My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged itMy laptop can not wireless connect.
View 1 RepliesMy D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies View RelatedI'm using an HP pavilion desktop, and an apple airport. Whenever I connect my desktop to the router, it stops sending its signal out. It simply stops appearing on the list of networks. It comes back if I restart it, but then will disappear again after 10 or so minutes. I'm using windows 7, and a Belkin USB adapter. The problem appeared after doing a factory reset. While it is not broadcasting, there is a green light still on on the front of the airport, and I can see other wireless networks.
View 1 Replies View RelatedMy router got turned off for aroud 2 hours, now my speeds have dropped by around 40-50% according to speed test.
View 1 Replies View RelatedWondering if there was a way to disable all internet in a household without actually turning off the modem/router. What im trying to do is disable all internet to my desktop computer, THROUGH my laptop. This accounts for lan and wifi.
View 1 Replies View RelatedI've been looking around like a madman now in the settings. where can I turn off my WPS ? Just cracked my own PIN within 6 hours with Reaver.
View 9 Replies View RelatedI want to turn my old Surf router into an access point but am having a few issues. I know how to do it and can get the LAN ports working fine but the wireless is confusing me.I was wondering how I set up wireless devices to connect to it. I know there is no DHCP and the access point IP is 192.168.2.200
View 12 Replies View RelatedI have a question regarding setting up a wireless access point on a network. Lets say my router is going to connect to a switch. The switch puts out 192.168.4. addresses. I want the wireless router to do the same. So I turn off DHCP.Everything works fine and everyone can communicate. Here is my question. How do I ever connect back to the wireless router if I need to change the settings? If the wireless routers address is 192.168.1.1 I cannot get back to it since i am now on the 4. subnet. I have also tried changing the router's ip to an address on the subnet such as 192.168.4.100 but on two different routers this didnt work. One didnt me and said there was a conflict with the WAN IP. The other one would not let me get on the internet.
View 1 Replies View RelatedI have broadband internet coming into 1 room of my home. The internet goes through a router I have set up, its a Linksys WRT54G2 (router #1), Firmware version 1.0.04. Everything on this works fine, I'm able to get my TV and laptop in a different room to access the router wirelessly without any inconvenience.In another room I have a regular desktop computer which I would like to get internet on. As well as other devices, so I purchased another router, this time a Linksys E4200 (router #2) in hopes of turning it into an access point.Now I've set up LAN's in the past, using the actual cable plugged into the second router, problem is in this scenario I can't run a cable over to router #2. Both computers use Windows 7. Both router's drivers and firmware have been updated on the Linksys page, all my Windows drivers are updated, etc. I checked other forums for similar questions and although there are some, they date back to 2009 as well as Google which has some websites dating back to 2006! While useful, I wasn't able to find something that details how to solve my problem with my specific setup. I've already gone into router #2 and changed the router's IP to 192.168.1.2 and also turned DHCP off, problem is, once I take that router off into the other room, it doesnt connect to primary network or allow devices to even "see" router #2.
View 2 Replies View RelatedI have WRT 120 N which has apparently stopped working. When I turn it on, only the power led turns on without blinking, no other light flashes. My computer can't detect the router signals since the signal light is off. Neither does my modem show that the router is connected to it through the ethernet cable. My ethernet cable is working fine, since it is working directly with the computer.
View 6 Replies View RelatedI want to save energy. How can I turn off the Linksys N300 range extender at night. Can just unplug or will this screw things up.Is there a button
View 1 Replies View Relatedwe got a At&T Modem/Router upstairs, and then we got a long ethernet cable running from there to the basement. The problem is that this only allows for one LAN connection at a time (an issue for LAN parties and such). I do have an E2000 Linksys router however and I want to be able to use that as like a switch/access point.I am pretty sure this is possible but I have forgotten all of the steps to do it.The att modem/router is running on 192.168.1.254, and my Linksys which is now directly connected is on 192.168.1.1, so I have a different address in that regards.Do I need to edit my Linksys settings now, or do I have to edit the at&t settings?Also I will be using this for Xbox Live at points so will I need to re-open all those ports up on my Linksys, or at least set the DHCP to the Xbox's static IP to keep my NAT good?
View 2 Replies View RelatedI have an old computer that is currently running XP at 2.1GHz Athlon AMD with 1.5 DDR RAM, would I be able to turn it into a dedicated server? More importantly, should I? all I have is a small home network running a couple desktops and a printer off one and connected by a wireless router to the internet, would it make a difference at all in processing speed or connectivity on any of them?
View 2 Replies View RelatedMy wireless adapter keeps turning off randomly on my HP G60 120EM.
It will have my connection strength icon on the icon tray and then just randomly display an adapter with a red cross through it.I have made sure that the adapter is not set to turn off on power save but still the problem persists.I thought it could be the adapter being loose inside the laptop but if i give the laptop a small shake it doesn't disconnect and I opened up the laptop and everything seems fine.This is where it gets a bit strange. If I close the laptop lid then open it again, the wireless is fine, but will drop off again about a minute later.
I need to find a way to PERMANENTLY disable the network adapter from turning off to save power. Its this setting here. Uploaded with ImageShack.us Every time I restart the computer it rechecks that box. I manage an office with about 10 computers and this power saving feature is making the software they use very unstable.
View 2 Replies View RelatedMy modem and rotuer have double NAT. I am not the only one in my house so I can't mess with the router a lot, but turning the NAT off in my modem and assigning the new IP to my static IP router, by turning off DHCP in the router. Will make my modem a access point.
View 5 Replies View RelatedHave already checked in the Device Manager if the �Allow this device to wake the computer� is unchecked.What do I do to bring the sleep mode back without turning off the file sharing (if file sharing caused the problem)?
