Couldn't Connect To Mobile Hotspot But Other Networks Fine
Mar 11, 2013
Couldn't connect to mobile hotspot but could connect to other networks, none of which were from a phone. When attempting to connect to hotspot, my phone displays the information of my computer as name unknown, IP address 0.0.0.0, but gives a MAC address. (My computer has a name, I can't find my IP address, idk what a MAC address is)I tried using remote desktop connection, but the computer I was trying to connect to couldn't find mine.
To be honest, I'm not sure I did it correctly, though.Displayed as 0.0.0.0 on phone when attempting to connect to mobile hotspot.I typed ipconfig in command prompt but got nothing about an IP address. There were several lines that began with "Tunnel adapter" all followed by "Media State : Media Disconnected" then "Connection-specific DNS Suffix: I currently have no internet connection (I'm on my phone), so I can't find it that way either.
Under Network Location it specifies that it cannot connect to MEMORYCARD (\EPSON00) (Z:) and upon clicking on it I receive an error message: "Microsoft Windows Network: The network path was not found. This connection has not been restored."I've spilled water on my keyboard before, but this took place after these problems arose. I dried the computer and had it sit with rice for 2 days. The only issue that came of this incident that I am aware of was a few stuck keys.
View 2 Replies
ADVERTISEMENT
Jun 11, 2011
I just purchased a T-Mobile hotspot (ZTE) yesterday. It can connect to the T-Mobile network and appears to be working fine. My Wii can connect wirelessly to the the hotspot, but my laptop can only connect to the internet through the USB cord (which it's really not supposed to, because that's supposed to be for charging the device). When I try to connect via wifi to my hotspot, my computer can detect the network. However, after I immediately enter my password, it says that it cannot connect. When I click "Diagnose the problem" it says there was a timeout.I have Windows Vista and one of the tech support people mentioned that Windows Vista sometimes has problems connecting with handshake devices (but he didn't know how to fix it). Another person said I should have about 20 seconds to type in my password, so it shouldn't be timing out so quickly. Is it something with my computer? I have a Compaq Presario CQ60. I had this same problem when I tried to connect to a friend's hotspot a couple weeks ago (I don't remember if it was also T-Mobile or another provider, though).
View 8 Replies
View Related
Apr 14, 2012
I recently found out my laptop (Windows Vista)...cannot connect to secured networks. I was to connect to router using ethernet cable before, then i can connect to an unsecured network just fine..i remember that 2 years ago i can connect to secured networks...
i can't provide the name or brand of the router since it is owned by the landlord and only provided me with the password
View 1 Replies
View Related
Sep 6, 2012
I'm living in Australia for a few months and my accommodation does not have a phone line, so I've been using mobile broadband dongles instead. This worked fine until recently, when I abruptly became unable to access the internet. The laptop recognises the dongle and seems to connect, but the download/upload speeds are at a constant zero bytes per second (I have tried to ping Google while 'connected' but received no response). I have tried two dongles from Dodo and one from Telstra, with the same results. Initially, I assumed that this was simply due to signal strength, but each of the three dongles I have tested work fine on another laptop in the same location (I'm using one of them to post this). I have also tried using the dongles with my laptop in other locations, including the city centre, but with no success.
Also, I seem to be unable to connect to any wireless networks (e.g. McDonalds wifi) - the laptop detects the network ok, and seems to be connected, but I am unable to access any web pages etc. In the Network and Sharing Centre, the laptop is connected with the wifi network, but the wifi network does not seem to be connected to the internet. I'm unsure if this is related to the above problem, however.Like I say, everything seems to have been working fine up until about a week agoIf
View 4 Replies
View Related
Jul 26, 2011
I found a demo that shows you how to use the fastest mobile wifi hotspot ZTE MF60,and connect ZTE V9 Light Tablet to MF60 by Wi-Fi smoothly.
View 1 Replies
View Related
Jul 1, 2012
First off I live in the back 40's. I'm surpised I even get a connection here but I do. For most of the winter my internet was decent (edge) connected. Very rarely did I get a disconnect but it did happen. Wasn't high speed but it was alright. Then as summer started my internet started cutting out a lot. Lots of dc's and sometimes no connectivity at all. It would be down almost all day for days on end. I bought an antenna for the device. The antenna however only worked for the signal. It did not work with the outages. I'm sometimes getting 4g signal with 2-4 bars and still no internet connectivity. I updated the firmware today. That increased the signal a little bit.
