What are the correct driver to use for the Optilplex GX200 On-board Ethernet port.
My configuration gives me an error message saying I need drivers for my PCI Ethernet Controller, however, it has not identified the manufacturer or the driver.
just formated my computer and can not find ethernet drivers
View 1 Replies View Relatedhow to down load dell optiplex 380 lan driver
View 3 Replies View Relatedi want to download drivers for dell optiplex 380n ( win xp )
View 1 Replies View RelatedMy daughter bought a Dell Optiplex 745c from a company who is replacing their cmputers. This particdular computer does not have any drivers loaded for the installed NIC card, so te machine will not talk to the intenet. Are the drivers in the 745 and the 755 the same?
View 1 Replies View RelatedI did a clean install of Windows 7 32-bit on a Dell Optiplex 980. I don't know what driver is for the ethernet controller. Will you tell me? I just downloaded the INTEL_825XX-GIGABIT-PLATFORM_A06_R290983.exe (5MB). I don't know if this is it. I will try on Monday. Should I update the chipset driver too? What is the driver for that. I downloaded Intel_AMT-HECI_A05_R304259.exe (10MB). Is that right for the chipset?
View 2 Replies View RelatedEthernet controller for dell optiplex gx520?
View 1 Replies View Relatedi want the dell optiplex 380 Ethernet driver software.
View 4 Replies View RelatedIm unable to get my router working as my machine has no ethernet controllers installer.I have a dell, optiplex gx260. The lan in enabled in the Bios. I have searched and tried a number of driver None of which have worked, I have tried the 3com 3c905c txm, intel gigabit LOM, and im about to try the Intel 8254x1000 intregrated netwk driver (which i dont think'll work as its the same as the Lom one). if that doesnt work is it best to reinstall the chipset drivers?
View 6 Replies View RelatedEthernet controller driver for xp dell optiplex 745 desktop?
View 2 Replies View RelatedI need network driver for dill optiplex 380 & servic tag no - 36R08R1
View 1 Replies View RelatedEthernet controller driver dell optiplex 380 windows 7
View 1 Replies View RelatedI installed a fresh Windows XP Pro on my Optiplex gx270 last week. Everything was fine but now I cannot get an internet connection. I followed all the steps on the dell support web site for the windows reinstall, putting all the drivers on in the correct order, all from my original resource CD. Then downloaded the new recommended driver for my service tag from the dell site, and still no ethernet controller driver is found (a yellow question mark with an exclamation mark on top in windows device manager). Tried a couple of times with the dell online chat, but was disconnected right away. Then spent another 1+ hour on the phone with dell tech support this morning. After uninstalling and reinstalling the same drivers I had previously installed, they apparently had no other suggestions and disconnected me. So I'm left with what was a pretty decent machine that is incapable of connecting to the internet.
View 9 Replies View Relatedmy Ethernet driver is not installed on my computer and i am trying to find driver for it so i can use the internet
i have loked at driver on dell website but am unsure what to download i am running XP
proffesional operrating system... i am using another computer to post this question..many of my other device drivers are not installed like display etc
I recently purchase a refurbished Optiplex GX620 with WXP Professional OS. The ethernet controller, along with number of devices, needs a driver. I have downloaded what I think are the approprite files but get the message that the unzipped file is part of a series of disks and I need to insert the last of this series of disks. I ain't got no stinking disks!
View 4 Replies View RelatedI have recently acquired a Dell Dimension 8100, and installed Windows 7 on it.
The Ethernet Controller in Device Manager is flaged (/!) not allowing me to use the internet.
I need a driver for it thats compatible with the onborad controller and Windows 7
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies View RelatedI just bought this computer and was wondering if i could get wifi on it or if i needed to buy a wirless adapter?
View 3 Replies View RelatedWhat wireless card should i buy for Dell Optiplex 745?
View 2 Replies View RelatedI have a Dell Optiplex 780 running Windows XP and a wireless router model 7500 from Verizon. I recently bought this desktop and want to use my old one so the kids can play games on it. However I can't connect to the internet with the old system. I tried running a USB cable from the wireless modem to the old system to no avail. I tried hooking up a wireless-G Broadband router by Linksys to the wireless router and that didn't work. Does there have to be some wifi hardware/software on these desktops? [code]
View 2 Replies View RelatedHow do I get my Dell Optiplex 380 to connect to my wireless network. I get the message that no network is found and to connect my ethernet cable.
View 1 Replies View RelatedI was told that my network adapter was inproperlly installed.Windows could not detect any wired,or wirerless network card installed on computer
View 2 Replies View RelatedRecently I got a brand new E1200 to replace Apple Extreme Base station for my home wireless network. The router deployed just fine except one weird problem. While all devices (desktops, laptops, cell phones, iPad) can access the router, one desktop (Dell Optiplex DX280) cannot see the router at all. The router network, even with default SSID, does not even show in the wireless network list, no matter how many times the list is refreshed. The wireless adapter (Dell TrueMobile 1300 USB2.0) is fine, since it picks up the router SSID when connected to another desktop. The stubborn desktop works just fine with previous Apple router and can see many networks around, like neighbors' networks. Thinking that some other previously installed software interferes with seeing the router SSID, I completely wiped and reformatted HD and reinstalled fresh copy of WinXP - still the same result, the desktop works just fine with the Apple router, but still cannot see E1200 SSID. The router was reset to factory defaults and all access restrictions were removed. While all the devices see the default SSID and can conncet to the router with no problems, the stubborn desktop keep completely ignoring it.
