I tried already several times, may be I entered already a name and password, can`t remember. Anyhow this time I was well documented to start again, but after 192.168.1.1, leaving 'name' blank, and password 'admin', this was quoted as wrong name and/or password. What to do to be able to continue now?
View 2 Replies
I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
View 3 Replies View RelatedI have a Linksys X2000 modem. Sometimes I see the "Wi-Fi Protected Setup" button glowing orange (amber?) for no apparent reason. The manual says that it "blinks rapidly in amber if an error occurs" but I don't think any device is trying to connect wirelessly at the time. How can I determine if there is a problem?
View 5 Replies View RelatedI have Verizon FIOS internet/wireless router and then a WRT310N wireless router connected to it thru Ethernet cable. I want to disable DHCP in the Linksys, but when I try to access the set up page at address 192.168.1.1 the Verizon router set up page shows up. I've tried to connect the router directly to the computer, but it needs the internet connection from the Verizon router. How do I get to the set up of the Linksys at the same time the Verizon is using the same address?
View 5 Replies View RelatedI run a X2000 router for some weeks and it works properly basically - with one exception.WIFI attached devices (Win7, Vista, Android) can go to the internet without having any problem. But they cannot access my local servers (Media-Server, Storage server). I access with normal settings (not the guest) but the behavior is similar to what I expected from the guest-WIFI: protect resources in LAN.Anyway, for historical reason I have also another WIFI Hotspot in the LAN what is connected to the X2000 via cable. If the same devices connect to this hotspot, everything works fine. So the problem isn't caused by the servers.
View 9 Replies View RelatedOn my old router I could access the line stats on the home page giving me Attenuation and SNR margin, this allowed me to keep an eye on line quality, there seems to be no equivalent info on the X2000. Is this on a hidden page like the advanced wireless page.
View 1 Replies View RelatedI've never setup a router before, but when I tried to setup this one it required me to put in the isp ip, subnet, gateway, and dns. I assumed that this was not my ip but the ip of zoomtown which when i looked at the old routers info i figured this was the ip under the configurations summary that said wan ip, perhpaps i was wrong, i'm not sure but this ip info is static it does not change , but I believe the individual computers ip addresses use dhcp and are not static.
View 3 Replies View Relatedwhen i was on my linksys setup page 192.168.1.1 i accedently disabled wireless web access now i cant undo it so now i cant use wifi
View 1 Replies View RelatedThe WES610N bridge seems to work fine, but I cannot get into the web-based setup. I have tried using it directly through my laptop, as the instructions show, then through an Asus RT-53N as a router. I did have the 610 connected to my laptop's ethernet socket, where it provided internet through the Asus RT-53N wireless router just fine, but when I tried to access the setup, again, it would not work. Next, I tried it through a desktop and Linksys RVS4000, again nothing. I would like to check the firmware and see what else is in the menu.
View 6 Replies View Relatedi need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen
View 2 Replies View RelatedI have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default 192.168.1.1 address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.
View 9 Replies View RelatedI have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.
View 5 Replies View RelatedI'm able to connect to the internet through my E1200 router but I cannot access the router set up page. 192.168.1.1 doesn't work... I can connect to it just fine with my laptop however... so I changed it to 192.168.254.1 as per some internet instructions. Still can't connect via my desktop... Tried ipconfig /flushdns to no avail. Cleared the internet cache Upgraded the firmware (via the laptop) rebooted the computer rebooted the router... reset the router... After rebooting the router I can type in the username and password to access the router, but it never connects....
View 6 Replies View RelatedI need to set up a password for my wireless network, but every time I try to access the setup page, the router stops responding. I've gotten as far as it asking for username and password, where I enter admin as the password....and then nothing. The connection times out. I really need to protect my network.
View 1 Replies View RelatedWhen I had DSL, my WRT54G was my DHCP master for my home network. When I got AT&T U-Verse, their "gateway" became the DHCP master and also the wireless access point. But the signal was not strong enough where I wanted to use it, so I hooked up the WRT54G again. I discovered that if I connected the U-Verse gateway to the "Internet" port on the WRT54G Linksys, then my home network was split in two, which I did not want. The WRT54G access point is physically somewhat distant from my wired computer, so I wanted to keep the U-Verse gateway as the DHCP master. (The U-Verse gateway is a router with four "computer" ports but no "Internet" port.)
