we have a Cisco 5540 with ASA5500-SSL-100. We have been trying to load the ASA 5500 SSL VPN Premium user License on the appliance but we could not get a valid Product Authorization Key to use.
View 1 RepliesI see the WS-SVC-AGM-1-K9 was EOL Jan 2010 ,What is the suggested Product Migration Option? Also if any is using this WS-SVC-AGM-1-K9 I would like some feedback ,Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?
Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy.
Our firewall expert has gone off on long term illness leave and I am trying to pick up the pieces :-(
We have an ASA 5520 (local office) talking to another ASA (remote office) via a VPN Tunnel.
My 1st problem is that I cannot ping from my inside network (local) to the outside interface of my remote ASA.
My 2nd is that I have debug enabled on my rules but am not logging anything.
I just bought 2 Cisco3750 X Switches, After I open the box, there are too many numbers lables on the switch.
1. Which number is for product registration ?
2. Can any give me the link for product registration ?
BTW, can explain to me what is PAK, is it come with the switch ? Where I can find it ? I can find serial number but I don't know how to use it and connect with PAK.
I see the WS-SVC-AGM-1-K9 was EOL Jan 2010,What is the suggested Product Migration Option? Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?,Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy. If the Anomaly Detector can alert us to this type of traffic, it will be much easier to stop them quickly.
View 1 Replies View RelatedI am pretty new to cisco and the learning community forums is truely one of a kind.Actually, I work on a company which deals the Cisco products, Routers/Firewalls/Switches and stuffs. I am sure you get the picture. What confuses me is the product licensing of ASA5500. To be more specific, we are proposing certain things. And that came with the product pricing sets and all. But I amn't having a clear picture on ASA 5500 Strong Encryption License (3DES/AES). Does that come inbuilt(free) or should there be any pricing behind that!?
View 5 Replies View RelatedI am looking at replacing an aging pair of 1410 bridges that are linking a three mile span, one building on top of a hill, the other down in the valley. I see the product is now EOL and EOS, so now what?
Looks like we're being pushed in the direction of this product: AIR-XLTC50DA31AK9
What's a good product to use to backup device configurations?
View 19 Replies View Relatedmy roommate threw out the key code from my n series router, two pcs are currently connected to this network, I would like to add my iphone but need to find the key code on one of these computers..
View 2 Replies View RelatedDue to a cost savings campaign we are trying to use open source as much as possible. Does the ASA 5520 support a product called 'untangle' ?
View 2 Replies View RelatedA few days ago I had to reinstall my notebook and therefore I lost my network settings. I want to reconfigure my Linksys Wap55AG to let it use a new WEP key but I cant find the software to do so ANYWERE on the net.
View 5 Replies View Relatedhow can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
Anybody know of a extension cable for this product? D-Link 14dBi Outdoor Direct Antenna (ANT24-1400) I need at least 10-15 feet of extra length.
View 1 Replies View RelatedI was looking for drivers to support the WMP600N. They are no longer hosted at url...
View 3 Replies View RelatedI want to PAT my project of WLAN and i attached the document, how I create the Testing Criteria of the said scenarios, PAT document includes WCS 7.0, WLC 5508, MSE 3310, Cisco AP 3502e and ACS 4.2.
View 0 Replies View RelatedI have faced a problem regarding AAA line:
aaa authorization exec default group tacacs+ local
if i add this line in my cisco 4948 switch running on 122-46.SG.. The next time i telnet to the switch i get an automatic restart of the switch and all configs are lost.
IOS used:
cat4500-ipbase-mz.122-46.SG.bin
WS-C4948-10GE
In our company we are using Ciscoworks LMS3.0.( DFM 3.0.1, RME 4.1.1.) In DFM, every day at 8:00 PM we receive alarm authorization failure on Core switch ( source is cisco works server IP).
View 6 Replies View RelatedAny good and simple resource to learn Authorization in CLI. I read small docs but, I did not grasp it at all.
View 1 Replies View RelatedI'm trying to set a VPN connection to a router using group authorization with the ACS 5.2 but cannot make it work. I configured everything based on the procedure used for ACS 4.2. I created a user that corresponds to the group name, used the password cisco and used all the requiered Cisco AV pairs in an authorization profile. (Based on document: [URL]
While testing with ACS 4.2 this works fine, I can see that the ACS returns the group attibutes correctly (here is a debug output)
Apr 9 16:16:59.256: RADIUS: Received from id 1645/22 192.168.1.212:1645, Access-Accept, len 203Apr 9 16:16:59.256: RADIUS: authenticator 02 07 F5 E6 46 78 73 CA - 46 6D 47 90 FE 92 38 9AApr 9 16:16:59.256: RADIUS: Vendor, Cisco [26] 30 Apr 9
[Code].....
