Internet Connection Sharing - Tweak ICS Settings
Oct 11, 2012
I'm working on getting into Internet Connection Sharing (ICS from now one). I'm doing this for a number of reasons: I do have a network switch I hook my computer into. But, for a period of time each night, I have to unplug it. Don't ask me why. It's a long story. I do have wireless adapters that I use. However, they stopped being fully functional when we got a new wifi. But, we're not returning the wifi because all the laptops and smartphones can connect without any issues. Instead, I have opted to connect my desktop to my laptop via ICS and share the laptop's wifi. I was able to configure the IP addresses and Mask so that I could see the shared folders between the two computers. That's about as far as I got. How do I make it so the laptop shares it's internet connection with the desktop? [code]
I thought I might need to tweak the setting in ICS under the Settings button. But, I wasn't sure which IP address to use (most online instructions state that DHCP will assign the addresses and don't go in-depth or they have a rather bizarre IP setup).
View 3 Replies
ADVERTISEMENT
Jan 25, 2011
I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies
View Related
Oct 4, 2011
I'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies
View Related
Sep 26, 2011
Im planning on implementing a forefront tmg on my server, normally id connect the modem straight into the switch but to make sure all the traffic goes through the software firewall ive connected it through the servers integrated nic.So now ive got lan access to the modem and its webgui but no Internet access the ip of the nic is (192.168.0.11,255.255.255.0,192.168.0.10) and the modem is set to 192.168.0.10But again no Internet access is detected and i cant ping the isp's dns servers.Just so you know where im going with this i plan to use a static route and nat (built into forefront tmg) to forward all wan traffic through the integrated nic. Ive already tried to use PPPOE with the above setup and im able to share the internet over the entire network using routing and remote access in server 2008 but installing forefront on top of this configuration isnt supported as forefront takes over routing and remote access with no demand dial support.
View 3 Replies
View Related
Dec 14, 2012
I have a Compaq Evo N610c with XP Professional version 2002 SP3 that cannot connect to my internet connection. Has error that failed to query TCP/IP of the connections setting.
View 1 Replies
View Related
Mar 30, 2009
Is it possible to "tweak" the SNR on the WAG160n?
View 4 Replies
View Related
Jul 15, 2011
I newly installed win 7 in 2 pc's. I had used the internet connection sharing when I had Win xp installed in them before. So I gave the static IP address,192.168.0.1 to the pc with the internet connection, and had the other pc obtained the IP address automatically. File sharing works fine, but somehow the 2nd PC could not be connected to the internet. When I checked its connection details, the Autoconfiguration IPv4 Address was 169.254.224.63. I think this IP address should be something like 192.168.0.xxx, but it's configured to auto, so I can't really do anything right now
View 1 Replies
View Related
Oct 23, 2011
Recently I took a single braodband connection, I want to share that connection to two of my computers with out HUB,
View 1 Replies
View Related
Dec 13, 2011
how to share my pc's internet wireless connection with my macbook pro in order to get the mac online. The pc is an hp wireless laptop, the router/modem is a cisco.do I just connect the macbook through the router.
View 2 Replies
View Related
Nov 12, 2011
i have a "not so fast" DSL connection at home and i need it for work. unfortunately for me, i have 3 siblings, each having their own laptops who abused the bandwidth by downloading stuffs and streaming videos. i have the idea to share them connection by reconfiguring the current network topology (internet--modem--wifi router--my desktop--3 laptops.) to (internet--modem--NIC 1 of my desktop--NIC 2--wifi router--3 laptops.) using windows ICS and bought ANTAMEDIA BANDWIDTH MANAGER in order to prioritize the connection to my Desktop.
View 2 Replies
View Related
Dec 10, 2011
I have been wanting to share the wifi on my laptop with my desktop. However whenever I enable ICS on my wireless connection and then plug in the ethernet cable to my laptop and my desktop, the wireless automatically turns itself off and only the LAN connection between my laptop and desktop is active. I have done a lot of googling and read a lot of forums, but unable to find a way wherein I can let my wifi remain enabled even after plugging in the LAN cable.
View 5 Replies
View Related
Jan 22, 2012
Iam unable to share my internet connection.I am unable to use it on a router even.When i connect it to my laptops Ethernet port its working fine.But when i connect it via router its just showing internet access but i m unable to open any pages.
View 1 Replies
View Related
Feb 26, 2011
I have a laptop (Win XP SP3) which connects to the Internet via wireless connection. Configuration is as follows:
Laptop connects to AP1 (wireless) AP1 connects to AP2 (ethernet cable) AP2 connects to AP3 (wireless)(AP3 is somewhere in the neighbourhood, i dont know where) Some of the APs or all of them may work as bridges, i dont know since i do not have access to their interfaces. I have a desktop, which is connected to my laptop with a crossover ethernet cable.
