Cisco Wireless :: Connect Aironet 1231G To 3G Hotspot

Jul 13, 2012

Where I live there is no DLS or cable to probide me with Interent access so I use my Verizon 3G/4G smart phone (Android) as a hotspot.  Right now I am using an old Vista PC and ICS (Internet Connection Sharing) to provide Interent connectivity to my home network and Cisco lab.  This works fine but I must have my smart phone near the PC for it to work.  When I go to other rooms, I end up missing calls and texts since I have t oleave the phone if it is providing Inerent access at that time.  If I can get the Airnet's to connect to the hot spot AND provide Internet access, that will provide me additional mobility.  This would also be good for small businesses as a backup Internet Connection.
Is there any way that I could elimanate the Vista PC and have my Aironet 1231G Wireless router(s) automatically connect to my phone's 3G hotspot to provide Internet access to my lan?
I have 2 Airnoet 1231G's running the c1200-k9w7-mx.123-7.ja  IOS and a C3550XL layer 3 switch.

View 5 Replies


Cisco Wireless :: Pass Thru DHCP With Aironet 1231G

Jul 1, 2012

We have 12 - AP-1231G access points in our warehouse with 2 SSID's, both on different VLAN's. We would like to set one of the VLAN/SSID 's to use DHCP from a windows DHCP server.Is this possible to do with option 43 or is that only for lightweight AP's ? Sho ver: Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8).

View 2 Replies View Related

Cisco Wireless :: Aironet 1231G - Missing Channel Command?

Jun 14, 2011

I have two Aironet 1231Gs, that are both running the same version of fimware: Version 12.3(8)JEE
From the gui, I try and change the channel on the main radio interface--It works from one, and I get just a blank page on the other.  When I try and change it via the cli, I use the "channel" command in conf int mode, and it works one the one, but the other one, the "channel" command doesnt exist.

View 1 Replies View Related

Cisco Wireless :: Aironet 1231G - Cannot Access Default Username And Password

Jan 3, 2013

I am resetting my Aironet 1231-G access points and cannot access the default username and password.  Here is the information I am getting on the Console.  I reset getting the amber light.  Attempt to use Cisco as the Username and Password.  It replies that authentication fails with the below log information.

*Mar  1 00:00:04.591: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed*Mar  1 00:00:05.868: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0*Mar  1 00:00:05.969: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1025 messages)
*Mar  1 00:00:06.104:  status of voice_diag_test from WLC is false*Mar  1 00:00:07.156:  STUB Called : crypto_ssl_init*Mar  1 00:00:08.198: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up*Mar  1 00:00:08.244: %SYS-5-RESTART: System restarted --Cisco IOS Software, C1200 Software (C1200-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)Technical [URL] Copyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Wed 13-Apr-11 12:55 by


View 2 Replies View Related

Cisco Aironet AP 1231G Mount With Magnet

Nov 22, 2011

I need to install a AIR-AP1231G in one of our facilities. Its desired location is on a 1" thick solid steal wall filled with concrete. I thought maybe mounting it with a magnet would be easier than tap and die. Any reason I shouldn't use a high powered magnet to mount it with?

View 3 Replies View Related

Cisco :: Change WPA2 Key On Aironet 1231g Access Point?

Mar 22, 2012

I am trying to change wpa2 key on an Aironet 1231g access point. Once I change they key, clients cannot authenticate to the access point unless they either change the password or forget and re add the network on the client device. Is there any way to make the client ask for a new key if the key doesn't match when authenticating?

View 4 Replies View Related

Cisco :: Clients Will Not Connect To 1231G AP?

Sep 6, 2011

I bought 3 of the Aironet 1231g access points and cannot get any clients to connect to them.  I have tried everything from an Iphone, Droid2, Win 7 and XP laptops with built in wireless G cards. All say that they cannot connect to the wireless network. I have two setup currently, one on Vlan 1 that I have configured the way I want with WPA2 enterprise. The other one is just one I setup while playing around.

View 4 Replies View Related

Connect Wireless Hotspot To Computer?

May 16, 2012

I have an emachines desktop computer and a Verizon mifi wireless hotspot. How do I connect my hotspot to my computer?

View 2 Replies View Related

Can't Connect To Certain Sites Via Wireless Hotspot

Dec 9, 2012

My only options for internet have been 56k or wireless USB modems. That is, until recently. We switched from the wireless USB modems to a wireless hotspot from US Cellular (Samsung SCH-LC11). However, ever since making the switch I've had problems accessing certain websites both on our PC and on my Macbook Pro. I can't connect to Invision Free (or any of its user-created forums) or [URL]. It happens with other, random sites as well. I tried manually changing DNS settings to Google's and another one (don't recall which) and it did allow me to access the site. However, once there, every other site started moving slowly and eventually the ones in question timed out as well.

