Cisco :: Any Traffic Interruption Turning On TE In MPLS Core
Jul 4, 2012Is there any traffic interruption if turning on TE in a working MPLS core?
View 8 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5510 Connected To MPLS And LAN Via 6506-E Core Switch
Apr 19, 2011I am attempting to install an asa 5510 at my hq. Our MPLS network is provided by our ISP and the routers are managed by them. They will be working with me to add the needed routes to the routers. Using version 8.4.1 That said, here is my challenge:
I am connecting the MPLS routers and WAAS device to my core switch(also performing inter-vlan routing) in VLAN 2. There are 3 connections needed for the mpls equipment and they are all in vlan 2 on my core switch. The firewall (ASA 5510 with security plus licensing) also has an interface (outside) in vlan 2.
e0/0
shutdown
no nameif
[Code]....
configuration guides or suggest TAC as they have been a bit inconsistent with this issue thus far. What am I missing because I cannot get to where inside interface of the firewall is pingable by the lan and the outside interface of the firewall is pingable by the lan.
Cisco WAN :: Dual MPLS Routers Connected To Dual N5K Core
Mar 29, 2012I wanted to ask a question about the diagram I have included. We are bringing up 2 MPLS WAN connections and would like some specifics on the best design. We are using BGP to the providers. From there we have big questions. We can run BGP internal and are licensed to do so on the N5K's. The N5Ks are currently using HSRP for inside LAN clients as default gateway. We want to load balance and provide redundant routes using a dynamic approach. Should we use BGP internal utilizing the connections between the routers? Should we use HSRP on the routers? How best to get the routes to the N5K and should we be considering this?
View 5 Replies View RelatedCisco WAN :: 7206 VXR Configuration To Pass MPLS Traffic?
May 28, 2013I have a 7206 VXR router between a several Mikrotik routers on our backbone. We have the Mikrotiks on both sides of the CIsco 7206VXR setup for MPLS/VPLS. I need to simply setup the 7206 to pass the MPLS/VPLS tagged packets to the next router on the link. We are using OSPF as the routing protocol. I am told by our Mikrotik guy that I just need to enable LDP and VPLS tunnels 4:0 on the 2 gig interfaces on the 7206VXR to let it pass the MPLS/VPLS traffic. It sounds simple but I'm not sure how to do this.
Any commands I need to imput to allow this router to pass this MPLS/VPLS traffic.
Cisco WAN :: 1941 / K9 / How To Route Internet Traffic Through MPLS
Nov 22, 2011I am working for a company based in Sydney Australia, the company recently open an office in London UK, therefore we are going to get leased lined based on MPLS.We were advised that Customer Edge router will be CISCO1941/K9. We want to our UK client to access our web-based applications via MPLS network instead of internet. The UK office is using BT Business ADSL with 5 Static IP address (please note the modem IP address is actually dynamic), we are going to get a Cisco 857/K9 router which will be used for the entry for the UK client to access the MPLS network. My question will be how do I configure the Cisco 857 router to allow one of the public ip to access the MPLS network. It appears that there are two options, and I am not sure if this is going to work or which one is working better. I have attached two diagrams for clarification of my case.
Option 1 Cisco WAN interface get Dynamic IP (PPPoA) from BT LAN Interface (4 Port) get the assigned 5 Static IP addresses One of the five IPs (217.xx.xx.169) will be assigned to the FE1 (Cisco 1941), any traffic to 217.xx.xx.169 will be routed to the WAN interface of Cisco 1941 to access Sydney service (located in Sydney LAN, mostly http and https traffic) One of the five IPs to 217.xx.xx.170 will be assigned to the WAN interface of Sonicwall Firewall Router which also serve as Internet Access Gateway for LAN users, All trafiic destined for Sydney LAN will be using FE0 (Cisco 1941) as gateway
Option 2Cisco WAN interface get Dynamic IP (PPPoA) from BT LAN Interface (4 Port) will get 192.168.0.1, Cisco 857 router will be the default gateway for LAN users, using one to many NAT, also one to one NAT, One of the five IPs (217.xx.xx.169) will be forwarded to the FE0 (Cisco 1941), any traffic to 217.xx.xx.169 will be routed to the WAN interface of Cisco 1941 to access Sydney service (located in Sydney LAN, mostly http and https traffic)
Protocols / Routing :: MPLS QoS To Reserve Traffic
Sep 21, 2012Before going further let me tell you I hate QoS..the policies that I applied. I am trying to create reserve traffic for a CE but when I try to download or upload the traffic goes from 2MB which is where it should stay to up to 6MB?completly losted, I will not move to ccnp sp like this.