View 1 Replies View RelatedIm having a problem with my laptops wireless capability; it worked fine, until i tried a hardwried connection (i went over to this center and tried one and it didn't work, so i unplugged it).
Now, I can't connect to any wireless networks unless i do the windows network troubleshooter, which it tells me my laptops wireless capability is turned off; I then have to click on the option to turn wireless capability back on..
I have tried playing in change adapter settings in Network Connections, but nothing is working.. I have tried disabling the LAC and wireless adapter but nothing is working..
I also notice under Local Area Connection that is says "Network cable unplugged". Also in one of the tables of the windows network troubleshooter it shows Network cable unplugged and wireless capability is turned off.. Is my laptop trying to find the hardwire connection all the time so it turns off wireless?
My daughter is going to Uni and has wired ethernet access in her room but no wireless. She would like wireless so a) doesn't have to bother with cables and b) can use the WiFi for her phone.Would it be simple enough to plug a wireless router into this ethernet connection and set up her own SSID/Passwords?
View 2 Replies View RelatedThe wifi/bluetooth on my Dell XPS M1530 with an Intel 4965AGN wifi adapter erratically blinks off and on, flashing the status on the screen. This began happening about a year ago, but eventually stopped doing it. Now it's begun again. Flashing on and off is intermittent, but it's been happening more and more frequently--5-10 times/hr now. Sometimes it just flashes on and off once, sometimes, more rarely, 10-15 times.
This happens in Vista, Vista safe mode, as well as Ubuntu run from a USB key. That leads me to believe that it's a problem with the hardware. If I turn the wifi switch on the side of the computer off, it does shut the wifi off; turning the switch back on turns wifi on, but sometimes as soon as it's on, the wifi/bluetooth will start blinking on and off on screen. I have tried taking the adapter out and putting it back in a couple times. This didn't seem to change anything.
My girlfriend's computer has quite suddenly developed the problem that the wireless card simply will not turn on.She has an Asus Notebook G60 Vx Series, which has a switch on the front as well as Fn+F2 for turning wireless on/off. Yesterday, she noticed it wasn't working even though the switch was "on", but was able to use Fn+F2 to enable it. Today, neither will work. It simply won't turn on.Ethernet works fine when connected directly to the router. Device manager detects "Intel(R) WiFi Link 5100 AGN" as working correctly and drivers as up-to-date.I feel like this must be a software/driver problem, but everything seems to be checking out. [code]
View 8 Replies View RelatedI purchased this router, and in reading reviews several people complained how bright the blue "dome light" is. They also pointed out that in the manual there is a way to turn it off. I would like to turn it off, and I have read the manual virtually "cover to cover" (I am after all reading it on my computer), but I did not find any information about this.
View 4 Replies View Relatedlose network connection on htc one v. At settings, mobile network says radio turned off. Could I have done something to cause this. I`ve had this phone for 4 months. This problem just started.
View 2 Replies View RelatedI've just bought an N150 router. I also have a wireless IP camera. I want to keep the same 192.168.2.3 address for my camera regardless of how many other devices are connected when I switch it on. If the address changes I need to connect a cable to access it.On my previous prehistoric Netgear I could reserve addresses that I didn't want to change. I tried turning off DHCP but then couldn't access the router from the wired PC and had to reset it all. Then I had to run cables down the garden to reconnect the camera.Can I turn DHCP off for some addresses that I want to keep?
View 3 Replies View RelatedI am trying to turn on the bluetooth in my Inspiron 15R laptop but the button provided with F2 key is not responding
View 1 Replies View RelatedIs there any traffic interruption if turning on TE in a working MPLS core?
View 8 Replies View Relatedaccess network but cannot get online without turning on laptop
View 1 Replies View Relatedmy laptop always automatically disconnects from my wireless when I switch to battery and unplug from the power cable. I then have to restart because my laptop doesn't find any wireless adapter installed.
View 2 Replies View RelatedIs it possible to turn off the 5Ghz signal on a Dual Band Router N750 DB (F9K1103v1)?
View 1 Replies View Relatedwe took one of our controllers and turned LAG on and since then it is unreachable on the WCS. The controller is running version 7.0.116.0 and the WCS is running 7.0.172.0. I can access teh WLC no problem through web interface and CLI, as I can also do this with the WCS as well, but the WCS cannot access the WLC.From CLI i can ping the WCS from the Controller and get a response, but from CLI on the WCS, I cannot ping the controller.
View 5 Replies View Relatedwe have a new ACS 5.2 server, and are having a problem with the case sensitivity of ACS. Basically, what is happening is that some users are capitalizing the first letter of their AD username, and it's causing ACS to deny their access due to the case of their username. For example:
Username yyy0h22 grants admin access to a device. However, Username Yyy0h22 denies access to a device.
Is there a way to make it so that no matter uppercase or lowercase, we are giving this person access? Without having to make a different rule for each permutation?
I have recently added a wifi router to my home network. The connection is from my cable modem to a wired router to the wifi router. Everything on the network works great except when I turn on my cell phone's wifi connection. That disconnects my entire network from the internet and I have to unplug/replug my wired router to get reconnected. If I leave home with my phone and return, leaving the cell's wifi setting on, it reconnects to the network without disrupting the internet connection.
View 4 Replies View RelatedI have the WMP54G internal wireless adaptor. It normally works fine, but I have been having problems with it lately when I turn my computer back on from sleep. Even thought the wireless router works just fine, when the computer wakes up from sleep the adaptor does not seem to detect any network. I have to restart my computer, and then the adaptor detects the network.
View 1 Replies View Related