D-Link DIR-615 :: Pages Won't Load / Internet Speed Is Slow
Jan 3, 2012
I`m new here I recently purchased the dir-615. I started configuring with cd but i couldn`t get past the step where it should verify if cables are plugged in , so I did it manually. Some pages won`t load , internet speed is slow ( Both wireless and lan speed ) . I am using a PPPOE connection , I even got my ISP to check my settings, and he said it was alright but it reduces my speed by a lot. Usually I download with 1 MB/s with the router on wi-fi I hardly get 50 kb/s and on lan max is 100 kb/s.
View 1 Replies
ADVERTISEMENT
Jun 9, 2011
I am having trouble with the internet on my HP laptop.. I am positive it is connected to the internet, yet pages won't load.. when I troubleshoot it says no problems detected
[code]...
View 14 Replies
View Related
Apr 3, 2011
My computer had a filter on it that used a proxy server. The company (called Familink) went out of business. They provided an application for removing the filter, but it did not work, and the filter was never removed. I believe when the filter was installed, it modified the registry to prevent internet browsing unless the proxy was active. Now, since the company is out of business, there is no way to use the proxy, and I cannot browse the internet at all. I can still connect to secure (https://) sites just fine, but not any other channel. It is not a problem with the ISP, because I can browse the internet just fine on the same computer using linux. It just does not work with windows. When running a diagnostic test, I get error 0x2751, or "WSAEHOSTUNREACH"
View 3 Replies
View Related
Feb 24, 2012
IE and Firefox both refused to load my homepage (google) or any other page in my bookmarks. Uninstalled and reinstalled both, even going back a couple of versions and still nothing. I know I'm connected as my iPhone works fine. With this in mind, I tried opening up safari to see what that would do and to my supprise, it works fine, bit slow but still, at least it works. So now I defiantly know that the Internet is working.
View 4 Replies
View Related
Jul 20, 2011
I have done so much research and tried almost everything on these forums, but still the internet wont load on my laptop. It is a Acer mini with Windows 7 starter. The other day the internet just stopped loading pages. It shows that it is connect to my router, and when I try to go to a page, it just says loading. I tried to connect with the ethernet chord from the modem and it does the same thing. I think there is a connection, but just wont load pages because the avast will update the virus definitions. I've tried to update the drive, reset the ipconfig. One thing I noticed is that the ip6v says not connected but the ip4v says internet. If I can do anything to get more info I surely will post it back up here, I just need to get my connection back up
View 4 Replies
View Related
Nov 27, 2011
My computer (running windows XP and connected to the internet with a D Link USB adapter) refuses to load any webpages: despite showing full signal strength and connection in both the D Link settings and the windows XP wireless panel.I am able to ping websites and other computers in the house (all of which are able to access the internet) but no pages load in any browser I try.
View 1 Replies
View Related
Nov 13, 2012
Recently I have noticed my internet get slow. I use a comcast cable internet connection that is directly connected to my dlink DR 655. I use the megapath internet speed test [URL] when testing my internet speed. Have a laptop that is usually on wireless and an XP workstation that is connected to the 655 directly with static IP.
I would be browsing the internet and all the sudden the internet would get really slow. This would happen on both my desktop and the laptop and my speed test on both machines would be around .3 Mbps. When this happens I would go and connect the laptop with the ethernet pot directly to the modem. Of course a reboot of the modem has to occur before a connection can be made so once I do that all the sudden my internet is back up to par (12 Mbps). I go ahead and put my network back to the way it was and it all goes back up to 12 Mbps. I have called comcast several times and they are telling me it my router.
This picture shows a snapshot of some windows from the laptop. The CMD ipconfig on the bottom left shows the laptop network settings when connected directly to the modem. The CMD ipconfig on the upper left is the network settings when connected to the router. The web page on the right shows the WAN network settings when the 655 is connected to the cable modem.
Notice the DNS servers, they are different when the 655 is connected to the modem versus when the laptop is connected to the modem. Could this be part of my problem? I have not seen were I can manually change 655 DNS entries ... is there a way to do this? Or should I not even be worried about it?
View 3 Replies
View Related
Dec 26, 2011
I'm using a Dell computer CPU i7 8 gig of ram. It is wired in to the router. Why does it take so long to log into the router and bring up the different pages in the settings. I have never seen a router take so long. I have not updated the firmware version 2.02NA. I have not upgraded it yet. oh I have a cable connection. When I surf the web the pages come-up fast.
View 13 Replies
View Related
Jun 26, 2011
I needed to immediately set a schedule and block IPs, these pages are built into the router.It took forever for the pages to load it took 30 minutes to navigae 5 pages. Every time I try it.Router is good and signal is excellent but the admin router pages to configure are frustratingly slow.As a techie it is anoying, as a customer getting support by the hour spend more on a faster better quillity router were the work can be done in 1/20th of the time it takes on this router.I'd say I have a dud but once setup the router is a great performer if you do not need to admin the router further?
