To Learn Authorization In CLI
Jan 22, 2013Any good and simple resource to learn Authorization in CLI. I read small docs but, I did not grasp it at all.
View 1 Replies
ADVERTISEMENT
How To Learn All Active IP's On Router
Oct 16, 2011I wonder if there is a dos command in XP that can display all current active IPs that are on the local network's router. So that i don't need to login to router's interface and still learn all current active IPs on the local network.
View 5 Replies View RelatedBest Way To Learn About Networking / Servers
Aug 17, 2012I'm someone who has a long background of computers but it's generally just giving general advice, building them, overclocking them and troubleshooting standard 'Home PC' type issues mostly with hardware but some software as well. I really want to start to expand my knowledge somewhere else within computer hardware and software to improve my job prospects in this area. I'm trying to move towards more of a Network/Server admin/support type career and I'm just wondering where the best place to start learning about something like this might be? I don't even know where to begin.
View 2 Replies View RelatedCisco :: How To Learn Networking For Real World
Oct 2, 2012i got CCNA but i feel that it doesn't teach me how to build networks for business and how to chose an network architecture. What is the best way to learn this? Also, what is the best way to learn how to build a wireless network for a company that runs on multiple floors without user losing wifi connectivity when they roam
View 19 Replies View RelatedCisco :: Quick Learn On NetFlow 2900
Mar 3, 2013I have a hub / spoke configuration, with about 9 spokes. All connect ot the main office over a VPN, all native Cisco routers (2900 series)I want to use netflow to monitor traffic, and I started, but my results are not what I expected. I don't think I configured it properly.
Several interfaces have sub-interfaces, so if I'm reading correctly, I only export flow from the physical intyerface, not the sub-interfaces. Correct?I want both inbound and outbound traffic, so do I use the command twice with ingress and egress?What is the difference between V5 and V9?
Finally, how does NBAR fit in this? I want to see applications as well as just packets.
Cisco :: AIR-CAP3502I Cannot Learn Option 43 From MS Server
Feb 12, 2013ragarding AP AIR-CAP3502I cannot learn option 43 from MS server but it can learn the DHCP ip address. We have 2 sites that option 43 does not learned by new AP's but other site works ok. I tried also to delete and add the dhcp scope and same issue. My temporary solution will be creating the DHCP pool with option 43 and 60 in the access switch and it work ok, new AP's able to show in the WLC. I just need more information why site AP's cannot learn the option 43 of the MS server but other site AP's work ok. Is this IOS bug? AP's issue? MS issue?
View 6 Replies View RelatedCisco Switches :: 200 Learn Voice VLAN And CoS / DSCP From Catalyst 2960?
Oct 31, 2012How can I configure Cisco 200 (SG200-08P) to learn Voice VLAN and CoS/DSCP from upstreamCatalyst 2960?
The Cat 2960 is today used together with LLDP-MED to announce config to Aastra IP Telephones. In some cases I need to use a small switch inbetween and plan to use the Cisco SG200-08P for this. However, I would like to avoid manual config of the Cisco 200 switch.
Cisco :: 4948 - 122-46.SG On AAA Authorization
Jul 21, 2012I have faced a problem regarding AAA line:
aaa authorization exec default group tacacs+ local
if i add this line in my cisco 4948 switch running on 122-46.SG.. The next time i telnet to the switch i get an automatic restart of the switch and all configs are lost.
IOS used:
cat4500-ipbase-mz.122-46.SG.bin
WS-C4948-10GE
Cisco :: LMS 3.0 - Authorization Failure Log
Jul 16, 2011In our company we are using Ciscoworks LMS3.0.( DFM 3.0.1, RME 4.1.1.) In DFM, every day at 8:00 PM we receive alarm authorization failure on Core switch ( source is cisco works server IP).
View 6 Replies View RelatedCisco AAA/Identity/Nac :: VPN Group Authorization With ACS 5.2
Apr 26, 2011I'm trying to set a VPN connection to a router using group authorization with the ACS 5.2 but cannot make it work. I configured everything based on the procedure used for ACS 4.2. I created a user that corresponds to the group name, used the password cisco and used all the requiered Cisco AV pairs in an authorization profile. (Based on document: [URL]
While testing with ACS 4.2 this works fine, I can see that the ACS returns the group attibutes correctly (here is a debug output)
Apr 9 16:16:59.256: RADIUS: Received from id 1645/22 192.168.1.212:1645, Access-Accept, len 203Apr 9 16:16:59.256: RADIUS: authenticator 02 07 F5 E6 46 78 73 CA - 46 6D 47 90 FE 92 38 9AApr 9 16:16:59.256: RADIUS: Vendor, Cisco [26] 30 Apr 9
[Code].....