View 12 Replies View Related

Intel / Pro Wireless 3945ABG Won't Connect To IPhone Hotspot?

Jun 1, 2011

I have an HP laptop running Windows XP almost five years old which contains an Intel Pro Wireless 3945ABG network device. It connects fine with my router WiFi running off DSL. I recently bought an iPhone 4 and set it up as a personal hotspot. I've been able to connect a friend's Macbook to it. But even though my HP laptop sees the iPhone network, when I try to connect to it I get "Unable to connect to this network. It may be out of range." I've downloaded the current update for the wireless device.

View 1 Replies View Related

Connect Desktop To Wireless Internet Wifi Hotspot?

Jan 20, 2012

1st. I have a desktop and nearby there is wireless internet WiFi hotspot. How can I connect it to the wireless internet WiFi? I am thinking of buying this: http:[url]....Apart from that adapter do I need something else?

2nd. Where the desktop is, I have no reception. I mean because my cellphone has no reception when it is in the same place where the desktop is. But when I put my cellphone in the window around 12 feet away, there is reception. So I am wondering if I can make a 12 feet long USB cable from the desktop to the window and with the Wifi/WLAN Wireless Network USB Adapter in the window.

View 5 Replies View Related

MiFi Hotspot - Connect Wireless Adapter To Router With USB

Feb 7, 2012

I am trying to use a MIFI hotspot for the internet, I have a wifi laptop, and a wifi printer.I would like to print wirelessly from my laptop and use the internet at the same time, but I can't. To print I have to go to my wireless network and switch to my router. And if I want to use the internet I have switch my wireless network back to the MIFI hotspot.

View 3 Replies View Related

Laptop Won't Connect To Hotspot

Nov 10, 2012

I recently bought a mobile hotspot for my new start-up business (rather than paying for multiple internet locations) but I can't connect with my laptop--I'm really trying to avoid buying a newer laptop because my funds are limited right now.My iphone and PS3 can connect to the hotspot and run fine without any problems. The laptop can connect to my hotspot BUT the internet wont connect, it just says 'unidentifiable network'.

View 7 Replies View Related

Cisco Wireless :: AIR-LAP 1231G-A-K9 To Use Them On Same AP

May 17, 2012

I have a couple of questions: I have a 161 AP,s most of which are AIR-LAP 1231G-A-K9 two 4400 WLC. Some of these APs are using  AIR-ANT 1728 (2.4 GHz omidirectional 5.2 dBi)  and Mobile Mark OD9-240 (2-GHz omnidirectional  9 dBi) on the same access points. Some of my AP are PoE and some are using a power supply (at the AP) some are using both. Power level is set at 2 a radios are not enabled just the bg radios. I'm having issues: I need to tweak the APs (Power settings & Channel settings) so my clients (LXE VX6) can refresh faster.

View 4 Replies View Related

Antamedia Hotspot - Cannot Connect To The Internet

Aug 2, 2012

We are having issue on our internet connection, before our Access Points you can use it without any problem... but now you need to put ip on the device so you can access to the internet, added info we are using Antamedia Hotspot Software installed.

View 6 Replies View Related

How To Connect Hotspot Shield Automatically

Jan 4, 2011

how to connect Hotspot shield automatically on startup of Windows xp By checking the option to show on startup it starts on the tray but doesn't connect Is there a command line or something to do to connect it automatically ?

View 7 Replies View Related

Cisco Wireless :: WPA2-PSK AES On 1231G

Apr 13, 2010

How to get the 1231g to work with WPA2-PSK (AES).  My laptops cannot authenticate using this config but connect fine to the 1242AG.  Below are some of the specifics:
Radio Type: AIR-MP31G
IOS Ver: 12.3(8) JED
Multiple SSID
Encryption: AES
Key Management: Mandatory WPA 
*Laptops can connect to SSID with WEP

View 3 Replies View Related

Cisco Wireless :: Getting Configuration On 1231G AP?

Mar 25, 2012

I configured one vlan and trying to authenticate it through radius server.My objective is when a internal users want to connect through this SSID they just put username and password and authenticate through Radius server. Another vlan is getting authenticated through mac address that i need to manually put in AP.