View 3 Replies
View Related
Dec 7, 2009
I am having issues with my freinds new DIR-825 Rev:B1 Firmware:2.02NA, The admin pages are intermittently slow to load and sometimes wont load until I power cycle the device. I am using IE8 on vista x64, and have the issue on all pc's on the network. Is there a work around for this?
View 7 Replies
View Related
Mar 24, 2011
I can't connect to the internet through Google chrome or explorer, pages simply won't load.
-can't ping the pc from other pc but can ping the modem
- internet shows connected and receiving data
- all connections tight
- internet/wireless modem working fine working fine with my other pc/laptop
- all other programs on the pc seem to work fine
- I have changed no settings on the pc since I last used it and the internet
- I had not used the internet in approx 2 months on the problem pc
- I tried turning off the firewall.
- running XP
View 3 Replies
View Related
Mar 22, 2012
I have recently bought a TP Link wireless usb adapter (TL-WN727N). Initially I had some issues with drivers but solved that and my internet was working perfectly for around 2 days. However recently the internet speed has dropped down to extremely low speed periodically for no apparent reason. I can be downloading something at around 700kBps one moment then only have 100B/s the next. [CODE]
View 3 Replies
View Related
Jan 16, 2013
Region : Brazil
Model : TL-WR841ND
Hardware Version : V7
Firmware Version : 3.13.9 (Last)
ISP : NET Virtua
I've bought a TL-WD841ND and was using it normally.
After I arrived from a trip, the internet speed by wireless and by cable is only 0,5~0,7 Mbps...
My internet connection is 10 Mbps, and if I plug direct on the modem, there comes the real speed (9,7 Mbps), but connecting by the router, the speed is 1/20 of what should be. Before my travel i was using it normal, and no one has changed any configuration.
So i've updated to the last firmware avaliable on the website. So i've rebooted it and the "configuration" LED keeps flashing...
I would like to know if this led flashing is normal: (here is a video that i've done: [URL] and what could be happening. ps: connecting by cable, the internet speed is also the same (even after the factory settings reset)...
View 1 Replies
View Related
Mar 17, 2011
I live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
View 3 Replies
View Related
Apr 19, 2012
I have a router Cisco 1901 with 4 links ADSL load balancing, when I activate the links 4, DNS resolution become very slow.
View 3 Replies
View Related
Dec 5, 2011
webpage A will take 1 second to load, and webpage B will take 6 seconds to load. After a browser refresh, webpage A might take 5-8 seconds to load, and webpage B will take 1 second to load.
Hardware rev A1 Firmware 1.13NA
Router is about 2 years old.
I tried resetting the router prior to the firmware update, no different. This is happening on both PC's. I tried a direct connect to the modem, and it seemed to work fine, but this doesn't always happen.
View 13 Replies
View Related
Feb 14, 2011
They all just decide to not load pages fairly often. It happens on my netbook and PC, has been going on for like a year. Formatted each pc at least once since it started. It's really annoying. It's been awhile since I used firefox so I dont remember that error message but Chrome gives me the sad face with the x's in it's eyes and says oops I cannot load the page. On pages that auto refresh it happens ALOT. Once I click the refresh button once or twice it loads it fine. My HTC EVO doesnt have any trouble with the internet when I have it connected to my router. The operating system is Windows 7.
View 11 Replies
View Related
Jan 24, 2011
I'm trying to fix a weird web browsing problem with our Acer Aspire One netbook running XP SP3 I can't get IE or Safari to load web pages but I am connected to our D-Link wireless router and can ping our ISP. Today Windows even downloaded, installed the latest updates and asked to reboot. So I know there is an internet connection and it's working just fine.I have:installed and run AVG and then uninstalled it disabled windows firewall uninstalled everything that wasn't necessary checked the browsers aren't working offline checked for proxy settings in both safari and IE completely reset IE to all of its default settings done a clean boot according to the directions on the MS site url... The log from ipconfig/all and ping google.com are below. [code]
View 5 Replies
View Related
Jan 28, 2013
Let me start with what the problem is. Some pages like google open very fast while some takes a lot of time and sometimes do not load at all.I tried pinging certain websites along with mygame website mabinogi.nexon.net and the request timed out. I tried a few solutions
1) Switched browser and it didn't seem to work (Even the client I use for the game Mabinogi disconnects every 5 to 10 mins)
2) Tried changing the DNS to OpenDNS and it still didn't work
3) Tried using network on safe mode with networking and still I got the same result. That is some pages take a lot of time while others load soon.