View 2 Replies View RelatedCisco WAN :: 2800 ISR And MPLS - How To Load Balance / Prioritize Traffic Between Them
Oct 31, 2011We have 2mb mpls network between three sites. Each site also has its own internet connection for hosting webserver and internal users to access internet. Each site has a few internal subnets. Each site currently has a 2800 series ISR.
1) Increase Internet connection to 10mbps and configure site-to-site VPNS in a mesh configuration so that each site has a vpn to each other site. This would create six vpn tunnels.
2) Configure so that only Exchange and VoiP traffic use the MPLS network under normal conditions. All other traffic (backup/misc apps) should be routed to use the Internet VPNs. If the MPLS fails of course we would like the Exchange and VoiP traffic to fail over to the VPN connections as well until the MPLS comes back up.
L3 Core Switch VLAN Traffic Monitoring With IPS
Jun 9, 2012I have a L3 core switch with multiple VLANs setup. Is there a way to place an IPS so as to monitor the traffic passing between, lets say, VLANS 1-3 and VLANs 4-10?
View 19 Replies View RelatedCisco :: 7206 MPLS To Export Netflow From Its MPLS
Jul 11, 2012I have P router (7206VXR) and I need to export netflow from its MPLS interfaces to the netflow software.
View 2 Replies View RelatedNetwork Disconnection And Download Interruption
Jan 2, 2013My network connection keeps on disconnecting every few minutes and my downloads are always interrupted. I also checked out my Ipconfig and the Media State says Media Disconnected. I�m using windows XP by the way.
View 2 Replies View RelatedCisco WAN :: 7301 - Route Reflector Maintenance Without Service Interruption
May 27, 2013I have question regarding route reflector. In my MPLS core network ,we have two route reflectors. Two route reflectors and each PE routers are belonged to a peer group. Route reflectors are Cisco 7301. IOS 12.3. I have Hardware maintenace on one Routereflector. How can I do that without interupting the end customer trafic.
View 2 Replies View RelatedLinksys Wireless Router :: E4200v2 - Power Interruption
Aug 4, 2012I have a new E4200v2 that I got from Amazon a few months ago and I haven't had any problems with it while it's up and running. My problem comes when the power to it is some how interrupted. When this happens, I can not connect to the internet. I can get to the router pages and the modem pages. I even changed out the the modem recently and the router still has the same problem.
I tried saving a working configuration file and restoring it after a fail, but that doesn't work. When I do a factory restore, I still can't connect until I use the stupid Cisco disk. In order to get back online I have to do a factory restore, use the Cisco setup disk, then reset my settings. All without removing power. My old router a WRT54GS v5 never had this problem. I need a router that works without having to set it up every time the power goes out.
Cisco Switching/Routing :: Nexus 5596 - Remove Switch-Profile Without Interruption
Jun 11, 2013i want to remove the sync-profile on each of two synchronized Nexus 5596UP without loosing the config stored in Switch-Profile. That means without connectivity interruption and re-configuration of interfaces in "conf t mode", for example. Since NX-OS Release 5.2(1)N1(1) there is a new command
switch(config-sync)# no switch-profile abc profile-onlyprofile-only—Deletes the switch profile without the local configuration.
[URL]
Turning An Old Computer To A Server?
Jun 15, 2011I have an old computer that is currently running XP at 2.1GHz Athlon AMD with 1.5 DDR RAM, would I be able to turn it into a dedicated server? More importantly, should I? all I have is a small home network running a couple desktops and a printer off one and connected by a wireless router to the internet, would it make a difference at all in processing speed or connectivity on any of them?
