL communications.In the case of GL card it supports this below Feature"In MLPPP Simulation, NCP can be configured to send Packets over PPP links in the bundle or on the MLPPP bundle."My query Is in the Cisco Router 2941-DC-A,Is their support for sending NCP over PPP in the case of Multilink(MLPPP).Because I found out that in the case of MLPPP the Cisco router sends NCP packets over MLPPP only. How to configure the cisco router to send NCP packets over PPP in case of MLPPP.?
View 1 Replies View RelatedCisco WAN :: Implementation Of Short Sequence Number Format Support In PPP Multilink Header For MWR 2941
Jun 11, 2012One of my customer has raised a new requirement for implementation of short sequence number format support in PPP multilink header for Cisco MWR 2941 E1/T1 serial interface, whereas router is supporting long sequence number format.here is the output of "debug ppp negotiation" command:-Currently in the MWR debugging logs we can see that by default MWR is sending long sequence header format as below
*Mar 13 01:32:55.438: Se0/2:0 LCP: O CONFREQ [REQsent] id 238 len 25
*Mar 13 01:32:55.438: Se0/2:0 LCP: MagicNumber 0x26CDF693 (0x050626CDF693)
*Mar 13 01:32:55.438: Se0/2:0 LCP: MRRU 1500 (0x110405DC)
*Mar 13 01:32:55.438: Se0/2:0 LCP: EndpointDisc 2 16.16.16.11 (0x1307021010100B)
*Mar 13 01:32:55.438: Se0/2:0 LCP: MultilinkHdrFmt seq long classes 2 (0x1B040202)
While as per the requirement PPP multilink header should support short sequence.
MWR configuration:
controller E1 0/2
framing NO-CRC4
clock source line
channel-group 0 timeslots 1-31
[code]....
Linksys Cable / DSL :: X2000 3 Ports Not Enough
Jul 4, 2012I have the X2000. It has 3 ports. I need 4. I also have the WRT160N V3 router which has 4 ports. Is there a way to use this router with the X2000 to get the 4 ports I need ? If not, what are my other options to get 4 ports ?
View 2 Replies View RelatedLinksys Cable / DSL :: WAG120N - Ports Won't Open?
May 14, 2012normally i have no trouble opening serten ports for gaming purposes but now i just cant seem to get them open
if i do hyperlobby: (begin: 20999 ) (end: 21001 ) protocol: ( both) on my current ip address and select the active square
it should open port 21000 right?but if i check in game, it wont open, and if i check on internet for port checks it also says timed out, for some reason it wont open this port, also other game ports wont open anymore,not sure what router i got but i think this is the model : WAG120N
Cisco WAN :: How Many Of 881 Switch Interface Ports Can Be Used As Router Ports
Aug 7, 2011How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies View RelatedCisco Routers :: Setup And Connect Two RV082 Together With Crossover Cable Between WAN Ports?
Jul 6, 2011how to setup and connect two RV082 routers together with a crossover cable between their WAN ports.This is to connect two separate LANS together via an ethernet connection. For staging we are setting everything up with a crossover cable in our shop. Ultimately the crossover cable will be replaced by a microwave link between the two LANS several miles apart. There will be no internet connection.
View 5 Replies View RelatedLinksys Cable / DSL :: WAG200G Don't Get Light On Front Panel On Any Of Ports
May 19, 2010I'm having trouble connecting via ethernet to my WAG200G. Everything was working fine a week ago but now, nothing.The problem is only occurring with one computer and I've tried the troubleshooting guide on the website to no avail.When I connect the ethernet cable from my computer to the modem/router, I don't get a light on the front panel on any of the ports. I've changed cables, ports, disabled ZoneAlarm and firewalls and nothing comes up. I've checked the ethernet connection from the computer to another computer and it's working fine.
On a different computer, I have no trouble connecting to the ports and can confirm that 1-4 are working and the lights come up.
Linksys Cable / DSL :: WAG320N Routing Ports For Getting Port 21 To Route To 786
Feb 16, 2011i am trying to get my router to change ports for certain tasks for eg FTP Port 21 i dont want to use 21 and telnet Port 23 i dont want to use 23 ,is there a way of routing ports so that i can get port 21 say to route to port 786 instead so i can ftp from port 786 and so and and so forth
View 3 Replies View RelatedCisco WAN :: SA-VAM2+ Compatible With 7201 Router
Sep 11, 2011Is a SA-VAM2+ compatable with a 7201 router? When I look in the configuration tool I don't see that option.
View 1 Replies View RelatedD-Link DIR-825 :: Does Any Antenna RP SMA Are Compatible With Router
May 4, 2011I know there a lot of threads on antenna for the DIR-825 but my question is ....does any antenna RP SMA are compatible with this router ? url...