I followed instructions on the Linksys web site, and using my wi-fi connected computer I re-programmed the WRT54G to be "Disabled" as a DHCP server. Then I powered down and physically connected the U-Verse gateway to a "Computer" port on the WRT54G. This solved my problem: my distant wi-fi computer now has a good signal, and both computers "see" each other.
However, now I seem to have lost access to the WRT54G setup "web page." Is it possible to access the innards of the WRT54G when its DHCP service is disabled? Or would I have to reset the device to factory configuration and start all over if I wanted to make any tweaks?
My internet is T1 by Verizon. My mom's company Siemens pays for our internet because she works from home as medical tech support on the phone. Okay so the T1 had to be laid out to our house underground I think because where we live, other brands of internet aren't available. The T1 goes from the box outside into our basement and hooks up to a Cisco 1721 modem. From the 1721 the internet goes out to a wireless router that is sitting right next to it. This wireless router is a Linksys WRT160N V2. We have several cables coming out of the WRT160N V2 to go to the first floor for hardwired connections, but one cable goes to the attic and connects to a second wireless router. The second wireless router is a Linksys E2000. We have several cables coming out of the E2000 that go to the 2nd floor to serve as hardwired connections.Okay so let me explain where things went wrong.
After a storm our power went out. Eventually the power came back on, but every now and then our internet would shut off for like half a day then turn right back on, so our internet was getting really really spotty. The [b]AL[/b] light on the Cisco 1721 would come on every time the internet went out. It was so bad that my mom had to get an aircard from verizon to get internet. So after two weeks of spotty service and arguing with verizon trying to get them to come fix the problem, they said try resetting your wireless routers because they might have "bad data" in the lines causing spotty connection. So we reset the wireless routers by holding down the reset buttons on the back. Well.. this reset all of the settings for the routers which Cisco facilitated set up, and now our wireless routers are out of warranty date so they can't set the wireless routers back up. However, we have copies of the online wireless router set up page, so we thought maybe we could just set them up ourselves.Well the problem is... We don't know how to connect to the wireless setup pages.. I read something on the internet about setting up wireless networks and to type 192.168.1.1 into our browser(Mozilla Firefox) and that would bring us to the wireless setup page. But the page does NOT ever come up.
Another way to find the IP address of our wireless routers would be to try going to the cmd and typing in ipconfig and using the Default Gateway IP address for the browser to connect to the setup page but that doesn't work out either.... Right now I unhooked the Linksys WRT160N V2 and hardlined the Cisco 1721 to the Linksys E2000 to a PC on the second floor because I figured it wouldn't work out if we had two wireless routers running at the same time. Currently the browser is taking me no where at all. It just says "Connecting..." but nothing is loading up at all.I tried hardlining from the Cisco 1721 to my mom's laptop, which is her work computer, and I got no response at all. I figured it might just be her work computer that was messing up and not allowing her to hardline into the 1721 so I tried hardlining the Cisco 1721 straight to the PC desktop on the second floor(we have no other laptops other than my mom's work laptop) and nothing went through. Then my dad says the Cisco 1721 has been configured so it doesn't direct connect, meaning that it has to go through a wireless router.
I bought wrt54g2 several years ago and everything worked fine until this week. I got trouble with this router now.All the computers at my home couldn't access to this router even just connect to router's setup page at 192.168.1.1. The only way go to setup page through LAN Cable .I'm afraid maybe there's interference channel with my neighbor, then I did some change to router channel already, but the result same. I still couldn't access to the router through WIFI
Fyi, I did upgrade the firmware with the latest one and all the computers distance to the router not more then 5 m and in the clear area
I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?
View 9 Replies View RelatedI bought E900, accessed setup thru 192.168.1.1, upgraded its firmware.. then changed router's IP, it reboots, then went blank, I cannot access the setup page anymore?
View 9 Replies View RelatedHow can i add several vpi / vci to my Linksys x2000 ?
View 7 Replies View RelatedJust picked up a X2000 and Cisco connect configured my connection, and assigned an IP to my desktop pc.I configured my PC back to a Static IP which is outside the DHCP range in the X2000, and all seems to be working ok..now looking in the web-based X2000 setup screen my pc is no longer listed as a client...so should I manually add it as a client and assign the IP & MAC address in the Cisco setup or is this not necesary.?