Wireless connection details:
IP: 192.168.1.72
Mask: 255.255.0.0
Gateway: 192.168.3.2
DNS: 192.168.3.2
LAN details:
Laptop's IP: 10.10.10.1
Desktop's IP: 10.10.10.2
Mask: 255.255.255.0
I want to share the Laptop's internet connection with my desktop. Tried ICS, bridging, etc. but nothing seems to be working.
View 5 Replies
View Related
Mar 5, 2013
I'm trying to connect my Xbox 360 to a VPN with internet sharing, but whenever I click "allow internet sharing" on the VPN I get errors like error 800 or error 714 that say things like "couldn't esablish vpn connection" or something like "security settings not compatible." I've also tried remaking the VPN and turning off the firewalls but nothing works. Also, I've heard that I can use a bridge connection instead, but don't I need a wireless connection for that? If so, how can I do this?I'm using a PC with Windows XP and a DSL/Broadband wired connection for my PC and Xbox. My local area connection is: Realtek PCIe FE Family Controller.
View 2 Replies
View Related
Jan 23, 2013
I, like OP, use my PC to sign into Xbox LiveI've never had problems with it before, not ones that I couldn't solve, and have set it up a number of times after reformats or new installations of Windows, so I usually am able to figure out the problem on my own without necroing old threads. But this time my luck seems to have run out. All of a sudden a few days ago, my Xbox refused to sign into Xbox Live. There seems to be a problem with my Xbox recognizing my PC's internet connection, because when I do tests they never get beyond the 'Xbox 360 to Network' stage. I did the usual steps that are given in the troubleshooting section but to no avail.
I looked at my network connections in the control panel, and it seemed my Xbox connection was set up for ICS, rather than my computer. It dawned on me when I figured out that the reason the 'Sharing' tab wasn't showing up for my PC's connection (in the Properties tab) was perhaps because the other connection had it enabled. Sure enough when I disabled it for the Xbox, the Sharing tab showed up in the Properties for my PC's connection. Only, when I go to click it to enable it and press OK, it gives me a message: "An error occured while ICS was being enabled. The dependency service or group failed to start." I thought perhaps it meant my Xbox connection but that doesn't seem to be the case, as the message appears whether its turned on or off.
At this time I'm also awaiting a new video card, as my current one died on me yesterday, which was a day or two after this Xbox connection problem arose...great timing, right? I'm currently operating in safe mode with networking, and I know that certain windows operations don't work in safe mode. Perhaps this error message I'm receiving is due to me being in safe mode? I have no other options until the new card arrives, as starting Windows up normally went from being a really fubar screen to being a completely black screen upon start up. So I guess my question is...am I unable to enable ICS while in safe mode? And if so, why was I able to disable it while in safe mode for my Xbox's connection? That's really annoying.
Some of the things I've seen while looking foXbox ethernet can go bad, i.e. through static shock frying it. I've had some problems with my surge protector that are quite strange. Sometimes it will start to beep continuously really loudly until I disconnect it. And then I have to unplug everything from it, plug the protector back in, and reconnect everything, in that order otherwise it beeps at me in disgust. But there's no pattern to this. It once did it twice within a week, then the next time it did it there was about 3 weeks in between. Perhaps this is partially to blame for the video card crapping out...perhaps it did something to xbox? But one would think it would cause something like a RROD, rather than something so specific as the ethernet port.
View 4 Replies
View Related
Aug 7, 2012
I use my phone as a modem with PdaNet for my computer to have an internet connection. I play Xbox Live with it all the time, but recently when I try to share the connection, it says Error 765 : Cannot Enable Shared Access".
View 2 Replies
View Related
Jun 5, 2012
I've got a new Cisco srp527w-u router which is working fine though it's syncing at a lower rate than my Billion (6mbps vs. 8.5 mbps for the billion on the same line). I had tweaked the billion way back to connect with a 4db SNR margin and almost certainly this is why it achieves the higher rate (by comparison the cisco is syncing with an snr margin of 12db). Is there some way that I can configure it to use a lower SNR margin? I realize this might reduce connection stability but I'd at least like to be able to give it a try if possible.
View 2 Replies
View Related
Jul 3, 2011
I want to share my wireless connection witch is coming from distant internet provider, to my desktop computer with wireless adapter. I have tplink wireless router witch is connected trough wan port to my lan network card also in desktop computer.So is there something wrong with this setting because i can not properly finish wireless router auto configuration wizard, it always return my error.
View 1 Replies
View Related
Jan 18, 2012
I was wondering if it is possible to share my internet connection to specific computers on my home network. Both my laptop and desktop computer is connected to the same Wi-Fi router (no internet connection). This network connection is mainly used for file sharing. I want to share the mobile internet connection on my laptop with my pc without giving the other computers on my network access to the internet connection and without disconnecting from the home Wi-Fi router. Is this possible and if so how
View 2 Replies
View Related
Sep 14, 2011
Internet Connection Sharing. On one of my pc's with Win 7 I try to use ICS and it does not work. I have tried forcing the ip address on the LAN connection on the host computer (192.168.0.1 or something) and it will not assign an IP address to any device hooked up to it.On my macbook running Win 7 and all the settings the same, all of the same devices work fine. I tried using a cross-over cable and switch (not at the same time) with no luck. Not using any firewall and I've tried for days.