View 2 Replies View Related

Laptop Will Not Connect To T-mobile Hotspot Via Wifi

Jun 11, 2011

I just purchased a T-Mobile hotspot (ZTE) yesterday. It can connect to the T-Mobile network and appears to be working fine. My Wii can connect wirelessly to the the hotspot, but my laptop can only connect to the internet through the USB cord (which it's really not supposed to, because that's supposed to be for charging the device). When I try to connect via wifi to my hotspot, my computer can detect the network. However, after I immediately enter my password, it says that it cannot connect. When I click "Diagnose the problem" it says there was a timeout.I have Windows Vista and one of the tech support people mentioned that Windows Vista sometimes has problems connecting with handshake devices (but he didn't know how to fix it). Another person said I should have about 20 seconds to type in my password, so it shouldn't be timing out so quickly. Is it something with my computer? I have a Compaq Presario CQ60. I had this same problem when I tried to connect to a friend's hotspot a couple weeks ago (I don't remember if it was also T-Mobile or another provider, though).

View 8 Replies View Related

Laptop Cannot Connect To Public Wifi Hotspot?

Aug 28, 2011

Anyway, I have a Toshiba Satellite L645D-S4056 with Win7 Home Premium 64-bit. I've had it almost a year now and have never had trouble connecting to public wifi.Recently, I moved into a new apartment with free wifi and I seem to catch the signal from my apt even though it is poor. Every time I try to connect with my Toshiba it says, "Windows is unable to connect to 'linksys'." However, my husband's HP laptop and my old eMachines laptop (7yr old) (which I am using to research the problem) can connect with absolutely no issues. When I go to the clubhouse, my Toshiba can connect, however it cannot identify the network and does not receive an actual internet connection.

So far, I have uninstalled/reinstalled and updated my network adapter (Realtek RTL8188CE), I've used Command Prompt ipconfig /reset and ipconfig /release along with several other commands suggested to other wifi connection problemsI've checked my DHCP and DNS to ensure they're enabled.As for firewalls, I have turned off windows firewall and have disabled Kaspersky protection, however I have yet to uninstall and reinstall, this being because I can connect to a password prompted internet connection at work.I am unsure how to check my IP address or any of that

View 2 Replies View Related

Using An IPhone 4 As Hotspot To Wirelessly Connect Pc To The Internet?

Aug 24, 2012

I am using an IPhone 4 as a hotspot to wirelessly connect my pc to the internet using a medialink wireless USB adapter. It says I am connected the IPhone says I am connecte3d but when I click on internet explorer it says web page not available.

View 2 Replies View Related

Netgear WGR514 - Connect A Hotspot To Router?

Nov 26, 2012

I have a 4g hotspot with no places to connect a cable, etc. I wanted to know if and how i can get a Netgear WGR514 router to pick up the 4G signal. I need this router because I have some other equipment that i need to connect that does not accept wireless signals.

View 1 Replies View Related

Security / Firewalls :: Unable To Connect Hotspot Shield

Jan 7, 2013

i am using internet in my office where some websites are blocked like my office proxy server is being used.i download the portable hotspot shield to use FB. but i did not connected. During the time, when hotspot maintaining connection a msg has been written "waiting for the response from secure server."

View 2 Replies View Related

Couldn't Connect To Mobile Hotspot But Other Networks Fine

Mar 11, 2013

Couldn't connect to mobile hotspot but could connect to other networks, none of which were from a phone. When attempting to connect to hotspot, my phone displays the information of my computer as name unknown, IP address, but gives a MAC address. (My computer has a name, I can't find my IP address, idk what a MAC address is)I tried using remote desktop connection, but the computer I was trying to connect to couldn't find mine.

To be honest, I'm not sure I did it correctly, though.Displayed as on phone when attempting to connect to mobile hotspot.I typed ipconfig in command prompt but got nothing about an IP address. There were several lines that began with "Tunnel adapter" all followed by "Media State : Media Disconnected" then "Connection-specific DNS Suffix: I currently have no internet connection (I'm on my phone), so I can't find it that way either.

Under Network Location it specifies that it cannot connect to MEMORYCARD (\EPSON00) (Z:) and upon clicking on it I receive an error message: "Microsoft Windows Network: The network path was not found. This connection has not been restored."I've spilled water on my keyboard before, but this took place after these problems arose. I dried the computer and had it sit with rice for 2 days. The only issue that came of this incident that I am aware of was a few stuck keys.

View 2 Replies View Related

Dell :: WRVS4400N Won't Connect To Verizon IPhone Hotspot

Mar 8, 2013

I cannot get my Dell Laptop Inspirion c to connect to Iphone Hotspot. Is there s setting I need to change? My spouse's Dell laptop connects to Iphone hotspot without any trouble. I've restarted several time, it shows that it's connected, google will come up for a minute and then nothing.