View 5 Replies View RelatedI have the X2000. It has 3 ports. I need 4. I also have the WRT160N V3 router which has 4 ports. Is there a way to use this router with the X2000 to get the 4 ports I need ? If not, what are my other options to get 4 ports ?
View 2 Replies View RelatedI've tried everything to get this to produce an i.p address but to no avail.I check with my ISP (o2/BE) they told me all my settings are correct it syncs but just does not pick up an IP address.
View 6 Replies View Relatedlinksys x 2000 modem unfortunately, when I turned the modem on today, the power light which normally was white became red.I tried all the ways I knew, such as restarting in 5 or 30 seconds intervals but unfortunately it didn't work
View 3 Replies View RelatedTrying to replace old modem with the X2000 but it will not connect to the internet, my provider is ATT DSL.
View 2 Replies View RelatedI cannot get my X2000 to connect to my ISP in the UK. From what I've read elsewhere I'm not the only one but I need to determine whether this is a router support issue or ISP.
View 9 Replies View RelatedHow to change the frequency on X2000
View 1 Replies View RelatedI installed my new X2000 a couple of days ago and my ADSL connection drops several times a day. Sometimes it will stay connected for a few minutes and other times it will stay connected for several hours. The only way to get it connected again is to reboot.I have used 2 other routers (D-Link DIR-300 and BT Home Hub 3.0) on the same line and haven't had any disconnection issues with them, so the problem must be a hardware/software fault on this router or I have set it up incorrectly.Judging by a number of posts I found online, there seems to be a general problem with DSL connections dropping on the X2000, especially on earlier firmware versions. I have subsequently upgraded to the latest firmware (Ver.2.0.01 (Build 4)), reset and reconfigured twice, but nothing has worked so far.Unless I can get this working in the next few days I am going to have to return it, which is a shame because the performance of the router is great when it's working!Would someone be able check I have configured the DSL settings on the router correctly?
DSL SettingsEncapsulation: RFC 2364 PPPoAMultiplexing : VCAutodetect: DisableVPI: 0VCI: 38Modulation: MultimodeMTU: 1400
I have been setting up my new Cisco X2000 wireless router recently and I have it working fine for my desktop/laptops and even the PS3, however for some reason when you try to use the wireless on some of the other computers in my house it doesn't work unless you are using a wireless guest account.
View 2 Replies View RelatedCan the 2 WAN ports be connected at the same time to provide failover and if so can this be configured for priority/ delay etc.A user has a very poor ADSL service so also has a bidirectional satellite link. Due to the latter's high latency I don't want it dropping that connection too quickly.
View 1 Replies View RelatedSo its the 3rd day of my nightmare to set up this cisco ADSL router...
Status:
Setup:
DSL connection:
So I live in Ireland and im on Smart telecom ISP, Basicly the internet is half going - like skype is going and i can chat with my contacts, cisco.com page is going but really SLOW, google.com page is going until search, speedtest.net page is going until the mesure thing facebook loads like in 10min.. a lot of pages dosent even go...From main telephone socket to the router is only 2.5m telephone cable(NO HOME PHONE) so no splitter or extension... (Changing the MTU dosent change anything...only if i set it on auto then w7 shows that internet is connected, skype works but no pages at all is loading and is dropping with timeout error.. if i set to manual then something loads on pages...) The cisco connect software does NOT do good because I can go until the username/pasword step, I input THE CORRECT details but he just sayes that he cant authenticate the username & pasw... and so i cant get past that step and the programm is no good.... only way is to set up with 192.168.1.1!
How can I get Max network LAN speed from the X2000.I am connecting with a Macbook and an iMac both with N speed aiport cards.When checking the network speed through mac 'Network Utility' it is only getting 130 Mbps.Should it be getting closer to 300 Mps?
View 3 Replies View RelatedI'm having trouble with my Linksys X2000 modem/router to stay connected to internet. I have tried upgrading the firmware & changing my ip address, but still with no success.The router part is staying connected, but the dsl will drop off. I have to unplug to get it up and working again.
View 9 Replies View Related