View 1 Replies
View Related
Jan 22, 2013
I have an HP 8710 Workstation laptop running WindowsXP that just recently starting having problems maintaining an internet connection with my ATT Elevate mobile hotspot. My internet connection will work for 1-2 minutes and then end up timing out. I then have to disconnect and then reconnect to the wireless network to get connectivity. I was using was my laptop's built-in wifi card (Intel Wireless WiFi Link 4965AGN) when this was occurring, then switched to a wifi adapter (Linksys AE1000) and still the problem persists. I contacted ATT and they checked the cell towers, nothing is wrong and everything seems to be working. I've tried upgrading all the drivers, still no success.
View 1 Replies
View Related
Jun 18, 2012
We have an ASA5520 configured with a IPSec VPN, from any ADSL home/office our VPN clients can connect without any problem, but when we use our cellular phones in tetering mode (as an accesspoint) our VPN clients are impossible to connect. Same machines,same software, same operating system, same remote IP (ASA5520 external IP) only change Wifi connection (ADSL to cellular phone). The signal of cellular phones is not the problem we was doing the tests with different phones (IPHONE & ANDROID), different locations (all in spain) and differents providers (vodafone, orange and movistar) of internet by cellular phone.We think that perhaps the problem is the licenses that our ASA5520 has..
Our ASA5520 comes with this licenses:
------------------------------------------------------------------------------------------
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 150 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
[code]....
View 8 Replies
View Related
May 12, 2011
i was setting up my friends new router (Lynksys WRT54GL) and i figured out the ip address and it was DCHP(i think) enabled so i just enabled that on the router settings and then i tried to finish the setup with the disc that came in the box and it kept saying it couldnt connect to the internet.-SO-we disconnected the router and connected to the internet and suddenly, no connection to internet. it was working earlier today but for some reason now it no longer has connection. waited around for 3 hours and still no connection, through router or direct link.
View 3 Replies
View Related
Feb 14, 2011
I just bought DIR-655 yesterday and tried to set it up through the CD but without success. My problem at first was I couldn't get internet connect via router (but PC to DSL modem direct connection is always all right). Then I played around to turn on "Advanced DNS service" then I got internet connection via router to my PC. However sometimes the web site names couldn't be translated by DNS correctly and it resulted in "Not Found" and I am pretty sure those web sites are active and running (as I have no problem to access those if I connect DSL modem to my PC directly). Also I noticed wireless connection was very slow and some You Tube videos would stop playing after around 30 seconds and DSL modem had no further activity at all. Why couldn't I use 192.168.0.1 (default IP) as primary DNS (as I got no internet at all if I did so)? Is it really necessary to turn on "Advanced DNS service"? How can I get internet access if I turn "Advanced DNS service" off?
View 4 Replies
View Related
Nov 12, 2012
This customer has 5 5508 WLC controllers, version 7.0.230.0 with several cisco 1142 and 3502e AP's. All in one mobility domain. Randomly some AP's don't accept clients to connect. Requesting for an IP-address by DHCP on the client (XP).
I just made ssh connection to the AP's, did some debugging. No information. Checked the logging, nothing I wanted to see. Even debug ip packet, give me the insufficient information I want to have.
When we reboot the AP, everything will work fine, but some several weeks later, this AP will have the same problem again. The capwap tunnel still exists, I could ping, telnet/ssh the AP. Even when a user tries to connect, I don't see any authentication debug messages.
This AP exists in a clean room environment, but is sometimes happens with an AP in a open office space.
Logging a tac case is not an option, due to the lack of debug output I receive.
View 4 Replies
View Related
Sep 16, 2011
I have an Kasda router connected to my PC. I want to connect Wireless D-Link router to a Kasda router so I can have wireless internet on laptop and on my PC as it is now directly. But I can't seem to manage to get it work. I can catch the signal but it says "No Internet Access". Also I can't enter my wireless router when connected that way, only the normal one. I'm suspecting that I need to configure both routers somehow to get it working. I've tried some other things but no luck.
