D-Link / Kasda Router - Couldn't Connect To Wireless On Laptop?
Sep 16, 2011
I have an Kasda router connected to my PC. I want to connect Wireless D-Link router to a Kasda router so I can have wireless internet on laptop and on my PC as it is now directly. But I can't seem to manage to get it work. I can catch the signal but it says "No Internet Access". Also I can't enter my wireless router when connected that way, only the normal one. I'm suspecting that I need to configure both routers somehow to get it working. I've tried some other things but no luck.
The first thing I done was this:
PC<->Router<->Wireless Router (Connected them on LAN ports)
Also I've tried:
Router<->Wireless Router(Connected LAN from router to an internet port on Wirless)<->PC(connected lan from wireless to PC). - This way I was able to acces both router from PC, but still couldn't connect to wireless on my laptop.
View 3 Replies
ADVERTISEMENT
Feb 14, 2011
I just bought DIR-655 yesterday and tried to set it up through the CD but without success. My problem at first was I couldn't get internet connect via router (but PC to DSL modem direct connection is always all right). Then I played around to turn on "Advanced DNS service" then I got internet connection via router to my PC. However sometimes the web site names couldn't be translated by DNS correctly and it resulted in "Not Found" and I am pretty sure those web sites are active and running (as I have no problem to access those if I connect DSL modem to my PC directly). Also I noticed wireless connection was very slow and some You Tube videos would stop playing after around 30 seconds and DSL modem had no further activity at all. Why couldn't I use 192.168.0.1 (default IP) as primary DNS (as I got no internet at all if I did so)? Is it really necessary to turn on "Advanced DNS service"? How can I get internet access if I turn "Advanced DNS service" off?
View 4 Replies
View Related
Jan 18, 2013
set up my router. Trying to set up my 3G modem with TP-Link MR3020.
Tried troubleshooting to find out where it went wrong and just couldn't figure out. Just tried disabling the wireless security and *poof* I'm able to connect to the Internet. Right after setting up the Network Key, I can't connect to the Intertnet via my router.
Here are the datas.
Windows IP Configuration
Host Name . . . . . . . . . . . . : TOSHIBAM840
Primary Dns Suffix . . . . . . . :
[Code].....
View 5 Replies
View Related
Feb 25, 2011
I have put two different e4200 routers in my network and both of them have the same issue. I believe there are some major firmware bugs with this router. First of all I set up everything using the web interface. My laptops could connect to the network and internet but any of my devices that use wireless bridges (WET610N) to connect could only get local network access. They could not connect to the internet. After some troubleshooting I found the reason it was not working properly. I used DHCP reservations in my network because of port forwarding and such. Well when the devices connected to the bridges were in the reservation list they were unable to connect to the internet. After I removed them they now are able to get on the internet without a problem. So that is the first problem I've found so far...
The second is I can no longer connect from my Xbox 360 to my Media Center PC. I tried to set up a new connection but this did not work either.
View 9 Replies
View Related
Feb 9, 2012
I bought the E3200 to replace an older Linksys model. The older model worked but the signal was weak throughout the house. I installed the e3200 using the Cisco connect software but it told me that it wasn't sure I was connected to the internet. I wasn't. Showed a strong signal but could not connect via wireless devices or from the cable from the router to the desktop.
I have LUS Fiber service which does not use a modem. I have had them recycle the signal several times and have done tried many different variations of the MAC numbers from ipconfig or from cloning. Have also tried it with the MAC cloning disabled so the router's MAC number is used. I have reset, rebooted and done just about every possible option.
Spoke with my provider many times and they insist they are sending me a signal. They also recognized the router's MAC number on their end.I purchased one router and it wouldn't connect, so I exchanged it. All these shenanigans I have gone through are with the second router because I figured the hardware isn't the problem.
