I have a linksys router and a AE1000 adapter. When I first plugged in the adapter I had internet problems, always had to reconnect it. Then suddenly it worked flawlessly online and in video games. Now youtube videos load slower and I will get random lag spikes in game that last 5-7 seconds. I have done nothing to change the adapter, it just does this out of random.
View 9 RepliesI've been getting lag spikes with the WUSB600N. I am using Windows 7 64bit with service pack 1 installed. I had drivers version 3.0.1.0 installed and upgraded to version 3.0.10.0. After upgrading the problem got so so bad that I can't play online games at all. I tried rolling back drivers to 3.0.1.0 but it won't go back. I already tried reinstalling the drivers a few times and even reinstalled windows.
View 5 Replies View RelatedEver since i upgraded my os from windows xp to windows 7 i've been getting lag spikes at least once every 5 minutes. With my ping going up to 1500 easily and staying up there for about 20-30 seconds. My brother is connected to the same router as me and he isn't experiencing any issue's with his internet connection (He is also using windows 7). Is this a common error?
View 5 Replies View RelatedWhen I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies View RelatedI'm running Windows 7-64 bit. The AE1000 works great so far, in the one day I've had it, and it appears to start itself and connect when turning the computer on (unlike other people on here that I've seen). BUT, it's all pointless if I can't put my computer into standby. The adapter kicks it right back out as soon as I try to sleep the computer.
I've checked the device settings and "allow the device to wake the computer" is unchecked (in fact, it's grayed out). I rarely turn off the computer; I much prefer to just put it in standby. I don't want to have to unplug the adapter every time I do that.
We're using our Sprint hot spot and want to make a wireless connection to the TV...can I use the AE1000 for this? If not, what do I need to use?
View 2 Replies View RelatedI had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies View RelatedBought the AE1000. Hooked it up to my desktop computer (Sony VAIO), and it immediately recognized my wireless network in my house. However, when trying to log on, it asks for the network key, which I correctly enter and it attempts to log on, but fails to connect! I have called Linksys, and they claim it is my ISP's fault. I called Comcast (My ISP) and they claim it is a faulty product.
View 3 Replies View RelatedI bought a the AE3000 wireless adapter because I got a new DPC3925 modem/router and its signal is really weak. When I play games, it lags/disconnects for a second or two then resumes. Plus it also screws up my wireless mouse at times. I changed my wireless adapter back to my old high gain G adapter and everything seems fine.
View 1 Replies View RelatedI'm using my AE1000 to connect my computer in my home office to the router downstairs. The problem I'm having is my neighbor's routers show up on my network connections and it ends up slowing down my internet. Is there any way I can keep my adapter from trying to connect to my neighbors?
View 2 Replies View RelatedI have a Cisco Linksys WRT120N wireless router in one bedroom. On another bedroom which is hardly 15 feet away, I have set up my laptop to connect to it via a Cisco Linksys AE1000 wireless USB adapter. There are two thick walls between one bedroom and another.
Neverthess I find AE1000 dropping connection all the time. There are times I unplug the laptop and take into the same room as my router but it still doesn't connect. The wireless strength constantly varies from Very Good to Excellent but no matter what I try AE1000 never connects to it. If I restart my laptop, sometimes it does connect.
All in all its very frustrating that two Cisco products can't communicate effectively with each other.
P.S: I have both my ASUS tablet and my verizon droid both connecting to the wireless router from the same room as my laptop without any issues.
Trying to install on Wi 7 32 bit. When starting driver installation I receive an ACCESS DENIED error and the driver does not install.
View 1 Replies View RelatedI've been using my AE1000 for about a month now with absolutely no problems. Yesterday it just stopped working, I removed it from the USB port and just about burned my fingers on the metal part that plugs into the USB port. BTW I am on Windows 7 64-bit.
Now it won't work. I've tried reinstalling the driver and the device just blinks in the "Devices and Printers" control panel. I removed it again and it was very hot to the touch after only being in the port for about a minute.
When I insert the disc for my new AE1000, the setup opens automatically and begins to run. Before even letting me read the software end user license agreement, I get a screen that says the following: "Our Customer Support team can assist.Your Linksys Adapter was not successfully set up."I can not figure out any way to keep this message from showing up.
View 4 Replies View RelatedI recently purchased two of these units. One used with a quad core AMD rig and another with a single core AMD rig. Both systems are running Windows 7 but the older single core system is having issues. I noticed that I keep hearing the sound of a USB device being disconnected but wasnt sure what it was until I noticed when I try to copy large files over wireless the AE1000 disconnects from my system like I've unplugged it. I've swapped the two units and it didn't solve the problem. My newer quad core doesn't experience the issue at all. I've also tried different USB ports but that doesn't solve the issue either.
View 9 Replies View RelatedMy computer is a desktop in a differet part of the house, away from the main computer. My computer is hooked up with an AE1000 Wireless USB. This USB is wirelessly connected to a Netgear Extender (Repeater) for a better signal strength. This Repeater is wirelessly connected to the router on the other side of the house, plugged into the main computer.
So my problem is, when im working on my computer or gaming on my free time, it randomly disconnects. My signal has a (!) inside of a triangle at the bottom right of my screen. I run the automatic troubleshoot on my Win 7, and it says either "DNS server not responding" or "Your computer is working properly, but some of your devices are not responding". Other times it works just fine and i run troubleshoot alot and it doesnt find a problem. Some days its running at 144 Mbps others 6.5...
I have checked that all of the devices are uptodate. .I've contacted GeekSquad and they said there was no problem. But obviously for them to connect to my computer the wireless has to be working, so they didnt find anything because it worked for the time being.I'm just woundering are there any capability issues with my wireless? Or any other problems im not aware of?