The first thing I done was this:
PC<->Router<->Wireless Router (Connected them on LAN ports)
Also I've tried:
Router<->Wireless Router(Connected LAN from router to an internet port on Wirless)<->PC(connected lan from wireless to PC). - This way I was able to acces both router from PC, but still couldn't connect to wireless on my laptop.
View 3 Replies
View Related
Feb 25, 2011
I have put two different e4200 routers in my network and both of them have the same issue. I believe there are some major firmware bugs with this router. First of all I set up everything using the web interface. My laptops could connect to the network and internet but any of my devices that use wireless bridges (WET610N) to connect could only get local network access. They could not connect to the internet. After some troubleshooting I found the reason it was not working properly. I used DHCP reservations in my network because of port forwarding and such. Well when the devices connected to the bridges were in the reservation list they were unable to connect to the internet. After I removed them they now are able to get on the internet without a problem. So that is the first problem I've found so far...
The second is I can no longer connect from my Xbox 360 to my Media Center PC. I tried to set up a new connection but this did not work either.
View 9 Replies
View Related
Feb 9, 2012
I bought the E3200 to replace an older Linksys model. The older model worked but the signal was weak throughout the house. I installed the e3200 using the Cisco connect software but it told me that it wasn't sure I was connected to the internet. I wasn't. Showed a strong signal but could not connect via wireless devices or from the cable from the router to the desktop.
I have LUS Fiber service which does not use a modem. I have had them recycle the signal several times and have done tried many different variations of the MAC numbers from ipconfig or from cloning. Have also tried it with the MAC cloning disabled so the router's MAC number is used. I have reset, rebooted and done just about every possible option.
Spoke with my provider many times and they insist they are sending me a signal. They also recognized the router's MAC number on their end.I purchased one router and it wouldn't connect, so I exchanged it. All these shenanigans I have gone through are with the second router because I figured the hardware isn't the problem.
View 1 Replies
View Related
Oct 4, 2011
So, I've had my Linksys E2000 Router for awhile now (not a year old though), and I just discovered a problem with it.Just the other night, not even 8 hours ago, I was playing my 360, everything was fine. I then decided to go to bed, cause it was getting late. Here I am now, I boot my 360 up, and notice that my 360 couldn't connect to Live. At first I thought maybe the cable got unplugged somehow; nope. So I troubleshooted to fiind out that Ethernet Port one no longer works on my router, but switching the cable to port two, my 360 is able to go online.
Does this mean my beloved router, that I paid my hard earned cash for, has decided to start crapping out on me, or is there a fix for this? I take really good care of all my electronics, and my router sits in a spot by itself on my desk with plenty of air space. I have had no issues with this router in the past, until' now. I've always trusted Cisco, and Linksys products, and this really dissapoints me that my router might just be kicking the bucket, at not even a year old. What's the deal Cisco?
View 8 Replies
View Related
Jan 18, 2013
set up my router. Trying to set up my 3G modem with TP-Link MR3020.
Tried troubleshooting to find out where it went wrong and just couldn't figure out. Just tried disabling the wireless security and *poof* I'm able to connect to the Internet. Right after setting up the Network Key, I can't connect to the Intertnet via my router.
Here are the datas.
Windows IP Configuration
Host Name . . . . . . . . . . . . : TOSHIBAM840
Primary Dns Suffix . . . . . . . :
[Code].....
View 5 Replies
View Related
Jan 30, 2011
We have 6 brnaches configured with NAC Module in Cisco 2821 ISR router. The WAN link being used to connect all the branch to the HQ CAM is via WIMEX wireless Broadband. The bandwidth is 2MB.OOBVG is the mode used. All branches were working well last 1 year. Last month it is suddently disconnected from the CAM.I opened the TAC. Cisco history of TAC experience, We have total 6 TAC enginners tried one by one still the problem not resolved. The following are the findings
1. Timing is accurate between CAS-CAM
2. Shared secret key correct
3. SSL temp certificate ok also image being used it 4.6.1.
4.Tcpdump from both CAM and shows some initial packet drops of 10 sec with the below CAM log
I believe that NAC is not a matured products and the problem like this even by Cisco TAC can not solve.