View 1 Replies
View Related
Oct 4, 2011
So, I've had my Linksys E2000 Router for awhile now (not a year old though), and I just discovered a problem with it.Just the other night, not even 8 hours ago, I was playing my 360, everything was fine. I then decided to go to bed, cause it was getting late. Here I am now, I boot my 360 up, and notice that my 360 couldn't connect to Live. At first I thought maybe the cable got unplugged somehow; nope. So I troubleshooted to fiind out that Ethernet Port one no longer works on my router, but switching the cable to port two, my 360 is able to go online.
Does this mean my beloved router, that I paid my hard earned cash for, has decided to start crapping out on me, or is there a fix for this? I take really good care of all my electronics, and my router sits in a spot by itself on my desk with plenty of air space. I have had no issues with this router in the past, until' now. I've always trusted Cisco, and Linksys products, and this really dissapoints me that my router might just be kicking the bucket, at not even a year old. What's the deal Cisco?
View 8 Replies
View Related
Jun 24, 2012
I've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
View 9 Replies
View Related
Oct 24, 2011
I've recently bought a WRT54GL router, and I`m having some problems with it. The original firmware the router came with had a bug, and couldn`t even connect to a PPPOE network. I downloaded the latest firmware version for this model (4.30.14 build 5, Oct. 26, 2009). Now it can connect to PPPOE but the broadband speed is limited to ~ 30Mbits/s. My ISP normally provides a download speed up to 80-90MBits/s, and if I bypass the router, and connect the internet cable directly to my PC, it works.
The QoS is disabled, so this can`t be the problem, but I searched the internet, and I found that it can be because the router`s CPU is too slow and can`t handle connections up to 80-90Mbit/s download speed, but this sounds a little bit weird to me.Did any of you gus run into this problem? Is it a hardware problem, or a software one? Maybe there`s something I need to set up in the admin interface?
View 3 Replies
View Related
Jun 22, 2012
I've recently noticed an issue with the D600. A few days ago, I could not get any IP address from the router (wireless connection) on one of my laptops. I checked the router and it did something never done before: It restarted automatically (orange lights). Everything seemed to work fine but now when one of my device connects to the network (ps3, iPhone, laptops...) no IP address is given by the router so everything is on limited connectivity which is really annoying. I have to turn it off/on to make it work. It happens most of the time.
Note that I already returned the router a couple a year ago or so (I cant recall what was the issue), so I have to say that the quality of this device is far behind my expectations.
View 3 Replies
View Related
Feb 7, 2013
Region : Turkey
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version : (120817)
ISP : turkcell
I have recently purchased the portable TP link 3020 which is a great solution for me in order to get wifi for multiple users till I get through the long process of getting ADSL in Turkey.The thing is that the 3G bundle Turkcell provided me with is not identified by the modem, so I looked it up on the internet and I found out that I needed to add the bin of the bundle, I searched within the list published on TPLINK website but without any luck.... finally I found the bin I was looking for in another country list... mine is Huawei E353 and the one I found is Huawei E353s2. Anyway I added the bin and still not luck identifying the bundle, I finally resorted to upgrade the firmware which I hate because I always worry of the bad consequence of failure, and unfortunately I was right! Once I upgraded the firmware, I couldn't get connected to the router, it keeps asking me for the key, but without any success! I tried hardware reset by holding the WPS button for 5 seconds as suggested in the manual, but any further success!
View 1 Replies
View Related
Nov 12, 2012
This customer has 5 5508 WLC controllers, version 7.0.230.0 with several cisco 1142 and 3502e AP's. All in one mobility domain. Randomly some AP's don't accept clients to connect. Requesting for an IP-address by DHCP on the client (XP).
I just made ssh connection to the AP's, did some debugging. No information. Checked the logging, nothing I wanted to see. Even debug ip packet, give me the insufficient information I want to have.
When we reboot the AP, everything will work fine, but some several weeks later, this AP will have the same problem again. The capwap tunnel still exists, I could ping, telnet/ssh the AP. Even when a user tries to connect, I don't see any authentication debug messages.
This AP exists in a clean room environment, but is sometimes happens with an AP in a open office space.