Cisco :: LMS 4.1 Authorization Error With DB Users
Sep 12, 2011We need SQL-Connect to DB-Tables, as some "self-written" perl-scripts try to collect data.Are there any steps necessary to enable access to DB-Tables (and Views) ?
View 1 Replies View RelatedCisco VPN :: Remote Access Authorization Using ACS 5.3 And 8.2?
Aug 19, 2012We plan to use ACS 5.3 for remote vpn user authorization. We have found a document on to how to do this, but they use ASA 8.3.we would like to know if it is supported on ASA 8.2 or do we need to upgrade the ASA IOS.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 CLI Commands Authorization
May 9, 2011Have a conceptual question bout CLI command authorization. We have ASC 5.2 up and running, providing AAA services for network devices. Now I need to make profiles for users in certain group to restrict dem CLI "rights" to show, clear counters and show running-config commands. I need to accomplish dis task.I should clrete separate privillege levele profile (let it be 2), specify commands at this level, assign Group this Authorization Prifile and make some additional changes in my devices.
View 26 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 And Authorization Profile For RAS
Aug 2, 2012what's the ACS 5.3 common configuration for authorization profile for RAS authorization ?
I have an authorization error and the customer needs PPP, LCP, ip pool (configured on the ras).
Cisco Security :: Command Set Authorization In ACS 5.0
Jan 6, 2011Attached is what i have done for command authorization for privilege level user 2
View 27 Replies View RelatedCisco AAA/Identity/Nac :: Authorization Between ACS 5.2 And AD 2003
Feb 27, 2011I am in the process of setting up an ACS evaluation that will authenticate against a Windows 2003 AD. I am currently testing this with AAA TACACS+ but will evenutally setup 802.1x authentication. My problem however seems to be between the ACS and AD.
I have the AD External Identity store configured and successfully tested for connectivity. I created a shell profile and a command set and also created an access ploicy for Device Admin. I added the AAA commands to my test switch and do get prompted for username and password. This is where my issue starts. Regardless of what username and passwword I enter, I always fail authentication. At least that is what is in the reports and I have 0 hits on my Access and Authorization policy rule. I am using as basic as a config as I can get with simply using a contains from one of the groups I am in for the policy rule. I had a non-AD admin account to start with thinking maybe a rights issue with the AD account but have moved to an AD admin account with no change in the results. I saw a post somewhere that the time stamps on the AD server and the ACS had to almost be perfect and recommended that NTP for ACS be the AD server as that could cause issues and I have done that as well with no change. I am wondering if there is something specific I needed to configure or something I missed between the ACS and the AD? Is there a way I can display what is passed back and forth between the ACS, or the switch, and AD to verify content? I put a call into my local SE and he is as puzzled as I am.
Cisco AAA/Identity/Nac :: PIX / ACS AAA Authorization On 5505
Jul 24, 2012i have create a one profile on PIX/ASA Command Authorization Sets & MAP with Group & Ldap with My AD. but authentication is not done as per the set parameter on command authorization in ACS.i am using Cisco ASA 5505 & ACS 4.2.
View 1 Replies View RelatedWireless :: Entering MAC Address Authorization For Second User?
Jul 13, 2012I would like to authorize a friend in my house to access my wifi I was told to go to http://192.1.1 and enter the MAC address of my friend. However on the site I was unable to enter the information into the box - how can I authorize my friend to use my wifi?
View 1 Replies View RelatedAAA/Identity/Nac :: Configuring Authorization ASA 5520 - Level 15
Sep 10, 2012I have an ASA 5520 8.2(5) with ACS 5.1, I made the configutation of Authentication and is working well, now how I can configure the authorization and get into the privileged level 15 mode directly.
View 6 Replies View RelatedAAA/Identity/Nac :: Csg2 Radius Authorization Failure
Nov 22, 2012I have defined Radius proxy on csg2 to external radius server, but pdp fails with Authorization failure message on GGSN and on Csg2 debut log I see “SAMI 3/3: Nov 23 15:11:43.937: RADIUS: Dropping the unsolicited RADIUS packet”
View 0 Replies View RelatedCisco AAA/Identity/Nac :: NCS TACACS+ With ACS 4.2 - Authentication / Authorization?
Sep 13, 2011I tried to configure TACACS+ authentication / authorization for NCS via ACS 4.2. For that I followed the configuration guide:
1. Configured the service for NCS with HTTP (see attachment)
2. Added the tasks to the user (see attachment)
When I try to login on the NCS it fails, in the logs on the NCS I see the following lines:
09/14/11 16:53:03.333 TRACE [system] [http-443-7] [TACACS+ AAAModule] Creating authorization socket - To Server: 192.168.49.14 - For User: netadmin
09/14/11 16:53:03.335 TRACE [system] [http-443-7] [TACACS+ AAAModule] Sending authorization request packet - To Server: 192.168.49.14 - For User: netadmin
09/14/11 16:53:03.336 TRACE [system] [http-443-7] [TACACS+ AAAModule] Receiving authorization response packet - From Server: 192.168.49.14 - For User: netadmin
[code].....
Cisco AAA/Identity/Nac :: Cat 3560G With IOS 12.2SE Fails Authorization To MS IAS
Jun 8, 2011I have IAS set up on my organization's AD domain controller. Multiple policies set up for various authorization scenarios, authenticating based on Windows user groups and client IP, authorizing by passing "shell:priv-lvl=#" where #=desired privilege level. On my IOS devices I have:[code]
This identical configuration operates correctly on a Cisco 3825 and a Catalyst 4506. On the 24 port Cat 3560G PoE running 12.2SE (do not recall exact IOS version, but I know it is in that release train) that I am currently working on, every attempt to login via ssh passes authentication but fails authorization, displaying %Authorization Failed on the terminal and a message stating that "No appropriate privilege level found for user" in the debug statement from RADIUS.I have verified correct server addresses, correct source-interfaces, and that configs between the three devices match exactly with regards to aaa.
Cisco :: ACS 5.0 - Use For Authorization And Accounting Of Netscreen Devices?
Jan 1, 2012I am working on cisco ACS 5.0, authentication is working fine on netscreen. Can acs be used for authorization and accounting of netscreen devices. if yes, what will be the configurations.
View 1 Replies View RelatedCisco VPN :: ASA5520 Not Get A Valid Product Authorization Key To Use
May 8, 2012we have a Cisco 5540 with ASA5500-SSL-100. We have been trying to load the ASA 5500 SSL VPN Premium user License on the appliance but we could not get a valid Product Authorization Key to use.
View 1 Replies View RelatedCisco VPN :: IPSEC VPN Group Authorization ASA 5520
Feb 15, 2011Options a user may reside in Austin, TX and I want the user to utilize the local proxy (i.e. texasproxy:8080). We currently only require the user to enter the RSA passcode and username to authentication (RSA/AD username are identical). Is there a way to have the user authenticate via RSA and have the user's AD group membership (TX) assign the user the specific IE proxy settings? We are utilizing an ASA 5520 on 8.2, but we are willing to upgrade to newer IOS or even consider anyconnect to resolve this issue.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 Authorization With Juniper WXC-3400
May 5, 2013In the process of migrating from ACS 4.1 to ACS 5.3. Authentication works fine, but having issues with authorization on the Juniper WXC-3400 devices. In ACS 4.1 we were passing TACACS+Shell (exec) Custom attributes Privilege level=15, which allowed a user to login with read/write privileges. In ACS 5.3 tried setting the Shell Profiles common task to 15 for both Default and Maximum (one at a time, and together), as well as setting the Custom Attributes for priv-lvl=15 (with and without Common Tasks set).
A capture shows Auth Status: 0x11 (ERROR).
Cisco VPN :: ASA 8.2 Anyconnect User Authentication And Authorization
Jan 17, 2012I would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, then the RADIUS server validates this information and sends the user attributes to ASA upon successful authentication.I would be grateful if i can get the step by step procedure to achieve this:The below is what iam trying to do:
1) Create an AAA server group.
2) Add the AAA server to this group (here its RADIUS).
