Linksys Wireless Router :: E1000 Netflix Is Not Possible With All Re-buffering

Sep 19, 2012

Have an E1000 router, Samsung Blu Ray (for Netflix).  At night watching Netflix is not possible with all the rebuffering and drop in picture quality.  So we took the wireless laptop and set it next to the Blu Ray and started the same movie on both.  The laptop played without a problem and the Blu-Ray kept rebuffering. I will probably try to hard wire the DVD but to make it permanent, will be a real pain.  Having wireless would be much better. 

View 8 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200v2 Buffering When Play Youtube?

Mar 9, 2012

I have a Linksys E4200v2 couple days ago. After set up everything seem be working fine, accept my iPhone 4s. I can do almost things on my iPhone, but when I tried streaming video or streaming music from apps on the phone it stared buffering.... play..... and.... stop.... almost every 30s which never happen with my old Linksys E1000. And It happen with my wife's phone too. Even my internet speed is not bad at all (Ping: 24 / Download 23Mbs / Upload 4Mbs). So I can guess that problem from the router. Then I swap the E4200v2 with the E1000, everything works fine (it just a litle bit slower when loading at begin). 

View 1 Replies View Related

Linksys Wireless Router :: N900 Internet Slow - Videos Always Buffering?

Nov 1, 2012

I recently upgraded my router because my last cisco router was having a misdirect issue. Type in facebook and you get an invalid URL and would have to reset the router to get it to work. Now I bought a new Cisco router and am regretting it. The n900 was a pretty penny and now ALL my videos are always buffering. I have several computers connected, but not active. The internet is painfully slow with the new router, but lightning fast with out it.
 
Currently using my laptop secuirty settings are IPv6/ and 4  SPI Firewall Protection: Enabled WPA2/WPA mixed mode. 
 
I have tried everything: Rebooting, up to date firmware, resetting, What should I do next? Disable some of its advanced features? Cisco is earning a bad rap with me if a router that boasts high internet speeds makes all my videos buffer and load painfully slow. Let alone getting through all the commercials on the internet now. 

View 5 Replies View Related

Linksys Wireless Router :: EA3500 - Youtube Video Starts But After A Very Long Buffering Time

May 24, 2012

my ea3500 has problems with youtube videos. When i click to start a video, sometimes it starts but after a very long buffering time (more than 8-10 seconds), sometimes it does-not at all some other time, the advertisement  play but nothing happens after that (black screen). I have a fast internet access (30 MB up, 2 Mb down). I do not have this problem with the old router that the ea3500 is replacing ( a netgear wndr3700). On this old router al the videos are starting almost instantly.
 
I tried to lower the MTU of the 3500 from the default 1500  to 1400. No improvement. I tried to disable the WMM feature in QOS and by doing so i create another problem : i cannot access the 5 Ghz band anymore. I can see the SSID but cannot connect to it.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Netflix Will Not Stream

Dec 30, 2012

we just hooked up our ea4500. netflix will not stream from the wireless set.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Regularly Dropping Netflix?

Nov 18, 2011

When watching Netflix, I can get 5 to 15 minutes of a movie no problem. Then I will get an error message:Cannot connect to Netflix. try again later. If the problem persists

-        try again
-        exit
 
Then I can watch a few more minutes and it stops again. And again, and again......I have cable inernet service (Brighthouse Communications), with the E42000 connected to the cable modem. Then I have a Panasonic WiFi adaptor (DY-WL10) plugged into a USB port on my Panasonic Viera TV.   I have the latest firmware on the router (1.3.03, build 14).I have done the routine of re-cycling the network by re-setting the router (and re-setting it up) and the modem.The chat session guys had me do the following:
 
1)     Uncheck “Filter anonymous request”.

2)     Click on Setup Tab - Here you will see MTU.

3)     Select Manual & set the size to 1364

4)     On Wireless tab, clicked on manual, change the Channel for the 2.4 Ghz network to 9.