View 1 Replies
View Related
Dec 3, 2012
So I'm trying to set up my computer to act as a virtual router so I can connect another device to the network.I can successfully create the network but it doesn't seem to be sharing my internet. I believe the problem may be that on the sharing tab for the initial internet connection there is no drop down menu like the one below.
View 5 Replies
View Related
Sep 12, 2012
I used to share the internet between a Win 7 Home edition machine and a Win 7 Starter through ad hoc connection.(The Win 7 Home machine has the internet cable connected to it). I have noticed the Internet Connection Sharing button missing from the Win 7 machine for awhile now. As far as I remember I did not do anything untoward the Win 7 machine.
View 1 Replies
View Related
Jul 19, 2012
i currently have a windows XP Pro machine alongside a windows 98SE machine. the windows XP machine is connected to my network via a wireless network adapter. But, i need the windows 98 machine connected to the internet as well. (i have to use windows 98 because of a program i use only works with DOS)
View 8 Replies
View Related
Jul 1, 2012
We have highspeed internet that comes in at our house, but we want internet in our shop. We have a wireless dongle outside of the building and it picks up the signal for the main computer from the main wireless router. Because it is a metal building we cannot get a wireless signal inside the building otherwise. I want to hook a wireless router up to the computer in the shop, share the internet connection, and broadcast the signal throughout the shop so I can use wireless in the shop.
View 1 Replies
View Related
Jan 9, 2013
My ISP provides static ip based internet connection. I have setup my D-link DWR-113 router to access internet through it. I have also turned on DHCP in the router. But when I try to access internet using both of my computers simultaneously it doesn't work - none of the computers is able to load a webpage. And when I leave one computer I am able to surf without any problem.
View 6 Replies
View Related
Apr 27, 2011
I recently moved my internet provider to Sprint 4g and I am using their USB modem (U600) I have successfully set up Internet Connection Sharing (ICS) between two Windows 7 pc's using an ethernet cable. Would ICS work with a wireless PCI adapter? effectively making my desktop that the modem is plugged into a wireless router.
View 1 Replies
View Related
Jun 22, 2012
I need to share the internet.
View 1 Replies
View Related
Feb 27, 2012
I am trying to setup my Internet connection on my linksys E1200 router using static IP settings below -I am getting following error when trying to do this. These are the IP settings provided to me and are configured on my laptop to connect to my ISP as well.
View 6 Replies
View Related
Nov 24, 2011
I've had my WRT54GL for a few months now and have two computers that are wired and 3 that are wireless. I started having problems with conflicting IP's a couple days ago on one of my wired computers which was set for auto DHCP so I changed the settings and made it a static IP, this is when the problem started. I have Network Magic on all computers and even though it says I'm connected to the internet and the network, I am not able to get online. My other wired computer has been on Static IP for months and works fine.
View 9 Replies
View Related
Mar 3, 2013
When ever I play a video a pop up will occur pertaining to permission for some site or another to store some of their information on my computer, I can choose accept or deny. I click on accept but the box just stays on the screen and I can't get rid of it. The only time that this box will pop up is if I'm reading any kind of story and there is a video to watch with it, I'll read the story then click on the video and then the box pops up and I tried clicking the accept then the deny buttons but nothing happens. Once in a while if I keep clicking one or the button repeatedly the box will go away but by the time that happens, the video is over. All I wanna do is change the settings so it will never pop up again. So how do I do that
View 1 Replies
View Related
May 29, 2011
I live in an apartment and I am forced to only use the apartment's internet service to go online. There are two ways to access the apartments network; via ethernet port or wifi. Once im connected and try to browse, I will first be taken an http login page to enter my username and password. The problem with this is I can only use the username and password for one computer at a time. Trying to get my second laptop to access the web using the same user and password will give me an error saying it is currently being used. As I have two laptops (work and personal), I would like to share the internet connection using a device that will allow either or both machines to connect simutaneously. What device will I need?
View 8 Replies
View Related
Nov 18, 2011
Im using a usb wireless connection to the internet i want to share this connection with other computers connected through both wired and wireless connection on a network. I was able to do this in XP but having problems in Windows 7
View 3 Replies
View Related
Feb 8, 2011
Is there a way for me to connect my desktop PC to my laptop, & use the laptops EDGE/GPRS modem in the PCMIA slot of the laptop to access the Internet? I also have a wireless router that is not being used for anything, however, I use the laptop to get online, & I'd like to share that connection with my desktop at home.
View 1 Replies
View Related