Logging a tac case is not an option, due to the lack of debug output I receive.
View 4 Replies
View Related
Feb 26, 2013
Who is trying the ping www.dlink.com ? I have been used the model DIR-825 during 1 year, but I could not see that ping command in the log. I had experienced that my notebook alert that DIR-825's shareport has reconnected. Why the DIR-825 lost the private connection while I sleeping?Comment: DIR-825(IP: 10.10.100.97/28) is private using only. The internet gateway is setting to DIR-655(:192.168.90.97/29). [code]
View 1 Replies
View Related
Dec 14, 2011
I have about 50m between switches. When using Cat6 I could not get a connecting between switches but when I use Cat 5E I get a connection. The switches are D-Link DGS-1210-10P switches. Why do the Cat6 which is suppose to be superior to Cat 5 not getting a connection.
View 1 Replies
View Related
May 11, 2011
Okay, so our old computer took a dump & our friend rebuilt us a new one and he threw in a new router to go with it. Its a D-Link router, which is directly connected to our desktop. However, upon completion of a new desk installment, we put the router into the cabinet and my gateway laptop immediately stopped being able to connect to the internet or the router at all.
1) The router is connected to the internet and broadcasting.
2) I've reset and refreshed the router and my window of available networks on my laptop, which did not work.
3) I've pulled it out of the cabinet, which also had no affect.
4) I did a manual search for the router, and it says the network already exists and asks if i would like to connect and upon agreeing to this, it returns me to the page of available networks, which does not include my router.
View 11 Replies
View Related
Aug 5, 2012
I changed the router ip to 192.168.0.2 from 192.168.0.1. I don't know what type of connection, i have to use. It have the following options: Static IP, DHCP etc. The internet connectivity status shows 'disconnected'.I'm currently using the lan to connect to net. ISP gave me a username and password to Login with a browser to start browsing. Since multiple devices are use in same connection, they provided 2 IP.
View 1 Replies
View Related
Jan 8, 2012
I have recently moved and I brought my wireless router with me from my last home. The wireless router is a D-Link DIR-615 Wireless N Router. I reconfigured the router with a new connection name, password and security key. Upon trying to connect to the wireless network once it was fully reconfigured (no problems reconfiguring whatsoever), I was getting the "Windows was unable to connect" message. Since then, I have been able to connect successfully to the network with an iPod Touch, Xbox 360, Playstation 3 and my roommate's laptop. I have tried resetting the router and modem with no success. I can see the wireless network in the available connections list and other networks in my area. I can also connect to the internet through this router manually using an ethernet cable (which I am doing now, to post this message). I submitted my computer's specs using the SysInfo app given at registration.
I will also include an IPCONFIG /ALL as I have seen this requested in other threads like this one. These are the results of that: (note: this was run while connected through the wireless router using an ethernet cable)
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kalmah
Primary Dns Suffix . . . . . . . :
[Code].....
View 8 Replies
View Related
Jul 29, 2012
i got a Dir-615 N300 few days ago...and it took me 2 days to make the wireless network and connect my HP Laptop to it...now my cousin wanted to use my wireless and couldn't...spent like 3 hours trying different things and nothing...
Basicly...she can see my SSID,but when she tries to connect...it doesn't work...it just...loads...it doesn't ask for the password or anything...
A friend told me that i might have to give her acces in some way... I have no idea what i did but it worked for my laptop.
Few Details:
My cousins laptop is an Acer with Xp SP2 i think...(while mine is HP with Windows 7)
Security mode WPA-Personal
Cipher Type: AES
Hardware Version: Hx
Firmware Version: 8.02
btw i did everything on the http link...not the cd...for some reasons the cd didn't work for me
View 3 Replies
View Related
May 12, 2011
i was setting up my friends new router (Lynksys WRT54GL) and i figured out the ip address and it was DCHP(i think) enabled so i just enabled that on the router settings and then i tried to finish the setup with the disc that came in the box and it kept saying it couldnt connect to the internet.-SO-we disconnected the router and connected to the internet and suddenly, no connection to internet. it was working earlier today but for some reason now it no longer has connection. waited around for 3 hours and still no connection, through router or direct link.