5)     When we tried it on the 5Ghz wireless they had me set the channel Width to 40MHz Only, and set to channel – 161
 
I also tried setting up port range forwarding. He knew the port information, and walked me through it.I have re-set the router to factory default settings, re-installed the software, and tried the previous steps twice more (except the port forwarding, because without my friend, I am not sure exactly how)  I know enough to not have multiple WiFi devices going at the same time while trying to watch Netflix, but I know that I get good WiFi download speed tests at the location of the TV with an iPad (3.6 MBPS).I have done troubleshooting on the internet service. It has a good, strong continuous uninterrupted speed.I have tried this on two different TVs (similar Panasonic models, bit with the same WiFi adaptor). Problem persists on both TVs.I tested it with a 50’ LAN Cable running from the router to the TV. Netflix worked when wired!Next test I want to do is to stream Netflix on the iPad, right at the TV and ensure that works.To me, this seems like a wireless router setting issue or an issue with the Network Adaptor, or an issue of communicating between the Router and the adaptor.

View 6 Replies View Related

Linksys Wireless Router :: E1500 Was Losing The Connection On Netflix

Feb 7, 2013

I bought this new router, and at first it seemed like it was working okay, but then i started noticing that my roku box (watch netflix) was cutting out all the time, losing the connection from the new  router. I also began to notice that if more than one person was online, pages took forever to load, can't watch youtube videos and even listening to music online like Pandora became difficult. Also it says that I can get up to 300 mbps but when i run the test I get .50 download and about 1.8 upload Details About Router & Connection,Its a Linksys E1500  with the capability of up to 6 devices and my IPS is Comcast.

View 1 Replies View Related

Linksys Wireless Router :: Wrt160n V3 Resets Constantly While Streaming From Netflix

Feb 27, 2010

I just got a linksys after years of using a single netgear, this is the second we've gotten in the last month... But each time we have the same problem, the thing resets constantly while doing streaming from netflix, over wifi, and resets the entire router. I've updated to the latest firmware but i'm ready to just throw this out and put our old netgear back up.

View 4 Replies View Related

Protocols / Routing :: Linksys BEFSR41 Router Disconnecting When Watching Netflix Through Wii?

Jun 23, 2011

While watching anything from Netflix thru my Wii gaming console, i keep getting disconnected and have to restart. When I plug the ethernet cable directly into the Wii, this problem does not occur. I have a Linksys BEFSR41 ethernet 4 port router.

View 2 Replies View Related

Netgear N300 Wireless Router To Stream Netflix?

Mar 18, 2012

I am using a Netgear N300 wireless router to stream Netflix movies to a Samsung Blu-ray player with wireless LAN. My problem is that some of the movies are not watchable because of rebuffering. About every two or three minutes into a film it rebuffs. Is this because of my equipment, my set-up, or is it just the nature of the beast?

View 1 Replies View Related

Netflix Streaming - Low Wireless Router Signal Strength?

Mar 31, 2012

I have a wireless network in my home, mainly for internet access via any of the 3 or 4 machines we may be using. Normally, there's not a problem with normal surfing, email checking, youtube, etc.My wireless router is a Linksys WRT300N, and the wireless adapter card in my desktop is a D-Link AirPlus G DWL-G510 Wireless PCI Adapter. In my previous home, the router was in the very same room as my desktop, and had no problems to speak of with this setup streaming Netflix. Now, however, I'm set up in an older home, and the router is removed from my desktop by a few walls and tight rooms. I've noticed that my network status icon on the bottom right of my desktop seems to always show "Signal Strength: Very Low".I like to use my desktop sometimes to stream Netflix. My Netflix streaming sometimes goes OK, but typically it just freezes and shows the Loading bar, and sometimes doesn't really start back. It is so bad sometimes, that I am not willing to wait it out, because I know from this experience that even if it starts back up, it will just freeze again. The video is not downloading and caching fast enough.

View 5 Replies View Related

Linksys Wireless Router :: Cannot Connect To E1000

Mar 26, 2012

I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?

View 2 Replies View Related

Linksys Wireless Router :: Guest Can't Use E1000

Dec 20, 2011

My guest can't use my wireless network and I can not add more devices like a ipad2. Got a new ipad2 for my son for Christmas been trying to set it up for Christmas, so on Christmas day I am not trying to do the set up. My problem is I can not get it to log on to the network. I have been putting in the same pass word all my other computers in the house use but it will not work...

View 2 Replies View Related

Linksys Wireless Router :: E1000 - LED Not Coming On?

