Cisco Routers :: Setup And Connect Two RV082 Together With Crossover Cable Between WAN Ports?

Jul 6, 2011

how to setup and connect two RV082 routers together with a crossover cable between their WAN ports.This is to connect two separate LANS together via an ethernet connection. For staging we are setting everything up with a crossover cable in our shop.  Ultimately the crossover cable will be replaced by a microwave link between the two LANS several miles apart.  There will be no internet connection.

View 5 Replies


ADVERTISEMENT

Cisco Routers :: RV110W - Use Crossover Cable Accordingly

Jul 8, 2012

Regarding to the connection RV110W to any Cisco router, should I use a crossover cable accordingly? Because, I heard that the crossover function is done inside of some switches and routers. So, I would like to know whthether the function is included into RV110W.

View 3 Replies View Related

Can't Connect To PC With A Crossover Ethernet Cable

Dec 29, 2012

my laptop has a very annoying habit of disconnecting from the internet, on annoying ass random occasions, the network dropped. When my laptop connected back to the internet again, my pc now says that there is no internet access coming from the cable. I have reset both my laptop and my pc, the router and changed cables. I have also enabled NETBios with TCP on both computers, but nothing.

View 5 Replies View Related

Huawei B683 / Connecting Two Wireless Routers With Crossover Cable?

Mar 10, 2013

I tried to bridge two wireless routers wirelessly, but after extensive research I came to the conclusion that this wasn't possible.

Now I am trying to connect these two routers through a cat5 cross-over cable and I wanted to know whether can I disable DHCP on the router which has internet, and enable the DHCP of the router which is connected to the printers, because I have a few systems that shouldn't be connected to the internet.

What I had in mind is if I switch the DHCP OFF on the internet router and turn it ON on the Huawei B683 router, I could add those devices' MAC addresses to the internet gateway router to deny them access to the internet..?

View 2 Replies View Related

Connect Two Computers (XP And Windows 7) Using Crossover Cable?

Jul 2, 2011

I'm trying to connect my two computer (XP and Win 7) using a crossover cable. I set the the IP as 192.168.0.1 and 192.168.0.2.The computers can see each each other and I can access the public folder of the win7-machine on my XP-machine. However, if I try accessing the xp-machine it says:

Quote: You don't have permission to access \PC. Contact your network administrator to request access.

Both computers can ping each other without problems.I've tried rebooting the computers, plugging the cable out and back in again, turn Internet (wifi) off but it doesn't work. Also, the File and Printer Sharing is enabled, too. Disabling the firewalls won't work and I deactivated the user/pass login so there is no password needed.

View 6 Replies View Related

Home Network :: Connect Two Computers Using A Crossover Cable?

Jul 3, 2011

I'm trying to connect my two computer (XP and Win 7) using a crossover cable. I set the the IP as 192.168.0.1 and 192.168.0.2.The computers can see each each other and I can access the public folder of the win7-machine on my XP-machine. However, if I try accessing the xp-machine it says:

View 2 Replies View Related

Connect Laptop To Computer Using Ethernet Crossover Cable?

Jul 30, 2011

i use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro

View 1 Replies View Related

Cisco Routers :: How To Setup RV082 Behind A ADSL Router

Feb 21, 2013

I have a RV082 VPN Router. But my internet connection is ADSL brodband. How can i connect and setup a VPN connection to other RV082.

View 1 Replies View Related

Cisco Routers :: RV082 / Cannot Setup Any Security On Wireless Connection

Feb 6, 2012

I have a Rv082 router that works great and I added a Cisco wireless Wap4410n to one of the ports and it works great for all my wireless connections. My problem is I cannot set up any security on the wireless connection. I see it on network majic pro but cannot access it thru my router . Do I have to install a poe switch first?

View 0 Replies View Related

Cisco Routers :: Setup VPN Form Outside To Use Static Address From Lan Side Of RV082?

Dec 19, 2011

I have a RV082.I need to set up a VPN form outside to use a Static address from the Lan side of the RV082.

Lan is 172.16.0.126
Wan is 10.161.48.1

The computer using the VPN will need a virtual IP on the Lan of the RV082 so that it is seen as being on the same network as the equipment on the LAN.

View 2 Replies View Related

Cisco Routers :: RV082 And Win 2008 Server - Split Tunneling Setup

Jun 17, 2012

Trying to setup split tunneling over Site-to-Site (Gateway To Gateway) VPN between RV082 and Win 2008 server. Tunnel seems to be ok, I can ping/access by IP hosts from both ends. But I can't get split DNS to work. Here is the setup

10.10.100.2 is the DNS server for xyz.local zone. It is at remote network.

The tunnel and routing work properly. I can ping 10.10.100.2 either from RV082 (system management -  diagnostics) or from hosts at local network.
 
Moreover, I can run nslookup on a host from RV082 side (local network), set 10.10.100.2 as server to be queried and test dns resolution. names of hosts from xyz.local are resolved correctly. But. If I use nslookup on host to query RV082 as a DNS server and query for a host from xyz.local it responds that xyz.local is nonexistent domain. The same result I get trying to resolve/ping same name on system management -  diagnostics page. Resolution of names from xyz.local fails. But Internet names are resolved
just fine.
 
I've tried to reboot the router,  connect/disconnect the tunnel, set Domain Name fields of split DNS configuration pagein different ways including fqdn of hosts from xyz.local No effect. Just the same situation.

View 2 Replies View Related

Setup Cable Modem / Router With Printer Attached To One Of LAN Ports?

Jan 25, 2012

Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.

View 3 Replies View Related

Crossover Cable Still Required?

Apr 10, 2012

I want to directly connect two Win XP machines together to transfer large files.Both have "Gigabit Ethernet".Its been years since I last did this, and used to need a special cable called a crossover cable to accomplish this, but reading up to refresh my memory I believe I no longer need the special cable, but can use the cable that now connects my cable modem to my computer, as the Gigabit specification eliminates the need for a crossover cable.

View 3 Replies View Related

Multiple Cable Legs Pass Through Or Crossover

Jan 2, 2012

I'm trying to run a CAT6 cable from my router to my PS3 in the living room downstairs. It has to make several connections along the way. I've done something wrong, because I'm not getting a signal at the last outlet, and now I'm wondering if one of these legs needed to be wired for crossover, not pass-through.

View 3 Replies View Related

Home Network :: Wifi Or Rj-45 Crossover Cable?

Mar 29, 2012

Ad hoc network may created between two PCs either with, wifi or a RJ-45 Crossover cable?

View 7 Replies View Related

Creating A Network Cable (crossover Or Straight Through)

Oct 28, 2012

I just got done running CAT 6 wire's into different rooms and placing jacks on the wall which all works correcting going into the patch panel. The problem I am having is that the Access Points on the ceiling I decided to make it a little easier and use regular network cable and cut one end off and place it into the patch panel the same way as all the jacks. The AP's are POE and they are just not getting on the network. Do I need to do something different for this cable?The way I punched all the wall jacks and all the cables to the patch panel is by using section B on the jack so because of me cutting a cable and leaving one end on, should I use A or is there something else I should do?

View 3 Replies View Related

Connecting Laptop And Netbook With A Crossover Cable?

Aug 30, 2012

I have been trying to connect my laptop (Windows Vista) and my netbook (Windows 7) with a crossover cable, and I have followed every single step of the instructions I have found on the net, including disabling Windows firewall, but it won't do it and when I try to ping the failure seems to be when the netbook tries to ping the laptop (100% loss).

View 6 Replies View Related

Connecting Two Computers For Gaming With Crossover Cable?

Mar 28, 2011

how to connect two computers for playing games?

View 1 Replies View Related

Intel 5100 AGN Stopped Working After Using Crossover Cable

Mar 29, 2011

After trying to communicate between an XP machine and Win7 using static IP and a crossover cable my wireless card stopped working. I did make the mistake of trying Homegroups prior to that.

It says Unidentified network and constantly remains in the Public Profile. Not even WiFi Sync is working...diagnostics reveal a problem with the drivers though several have been tried. From the originals to the latest version...Properties describe the device is working normally?

View 6 Replies View Related

Cabling / Cards :: Convert A Cat 5e Crossover Cable To Make It A Straight?

Feb 9, 2012

easiest way to convert a cat 5e crossover cable to make it a straight? I have 2 PCs networked & am introducing a router & need to covert the cable without having to rewire it if possible.

View 1 Replies View Related

Cisco Routers :: Can Connect SA520W To RV082

Sep 25, 2012

I wanted to know if you can connect a Cable modem to a SA520W, then connect a RV082 to the SA520W?

View 5 Replies View Related

Cisco Routers :: RV082 - Possible To Connect Servers Each Other In VPN

Sep 8, 2011

I did install server system with mscs and Domain controller and Active directory.I want to connect this dc/ac server from other places such as korea / and japan.
 
I have a public IP But our country ISP Don't open 135/445 port for security. So I can't connect DC/AC server from other places.At this time i did read many article and find good way to handle it. Is it possible for other servers to connect DC/AC server by using the RV082 VPN service.

View 1 Replies View Related

Cisco Routers :: RV082 Can't Connect To Public IP From LAN

Feb 27, 2012

I've a problem with Cisco RV082. I want to connect to my public IP from local IP. But it seems it's been block by the firewall.I've added a firewall rules to allow ANY connection from LAN to outside world. But has no effect.
 
LAN IP : 192.168.1.5.Public IP (which is assigned to LAN IP 192.168.1.5 by One-to-One NAT) : 118.xxx.xxx.xxx

View 6 Replies View Related

Cisco Routers :: RV016 Some Ports Configured In Setup / UPnP

Apr 3, 2013

I have a Cisco RV016 router, with some ports configured in "Setup --> UPnP". Currently I have problems to configure new ports. I can create the service in "Service Management", but when I add this service to the list, I press "Save" and the router close the session. I need to re-login the router, and it don't save the changes.
 
However, if I add a service that was already exists before having this problems, the router save the changes (But the router close the session too).
 
The router has the last version of firmware since the first run.

View 4 Replies View Related

Cisco Routers :: Connect From A Linux Station To RV082

Oct 6, 2010

I want to connect from a Linux station to RV082, is it possible? What software can I use and with what configuration?

View 2 Replies View Related

Cisco Routers :: Setup 2 Separate VLAN Assigned To Different Ports On RV180-K9-NA

Feb 4, 2013

I have a Cisco RV180-K9-NA router.  I would like to set up 2 separate VLAN assigned to different ports on the router. I will be using LAN port #1 to communicate with the router.  The NIC connecting the PC to the router has multiple IP addresses assigned to it so that I can communicate with the separate VPNs (192.168.1.x for the router; 172.16.10.x for VLAN #1 on port 2; and 182.16.10.x for VLAN #2 on port 3).  I also need to be able to have the router provide both IPv4 and IPv6 DHCP services for devices on each subnet.

View 3 Replies View Related

Ethernet Port Splitting Options For Net-book File Sharing If No Crossover Cable?

Jul 19, 2011

I have a desktop with a "black screen", but the computer is running. I need to get files/documents off that computer. How can I get them without being able to see the monitor? I have a netbook, a portable hard drive, and regular ethernet cables, but not a cross over cable.

View 1 Replies View Related

Cisco Routers :: Unable To Connect To Network Printer Through RV082

Oct 2, 2011

I installed a RV082 at my remote branch and I successfully created a VPN tunnel to my ASA5510 at our core data center.
 
The PC's that I plug into any of the 8 ports are working fine. However, when I plug in a network printer, it does not work from the network, only from a PC that is also plugged into the RV082, basically locally, using TCPIP
 
From our data center, I can ping the printer, but the printer shows 'Off-Line'. I even tried to add a TCPIP port, in the printer setup, and it does not see it.

View 1 Replies View Related

Cisco Routers :: Connect RV082 WAN2 / DMZ Port To Network?

Jan 17, 2013

I want to use WAN2 in DMZ mode on my RV082 router.  I want to connect this to a router which will go to another network.
 
So it will look like this:
 
LAN1 192.168.188.0
|
|
|

[Code].....
 
UPDATE: This does not work.  In case anyone else tries this, it is not possible with this model of router.  The RV082 has to either be in gateway or router mode.  In gateway mode, it is doing NAT, and the DMZ will not route correctly to the other LAN.  In router mode, the DMZ does route correctly to the other LAN, but the internet will not work because NAT is turned off.  We had to add a second RV082 to the configuration to get this working.  It cannot be done with 1 RV082.

View 1 Replies View Related

Cisco Routers :: RV180 / Setup Custom Service That Contains Both Multiple Disjoint Ports?

Jul 11, 2012

I have an rv180 and I'm trying to setup a custom service that contains both multiple disjoint ports (some UDP some TCP), as well as a TCP port range. This has lead me to a couple of questions.1) Is it even possible to have a single custom service with disjoint ports? Is it just going to be necessary to define multiple partial services for this?2) Is it possible to forward a range of ports? It's clear how to define a service with a port range, but the port forwarding table interface only allows me to select one LAN-side port for any service. Is there a secret notation that I need to do here that will just forward to the same LAN-side port as the WAN-side port---effectively one-to-one NAT forwarding, but just for the selected service?

View 8 Replies View Related

Linksys Wired Router :: RV082 One-To-One Nat Different Ports?

Feb 8, 2011

I am setting up One-To-One NAT to redirect traffic from the internet. We have 5 static public IP addresses, and I set up One-To-One Nat to redirect to local Win servers. One of the servers running Web server and FTP server. For some reason redirection works fine for the Web server, but does not work for FTP server when I try to access them from the internet. FTP server works locally, but my FTP client cannot connect from the Internet. I opened the ports in the firewall, and these ports show as opened when I test them from external servers. What am I missing?

View 1 Replies View Related

Linksys Cable / DSL :: WAG320N / Setup Connection Between Routers Over Internet?

Apr 26, 2011

Is it possible to setup a router to router connection over the internet with fixed IP Addresses with two WAG320N?

View 3 Replies View Related

Cisco Firewall :: Connect 5505 To 5510 Direct Via Crossover?

Mar 23, 2013

A bit of a straight forward question, is it possible to connect a 5505 to a 5510 direct via a crossover or do you need a switch inbetween capable of trunking?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved