Linksys Wired Router :: EA2700 Accessing Internal Web Servers
Sep 20, 2012
I just moved from a Linksys wired router to the Cisco EA2700 wired/wireless router.I have three web servers on my network that serve up content via standard web URLs. For example, pretend www.domain.com pointed to the WAN side of my EA2700. Port forwarding routes port 80 traffic to the server, located on an internal, private IP (ie, 192.168.1.21).All works well when accessing these servers from outside my network (I checked this via my mobile broadband connection). But when I'm on a workstation internal to the same network as the servers, I cannot connect to the servers via the web URL. Of course, I can hit them via the IP or an internal-only DNS network entry. For example, when on 192.168.1.55 on a desktop machine, and I type the URL in the form www.domain.com, it just hangs and times out. I was able to do this on the old Linky router. Traffic should go stop at the router and be re-routed back internally to the port-forwarded server - but it does not.
I have to route properly via the web URL and not the internal DNS name or IP addy, as I am running virtual web servers on IIS on one of the servers.Is there a setting I failed to set on the EA2700?
View 6 Replies
ADVERTISEMENT
Jan 24, 2013
I am not able to access the web interface of the router.No, i am not using cisco cloud or smartlink .. yes, it has the latest firmware (Ver.1.0.14.129982).Yes, I might be able to get to it if i shut down the router and turn it on again a few minutes later, but the problem is.. why? why do i have to interrupt connections and not have internet to log into the admin web interface of this device? Is there a known problem with it that makes the webservice go down?.. or to take extremely long to respond and thus the browser to quit on it throwing an error?
View 3 Replies
View Related
Nov 22, 2012
I just got a new EA2700 and I notice that there is no way to get the same downloads speeds in wireless when compared to wired.Wired to my SHAW Cable modem I get 50 Mbps when I go wireless I get simply haalf of that. I spent almost 2 hours with the Linksys support on the phone and they said my router was bad.I do not buy that but it seems that something is not clear, or Linksys do a bogus advertisement saying that we can get 10x more speeds with this generation of routers or wireless technologies are just like that, cut your wired downloads speeds in half. Getting half download speeds in wireless connections versus full when wired?
View 9 Replies
View Related
May 9, 2010
I am experiencing loss of internet access when browsing to amazon.com. In addition to losing internet access, I am unable to connect to my BEFSR81 router when this happens. To resolve I have to walk over to my router and reset it by cycling the power.
This issue has been reported by other users of the BEFSR81 too: URL
Details: My BEFSR81 is version 3.0 and is running firmware version 2.51.4
View 9 Replies
View Related
Mar 10, 2012
I am converting from a Cisco Model 850 to a RV042, all is well so far but I cannot implement one feature I had on the old router.I want to do one to one nat from one internal ip to one external ip but I only want to use one tcp/ip port.The command to do this on the old cisco 850 was this:"ip nat inside source static tcp 192.168.1.181 80 75.xxx.xxx.181 80 extendable"Can this be done with the RV042?I can do one to one nat but it include all ports.
View 1 Replies
View Related
Jul 4, 2011
Final results are that if I hard ware connect my computer to my PS3 I can acces Media Servers.When connected through the router though my computer acknowledges the PS3, it cannot connect to Media Servers.I have the Linksys BEFSR41 v4.3.
View 3 Replies
View Related
Mar 20, 2012
Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?
View 1 Replies
View Related
Feb 9, 2011
how to block a user from using the internet when they plug their computer into a router. My roommate has refused to pay her share of the internet and, being a college student, I don't have enough money where I feel generous enough to let her have free internet after stiffing me. Basically, I have 2 routers at the moment (hoping to fix this soon): my Qwest modem works as a router but I also have a Linksys router connected to it. The only phone jack is in her room so I have no way of stopping her from plugging her computer straight into the modem and/or router. I've configured the wireless so that she would be unable to access the, wirelessly but I'd like to know how to prevent her accessing the internet when she plugs her computer directly into either component.
View 2 Replies
View Related
Oct 12, 2012
Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies
View Related
Oct 6, 2011
Ive run into something a bit new to me. Networking! Now i do have some experience but not enough for me to figure this one outHere is what i am trying to achieveWe have a webserver at the office which i can access from the outside world. We also have a local server with a static internal ip(File Server)My question is as follows can i add a link on a web page on my webserver to that i can access the internal ip address from outside the office?
View 13 Replies
View Related
Jul 2, 2012
i have configured my ACS 5.3 server to access AD for user authentication but i would as well like to use the internal store for some users.The problem is that when i test with an internal user account, i can see in the logs that it still tries to access the AD for this user and i receive a message in the logs. " 22056 subject not found in the applicable data store".i have already defined the identity sequence to first use the AD, then if user not found, use the internal database.
View 2 Replies
View Related
Jun 4, 2012
I have a Cisco 5505, 2 sites that are internal, 1 external IP (dhcp from cable modem). While on my laptop, ipad, iphone, I cannot access the server via it's external IP address. I MUST use the internal IP in order to access this site. I have heard of hairpinning, internal dns server(don't really want this).