Feb 10, 2013

My wireless router (E1000) was accidentally unplugged. Since then the wireless LED light doesnt come on and the router cannot be detected. All the other lights are on. I tried to reset it but I dont think it worked, since the power LED didnt blink as its supposed to do after holding reset for 10-15 seconds (or more!!).

View 5 Replies View Related

Linksys Wireless Router :: E1000 Only Connects Using Wep

Aug 9, 2011

I've been using the E1000 for months. I have 2 iphones, an ipod, a windows 7 netbook and a macbook connected wirelessly to it. It's been set at wpa2/wpa mixed mode all this time without a problem. Out of the blue: no wireless connection on any device. I restarted the modem, router, PC's, phones, etc. I've updated the firmware. The only way I can get a wireless connection is to use wep. How can I get the better security and speed of wpa2 back?

View 4 Replies View Related

Linksys Wireless Router :: E1000 How To Get Password

Feb 21, 2012

I am trying to access the internet with my ipod and it is picking up my wireless connection but it is asking for a password, how do I get my password.  I don't remember seeing a password when I hooked up my router several months ago. I called Cisco for some technical support but they wanted money to get me and I am not paying them a dime.

View 1 Replies View Related

Linksys Wireless Router :: Way To Setup E1000 With Cd

Jul 3, 2012

I can setup my router with the cd

View 1 Replies View Related

Linksys Wireless Router :: Open Nat On E1000

Jul 26, 2010

I have a PS3, and i play allot of video games such as all COD game especially MW2.  It says i have a strict or moderate NAT.  My router is in the same room as the PS3, so i should have a Open Nat.Also i have another question, i bought this Epson printer from Best Buy, i was wondering if I can connect to it Wireless, but i think i cant connect to it wireless cause i dont see the WiFi Certification on the printer or anything hints that it can connect wireless

View 9 Replies View Related

Linksys Wireless Router :: E1000 Needs To Be Rebooted To Be Seen On LAN

Sep 3, 2011

With the E1000 tthe wireless devices they seem to work just fine, I can access the internet just fine.
 
For my desktop PC in oder to use the router to get on the internet or to even use the Cisco Connect to check the router, the E1000 needs to be rebooted. I am unable to access the router otherwise. I have tried 3 different LAN cards all with the same results. 
 
The latest firmware notes do not look like upgrading the firmware will work. My Router info from Cisco connect
 
Model name: Linksys E1000
Model number: E1000
Serial number: CVN21L422937
Firmware version: 2.1.01 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): unknown

View 1 Replies View Related

Linksys Wireless Router :: E1000 Regularly Goes From 300 Mps To 150 Mps

Jan 24, 2013

Things seem to slow down significantly to the point of loosing connectiviety.  When I check, my mips are 150 or so.  Tried disconnecting and connecting again but didn't work.  When I power down the router and power it up, I get 300 mps again but doesn't last too long

View 2 Replies View Related

Linksys Wireless Router :: Can't Get E1000 To Work?

Dec 30, 2011

A lady gave me E1000 along with an IMB Thinkpad because her husband was the main user on the internet. I have an intel iMac 10.4.11, DSL. I have not yet connected to either device via the router. I am new to wireless routers. I have been to the configuration page

View 2 Replies View Related

Linksys Wireless Router :: E1000 Not Recognized?

Apr 7, 2013

I have a Linksys E1000 router which was working fine. My hard drive crashed; I replaced the hard drive and now my router is not recognized. I have reset it and tried to reinstall it with the CD. Nothing works.

View 1 Replies View Related

Linksys Wireless Router :: Set Up Replacement E1000?

Jun 23, 2011

I had an E1000 for a couple of years that worked OK.  Then it went nuts--sporadically dropped the signal, wouldn't show its web page, etc.--maybe a power surge, who knows?  So I tossed it and got a new one on the theory that it would be a plug in replacement .The new unit had a good signal, but also wouldn't show its web page, so I couldn't configure security.  I removed Network Magic and everything else I could see pertaining to the old unit.  However, the CD for the new unit still gives me: " Your router has already been set up.  You need to use an Easy Setup Key that you can use to get other computers connected."  Needless to say, I don't have such a thing.  Cisco Connect is not installed at this point, so I can't go into it to create one.How can I purge the remains of the old unit so the new one will install properly?