View 2 Replies View RelatedD-Link Router Not Turning On?
Nov 18, 2012My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged itMy laptop can not wireless connect.
View 1 Replies View RelatedWireless Adapter Keeps Turning Off Randomly
Jan 23, 2013My wireless adapter keeps turning off randomly on my HP G60 120EM.
It will have my connection strength icon on the icon tray and then just randomly display an adapter with a red cross through it.I have made sure that the adapter is not set to turn off on power save but still the problem persists.I thought it could be the adapter being loose inside the laptop but if i give the laptop a small shake it doesn't disconnect and I opened up the laptop and everything seems fine.This is where it gets a bit strange. If I close the laptop lid then open it again, the wireless is fine, but will drop off again about a minute later.
Network Adapter Keeps Turning Off When Pc Is Idle?
Mar 15, 2011I need to find a way to PERMANENTLY disable the network adapter from turning off to save power. Its this setting here. Uploaded with ImageShack.us Every time I restart the computer it rechecks that box. I manage an office with about 10 computers and this power saving feature is making the software they use very unstable.
View 2 Replies View RelatedHP Pavilion Desktop Is Turning Off My Router
Nov 9, 2012I'm using an HP pavilion desktop, and an apple airport. Whenever I connect my desktop to the router, it stops sending its signal out. It simply stops appearing on the list of networks. It comes back if I restart it, but then will disappear again after 10 or so minutes. I'm using windows 7, and a Belkin USB adapter. The problem appeared after doing a factory reset. While it is not broadcasting, there is a green light still on on the front of the airport, and I can see other wireless networks.
View 1 Replies View RelatedTurning Modem Into Access Point
Jan 1, 2013My modem and rotuer have double NAT. I am not the only one in my house so I can't mess with the router a lot, but turning the NAT off in my modem and assigning the new IP to my static IP router, by turning off DHCP in the router. Will make my modem a access point.
View 5 Replies View RelatedTo Bring Sleep Mode Without Turning Off
May 7, 2012Have already checked in the Device Manager if the �Allow this device to wake the computer� is unchecked.What do I do to bring the sleep mode back without turning off the file sharing (if file sharing caused the problem)?
View 1 Replies View RelatedLaptops Wireless Capability Keeps Turning Off?
Jan 8, 2012Im having a problem with my laptops wireless capability; it worked fine, until i tried a hardwried connection (i went over to this center and tried one and it didn't work, so i unplugged it).
Now, I can't connect to any wireless networks unless i do the windows network troubleshooter, which it tells me my laptops wireless capability is turned off; I then have to click on the option to turn wireless capability back on..
I have tried playing in change adapter settings in Network Connections, but nothing is working.. I have tried disabling the LAC and wireless adapter but nothing is working..
I also notice under Local Area Connection that is says "Network cable unplugged". Also in one of the tables of the windows network troubleshooter it shows Network cable unplugged and wireless capability is turned off.. Is my laptop trying to find the hardwire connection all the time so it turns off wireless?
Turning Wired Connection Into Wireless?
Sep 14, 2012My daughter is going to Uni and has wired ethernet access in her room but no wireless. She would like wireless so a) doesn't have to bother with cables and b) can use the WiFi for her phone.Would it be simple enough to plug a wireless router into this ethernet connection and set up her own SSID/Passwords?
View 2 Replies View RelatedDell :: M1530 - Wi-Fi Erratically Turning On And Off
Jul 29, 2012The wifi/bluetooth on my Dell XPS M1530 with an Intel 4965AGN wifi adapter erratically blinks off and on, flashing the status on the screen. This began happening about a year ago, but eventually stopped doing it. Now it's begun again. Flashing on and off is intermittent, but it's been happening more and more frequently--5-10 times/hr now. Sometimes it just flashes on and off once, sometimes, more rarely, 10-15 times.
This happens in Vista, Vista safe mode, as well as Ubuntu run from a USB key. That leads me to believe that it's a problem with the hardware. If I turn the wifi switch on the side of the computer off, it does shut the wifi off; turning the switch back on turns wifi on, but sometimes as soon as it's on, the wifi/bluetooth will start blinking on and off on screen. I have tried taking the adapter out and putting it back in a couple times. This didn't seem to change anything.
