Linksys Wireless Router :: Set Up A WRT160N With Sonicwall TZ180?
Sep 14, 2011
I am installing a Sonicwall TZ180 at my home and can't get my Linksys WRT160N to work with it. I lost the antennas to the Sonicwall TZ180, so I am having to use the wireless from the WRT160N. The Sonicwall works just fine and I can get to the internet through it, when I plug my computer into it, but I cannot get the Linksys to connect to the Sonicwall, to use the wireless.
How to configure the Linksys to talk to the Sonicwall? I've googled it without much success.
View 2 Replies
ADVERTISEMENT
Oct 4, 2011
I am trying to bridge a Verizon MiFi4510L to my Sonicwall network router via a Linksys WET610N wireless Internet Bridge. I have successfully gotten the the MiFi4510L to connect to the WET610N and can use the Ethernet connection connected directly to my laptop. I am assigned a DHCP of 192.168.1.6 from the DHCP of the MiFi.I then connected the WET610N connection to the WAN input on the Sonicwall device and connected my laptop to the Sonicwall controlled network. I configured the WAN connection as NAT with DHCP and it connected to the 192.168.1.6 address. However, I can not get to the internet, nor even ping 192.168.1.6 or 192.168.1.1. Something is being blocked (I assume by the Verizon MiFi4510)
View 5 Replies
View Related
May 10, 2012
Here's what I have WAN->SonicWall->E1200 Basically the E1200 is given a static IP for it's WAN that is in the range of the Sonic Wall's DMZ interface, and the DMZ interface is the default gateway of the E1200. When wireless clients connect to the E1200 they get internet access with no issues and they are on a separate network (which is intended). The issue I have is if I get on a computer that is on the Sonic Wall's LAN network, which is able to route to the DMZ network, I am unable to ping the E1200 or perform remote management (turned on in the E1200). There are phone devices that are on the DMZ network that I can ping from the LAN network. I need to be able to remotely manage the E1200?
View 1 Replies
View Related
May 13, 2012
To be clear with the order of things here:
Cloud>Cable_Internet_Modem>Router_Linksys_WRT54g>Firewall_Sonicwall_TZ-170
Cable Internet Modem ethernet port connects to the WRT54g "Internet" port
With WRT54G Settings: Router Mode/Disable DHCP Server
WRT54G Ethernet LAN port connects to TZ-170 WAN prt
With TZ-170 Settings: NAT Enabled/DHCP Enabled
View 1 Replies
View Related
Jul 29, 2011
I have a router WRT160N and I want to connect an AP using a wireless bridge to enhance my WIFI coverage.Which AP is recommended to use without cable together with the WRT160N?
View 7 Replies
View Related
Oct 15, 2012
confirm if the highest speed I can get over WiFi with WRT160N v3 is actually 270 Mbps (and not 300 Mbps as advertised), And there's one more thing - is it normal to have Signal: -51; Noise: -93, SNR: 43, Signal quality 53% if I am only 2 meters far from a router? TX power is set to 28.
View 3 Replies
View Related
May 1, 2010
I have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.
View 6 Replies
View Related
Jan 4, 2012
I have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies
View Related
Jan 12, 2012
turning my wireless back on. Some how in attempting to create a shared file between my pc and my wife's Mac the wireless has been disabled. I have tried resetting the device several times following the instructions on line however I still can not get the wireless to re activate. I tried reverse directions from the posts on how to turn off the wireless but still no luck. I tried restoring the computer to a later date?
View 2 Replies
View Related
Dec 5, 2012
How will I reset WRT 160N?
View 1 Replies
View Related
Aug 3, 2012
I'm having an issue getting my tv to start connecting again to the wireless router.Have tried pin setup (timed out & didn't connect...attempted at least 10 times in this fashion)Have tried entering the password (router seems to refuse the connection to the tv)About a month ago, I was in the Network Magic Map & it looked like one of the laptops had been cloned, so I removed it from the network.
