Cisco WAN :: Terminate IP Sec VPN Tunnel On ASR 1002 Router?
Mar 28, 2012
I want to terminate the IP Sec VPN tunnel on the Cisco ASR 1002 router, but it shouldn't have be bedirectional traffic to the other end., and it should be answer only, We don't run tunnle over GRE (no IPSec profile), just IPSec only. I found there is a command "crypto map *** client configuration address respond" but it looks it is global command and we have lots of VPN terminated on the Cisco ASR 1002 router, How can we configure the "Answer Only" for only one specific VPN tunnel and it won't impact the others?
View 2 Replies
ADVERTISEMENT
Dec 19, 2010
We want to terminate new 10M link via Ethernet interface on Cisco 1841 router. We have free Gig port on the router. We also have HWIC-FE module inserted in the router. However, our implementation team said that Cisco 1841 doesn't support 10M link. It is not designed to cater to such high Bandwidth.
View 14 Replies
View Related
Feb 12, 2012
I have implement MPLS L3VPN on my network to provide service to customer and right now we plan to have service VPLS on our same router. What is needed to run the VPLS in our MPLS network ? I heard that we need addictional switching module and upgrade my IOS to support it but I am not sure.
View 2 Replies
View Related
Sep 28, 2012
I get this error when updating the IOS on our ASR 1002 router:
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
calculated e581b06d:923b1cc8:e5497571:66f9de35:70fd0ac8
expected aedab318:d8f213f5:36e12355:f70fa900:5c12d08c
SHA-1 hash doesn't match
boot: error executing
Is there someplace where I can configure the expected SHA-1 hash?
View 1 Replies
View Related
Feb 3, 2013
I have a WRT160N that I used just once after purchase (my ISP gave me a wireless router). I could not remember the PW, so I reset. (The computer saw the old router name but I had no PW)When I run the software (CD that came with the product says 150N), it get to "configuring computer" and stops there.I tried downloading the software, but when I try to run it says "Application requested runtime to terminate in an usual way."When I go to the 192. URl and try to login using a bank user name and 'admin," it jsut keep bringing up the password box.
View 2 Replies
View Related
Jul 26, 2012
Any router (I'm considering ASR 1002 with 10GE SPAs) that can support the following:
-10GE interfaces
-can handle 1.5Gbps but scales up to 5-6Gbps different seasons
-take on full internet routes from 2-3 providers
-will live on the internet edge
View 7 Replies
View Related
Jan 17, 2013
Used an E4200 version 1 to terminate PPPoE on a really high speed connection? By that I'm talking say 400Mb or higher.
View 9 Replies
View Related
Feb 12, 2013
I was asked to configure a new ASR 1002 today and after successfully puttintg the config on the router (via TFTP) the router will no longer communicate with anything. There is nothing in the config to cause this (it was actually pulled off a working production ASR 1002) and I am unable to ping a local loop back IP while consoled into the router?? I removed the config, reloaded the router and configured a new loop back - same issue cannot ping the loop back or anything else connected to this router.
View 7 Replies
View Related
Feb 12, 2013
We have CISCO ASR 1002 router on our DC, I want to enable TACACS on this router.what is the usage of key, we need a separate key for every device? or. [code]
View 9 Replies
View Related
Mar 14, 2011
I have an ASR 1002. Behind that and across another small MAN network (considered inside) I have an ASA. On the remote end, I have a simple 2811.
I need to create a vpn peer from the remote router to both the ASR (to hand off traffic there) and also a peer at the ASA (to encrypto across the MAN). The ASR1002 has the serial connection (DS3) to our MPLS cloud in which the remote is on the opposite side of.
So basically, I've created a single isakmp policy with two crypto map's by the same name but set to different peers and placed on the remote router then applied it to the serial interface. This works fine. Now i throw in the ASA which is behind the ASR. However, the connection still comes through that ASR to get to the ASA.After setting it up, it works as long as I don't have the crypto map applied to the ASR. If i apply the crypto map to the so interface of the ASR, my asa vpn connection stops working.It almost seems as if the crypto map on the ASR is grabbing my enrypted traffic destined for xx.xxx.24.14 and trying to do something with it. [code]
Why can't i peer from my remote router to both the ASA and the ASR on the opposite end of the serial link?
View 1 Replies
View Related
Aug 13, 2012
We have 400 branches is ended on ASR 1002 router. ASR 1002 is the Hub router. When we disconnect/connect WAN interface or Shut/no shut tunnel interface, at the moment, router is not reacheable via telnet.
But if i disable the EIGRP on tunnel interface, tunnel are ok, then when i enable eigrp on tunnel interface, all eigrp neighbourhoods are OK.Is there any way to limit NHRP or EIGRP packets ?