View 1 Replies
View Related
Nov 10, 2012
I recently bought a mobile hotspot for my new start-up business (rather than paying for multiple internet locations) but I can't connect with my laptop--I'm really trying to avoid buying a newer laptop because my funds are limited right now.My iphone and PS3 can connect to the hotspot and run fine without any problems. The laptop can connect to my hotspot BUT the internet wont connect, it just says 'unidentifiable network'.
View 7 Replies
View Related
Jun 24, 2012
I've recently purchased a Linksys EA4500 router. I've got home, I've used the installation guide CD thingy, connected 3 of my laptops wirelessly, no issue there.However when I tried to connect my 4th laptop problems came along. The problem I was dealing with was that I couldn't connect to the router. I mean I could see the network name appearing in the list, but when I tried to connect the network would just dissapear from the list, not connect, and wouldn't back on the list unless I've reset the laptop. Anyhow I've ignored that computer because I thought it was two years old and it might have had a wireless network adaptor issue, although it was conneting with no problem to my former router D-Link DIR 365.Anyway, just yesterday I've purchesed a brand new netbook (Evolio U9) and it doesn't see my router, although it sees all the other connection availables (my neighbors' wirless networks), I even connected to one of them just to test if anything was wrong with the netbook.
I also have problems when trying to connect with an Iphone 4. Well, it does connect, but the connection to the iphone just goes on and off making it impossible to use. It's really strange that all the 3 Iphones in my home have no issue connecting, not even my Glaxy S3, nor any of the Smart Tvs, nor the printer.Does the router have any number of limited connections available? The router configuration is the ones done from the CD. I've only assign a SSID and a WPA password.Please note that all the computers above are GENIUNE Windows
View 9 Replies
View Related
Aug 2, 2012
We are having issue on our internet connection, before our Access Points you can use it without any problem... but now you need to put ip on the device so you can access to the internet, added info we are using Antamedia Hotspot Software installed.
View 6 Replies
View Related
May 16, 2012
I have an emachines desktop computer and a Verizon mifi wireless hotspot. How do I connect my hotspot to my computer?
View 2 Replies
View Related
Dec 9, 2012
My only options for internet have been 56k or wireless USB modems. That is, until recently. We switched from the wireless USB modems to a wireless hotspot from US Cellular (Samsung SCH-LC11). However, ever since making the switch I've had problems accessing certain websites both on our PC and on my Macbook Pro. I can't connect to Invision Free (or any of its user-created forums) or [URL]. It happens with other, random sites as well. I tried manually changing DNS settings to Google's and another one (don't recall which) and it did allow me to access the site. However, once there, every other site started moving slowly and eventually the ones in question timed out as well.
View 12 Replies
View Related
Jan 4, 2011
how to connect Hotspot shield automatically on startup of Windows xp By checking the option to show on startup it starts on the tray but doesn't connect Is there a command line or something to do to connect it automatically ?
View 7 Replies
View Related
Oct 24, 2011
I've recently bought a WRT54GL router, and I`m having some problems with it. The original firmware the router came with had a bug, and couldn`t even connect to a PPPOE network. I downloaded the latest firmware version for this model (4.30.14 build 5, Oct. 26, 2009). Now it can connect to PPPOE but the broadband speed is limited to ~ 30Mbits/s. My ISP normally provides a download speed up to 80-90MBits/s, and if I bypass the router, and connect the internet cable directly to my PC, it works.
The QoS is disabled, so this can`t be the problem, but I searched the internet, and I found that it can be because the router`s CPU is too slow and can`t handle connections up to 80-90Mbit/s download speed, but this sounds a little bit weird to me.Did any of you gus run into this problem? Is it a hardware problem, or a software one? Maybe there`s something I need to set up in the admin interface?
View 3 Replies
View Related
Aug 28, 2011
Anyway, I have a Toshiba Satellite L645D-S4056 with Win7 Home Premium 64-bit. I've had it almost a year now and have never had trouble connecting to public wifi.Recently, I moved into a new apartment with free wifi and I seem to catch the signal from my apt even though it is poor. Every time I try to connect with my Toshiba it says, "Windows is unable to connect to 'linksys'." However, my husband's HP laptop and my old eMachines laptop (7yr old) (which I am using to research the problem) can connect with absolutely no issues. When I go to the clubhouse, my Toshiba can connect, however it cannot identify the network and does not receive an actual internet connection.