From Cable>Modem>MainComp>Router(Cisco)>NetGear (Repeater)>Cisco AE1000 Wireless USB>My Comp.
Ive been reading the forums up and down about this device and i notice other threads with users having the "Exact" problem im having. Only problem is im noticing a simaalar theme to ech of those threads. The issue doesnt have a resolution.
With that said i figured i would give this a try regaurdless. The problem i have is very simple.
Windows 7 Yltimate 64 bit.
Motherboard: ASUS M4A785TD-V EVO
Proc: Phenom x6
Ram: 8 Gb
Ive tried all USB ports (2.0) on the computer and they all exibit the same said behavior. This being that when you turn the computer off, restart it, or put it to sleep...the AE1000 will not power on and has to be unseated from the USB port and then reseated before the device is seen by the system and then and only then does it fire up, connect and work perfectly.
The drivers i have used have been the ones off the CD, Then i removed those and downloaded the ones from the website. These drivers have been installed after removing the entry from device manager manually after attempts to use the normal method resulted in the same behavior.
Also i have installed this device on my Dell E6400, Dell D620 Running Windows 7 Ultimate 32 bit and 64 bit and they also exibit the same exact behavoir.
I am trying to connect a linksys adapter AE 1000 in my XP SP3 but during the CD-instalation appears that error:
AppName: setup.exe
AppVer: 1.1.10049.0
ModName: kernel32.dll
ModVer: 5.1.2600.3541
Offset: 00012a6b
And then a microsoft error windows shut down the installation.
I 'm very happy with the AE1000 & got it to work with my A31p by using a USB 2.0 adapter; (it only has USB 1.0) I think the ThinkPad PCMCIA card is faulty because it only works for a brief time & then dies (works fine with current machines)--then I noticed that the newest driver supports USB 1.0 but exactly how is that file implemented? I don't see .exe files, etc, & want to try to use the new driver--I'm using the latest XP--is there a step-by-step tutorial describing how to use the new driver?
View 1 Replies View RelatedDoes the AE1000 Adapter support Windows Pro 64 bit? If it doesn't, is there any Linksys adapter that does?
View 9 Replies View RelatedAfter a lot of googling and scavenging of specifications, I've yet to fully understand what is the difference between the AE1000 and the WUSB600N. I need a good wireless adapter to pair with my E3000, so I'd just like to know what the difference is (if there is one) and which one I should go for.
View 1 Replies View RelatedAre thay both the same hardware?what's the difference ?
View 1 Replies View Relateddifference between AE1000 and AE2500. Is this difference only usb base station?
View 4 Replies View RelatedSo I just bought and recieved a new computer with the wireless WMP600N.
I turned the computer on and a had small lags every 5th second or so which, even though they are small, are pretty annoying. I then tried to look for a reason as to why this happens and what i found out was that if a turn off the wireless internet connection the lag spikes stops and if I turn it on they occour.
My computers specs are:
I7 2600k 4x 3,40ghz
Nvidia geforce GTX 570
8 gb 1600mhz RAM
WMP600N wireless-N PCI
Windows 7 64xbit
I'm experiencing problems with the wireless adapter WMP600n. I'm a pc gamer, and as I play I get lag spikes with a ping up to 1000+! Also when I browse the internet, its insanely slow, or sometimes doesn't load at all. I looked for updates and manually installed them but no luck. I'm kind of mad since I spent $80 at staples for it. I'm using it with a wireless g router but I researched it before I bought it and it said it would work with wireless g, and I figured if we ever end up getting a wireless n router, I'll be prepared. Anyways, I want to enjoy my new computer but this gets me pissed.
Other information: OS: Windows 7 Home Premium 64 bit
I have a Linksys WRT600N wireless router. I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC. I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it. The signal strength shown is good, but it still can't connect.
View 2 Replies View RelatedThe product literature for the AE1000 says that you can select which band to use. However there doesn't seem to be an option to do that. I have an E4200 and when I set it up, it assigned my 5GHz and 2.4GHz bands the same SSID. If I configure the AE1000 to connect to that SSID, it seems to connect to the 2.4GHz band. Do I have to change the SSID for 5GHz and initiate a connection to it manually?
View 9 Replies View RelatedI purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies View RelatedI have an E1000 router and have updated the firmware to v2.1.02 Build 6. Also have the AE1000 Wireless-N Adapter and wanted to see if there were any new updates. According to this Linksys page the latest driver is Ver.3.1.12.0 (04/27/2012). I have downloaded the file and unzipped it to the desktop.
I am running Win 7 64-Bit so I opened this folder: C:UsersJOHNDesktopAE1000_Win7_3.1.12.0-WHQLWin7_64_v3.1.12.0
Which file will actually install the new driver:
netr28ux Security Catalog 9 kb; netr28ux Setup Info 11 kb; netr28ux.sys System File 1,563 kb; RaCoInst.dat DAT File 14 kb; RaCoInstx.dll Application Extension 320 kb
I have a Linksys E2000 router and have not had any problems connecting to it for the past year since getting it, until today.
View 1 Replies View RelatedI cannot use my AE1000 device for more than twenty minutes connected on windows ultimate 64bit.AE1000 doesn't startup with Windows 7 64bit.The led light still turn on when I turned off my PC.
View 3 Replies View RelatedI was wondering if the AE1000 is the best option for the the E4200 wireless router? Ultimately I want an adapter that can take advantage of the full potential of the router (as in the 450 Mbps wireless speed).
View 1 Replies View RelatedI am using a linksys E3000 router, and a linksys AE1000 adapter with XP system, for some reason adapter always has to reconnect, disconnect, reconnect. and even with good connection, it only has a maximum speed 144MBPS. How to reset the adapter or the router so it won't get disconnect so often and maximize the speed.
View 3 Replies View Related