View 8 Replies
View Related
Nov 13, 2012
we recently upgraded from an RVS4000 router which didn't have this issue.
the problem; Internal users from Site A cannot access the external owa address.From Site A i can successfully ping both the external/internal IP addresses/names and they resolve correctly, including pinging the address ('mail.company.com") resolves correctly to the external ip address.
[code]...
View 1 Replies
View Related
Jul 5, 2011
Got a problem accessing our webservers on the inside interface from other clients on the inside interface on our ASA 5505.As in, they type in url... in their browser, and it wont work.
However, if we use a PC on another outside network, it works just fine! [code]
View 2 Replies
View Related
Oct 30, 2012
Got an ASA5525-X with 8.6 release. We have an inside interface (10.11.1.0/24) and a DMZ interface (10.254.1.0/24). On that DMZ interface theres an SMTP server; by using the Public server feature in ASDM we created a rule so we have mapped the 10.254.1.29 internal ip to an external ip 217.x.x.x Everything is fine; working ok, but for several reasons we need to access the public ip 217.x.x.x from an inside ip (10.11.1.10). I tried to do it by creating an exemption for the dynamic nat; if i don't do that i have a 'deny ip spoof from...' message rolling on my syslogs.Seems to do the trick.....but only for pings! i ping the public ip from the inside ip, and got the reply from the internal ip on the DMZ. But if i want to telnet port 25 from inside to public; its not working.
View 7 Replies
View Related
Jan 24, 2013
I’m working with a managed switch that has three V LANs setup on it. Recently the domain changed and the wireless V LAN can no longer access the internal website. I found access rules, in the switch that allowed the wireless V LAN to use the DNS server on the private/staff V LAN. Their DHCP scope is on the switch and DNS is set there. The Website is also on the V LAN with the DNS server. This configuration totally cuts out external DNS usage. It stopped working though. It is as if when things switched on the Domain the wireless users were denied DNS requests. The switch was not touched at that time. I’m looking at it though and it seems that I may have conflicting rules.
The version is 12.2. I believe its a Catalyst 2600~
DHCP scopes: ip dhcp pool INSIDE network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.6 192.168.1.4 domain-name saline.lib.mi.us
ip dhcp pool WIRELESS
network 172.16.0.0 255.255.255.0 default-router 172.16.0.1 dns-server 192.168.1.6 192.168.1.4
Here is the V LAN Setup:
Interface Vlan1
ip address 192.168.1.1 255.255.255.0
[code]...
Here are two access lists that should be allowing the traffic from 172.16.0.0 into the list IPs/Ports. These do no work.
ip access-list extended WIRELESS-PRINT
permit tcp 172.16.0.0 0.0.0.255 host 192.168.1.12 eq 30044
permit tcp 172.16.0.0 0.0.0.255 host 192.168.1.12 eq 21326
permit tcp 172.16.0.0 0.0.0.255 host 192.168.1.12 eq 6987
[code]...
During my testing I removed the Deny rule and everything worked. deny ip 172.16.0.0 0.0.0.255 192.168.1.0 0.0.0.255
However, the “ permit ip any any “ rule, makes all the port rules pointless because when this rule is in place solo, I can ping and access everything on the 192.168.1.0 network. Is there a way to deny everything, except what I permit? Because when I remove the ip any any, then they cant even get out. Perhaps there a better way to say, the wireless users can get out but only get into the sub net over specific ports? I have a feeling it may have not be thought out entirely when initially created. However, the big mystery is that it worked before secondary domain controller failed.
View 1 Replies
View Related
May 26, 2011
i am trying to use windows server 2008 R2 as a host machine, and i will be using windows server 2008 R2, and windows server 2008 serverCoreR2 as guest virtual machines. I have two NICs on my computer, and my computer has the memory, the hard drive space, and the cpu to handal this.
View 1 Replies
View Related
May 10, 2012
i got an ea2700 and i cant get the external to work internally which i need for server tests now this has worked before on every other router i had without any editing done but this one doest allow that so what can i do to make it work with this router?
View 9 Replies
View Related
Apr 24, 2012
I recently purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), ccess the settings, etc but cant reach the net. I've tried turning off the firewall, flushing the DNS, disabledthe IPv6. Did all the basic steps, resett the modem/router, etc...nothing. i hook the Belkin up and it connects just fine
View 9 Replies
View Related
Nov 26, 2012
I have EA2700 Router which support to be a dual-band wireless router and I am trying to connect to my router using 5 Ghz band with AE2500 Dual-Band Wireless-N USB Adapter, I am only seeing 2.4 Ghz wireless band plus even if I manually enter my 5 Ghz SSID my network adapter still wouldn't work on 5 Ghz band. Is there any specific set up in order get 5 Ghz band to work?
View 3 Replies
View Related
Feb 6, 2013
My first issue with this device is when I try to untick NAT to disable it I lose my internet connection. This also disables access to router's address 192.168.1.1 forcing me to reset the device and set it up all over again. Why is this happening? I tried this at least five times with the same result. Second question I have is if the DHCP reservation is the right option if I want to forward ports for certain applications like Vuze? When the DHCP reservation window opens I see all my wireless devices in the list (laptop, phone) but not the main computer which is connected through ethernet port. But that is yet another problem.