View 1 Replies
View Related
Jul 2, 2012
But I seem to have come across a problem that my lack of networking experience wont allow me to fix myself.For some reason for the past few days my net has been acting strange. For instance I can be logged into an MMO but when I try to open chrome or any other browser and do a quick Google search I get DNS errors or just "cannot connect to (website name). Yet i am still online perfectly fine Via MSN,SKYPE,Online games.It doesn't happen all the time just seems to be intermittent. I could be looking at a page and then it will all of a sudden loose connection and it wont load any further.[CODE]
View 14 Replies
View Related
Apr 18, 2012
I have a router Cisco 1901 with 4 links ADSL load balancing, when I activate the links 4, DNS resolution become very slow.
below the router configuration:
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
[Code].....
View 1 Replies
View Related
Aug 15, 2011
I am having a problem with my computer and the internet. I can connect fine and pull up pages but after a while the pages will stop loading. Sometimes it is within a few minutes of using the internet or sometimes it will go a few hours. When I check my connection it shows that I am connected. I have tried troubleshooting, updating IE, trying firefox. Nothing works.
I have a HP G72 Notebook PC Windows 7 IE 9
View 4 Replies
View Related
Aug 4, 2012
Sometimes they load after restarting computer but if you close browser and try open it again they wont load most of the time.Steam has also stopped working and freezes at part where its trying to connect to account. Also "internet" symbol and bottom left corner says two different things at same time:
Network Internet Connection
Network No Internet Connection
Problem has gotten worse by day. First one restart would fix problem but now steam won't work and if you get pages to load after closing browser you need to restart computer couple of times before pages are loading again.
View 1 Replies
View Related
Aug 8, 2012
I am trying to fix my mycomputer, which seems to ok except that it cannot connect to the internet. The connection is wired and works fine (my another computer, next to my computer works well). I have tried another wire connection at local cyber cafe, it worked fine there.
View 13 Replies
View Related
Feb 3, 2013
Since yesterday, nearly every time I load a web page it either doesn't stop loading or sometimes doesn't even load at all. At first I thought that the problem was just with Chrome, but I've since tried Firefox and Explorer and get the same issue. I've tried scanning for viruses, malware and even ran Boostspeed to see if it will solve the problem, but nothing has worked.
I don't know why this has happened all of a sudden, I've not made any significant changes or installed anything new so I'm stumped. I have the fastest fiber optic package my ISP has, so it isn't down to not having enough bandwidth.Can I try resetting my router with the pinhole at the back, or will that cause me to lose settings, which I won't be able to restore ,and not be able to connect to the internet at all? (I know the routers password)
View 1 Replies
View Related
Aug 30, 2011
I cannot connect my laptop to any of the normal wireless networks I use.It says, it's connected with good signal strength but than it never stops "identifying" and doesn't load any pages.
View 4 Replies
View Related
May 26, 2011
I can connect to my mom's wireless network but now all of a sudden I can't get any pages to load. All I get is this page cannot be displayed screen. My computer shows I'm connected with an excellent signal but I can't get any pages to load, I can't even send and receive my e-mail.
View 2 Replies
View Related
Jun 24, 2012
It's Windows 7 laptop that connects to my home wireless network, but won't load any internet pages and just times out. Other old laptops connect to this network (and load pages) just fine. If I take my new laptop to another wireless network - ie McDonalds - it connects and loads pages just fine.
View 3 Replies
View Related
Aug 11, 2011
I've had problems with my net connection at home, Skype is working; at least just for IM, i haven't tried phone / web cam functions, but nothing else will, Firefox / IE can't load any pages, Live Messenger won't sign in, etc etc. I've had a few phone calls with my ISP who ended up running a line test and they insist that everything there end is fine.
[code]....
View 2 Replies
View Related
Sep 16, 2011
have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.
View 4 Replies
View Related
Sep 23, 2012
I have configured a tplink dual wan router + cisco ASA5510.
NET 1---- TP LINK ---- ASA5510 ---- COMPUTERS
NET 2----
The message: this page can not be displayed this showing. Some web pages only load when I click F5.
View 1 Replies
View Related
Jul 11, 2011
I just bought this router. Unfortunately I'm losing close to 3mpbs !
When I was connected directly to the modem i had a little over 12.5 Mbps
Now I'm stuck at 9.5mbps and it won't go higher!
I read a bit over the forum. I tried turning off the QOS but it didn't change a thing.
Here a little extra information;
My internet provider is Cogeco
MY computer is wired
I tried 2 internet tester, both give me the exact same result
View 12 Replies
View Related
Jun 26, 2011
My DIR655 is A4 with firmware v.135.
My normal uplink speed is above 4 Mbps but the speed goes down to 0.4 to 0.8 Mbps. The above unit was received from D-Link as a replacement for the same reason, but it worked for at lease 12 hours.
If the power is OFF/ON cycled, the normal speed comes back but last only about 10 minutes.
View 2 Replies
View Related