View 3 Replies
View Related
Sep 7, 2011
I have a WRT160N v3 Linksys Router and it keeps disconnecting and then reconnecting. It only disconnects wirelessly. LAN still works fine.I have tried a lot of different methods to solve this issue, but none seem to work.I am very dissappointed in the quality of the product. It has done this every since it was bought. I personally would have sent it in for repairs, but others in my household would not have agreed to that.
[code]...
View 1 Replies
View Related
Jul 15, 2011
Just tried to register my WRT160N V2 and when I tried firstly there is no option for the version 2 model and secondly it says my serial No is incorrect when I have tried it three times and have checked it thoroughly.
View 1 Replies
View Related
Aug 21, 2008
While using Skype I am experiencing poor sound quality, sometimes callers are unable to hear me at all and visa versa. There is a lot of cutting out. My internet connection is fine.
View 5 Replies
View Related
Oct 12, 2011
I have two PC's hardwired to this router that are working okay (although performance has been choppy lately). The past 4 days however, when I try to connect wirelessly I get connections that are repeatedly dropped. I am in the Settings section of my iPad 2 and it keeps rapidly switching between "connected" and "not connected". Firmware is up to date.
View 4 Replies
View Related
Aug 5, 2012
Desktop Xp 3 and connected printer, Comcast cable, WRT160N, wireless laptop w/ Xp 3. Printer is only parallel, and is connected to desktop. How to setup all and print wirelessly from laptop through WRT160N to printer on desktop?
View 2 Replies
View Related
Feb 23, 2012
How do I connect IPAD to Linksys router WRT160n?
View 2 Replies
View Related
Mar 22, 2013
I have a FIOS setup with their Router/modem providing DHCP and Wireless routing. The problem I have is that I have a mix of older equipment and newer equipment. The newer equipment is capable of supporting WPA2, the older is not. I would like the benefits of WPA2, but still would like to at times be able to use the older equipment.My solution was to use a WRT160N v2 router that I had as an access point and it also gives me switch capabilities for wired systems as the FIOS router in on a different floor than the Linksys router. Wired access works just fine and the wireless worked fine until just recently.Since both routers have the same default IP addresses I changed the Linksys to a different static IP and turned off DHCP. I left all of the other defaults the same. I set up the Linksys for WEP and created the key for security. Everything worked fine for the better part of a year, but recently I am having problems where some of the computers cannot find the network or find it then lose connection.
View 9 Replies
View Related
Jul 29, 2011
I am considering to purchase a Linksys Wireless router, but I just don't know which one to select.There are so many different types that seem to have very similar (if not equal) specs.If I just limit myself to the WRT120N, the WRT160N and the E1000, they all have 4 ethernet ports (10/100), and they all support 802.11 b/g/n for the wireless part.Obviously they all promise a blazing performance, and wireless coverage throughout the whole house, without (many) blind spots.But if their specs are the same, why are they different types?
View 2 Replies
View Related
Sep 9, 2011
I have a WRT 160N v2 router. There's 1 computer wired to it, that works fine. Then I have 2 laptops and a pc wireless to it. One laptop is a mac and that seems to be fine, another is a Compaq notebook that has trouble connecting and the pc has the same problem. The signal strength is very good to excellent so thats not the issue. What happens with the pc is, it will connect but at times its only for a few seconds then it disconnects. Sometimes restarting the computer fixes it for a while but it will eventually start having the problem again. It detects the wireless network just fine, and the router's firmware is up to date. I have a feeling that its the settings in the router but im not sure what to change.
View 3 Replies
View Related
May 31, 2008
I have two computers on hard line and two laptops. All computers on the line work fine and flawlessly. But when I try to connect the laptops to the computer, they say there's a problem with the certificate. Both detect the connection, and with strong enough signal strength. I've tried WPA and WEP encryption methods, and disabling encryption methods. All had no change. I believe the problem lies with this Wi-Fi Protected Setup stuff, which I have no clue as to what the hell it's supposed to do. I've tried disabling it by turning it to manual, which all computers then lose internet connection entirely. Browsing the FAQ's, I havn't found a solution. I've been working on this thing for a solid 7 and a half hours straight, and phone support is trying to make me configure static IPs, which proved extremely inconvenient in the past.