So far, I have uninstalled/reinstalled and updated my network adapter (Realtek RTL8188CE), I've used Command Prompt ipconfig /reset and ipconfig /release along with several other commands suggested to other wifi connection problemsI've checked my DHCP and DNS to ensure they're enabled.As for firewalls, I have turned off windows firewall and have disabled Kaspersky protection, however I have yet to uninstall and reinstall, this being because I can connect to a password prompted internet connection at work.I am unsure how to check my IP address or any of that
View 2 Replies
View Related
Aug 24, 2012
I am using an IPhone 4 as a hotspot to wirelessly connect my pc to the internet using a medialink wireless USB adapter. It says I am connected the IPhone says I am connecte3d but when I click on internet explorer it says web page not available.
View 2 Replies
View Related
Nov 26, 2012
I have a 4g hotspot with no places to connect a cable, etc. I wanted to know if and how i can get a Netgear WGR514 router to pick up the 4G signal. I need this router because I have some other equipment that i need to connect that does not accept wireless signals.
View 1 Replies
View Related
Jan 7, 2013
i am using internet in my office where some websites are blocked like FB.in my office proxy server is being used.i download the portable hotspot shield to use FB. but i did not connected. During the time, when hotspot maintaining connection a msg has been written "waiting for the response from secure server."
View 2 Replies
View Related
Jun 1, 2011
I have an HP laptop running Windows XP almost five years old which contains an Intel Pro Wireless 3945ABG network device. It connects fine with my router WiFi running off DSL. I recently bought an iPhone 4 and set it up as a personal hotspot. I've been able to connect a friend's Macbook to it. But even though my HP laptop sees the iPhone network, when I try to connect to it I get "Unable to connect to this network. It may be out of range." I've downloaded the current update for the wireless device.
View 1 Replies
View Related
Jan 20, 2012
1st. I have a desktop and nearby there is wireless internet WiFi hotspot. How can I connect it to the wireless internet WiFi? I am thinking of buying this: http:[url]....Apart from that adapter do I need something else?
2nd. Where the desktop is, I have no reception. I mean because my cellphone has no reception when it is in the same place where the desktop is. But when I put my cellphone in the window around 12 feet away, there is reception. So I am wondering if I can make a 12 feet long USB cable from the desktop to the window and with the Wifi/WLAN Wireless Network USB Adapter in the window.
View 5 Replies
View Related
Feb 7, 2012
I am trying to use a MIFI hotspot for the internet, I have a wifi laptop, and a wifi printer.I would like to print wirelessly from my laptop and use the internet at the same time, but I can't. To print I have to go to my wireless network and switch to my router. And if I want to use the internet I have switch my wireless network back to the MIFI hotspot.
View 3 Replies
View Related
Jul 13, 2012
Where I live there is no DLS or cable to probide me with Interent access so I use my Verizon 3G/4G smart phone (Android) as a hotspot. Right now I am using an old Vista PC and ICS (Internet Connection Sharing) to provide Interent connectivity to my home network and Cisco lab. This works fine but I must have my smart phone near the PC for it to work. When I go to other rooms, I end up missing calls and texts since I have t oleave the phone if it is providing Inerent access at that time. If I can get the Airnet's to connect to the hot spot AND provide Internet access, that will provide me additional mobility. This would also be good for small businesses as a backup Internet Connection.
Is there any way that I could elimanate the Vista PC and have my Aironet 1231G Wireless router(s) automatically connect to my phone's 3G hotspot to provide Internet access to my lan?
I have 2 Airnoet 1231G's running the c1200-k9w7-mx.123-7.ja IOS and a C3550XL layer 3 switch.
View 5 Replies
View Related
Mar 8, 2013
I cannot get my Dell Laptop Inspirion c to connect to Iphone Hotspot. Is there s setting I need to change? My spouse's Dell laptop connects to Iphone hotspot without any trouble. I've restarted several time, it shows that it's connected, google will come up for a minute and then nothing.
View 1 Replies
View Related