I've got a cable modem, connection is set to Automatic DHCP and I all want is to disable all firewalls, NAT and other unnecessary protection that's slowing my internet speed, set up MAC address filtering, port forwarding and close this terrible software so I never have to see it or think about it ever again.
View 2 Replies
View Related
Apr 30, 2013
i have a EA2700 router and I'm connectied wirelessly to my PS3. If i am not hosting a game i will be lagging all over the place yet it says i have full connection to majority of games that i connect to. i paid 115 dollars for this router and am very dissapointed that its doing this. Also no there is no way for me to connect wired to the router it is to far away. Also i tried bringing my ps3 to my friends house and played on his wireless connection and it worked perfectly so its deffinetly my router.
View 3 Replies
View Related
Mar 15, 2013
EA2700v1 WPS-PIN using 5GHz does not work. This router includes WPS header in its 5GHz beacon and probe response but the router removes the WPS header from them once WPS-PIN starts. There is no problem with WPS-PIN using 2.4GHz.
View 1 Replies
View Related
May 14, 2013
I want to change password in my EA2700 but don't know how to do it. How to change password in EA2700?
Looking for [url]
Find the best [url]
View 1 Replies
View Related
Mar 19, 2013
Im not able to conect to the internet threw my router, but i am able to with my modem. i dont want to pay for a new one and Cisco wants me to pay $30 for phone support.
View 9 Replies
View Related
Nov 19, 2012
If I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ? If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?
View 3 Replies
View Related
Dec 23, 2012
My new EA 2700 disconnects from the internet if the desktop is idle for more than 30 minutes. needs to be unplugged for a few minutes then it will reconnect. This is an unacceptable situation and this thing will be tossed if it cannot be fixed. Can this be reset so it won't disconnect? or do I need to replace it with a product from another company?
View 1 Replies
View Related
Apr 19, 2012
I have an Cisco EA2700 router and a Motorola SB6121 modem. If I'm connected to the router wirelessly or through any of the lan ports, I can't visit the modem's diagnostics page at 192.168.100.1. If I connect directly to the modem, it works fine. Also I cannot ping the modem through the router, just get a timeout. My ISP is Comcast.
View 9 Replies
View Related
Sep 20, 2012
I have tried all the speed test sites and tried downloads with and without my EA2700. Every test shows about half the perfomance when connected through the router. My speed tests at speedtest.net with a direct connection are in the 21-26Mbps range, the same tests run about a minute later through the EA2700 fall in the 10-12Mbps range with spikes up to 17Mbps.I've reset the router and modem.I've gone back to the 1.0.14.129982 Firmware (which it's currently on)I've set the MTU everywhere from 1400 to 1500 (literally EVERY setting for at least a couple of hours) it is 1492 currently. None of these have worked. In addition, when a large stream starts, such as a Steam download, I will lose ALL connectivity. Going in to Network and Sharing and clicking to connect to the internet restores the connection, no need to reset any hardware (which is odd in itself). I have had MANY routers over the years and I've all but exhausted support with service provider as the connection is solid if I eliminate the router.Main machine is a Windows 7 Home edition Total of 5 machines, 3 of which see regular use All machines go through a Trendnet 16 port switch and performance is the same direct or through the switch I m on Brighthouse in Central Florida and have all but exhausted their support.
View 4 Replies
View Related
Sep 11, 2012
I recently bought an EA2700 in hopes that it will make my connection faster, stronger signal and stable. However, this is not the case. The connections keeps dropping and the range is the same as my Verizon-FiOS router. Anyway, I'm hoping that a fix be distributed to address this issue. I can't return my router to the vendor anymore.
Now, since I have two routers, I want to be able to leverage EA2700's dual-band feature and the Guest-access feature but I can't make this as a main router since my FiOS router should still be able to supply IP addresses to my cable boxes, thus, I can't configure it as a Bridge. I'm thinking if I just split the IP distribution as follows:
FiOS router: 192.168.1.2-110
EA2700: 192.168.1.111-150
View 4 Replies
View Related
Feb 7, 2013
I have a linksys EA 2700 with the latest smart wifi firmware. However, the "Release and renew" of the IPv4 internet ip is greyed out. Only IPv6 is enabled.
View 1 Replies
View Related
Dec 31, 2012
went through setup twice, double checked connections, bought new ethernet cable from router to computer, still not connecting. However when i go from my modem to computer i get connected. could i have a faulty router. the router is new from walmart the ea2700.
View 1 Replies
View Related
Feb 2, 2013
Every time after the router (Linksys EA2700) is powered off and restarted, there is no interent access available. The router configuration status reports an Internet Address of 0.0.0.0 and all the devices at home are left with a wifi without Internet access. I have to unplug the WAN from the router and plug it in again while it is turned on to restore internet access (and a normal Internet Address is seen from the status page). The WAN works fine with the routers I had previously. I wonder if I have to perform this every time I power on the router. I have tried resetting the router and reinstalling Cisco Connect but that didn't work.
View 3 Replies
View Related