View 1 Replies View Related

Cisco Wireless :: LWAP 1231G Can't Join An WLC 2504

Dec 5, 2012

I have WLC 2504 with software version , & 2 different LWAP 1262n & 1231G with "c1200-rcvk9w8-mx.124-21a.JA" Image.The 1262n is joined to the to the controller and working fine but the 1231G it can't join the controller , the controller says "Join request received from an unsupported AP" !!i will attaches the logs for this AP.

View 3 Replies View Related

Cisco Wireless :: AP 1231G Not Passing DHCP To Clients

May 27, 2012

My company AP 1231G is not passing the DHCP address to the client from the DHCP server, my config listed below basicly the AP is on its own VLAN and the DHCP server is -- trying to use iphelper to pass DHCP to clients and the AP is on static IP
! Last configuration change at 13:15:56 +0800 Fri May 25 2012 by root
! NVRAM config last updated at 13:15:56 +0800 Fri May 25 2012 by root


View 1 Replies View Related

Cisco Wireless :: Remotely Factory Reset AP-1231G Through SSH

Jan 23, 2013

Is there any possible way to factory reset an AIR-AP1231G-A-K9 that was once attached to a WLC via SSH? I dont have physical access to it and the old WLC has long been decommissioned. I have tried the clear command but since it is in CAPWAP mode that command has been disabled. I know I can press and hold the mode button and reset it that way but I need to know if its possible through SSH to be reset. I have two that are in need of being reset in order to connect to the new WLC.

View 21 Replies View Related

Cisco Wireless :: Unable To Perform Image Recovery On 1231G

Mar 18, 2012

I have an Aironet 1231G that I'm trying to recover an image on. I'm following the cisco directions of reloading the AP image file from an active TFTP server (which is myPC). My PC has a static ip address of with the TFTP server running. I've verfied that the TFTP server works by upgrading a switch IOS.The issue I'm encountering is the 1231G does not see the TFTP server correctly. url...

View 2 Replies View Related

Cisco Wireless :: Clients Authenticating To 1231G Not Getting Assigned DHCP Addresses

Jun 24, 2007

Here at HQ we have a 4402 WLC. At our remote sites we have 1231G APs running in autonomous mode. I upgraded one of the APs -- IOS 12.4(3g)JA -- to run LWAPP. Per release notes I've read upgraded 1231's do not support REAP/HREAP mode, consequently, it's running in LOCAL mode.
The AP is managed by the WLC. I created a WLAN for the remote site and assigned it to the MGMT interface; the remote site subnet doesn't exist in HQ. The DHCP server for the remote site is presently at that site; AP and DHCP server reside at the same place.
Clients authenticate successfully to the remote site AP, however, they are not getting DHCP addresses assigned.  Does the DHCP server for the remote site have to reside in HQ since the AP is running in local mode? If so, where is that specified, on the MGMT interface config?

View 4 Replies View Related

Cisco Wireless :: Cannot Connect To Second SSID On Aironet 1231

Apr 22, 2013

I have configure my AP with to SSID (11 & 12), but I cannot connect to 12. It authenticates, and while trying to acquire IP address from 12, it fails and connects me to 11 (if I have already saved the SSID connection).
The following is my AP status:Product/Model Number:AIR-AP1231G-A-K9 System Software Filename:c1200-k9w7-tar.123-8.JEE System Software Version:12.3(8)JEE Bootloader Version:12.3(2)JA4  
The SSID 12 already have 4 clients connected, And I am tring to connect a 5th one (smart phone), but cannot connect to 12, instead coneected to 11. Also tried with a laptop, but cant get the IP address, and give Limited Connectivity error.

View 3 Replies View Related

Centrino Advanced-N 6205 / Use Intel Wi-Fi Hotspot Feature To Connect Xbox 360 Slim?

Feb 14, 2013

I've got a Centrino Advanced-N 6205 for Desktop wireless card and I'm trying to use the Intel My WiFi hotspot feature to connect my Xbox 360 Slim. The SSID shows up in the Xbox's networking settings, but after I enter the WPA passkey it fails to connect.

View 2 Replies View Related

Cisco Wireless :: Can Connect Various Aironet 1242 To 2500 Controller

Dec 5, 2012

Can I connect various Aironet 1242 to Wireless controller 2500?

View 4 Replies View Related

Copyrights 2005-15, All rights reserved