Cisco Wireless :: Cannot Add WLC 4404 To WCS After Turning On LAG - Device Not Found
Sep 19, 2011we took one of our controllers and turned LAG on and since then it is unreachable on the WCS. The controller is running version 7.0.116.0 and the WCS is running 7.0.172.0. I can access teh WLC no problem through web interface and CLI, as I can also do this with the WCS as well, but the WCS cannot access the WLC.From CLI i can ping the WCS from the Controller and get a response, but from CLI on the WCS, I cannot ping the controller.
View 5 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 - Turning Off Username Case Sensitivity?
Mar 27, 2011we have a new ACS 5.2 server, and are having a problem with the case sensitivity of ACS. Basically, what is happening is that some users are capitalizing the first letter of their AD username, and it's causing ACS to deny their access due to the case of their username. For example:
Username yyy0h22 grants admin access to a device. However, Username Yyy0h22 denies access to a device.
Is there a way to make it so that no matter uppercase or lowercase, we are giving this person access? Without having to make a different rule for each permutation?
Cabling / Cards :: Wireless Card Not Turning On At All
Nov 1, 2011My girlfriend's computer has quite suddenly developed the problem that the wireless card simply will not turn on.She has an Asus Notebook G60 Vx Series, which has a switch on the front as well as Fn+F2 for turning wireless on/off. Yesterday, she noticed it wasn't working even though the switch was "on", but was able to use Fn+F2 to enable it. Today, neither will work. It simply won't turn on.Ethernet works fine when connected directly to the router. Device manager detects "Intel(R) WiFi Link 5100 AGN" as working correctly and drivers as up-to-date.I feel like this must be a software/driver problem, but everything seems to be checking out. [code]
View 8 Replies View RelatedNetgear WNDR3400 - Turning Blue Light Off?
May 16, 2011I purchased this router, and in reading reviews several people complained how bright the blue "dome light" is. They also pointed out that in the manual there is a way to turn it off. I would like to turn it off, and I have read the manual virtually "cover to cover" (I am after all reading it on my computer), but I did not find any information about this.
View 4 Replies View RelatedLower Wireless Speeds After Turning Off Router?
Dec 11, 2012My router got turned off for aroud 2 hours, now my speeds have dropped by around 40-50% according to speed test.
View 1 Replies View RelatedDisable All Internet Without Actually Turning Off Modem / Router?
Jul 21, 2012Wondering if there was a way to disable all internet in a household without actually turning off the modem/router. What im trying to do is disable all internet to my desktop computer, THROUGH my laptop. This accounts for lan and wifi.
View 1 Replies View RelatedWireless :: Htc One V Radio Keeps Turning Off - Losing Network
Mar 28, 2013lose network connection on htc one v. At settings, mobile network says radio turned off. Could I have done something to cause this. I`ve had this phone for 4 months. This problem just started.
View 2 Replies View RelatedBelkin Routers :: N150 Turning DHCP Off
Nov 8, 2012I've just bought an N150 router. I also have a wireless IP camera. I want to keep the same 192.168.2.3 address for my camera regardless of how many other devices are connected when I switch it on. If the address changes I need to connect a cable to access it.On my previous prehistoric Netgear I could reserve addresses that I didn't want to change. I tried turning off DHCP but then couldn't access the router from the wired PC and had to reset it all. Then I had to run cables down the garden to reconnect the camera.Can I turn DHCP off for some addresses that I want to keep?
View 3 Replies View RelatedLinksys Wireless Router :: E2000 - Turning Off WPS?
May 28, 2012I've been looking around like a madman now in the settings. where can I turn off my WPS ? Just cracked my own PIN within 6 hours with Reaver.
View 9 Replies View RelatedDell :: Inspiron 15R - Bluetooth Adapter Is Not Turning On
Feb 12, 2012I am trying to turn on the bluetooth in my Inspiron 15R laptop but the button provided with F2 key is not responding
View 1 Replies View Related