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Dual Band Router Compatible With DHCP And VPN
Mar 18, 2012Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies View RelatedCisco VPN :: AIM-VPN / EPII-PLUS Is Compatible With 1841 Modular Router?
Nov 5, 2011I would like to know if AIM-VPN/EPII-PLUS (at the moment installed in 2821 ISR) is compatible with 1841 modular router?
View 5 Replies View RelatedWireless :: Linksys Router Compatible With MiFi2200?
Feb 26, 2011i have MiFi2200 internet service .when router is down stairs in main part of house , signal is weak upstairs on desktop. i am using Linksys speedbooster on desktop to receive wifi signal. what can i do to increase MiFi signal to upstairs desktop computer?
View 1 Replies View RelatedVista And Windows 7 Not Compatible On The Same Wireless Router?
Oct 15, 2012I have just spent an hour with TalkTalk technical support being told that the new router they supplied today can only be used wirelessly for Vista or W7 but not both together. Am i going mad. Both connect to the router but my Vista laptop will not connect to the internet and will only show as an unidentified public network.
View 5 Replies View RelatedTP-Link 3G/3.75G Router :: WM66E Not Compatible With TL MR3020
Jan 23, 2013Region : Philippines
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Smart Communications Inc.
TP Link,
Your 3g router model TL MR3020 is not compatible with USB modem WM66E. Is there a workaround for this? Any existing bin files?
TP-Link 3G/3.75G Router :: TL-MR3420 - Compatible With ADSL2
Jan 16, 2013Region : NewZealand
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 1.2
ISP : Now.
Is the TL-MR3420 (previous model/shape) compatible with ADSL2+? I can't find clear indication that it is or isn't
Cisco Wireless :: Linksys E1200 N Router - Backward Compatible With 802.11b/g
Jun 20, 2011i'm planning to buy this wireless router but i don't see the specs whether it's backward compatible with 802.11b/g. If it works with b/g.
View 3 Replies View RelatedLinksys Wireless Router :: E1200 And AE2500 Compatible?
May 4, 2012I have an E1200 and an AE2500 adapter..I cannot get the ae2500 to connect to the router. I have another Belkin adapter that connects just fine but it only has speed up to 150mbps. I want to connect using the other adapter but cannot seem to get it working with this router.
View 5 Replies View RelatedLinksys Wireless Adapters :: Will WUSB11 Be Compatible With G Router?
Apr 13, 2007I bought this adapter (WUSB11) not knowing there were two different kind of wireless networks. We have a wireless-G router and NOT a wireless-B. I do not want to open the boxes to try the adapters. Will the wireless-B adapters be compatible with the wireless-G router?
View 5 Replies View RelatedHuawei EC159 Usb Modem Compatible With Asus Router RT-N56U
Dec 17, 2012I wanted to know whether Huawei EC159 usb modem is compatible with ASUS router RT-N56U as I want to be sure before going for it..!
View 3 Replies View RelatedLinksys Wireless Router :: WRT100 Model Is Compatible With Windows 8?
Feb 28, 2013Does WRT100 model is compatible with Windows 8? Everytime I connect my laptop all the other devices drop their connection.
View 2 Replies View RelatedTP-Link 3G/3.75G Router :: Sierra 320u 4g Modem Compatible With Tl-mr3040?
Feb 23, 2013Region : australia
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Australia
Model : TL-MR3040
Hardware Version : Not Clear
Firmware Version :
ISP :
does any one know if the new sierra 320u 4g bigpond modem will work with the tl-mr3040 battery wifi router, and does it handle the 100mbs speed, also how relyable are these routers, and what is its range.
Asus RT-N12 Dd-wrt Compatible Router For Weekend Home Theater Project
Apr 24, 2011I've got a relative that needs a wireless solution for their new HD LCD. The spouse has vetoed running cat-5 (I'd have told her to pound sand...) so we're looking for an inexpensive router that we can install dd-wrt on and throw it in bridge mode. The Linksys wrt54g seems to have dried up in the area, no one seems to have one in stock and I haven't had any luck finding an Asus RT-N12 that I can get delivered in a timely fashion, that would have been my second pick.
Any recommendation for a fairly inexpensive G/N router that either features a robust bridge mode or that I can flash for this project?
Linksys Wireless Router :: Compatible With WRT54G Antenna Connection?
Apr 7, 2013I have to replace our WRT54G router--it's currently connected to a power booster and and omni-directional antenna. Is there a router with an antenna connection compatible with the WRT54G--preferably a single antenna model?
View 4 Replies View Related