3) create an LDAP-cisco ASA group mapping (for authorization)
3) Add a group policy and create IP pool. (We can add two types of group policies, one is internal and external. Not sure which one to select here).
4) create a any connect vpn client connection profile. Here we specify the created server group name, IP pool and group policy.(While creating a connection profile, it asks us to select an interface. As of now i have only one interface which is "inside". Not sure what the interface "outside" means).
Cisco AAA/Identity/Nac :: ISDN Authorization With RADIUS Using ISE 1.1.2?
Nov 19, 2012I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius.
Problem is that isdn client gets authenticated and authorized but calls get dropped and they dont able to communicate with HO. IP address is assigned by Head End router to all remote isdn dialing branches..
I have used default "PermitAccess" in authorization policy and authentication policy is also default. I dont understand where I am going wrong as authentication and authorization is sucessful.
aaa authentication ppp default group radius local
aaa authentication network default group radius
aaa accounting network default start-stop group radius
radius-server host 12.18.22.41
radius-server key *****
Cisco AAA/Identity/Nac :: ACS 5.2 - TACACS And JunOS Authorization?
Mar 4, 2012I can get it to authenticate. But I've read some posts on ACS 4.2 and authorization, but I don't find anything similar.I want to control down to what commands the authenticated user can run. I want the defintion to come from the ACS server, or at least control it from the ACS server. I want to minimize the changes on the JunOS side,but if it can't be easily done, I'll change the JunOS side.
View 10 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 / Tacacs Authorization Restrictions
Nov 14, 2012ACS 5.3 configured with two rules, 1 rule for standard level 15 access for the Network Engineers and a 2nd rule to allow some limited access to switches: The limited access account has enough command set access to change the vlan on a switchport, so Configure Terminal, Interface FAx/x and switchport access vlan x.
Switch configuration:
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 0 default group tacacs+ local
aaa authorization commands 1 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa session-id common
Everything works well and the limited access users can only perform the commands i've setup.
Problem:The problem i've encountered is when one of the network engineers makes a change that would stop the device from being able to see the ACS server it stops allowing any commands to be typed in the router/switch. Additionally if you then connect to the device and login with the local username and password the device then waits for it to hit the TACACS server timeout for every command you enter. This is obviously very slow and painful for the engineer.
Question:Is there a way to set this up so the engineer logging in with full Level 15 access doesn't have to have each command authorized by the ACS server but still allow the limited access accounts to be able to make interface changes?
Cisco AAA/Identity/Nac :: Authentication With One ACS 4.2 Server While Authorization With Another
Apr 5, 20111 ) : Is it possible to do authentication with one ACS server while authorization with another ACS? Use case is if the user authenticated to one ACS server and then switch loses the connectivity to this ACS. Now command authorization requests will go to another ACS server since switch is not able to communicate to the 1st ACS.
2): How can the local database sync be acheived in distributed ACS deployments?
3): Are the accounting records are sync between different ACS? In other words can accounting be centeralised with ACS4.2
AAA/Identity/Nac :: 2960 - ACS 4.2 NDG And Shell Authorization Sets
Nov 25, 2011I am trying to solve this problem without success so far. I have fresh ACS 4.2.15 patch 5 ACS installation and I am tryng to deploy it to our environment. So I have configured one 2960S to be my test client and everything works fine. Problem is when I try to create fine grained policies using network device groups and shell authorization sets.
I have created shell authorization sets called ReadOnly and FullAccess. I have also created NDG called FloorSwitches and added my 2960. I have 2 user groups called FloorSwitchesReadOnly and FloorSwithcesFullAccess. Now, if I configure group FloorSwitchesFullAccess and assign Shell command authorization set per NDG and then log into the switch, all of my commands are refused as unauthorized.
One thing that I have noticed is that if I assign shell command authorization set to any device ( in user group settings ) it works fine. Or if I create association with DEFAULT NDG in user group it also works. So my conclusion is that ACS for some reason does not associate my switch with correct group but rather puts it to DEFAULT group for some reason.
AAA/Identity/Nac :: Command Authorization Failed In TACACS With ACS 4.2
Feb 2, 2012We have a group in TACACS ACS4.2. I configure it can do show command. When logged, it can do show command some parameters, like show ip interface, but it cannot do show running-config. it says "command authorization failed".
View 2 Replies View Related