View 6 Replies View Related

Linksys Wireless Router :: How To Configure E1000

Jul 14, 2011

I have E4200 connected to Internet.  It is configured with NAT.  My side of the router is set to 10.10.10.0 and DFG is set to 10.10.10.254.  Server is connected at 10.10.10.1 and is DHCP host.I now have E1000 that I want to connect downstream side of the E4200 (located on the other side of the building).  I want the E1000 to be an extension of the existing network so the whole building looks like one network.  I'm not sure how to configure the E1000.  I assume I need to disable NAT but I'm not sure how to configure the Internet IP addresses of the router and nro am I sure how to configure the local network side of the router.As I write this, I wonder if I connect one of the Ethernet ports of the E1000 to the E4200 and just leave the Internet side unplugged?

View 2 Replies View Related

Linksys Wireless Router :: How To Setup E1000

Jun 10, 2010

I'm trying to set up my E1000 router and when I run the Cisco Connect software that came with the router I get a message that says that it can't find the router, I've tried running it with my computer connected to the router and not connected.  I've looked through the FAQ section and didn't really find anything.  I'm trying to set it up on a laptop, it's a Vaio running Windows 7, I don't if that makes any difference. 

View 7 Replies View Related

Linksys Wireless Router :: E1000 Reset On Its Own?

Nov 12, 2011

I am facing issue with my cisco wireless E1000, the wireless connection on the laptop reset on its own. Its like there is a timer and it reset's the wireless connection after some time. I was unable to measure the time after which it resets but its happening too frequently causing multiple internet apps to fail example if I am downloading something it will fail as the internet connection is reset. The firmware I am running on the rotuer is 2.0.01 and I have configured DHCP on the LAN, I am experiencing this problem with 3 laptop that I use at home which uses both G and N networks.

View 2 Replies View Related

Linksys Wireless Router :: E1000 - How To Open NAT

Feb 16, 2011

I've been searching off and on for the past couple months trying to figure out what we could do to our router to open our NAT, after having both the PS3 and Xbox 360 tell me I've got moderate NAT. I tried a DMZ with my PS3 having a static IP, I tried UPnP. I messed with firewall settings, to no avail.
 
I recently found something that did work however, on Google. Basically what happened was, I needed to reset the router and change a few settings on top of enabling UPnP I didn't know about(CTS Protection, remote management) how they could have anything to do with translation of data. 
 
But like I said, after doing a huge step by step walk through, I was able to get open NAT in the network tests of both PS3 and 360(even though the PS3 obviously still says Type 2. It used to say Type 2, but it also used to have an error code at the bottom of the page). I've checked in games on each console, and they tell me I've got open NAT.
 
Now I still have one tiny problem. Red Dead Redemption. I play Red Dead Redemption online with two friends(who, incidentally, have the same router as me), and we haven't been able to communicate if we were using routers. We still can't, but I'm thinking that it's not my router anymore. I'm thinking his router has incorrect settings. Am I correct? 

View 8 Replies View Related

Linksys E1000 Router - Unable To Connect With Wireless?

Sep 21, 2011

So here is the issue:

When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.

View 1 Replies View Related

Linksys Wireless Router :: E1000 Only Local - No Internet?

Jun 30, 2011

my brand new Linksys E1000 wireless router. I am really struggling and cannot figure out what I am doing wrong.
 
I live in The Netherlands, have a modem (DSL I think...) and can connect wired through the modem with no problems.
 
I installed the E1000 with the CD, followed all the steps and my laptop is finding the network. However, it's only local, no internet and I don't understand why. Have tried to connect (wired) my computer to the E1000 and the E1000 to the modem but that doesn't work either.

View 2 Replies View Related

Linksys Wireless Router :: Mac Cannot Connect Via Wifi Using E1000

Jan 28, 2012

However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now. 

View 5 Replies View Related

Linksys Wireless Router :: E1000 Website Blocking

Jul 29, 2011

is there a way i can block a website from being viewed.i would like to do this from the setup page of my e1000 under website restrictions.

View 1 Replies View Related

Linksys Wireless Router :: E1000 - How To Retrieve Password

Apr 14, 2013

Lost password for router- how do I retrieve password.

View 2 Replies View Related

Linksys Wireless Router :: Guest Password For E1000?

May 31, 2012

where to find my guest user password

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved