I can't seem to receive emails although I can send them and my prinet is off line. Had an IT guy come out and got me to the internet but he didn't make sure I was receing emails or able to print.
View 1 RepliesMy ISP provides static ip based internet connection. I have setup my D-link DWR-113 router to access internet through it. I have also turned on DHCP in the router. But when I try to access internet using both of my computers simultaneously it doesn't work - none of the computers is able to load a webpage. And when I leave one computer I am able to surf without any problem.
View 6 Replies View RelatedI just installed the E2500 to replace my older router. With my older router I was able to share files between the different computers in my house. All I did was replace the old router with the new one and now they cant share files? I looked through the router settings and cant find anything showing firewall blocking the file and print sharing. why I cant share the files and how to allow the file sharing?
View 1 Replies View RelatedI have a desktop computer connected by ethernet (VISTA) and a Windows7 laptop by wireless. I am trying to share folders have got the share saying no passwords and yet when I click on a folder it asks for user name and password, no passwords have been set to open either computers.
View 3 Replies View RelatedA desktop running XP, connected via ethernet to a linksys E1200 router that is connected w/ethernet to satelite modem. And a Laptop running Windows 7 that is communicating wireless to the router.Question: Can I share files between the two computers this way, or do I have to get a cradlepoint router?
View 3 Replies View RelatedI was wondering if I plugged an ethernet cable from my laptop (which has wireless internet) into a nearby computer (which does not have internet) if they would share the internet? i did plug in the ethernet cable, and my computer acquires a network address but has limited or no connectivity
View 3 Replies View RelatedI have 2 computers(1 and 2) connected to a router with ethenet cables and printer connected to computer 1. With both computers on, both can use the printer. With computer 1 turned off, computer 2 cannot access the printer. So, what do I need to allow computer 2 to access the computer when computer 1 is off?
View 3 Replies View Relatedi want to share my internet between two or more computers.is it possible with switch?
View 2 Replies View RelatedTSG SysInfo:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 2046 Mb[code]...
I am trying to share my printer with the other 2 computers on my home network. I have the printer connected to my XP machine. The other 2 computers are running XP and Windows 7. The Windows 7 machine is directly connected to the router and my computer and the other XP computer are connected wirelessly.I've shared my printer and given it a share name. But the other 2 computers cannot access my computer for some reason.I'm not sure why they can't access my computer to see the shared printer.
On the laptop, the info bar is on the left side, the website tabs on the top, this shifts the other computers screenview down and to the right, it also cuts off the right side and bottom, with still leaving space on the right side and bottom. The pointer on the lap top does not line up with the desktop, because the screen is shifted, but only a portion of the screen is visible anyway. I used the same password and log in on both computers, don't know if they have to be different.There is full a screen option at the top right, but this causes the top tabs and info buttons on the left side to go black.
View 3 Replies View RelatedI have a desktop computer running windows xp, it is wired to my router. I am trying to network it together with my laptop that is running windows 7 and connects wirelessly.
View 1 Replies View RelatedI was hoping to be able to save a file on one computer and for it to be accessed from a computer in the next room.The first computer is connected to the internet and when emails are received I would like to save them to a folder in my documents and then be able to go onto the other computer, go to my documents and open the file I just saved from computer one.
View 5 Replies View RelatedFirst off, for almost ever my two computers (Laptop/Desktop) linked on the same network/home group have been able to transfer files to each other over without any problem. I must have done something when Norton Expired on my Laptop which is causing the problem now. (Both running windows 7)Both computers show up in the network tabs, as normal. From my desktop I can access my laptop like I always could. I can play movies etc. but I can't make any changes or transfer files. As it says "You need permission to perfrom this action."Now from my Laptop, I can also see my Desktop in the network tabs. but I can not view anything on the computer. When I try to browse through the network tabs, I get [Windows cannot access \network error code 0x8007035].
1. I had it working before so I know they are properly connected.
2. Both computers can see eachother
3. My Desktop can browse my laptops files (but not change anything)
4. My Laptop can NOT browse my desktop as it says the network error code
5. Neither Computer has a firewall on
6. Neither Computer is running antivirus software
7. In the Homegroup sharing tabs, both computers are marked as "allowed" in the media streaming options.
Ive recently gotten four computers together on the same workgroup. They are all Windows 7 in some form or fashion, and I need them to be able to share the C:\Usersusername files so we can grab files from others desktops and work on data spread across multiple computers.
Ive tried using the homegroup function and Ive also tried just about everything and I cannot get them to access each others folders. No matter what I do it says I dont have the access privileges required to open folders on another computer. On a scale of 1 to 10 I would consider myself an 8 or 9 in being technologically savvy, and after an entire day working on it Im just unable to figure this out.
-All computers are on the same workgroup
-All computers can see each other on the network
-All computers have file sharing enabled
-Firewalls are completely off
-All computers run through the same router (though 2 go through a hub then the router, the other 2 go through another hub then router)
When I go to "advanced sharing settings" and try to give permission to a user on another computer the work group doesn't even appear. I can only give access to local users on each individual computer.
I have a home wi-fi network that connects through a router/modem to the Internet. There are three up-to-date Windows Vista (Home edition, I think) laptops on the network all of which connect wirelessly to the router/modem. The network is password protected (for security purposes I turn off network discovery. And I don't use file sharing between the laptops). In other words, I have three laptops connected to a common wireless Internet connection (the router/modem). I also have a desktop computer (that I use for projects and gaming), but I don't have a wireless network adapter nor a long enough ethernet cable to connect to the router. I don't have any technical problems connecting to the Internet using a crossover ethernet cable. It's just impractical as I have to dismantle the whole desktop computer system (printer, monitor, scanner, etc etc) and carry it to a different room within cable distance of the router every time I need to update the software or activate a new application.
View 6 Replies View RelatedI was wondering if it is possible to share my internet connection to specific computers on my home network. Both my laptop and desktop computer is connected to the same Wi-Fi router (no internet connection). This network connection is mainly used for file sharing. I want to share the mobile internet connection on my laptop with my pc without giving the other computers on my network access to the internet connection and without disconnecting from the home Wi-Fi router. Is this possible and if so how
View 2 Replies View RelatedI have a friend with a mac laptop that I need to transfer roughly ~110 GB from. I have a laptop that dual boots Windows 7 and Kubuntu 12.10. Easiest way to directly transfer these files between our computersNeither of us has a large enough external hard drive.
View 1 Replies View Relatedhow can I make a folder that gets updated on a computer does the same thing to another computer on the same network, so while I add new music to my music folder on one computer it updates the files on the other computer? How can I do this?For instance I add a song to the album folder UNKNOWN on a downstairs computer Upstairs computer gets the song updated in the the UNKNOWN Album folder.
View 3 Replies View RelatedHow do you set up a network of 2 computers so that one computer without the actual software on its hard drive can run programs that are on the other computers hard drive?
View 1 Replies View RelatedThey both have laptops and share data via a flash drive and emails between the two laptops.This is the scenario, They both input data into one excel spreadsheet on laptop 1. Laptop 2 works on data, puts it onto a flash drive then goes to laptop 1 and opens the spreadsheet and enters data from flash drive.My thought is wouldn't it be great if they could use some type of VPN? They could both work from home and access each others computer files, spreadsheet and databases.
View 2 Replies View RelatedWhen I was using my Linksys router, I had no difficulties setting up Windows File Sharing on my computers but since I upgraded to the DIR-655, file sharing have hardly worked. Sometimes I could get one of the computers access files on another, but not the other away around. Most of the time, none of the computers have access to the files on any of the other computers. Two of the computers run Windows XP and another one runs Windows Vista. All computers are on the same workgroup and able to connect to the internet through the router. When calling D-Link tech support, I am told that they dont support file sharing and that I had to contact each computer's manufacture's tech support on the instructions on setting up the file sharing (each computer is from a different manufacture). One of the tech supports did drop the slight hint that I needed to recreate the home network, but when I tried to do that, all I could find is the settings to connect to the router (which I had set up when I installed the new router) and to enable file sharing (which is already done) and to assign the workgroup, which they were all are already assigned to the same group.
View 8 Replies View RelatedI've just installed a RV042G router for the first time. The computers connect to the internet just fine, but they can no longer see each other through the Windows workgroup. I can ping the router, but not other computers on the net. The router doesn't seem to be sharing the names of the other computers on the net.
View 1 Replies View RelatedI have 2 computers in my room which between them i very frequently share files between. Wirelessly they were both connected to my home's router until recently the router was removed, but will be back soon.The problem though, was that with using the router, file sharing between those computers was slow, and with the router gone, I was lost because there was no movement of data between the computers whatsoever, I had no crossover cable, but plenty of regular ethernet cable. Than I remembered something about gigabit lan not needing crossovers(both of the computers being gigabit) and I connected them, and marveled at the new way to share files. And more by the exponential boost in speed(800kb/s to a grand 12mb/s{though I still think that is slow for gigabit.}). Obviously I've overcome a problem, but that's not where this story ends, it comes with another problem. When the router is reconnected to these computers, will the files still transfer through there new found direct connection? or will it attempt to go through the router, only allowing me to get the speeds I want when one of these computers isn't connected to the router?
View 11 Replies View Relatedconfiguring NAT on intranet firewall. here is the my topology:
DMZ Network - - - - - - - - - External Firewall - - - - - - - - - Internet
|
|
|
Internal Network - - - - - - - - - Internal Firewall
1) I can Ping the intneral host from external firewall, internet firewall and DMZ network
2) Both ASA's are running OS Version 9.0(1)
3) ACL used permit IP any any, on both (i.e inside and outside)
NAT configuration on Internal Firewall (Identity NAT)
object network MGMT-SRV-INSIDE subnet 10.10.10.0 255.255.255.192
object network MGMT-SRV-identity
subnet10.10.10.0 255.255.255.192
object network MGMT-SRV-INSIDE nat (Inside,Outside) static MGMT-SRV-identity
[code]....
I am configuring a Cisco ASA 5505 firewall.In the office there is 1 x SBS 2008 server and 5 x PCs, all sat behind a Netgear DGN1000 ADSL router.We want to implement a ASA 5505 for added security.I have configured the internal interface of the Cisco ASA 5505 to be 192.168.0.1 - this is connected to local switch. The client PCs use 192.168.0.1 as their default gateway.I have configured the external ASA 5505 interface to be x.x.x.217. [code]Change the current router status from Router/Firewall/Modem to Modem only (Bridge mode). The ASA 5505 has its outside interface connected into one of the LAN ports of the netgear. The lan port has an IP of 192.168.0.254.
View 3 Replies View RelatedWe have a requirement where we need to enable a dynamic NAT from DMZ-1 to Inside, I gave the command below, but for some reason it does not work.nat (DMZ-2,Inside) source dynamic any interface,NOTE: The access-list is permitting all the traffic from DMZ-1 and Inside (for test)
View 1 Replies View RelatedI'm having an issue configuring NAT on an ASA running 8.3. 've managed to configure NAT from the Inside interface to the DMZ, using PAT, so that the traffic is hidden behind the IP of the DMZ interface. This seems to work ok.
object network obj_any-18
subnet 0.0.0.0 0.0.0.0
object network obj_any-18
nat (inside,dmz1.005) dynamic interface
The problem I have is when I try to configure a rule for traffic that originates in the DMZ back to the Inside. I can't seem to get any traffic to flow from the DMZ to the Inside, and sometimes I manage to stop traffic flowing in both directions!
What would be the best way to configure the return traffic from the DMZ to the Inside.
I am trying to connect 2 VMWARE servers directly to my 5515-X firewall. [code]ASDM will not let me assign the same VLAN to both Gi0/2 and Gi0/3. I dont want to connect my VMWARE servers to a switch first (that just adds one more component that can fail).
View 4 Replies View RelatedI am configuring new ASA 5520 with AIP module for our network with HA (2 boxes), would be the best practice to configure in order to protect web servers and email server.
View 2 Replies View RelatedThere seems to be a large number of the subject queries in one form or another. Having acquired an asa 5505 and using 8.43 firmware and the ADSM gui for router configuration it has not been an easy transition from other products. I have come to understand embedded NAT objects for basic port forwarding but am at a loss on configuring twice nat or manual nat, not really ever dealing with it before, or in this manner.
What I would like to suggest to the experts, is to include far more ADSM web gui examples and discussion for manual nat. The tools are all there - in the nat rules editing page, the display of the rules pictorially and the packet flow at the bottom of the page (and finally thru packet tracing). What is needed is more on the actual entries on the nat editing pages and the logic and explanation of those entries. In this forum what I would like to see is when there are responses that they include both the CLI recommended entries b AND the associated adsm web gui pics. With good documents for reading and examples in the forum, I think there should be much less confusion allowing more attention to some very complex scenarios. At the very least I and others like me will get better edumecated. I am looking to understand CIsco packet routing through explanations of the web gui entries. In fact, I am learning far more by trying to understand the web gui vice simply copying and entering CLI commands. In terms of documents, for example, there should be a very thorough explanation of the relationship between "Translated Addr:" in the first NAT editing page with "Destination Inteface" in the second Advanced page .I have added the packet tracing jpegs for further context. There is an UNNAT lookup entry (first trace block, out of view on the pic) a concept which is missing in the documentation I've read that needs to be added but it is illuminating in how the router handles traffic. What is also interesting is the fourth jpeg which also shows the flow designation of a packet and its handling internally (new packet or one that is associated with an existing packet (previously identified and put in an appropriate table xlate etc)).
I present wish to develop a policy and template for QOS on our ASA 5520 release 8.0(2) we presently have wish to do server hosting in our network for other organization,which the they will be able to access their servers they have both public and private addresses. we do have our one servers also already in production all behind the ASA And therefore we wish to apply qos on the servers to be hosted and we wish to do this on the ASA. how to go about this to apply qos on the ASA?
View 3 Replies View Relatedwant to know the command for configuring NAT on My ASA5505.
Local IP - 192.168.1.0/241
Public IP - 182.73.109.118 255.255.255.252
We have to set up voip for our network(for 50 phones not he cisco phones).
I need to just the route the voip traffic to gateway address of telephonic company(1.1.5.7) where they provide us the connectivity for the setination call.
What sort of protocols should i have to enable in pix i saw the concepts like sip, h323, ras, skinny.
We are using only voip for asa and no data or other traffic should be allowed.
inside adrees: 10.10.10.0/24 for all voip phones
outside:121.21.22.1
telephoneic gateway: 1.1.5.7