View 9 Replies
View Related
Dec 2, 2009
I just bought a Linksys WRT160N router. I pop the installation disk in my mac book pro and walk thru the installation procedure successfully.But I can't connect wirelessly from my MacBook Pro (running mac os x 10.5).It sees the router and I did type in the password correctly (i copy from the text file generated by the installation procedure), but I keep getting 'coonnection timeout'.
View 9 Replies
View Related
Mar 23, 2010
Even when I disable remote access, people still can get to my router login by typing my external IP. Is there anything I can do to stop this?
View 5 Replies
View Related
Aug 8, 2011
My Linksys WRT160N wireless router stopped working all of the sudden. When I connect to the internet wirelessly my laptops say I have full signal but "No Internet Access." None of the 4 wired ports on the back of the WRT160N router give me wired internet. The only way I can get internet is to connect the wire to my internet modem
View 5 Replies
View Related
Oct 18, 2011
I selected: Static IP
Static IP:192.168.0.100
Subnet: 255.255.255.252
Gateway:192.168.0.1
DNS: 60.49.166.105
I am a Malaysian, using Streamyx here, I search some articles shows that the ISP given is 60.49.166.105 or 60.49.166.106. Am I right in the setup? Why I am still unable to online though successful to connect after the setup configuration?
View 1 Replies
View Related
Nov 16, 2011
I need to go two ways in my house to improve the wireless signal. Do I just run ethernet cable from the router to the access points? Do i then setup each AP?
View 1 Replies
View Related
Mar 28, 2012
How do I boost my reception on my WRT160N so I may receive internet in back room of house?
View 2 Replies
View Related
Aug 11, 2011
I have" a WRT160N but I guess we had a power outage while I was on vacation and now I can't connect to my old network I set up.I see the Linksys internet connection and I can connect but its not the password protected one I set up. When I go to "manage connection" I can see the old "house" connection but can't connect
View 4 Replies
View Related
Jan 20, 2012
How do I open ports 443 and 80 on my wrt160n v3 router?
View 1 Replies
View Related
Sep 17, 2012
A few months ago, I purchase, installed and configured a WRT 160N V3. And I couldn't be happier. I now would like to go back and change the passphrase that a user needs to enter when they connecting to my router. Currently it uses the default value. And I would like to make it a bit more friendly. I found a number of postings dealing with setting retrieving or changing the Admin password.
But I was not able to find anything on changing the “passphrase”. There probably are a number of postings on the subject, and I simply overlooked them.
View 5 Replies
View Related
Feb 6, 2012
I just figured out how to bridge my modem, it was working perfectly. I was walked through by my ISP. So I KNOW it's correct.When I go to set up PPPoE with my WRT160N V2 router, I seeUsername:Password:Service Name (optional)(unchecked) Connect on Deman: Max Idle Time(checked) Keep Alive: Redial Period 30 secondsI KNOW my user and pass are correct but i still have no internet when I bridge my router and put in the info.My modem has DHCP turned off so i turned it off on my router too...nothing.Basically what all settings do I need to change in the ROUTER ALONE to make this work when setting up a PPPoEbtw setup is
ISP>Modem>Router>Computer
View 6 Replies
View Related
Jul 28, 2011
I have a Router WRT160N and need to connect an Access Point using a wireless bridge (i.e. cannot use cable between router and AP). Which Linksys Access Point model is recommended to use with this router?(No I dont want to use another WRT160N with DD-WRT!)
View 1 Replies
View Related
Dec 25, 2011
While trying to add my kindle fire (unsuccessfully) I lost all internet connections, now my laptop won't connect. I reset the router and and can see my wi-fi account but when I try to use on my PC and laptop it won't recognize it.
View 3 Replies
View Related