View 1 Replies
View Related
Sep 23, 2012
I'm in process of purchasing a new Cisco routers for our branches that will be used primary to enable IPSec virtual tunnel interfce with "tunnel mode ipsec ipv4". does the default IOS IP Base supports this feature? or i need to purchase DATA license or SECURITY license?
View 4 Replies
View Related
Aug 6, 2012
We have an ASA 5510 running 8.3 that we need to use to terminate a LAN to LAN IPSEC VPN.
Problem is we only have one public address available so have had to configure the link between the ASA and the Internet Router on private addresses.
Is it possible to NAT the public address to the inside or outside interface of the ASA and terminate the VPN on that interface?
View 7 Replies
View Related
Jun 14, 2011
I currently terminate my L2L VPN sessions on the "OUTSIDE" interface via the actual IP address assigned to that interface. Can I assign the OUTSIDE interface a second address (VIP, Logical, Virtual etc.) and then terminate my L2L VPN sessions on that second address?
View 3 Replies
View Related
Apr 5, 2011
How to terminate a vpn session on the asa 5510, when u issue the command sh vpn-sessiondb remote?
View 1 Replies
View Related
Jul 1, 2011
I configured cisco ace 4710 with ssl-proxy and it is not working,url..When i put https://10.1.41.20 the output is: "There is a problem with this website's security certificate", so i click in "Continue to this website (not recommended)" and the ace dont balance the output show error "Internet Explorer cannot display the webpage". [code]
View 2 Replies
View Related
Dec 24, 2011
I am having an issue I need to have the outside interface terminate a ssl AnyConnect Client. I have several groups the will login and I need multiple inside interfaces to satisfy my security needs.
I have one group call ombudsman-mhdd and they need to go out interface g0/1.231 and another group called oet-router go out g0/1.232.This works on my 8.2 box but I am having trouble routing traffic out these interfaces.
interface GigabitEthernet0/0
description trunk mplsfe-hub g1/10 - - null
nameif outside
security-level 0
ip address 207.171.92.25 255.255.255.252
!
[code]....
View 3 Replies
View Related
Nov 15, 2011
I'm looking to use a Cisco 3945E to terminate a 1Gbps Ethernet internet connection and I want to know the realistic throughput that I can expect. The router will only be configured with BGP with partial routes. No firewall or QoS will be configured.
View 8 Replies
View Related
Apr 15, 2013
I have a SIP trunk in my Florida office connected to a Cisco 2851 ISR. I'm using Unified Communications Manager 8.0 and life is great.
We just opened a new office in Spain and now the fun begins. We created a site-to-site VPN tunnel using ASA 5510 in Florida and ASA 5505 in Spain. We can register IP Commuicator phones in Spain but when they make calls it shows up as a Florida call. We need it to show up as a Spain call.
We are thinking to get a SIP trunk into the Spain office but I only have a ASA 5505 over there. Can I terminate a SIP connection to it? Is this the best option? If not, what is the recommened setup?
View 1 Replies
View Related
Jun 20, 2011
On our ASA 5510 we already have one ISP link terminated on outside interface. There is correspoinding nat and global configured for outbound access to internet.
Now we need to terminate second ISP link on one of the DMZ interface to have redundancy for the primary ISP.
When primary ISP link or router is down we need to send all the traffic to secondary ISP router. How do we configure NAT and global for this condition that only when primary is down then only this NAT -Global should be used. Do we have anything like object tracking associated with the NAT-global.
So that as long as Primary RTR - object is up ASA will use the first NAT-Global pair. When primary ISP is down RTR-Object is not reachable then ASA will perform the second NAT-Global operation.
Also can we have default route pointing to Outside interface (primary ISP router) and in case of primary router failure it will point to secondary ISP. Do we have "track" in the static route commands on ASA.
View 2 Replies
View Related
Aug 6, 2012
I Have asa 5520 terminate the remote access VPN Connection,when successfully connect to my corporate Network and try to copy a file(30MB) from the share to my PC ,it takes around 2 Hours or it disconnect.what is the speed of the vpn client once y connected to the corporate over the Internet ?at my home i have 512 ADSL while at my corporate we have 155Mbps Internet speed.
View 1 Replies
View Related
Aug 4, 2012
I have a 5510 with me. I want to terminate two Internet links on that. The primary Internet Leased Line to access my DC network using Site-to-Site VPN, and the secondary ADSL connection to access my other location network via VPN and and for web browsing. How can I achieve these goals.
View 1 Replies
View Related
May 24, 2011
How do i terminate a split cat5 for data and voice at the patch panel end?
View 3 Replies
View Related
Oct 8, 2011
I would like to know the technical Specification regarding the AC power supply for ASR1002.
I need to know the following:
Voltage
Amp
BTU
Watt
BTU and AMP for ASR 1002?