View 3 Replies
View Related
Mar 11, 2013
Couldn't connect to mobile hotspot but could connect to other networks, none of which were from a phone. When attempting to connect to hotspot, my phone displays the information of my computer as name unknown, IP address 0.0.0.0, but gives a MAC address. (My computer has a name, I can't find my IP address, idk what a MAC address is)I tried using remote desktop connection, but the computer I was trying to connect to couldn't find mine.
To be honest, I'm not sure I did it correctly, though.Displayed as 0.0.0.0 on phone when attempting to connect to mobile hotspot.I typed ipconfig in command prompt but got nothing about an IP address. There were several lines that began with "Tunnel adapter" all followed by "Media State : Media Disconnected" then "Connection-specific DNS Suffix: I currently have no internet connection (I'm on my phone), so I can't find it that way either.
Under Network Location it specifies that it cannot connect to MEMORYCARD (\EPSON00) (Z:) and upon clicking on it I receive an error message: "Microsoft Windows Network: The network path was not found. This connection has not been restored."I've spilled water on my keyboard before, but this took place after these problems arose. I dried the computer and had it sit with rice for 2 days. The only issue that came of this incident that I am aware of was a few stuck keys.
View 2 Replies
View Related
Mar 29, 2013
Region : Indonesia
Model : TD-W8151N
Hardware Version : V3
Firmware Version :
ISP :
Recently I bought TD-W8151N wireless adsl router, I have one desktop computer that connected to TD-W8151N via ethernet and wirelessly to one laptop, IP Addr: 192.168.1.4, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : desktop (LAN connection IP Addr: 192.168.1.3, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : laptop (wireless connection) but I can't ping each other and also can't access the share folders between them., both computers can access internet. Is there anything I missed the configuration setting of the router? Before I use wireless, I connected this 2 computers using cross-type utp cable, and working good.
View 5 Replies
View Related
Nov 4, 2012
Region : India
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120418 Rel.34102
ISP :
Everytime, I turn on the ADSL2+ wireless modem router, it connects to the internet and my laptop gets paired with the wireless network but after 30 mins time, wireless ADSL2+ router restarts itself and goins in a loop for nearly 5 times and then it gets connected to internet but then I cannot connect my laptop to the the router using wireless with error DHCP failed to assign IP but DHCP is enabled in the router. This has started since a month and I had tried several network change settings but nothing has given me a solution. I do use Kaspersky IS through which the connection flows in. My internet setting is set to use Automatic DNS discovery and most time, I get RC 102 DHCP error.
View 4 Replies
View Related
Jan 30, 2011
We have 6 brnaches configured with NAC Module in Cisco 2821 ISR router. The WAN link being used to connect all the branch to the HQ CAM is via WIMEX wireless Broadband. The bandwidth is 2MB.OOBVG is the mode used. All branches were working well last 1 year. Last month it is suddently disconnected from the CAM.I opened the TAC. Cisco history of TAC experience, We have total 6 TAC enginners tried one by one still the problem not resolved. The following are the findings
1. Timing is accurate between CAS-CAM
2. Shared secret key correct
3. SSL temp certificate ok also image being used it 4.6.1.
4.Tcpdump from both CAM and shows some initial packet drops of 10 sec with the below CAM log
I believe that NAC is not a matured products and the problem like this even by Cisco TAC can not solve.
View 1 Replies
View Related
Nov 23, 2010
I was trying to remotely command my iTunes library via an iPhone app called Remote. It worked for some times with an intermittent disconnection problem due to the iPhone locking. But even after unlocking the phone and reconnecting the Wi-Fi, Remote couldn't find my iTunes library again and my only workaround was to relaunch iTunes on the PC (which is Ethernet-wired to my router). Few days ago nothing worked!!! I could no more get Remote to find iTunes.
I could not find a solution even by rebooting the router or unplugging the PC's Ethernet cable. Last night I powered off the router and after 10s I powered it on again. And then it worked!I highly suspect a problem between my router and Bonjour which is as UPnP, an Apple protocol for discovering communicating devices. Discovery phase being usually done with broadcast frames, something goes wrong in the router with processing the broadcasts, or is it a Bonjour problem?Please note that even now that Remote can find iTunes, I still have my old intermittent disconnection problem.So is there any incompatibility between WRT-610N and Bonjour and what is the fix ?
View 3 Replies
View Related
Feb 7, 2012
I have a wireless laptop that works with the D-Link 524 but when I went to a D-Link 655 it wouldn't work and I have 3 computers on Ethernet and my Roku works but after 4 hours with D-Link Tech support it still can't connect to the Internet wireless but is ok with Ethernet. I have another laptop that works with this router on wirerless also. Could it be the labtops internal adapter.
View 4 Replies
View Related
Mar 2, 2011
i use time warner cable for many year and now it have a problem with " couldn't find a network " i try many way but still no work . 1 i do pull the plug off and plug in ( usually it works ) 2 i brought a new router ( still " not able to find network " ) 3 i plug direct computer to the modem and it work but dns doesn't work
View 1 Replies
View Related
Jun 17, 2011
I just got this router and it is working with my pc. wireless internet, however is not working despite trying to connect through a USB drive. My laptop which is what i'm trying to connect to the internet from is not picking up my server, and i'm wondering if the problem is that I have not used the cd that came with the router. My laptop does not have a cd drive and I do not have a portable drive to connect it to.
View 1 Replies
View Related
Aug 18, 2011
Toshiba laptop will not connect to wireless router. Toshiba laptop was working on wireless network yesterday.New modem/router installed today. Laptop will not connect.It finds the network but will not connect, stating time out has occurred.All other computers in house are connecting to network with no problem. Running Windows Vista. Have rebooted modem, rebooted computer.Even plugged computer in directly to modem and it connects fine but will not connect wirelessly.
View 1 Replies
View Related
Mar 14, 2011
Im having trouble connecting to a wireless router. It shows up as an in range router but when I try and connect after entering my wpa password it just acts like it's going to connect but then never does. Doesn't even attempt to aquire an ip. I attached my computer directly to the netgear router and that worked fine but still no wireless!! My computer is a dell running windows xp service pack 3
View 3 Replies
View Related
Sep 27, 2011
After finally getting my wireless and wired routers to play nice together, I now find that my laptop won't connect. I know the wireless router is working fine, because my hp touchpad connects no problem.Lap is a dell inspiron m5030 with windows7 x64 on it.It's brand new, but I removed the dell stuff and installed win7 ultimate, as I already owned it. (and I have a thing about stuff that comes bundled...don't like...but it came that way.)I have all the drivers installed but I can't seem to even see my router.
View 14 Replies
View Related
Nov 14, 2012
I just move to a new place and find out only me can't connect to the wireless router.This laptop can connect to other wireless routers but not this one.My other laptop and cellpone can connect to the router successfully(so I'm sure the code is right, and the router dosen't set any MAC filter).I've tried to reinstall the driver of my wireless card, and still not work.
View 1 Replies
View Related
Aug 15, 2011
how can I connect my laptop to anyone's wireless router to use their internet.
View 1 Replies
View Related
Jan 29, 2013
My laptop wont connect to the internet, it dosent even show my provider to connect with, however it works fine when connected by eternet cable to my router..
View 2 Replies
View Related
Dec 8, 2012
My LAN PC is connected with the router through wire. My laptop is wireless which is connected to the modem. I want to acces the file from the wired PC to wireless Laptop. Both are connected with router.My PC ip is 192. 168.1.205My laptop ip is 192.168.1. 204My router static ip is 192.168.1.136How to connect the LAN Pc from wireless LAptop through Modem.
View 3 Replies
View Related