Again, every single component - desktop (Optiplex DX280), wireless USB adapter (TrueMobile 1800 USB2.0), routers (both Apple and Cisco) are functioning normally otherwise. It is the combination of Optiplex GX280 - TrueMobile 1300 - Cisco E1200 that does not work.
I'm on a large network in my office and we recieved new computers(dell optiplex 390) I'm trying to access a mysqlexpress database on my machine from another one and I'm not able to even access the computer using \MYCOMPUTER method with the same user/pass as my machine on the one I'm trying to connect from. But still no one in my office can reach my computer.
My av is OfficeScan.
I've tried:
+ Disabling the firewall(windows no other firewall in place).
+ Checking network settings
+ enabling sharing settings
+ allowing anonymous connections via the regestry value
+ yelling at the machine.
+ adding users to the Aministrators group.
Where I can find the MAC address on a Optiplex desktop GX620? Its not in the BIOS.
View 1 Replies View RelatedI bought my laptop over a year ago. The wireless is really slow. I read other posts about this issue and found out that the network adapter(n1030) on this laptop is faulty or something. So I tried connecting to the internet using the Ethernet port.
The port shows up on my device manager.Realtek PCIe FE Family Controller.I know there is nothing wrong with the modem or the Ethernet cable because internet on the other computers in my house work fine.
I would also like to add that when I bought the computer, it came with windows 7 but had the ubuntu sticker on it. People in Fiji only mostly use windows so I guess the shop I bought this from did the change to windows themselves.
I'm searching for a driver for the PCI Simple Communications Controller for an Dell Optiplex GX110 that is running Windows XP Home edition.
I have installed a Dynex data/fax/voice modem that supports Windows XP, but the system does not recognize it because of the drivers needed for the PCI controller.
I am taking a camera class, everyone sits a desk with a fairly new Optiplex 780, with Windows 7 pro on them and 20 inch Dell Professional monitors.I want to be able to setup something easily so the teacher can share his screen on all of the computers in the class, the projector is terrible.Net Meeting does not exist. Vista had Windows MeetingSpace which would have been absolutely perfect. Windows 7 has SharedView, which is discontinued, is a separate download, and has to be used over the internet with a windows live login.Is there some VNC, free app out there that the teacher can put on his laptop, and have everyone connect to? Over the lan? There are many web-based options, but that probably be slow.
I can use the Bomgar and work and host a presentation, which is what I will probably do, but I have a feeling it is going to suck up a ton of bandwidth and run like crap. We want to display examples of photography in full color.He of course doesn't even know of these plans. But I want to utilize these computers we are sitting at.Could I bring in a Vista laptop, start a MeetingSpace, and have the Windows 7 computers connect to it?
Very soon for the second time we will be replacing systems in our (grad school) student computer Lab from the time of its opening in January, 1998. The monitors are recessed down below glass desk surfaces and are 17-inch CRT (Dell).Our current (medium) computers are SFF GX-150 and have 512MB RAM (doubled from the original 256) and 80 GB hard drives. The new GX620 will have 2GB RAM, 160MB hard drive.In addition, our current 10/100 Ethernet LAN for this part of the campus is also supposed to be upgraded to Gigabit (switch). Any experience of using Gigabit in an organization's local area network to find out any concerns for which I should be alert as we begin this new phase. Incoming students arrive before middle of August so the switch-out needs to be done fairly quickly and smoothly. What concerns should I have?
View 3 Replies View RelatedI see a lot of postings about getting the GX270 working with a ghost boot floppy.
Dell Optiplex GX270 Onboard Intel LOM (Intel 1000 Pro) and Ghost 8.0 Corporate Edition using a Ghost Console Boot Partition.I'm using identical Intel Drivers on both the floppy and the Boot Partition.It works from the floppy(only using PC-DOS however).
When started from the ghost console boot partition it pauses after displaying the MAC address of the card which after a few minutes it displays an error message "command interpreter missing (command.com)".
I've gotten the scenario to work with a Broadcom Gigabit Extreme network card, haven't tried this with an Intel Pro 1000 NIC (as opposed to the onboard NIC) to eliminate the driver as the culprit. I suspect this might have something to do with the SATA configuration.and no, the -FNI or the -NOIDE switch will not work in this situation as the *.exe that starts on the boot partition is ngctdos.exe and not ghost.exe.Which, I'm assuming is the app that listens for instructions from the Ghost Console.
I am wanting to move an existing wireless LAN PCI 802.11 b/g adapter WN5301A card from another tower computer into my Optiplex 755 mintower. Is this compatible, or do I need to get a different wireless card?
View 2 Replies View RelatedI have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]
View 3 Replies View Relatedi have a Dell inspiron 1520, the ethernet port has stopped working- no lights when cable connected. this was fine and then just stopped, it is used to connect to hub from time to time when wifi goes down. have tried 3 different cables, no joy, these all work in another laptop. No issues shown in control panel/ hardware. Have downloaded driver from Dell site, still nothing.
View 1 Replies View Related