View 1 Replies
View Related
Feb 2, 2012
we use an asa5520 like vpn termination point, asa uses acs5.3 for authentication purpose, and all seems to work properly,but acs5.3 doesn't purge user sessions when vpns terminate; I can see many user "logged-in" into menu System Administration --> Users --> Purge User Sessions; this is a problem, because we have configured max session per user how can avoid this problem? is there any new configuration to implement into asa?
we need to configure max session per user, but there is only a global option applyed to all users.how can we configure user accounting? we need to know how long a user is connected via vpn session.
View 1 Replies
View Related
Feb 4, 2013
I am facing with Cisco 3560CG Switch. We have a Cisco WS-C3560CG-8PC-S (Cisco Catalyst 3560-C Switch, 8 GE PoE, 2 dual-purpose uplinks, IP Base image) switch which will be a core switch and the internet link from the ISP is terminated on a Modem. The ISP configured the internet modem and provided the details such as Gateway IP, Subnet Mask, DNS IP address, Usable IP Address Block, to configure the switch, where ew have connacted the Modem. When, I verified the details, there were only 4 IP addresses available under Usable IP address block. Spoke with the ISP and they confirmed that they cannot increase the IP Addresses (some limitation on the Modem) in the pool and we have to do NATing at the switching (Which we can't do, because of IP Base image limitation). About the network, it will be a flat network with only one VLAN which is used for Wireless Guest Access.
View 1 Replies
View Related
Apr 26, 2011
We are using a CISCO1921-SEC Router. On the "WAN" side we have 1 public IP Adress assigned by DHCP. At the moment we are using the WAN Interface with a crypto-map as endpoint of some IPSec connections. We set up a zone-based-firewall with "WAN" and "LAN" zone. In this setup all IPSec Endpoints are on one Interface - connections to the "LAN" zone can be managed by rulesets. What about connections between IPSec connections and the zone "self".We like to terminate each IPSec connection in a separated zone. How can this be configured ?Each one on a "tunnel inetface" with "tunnel source ..." binding ?
View 4 Replies
View Related
Jun 28, 2011
I have one ASR 1002 router and one GSR router. when i insert SFP-OC48-IR1 module with GSR and connect 100 Mb link that comming from MUX then the GSR port is up but when the link is connect with ASR with same module the port not going up.i had cross check the module GSR to ASR but the problem remain same.
View 1 Replies
View Related
Oct 27, 2012
I have Cisco router ASR 1002-F on which I have created two subinterface, Gigabitethernet 0/0/1.333 and Gigabitethernet 0/0/2.111. I try to bridge those two subinterface but no success. I can create bridg-group and everything needed but I can not add subinterface to specific bridge-group. If I try write command bridge-group on subinterface there is not even possible to chose this command.
View 1 Replies
View Related
Mar 6, 2011
OK ran into a little problem with getting this to work. Only group members participate in the encryption process, correct?
I have numerous remotes all coming into one central location. I set up a KS and have currently only 2 of the remote routers set up as GM's, with the intention of the others coming into play as I move forward. Here is basically what I have in my KS and GM's:
KS
crypto isakmp policy 10 encr aes authentication pre-share group 2crypto isakmp key testkey address [code].........
GM's
crypto isakmp policy 10 encr aes authentication pre-share group 2 lifetime [code]....
So I applied the crypto map to the serial interfaces on my routers on either side of the cloud (central-ASR1002 and remote-ISR1841). When I did this, ALL the remotes went down and I'm not sure why. Even the ones that didn't have anything to do with gdoi. Ya, it wasn't good. I thought that only the group members would be affected.
Is it the fact that my acl is encrypting any to any? Surely I don't have to reverse that and have two statements with the same syntax. I'm basically just trying to encrypt all traffic from specific remotes back to the central side. However, I'm trying to do it without taking down the rest of my network .
View 1 Replies
View Related
Oct 26, 2011
We are running LMS 3.2 with IPM 4.2 installed....and we are looking to do IPSLA monitoring on a couple of our Cisco ASR's with IOS-XE code installed.
I looked at the IPSLA feature mapping and it only talks about supported IOS code....do we need to upgrade our current IPM module to a current version?
View 0 Replies
View Related
Oct 23, 2012
I have route-map defined on my ASR 1002 12.2(33)XNE and applied to my gi0/0/1 interface. I need to change the IP address defined on the "set ip next-hop ..." line. My question is, when I make the change in just the route-map definition, does the change take effect immediately, or do I need to remove and re-apply the "ip policy route-map ..." statement on the interface? If I do have to remove and re-apply, will this be service-affecting for all the traffic flowing through the interface? I'm just not sure what to expect.
View 2 Replies
View Related
Jan 8, 2013
I have Cisco ASR 1002, code XE 3.4.1 doing site-2-site VPN with an ASA managed by another company that I have no control over running 8.3 (I think).the site-2-site vpn is very easy straight forward as follows.
View 4 Replies
View Related