We need SQL-Connect to DB-Tables, as some "self-written" perl-scripts try to collect data.Are there any steps necessary to enable access to DB-Tables (and Views) ?
View 1 Replies View RelatedWe plan to use ACS 5.3 for remote vpn user authorization. We have found a document on to how to do this, but they use ASA 8.3.we would like to know if it is supported on ASA 8.2 or do we need to upgrade the ASA IOS.
View 2 Replies View RelatedHave a conceptual question bout CLI command authorization. We have ASC 5.2 up and running, providing AAA services for network devices. Now I need to make profiles for users in certain group to restrict dem CLI "rights" to show, clear counters and show running-config commands. I need to accomplish dis task.I should clrete separate privillege levele profile (let it be 2), specify commands at this level, assign Group this Authorization Prifile and make some additional changes in my devices.
View 26 Replies View Relatedwhat's the ACS 5.3 common configuration for authorization profile for RAS authorization ?
I have an authorization error and the customer needs PPP, LCP, ip pool (configured on the ras).
Attached is what i have done for command authorization for privilege level user 2
View 27 Replies View RelatedI am in the process of setting up an ACS evaluation that will authenticate against a Windows 2003 AD. I am currently testing this with AAA TACACS+ but will evenutally setup 802.1x authentication. My problem however seems to be between the ACS and AD.
I have the AD External Identity store configured and successfully tested for connectivity. I created a shell profile and a command set and also created an access ploicy for Device Admin. I added the AAA commands to my test switch and do get prompted for username and password. This is where my issue starts. Regardless of what username and passwword I enter, I always fail authentication. At least that is what is in the reports and I have 0 hits on my Access and Authorization policy rule. I am using as basic as a config as I can get with simply using a contains from one of the groups I am in for the policy rule. I had a non-AD admin account to start with thinking maybe a rights issue with the AD account but have moved to an AD admin account with no change in the results. I saw a post somewhere that the time stamps on the AD server and the ACS had to almost be perfect and recommended that NTP for ACS be the AD server as that could cause issues and I have done that as well with no change. I am wondering if there is something specific I needed to configure or something I missed between the ACS and the AD? Is there a way I can display what is passed back and forth between the ACS, or the switch, and AD to verify content? I put a call into my local SE and he is as puzzled as I am.
i have create a one profile on PIX/ASA Command Authorization Sets & MAP with Group & Ldap with My AD. but authentication is not done as per the set parameter on command authorization in ACS.i am using Cisco ASA 5505 & ACS 4.2.
View 1 Replies View RelatedI tried to configure TACACS+ authentication / authorization for NCS via ACS 4.2. For that I followed the configuration guide:
1. Configured the service for NCS with HTTP (see attachment)
2. Added the tasks to the user (see attachment)
When I try to login on the NCS it fails, in the logs on the NCS I see the following lines:
09/14/11 16:53:03.333 TRACE [system] [http-443-7] [TACACS+ AAAModule] Creating authorization socket - To Server: 192.168.49.14 - For User: netadmin
09/14/11 16:53:03.335 TRACE [system] [http-443-7] [TACACS+ AAAModule] Sending authorization request packet - To Server: 192.168.49.14 - For User: netadmin
09/14/11 16:53:03.336 TRACE [system] [http-443-7] [TACACS+ AAAModule] Receiving authorization response packet - From Server: 192.168.49.14 - For User: netadmin
[code].....
I have IAS set up on my organization's AD domain controller. Multiple policies set up for various authorization scenarios, authenticating based on Windows user groups and client IP, authorizing by passing "shell:priv-lvl=#" where #=desired privilege level. On my IOS devices I have:[code]
This identical configuration operates correctly on a Cisco 3825 and a Catalyst 4506. On the 24 port Cat 3560G PoE running 12.2SE (do not recall exact IOS version, but I know it is in that release train) that I am currently working on, every attempt to login via ssh passes authentication but fails authorization, displaying %Authorization Failed on the terminal and a message stating that "No appropriate privilege level found for user" in the debug statement from RADIUS.I have verified correct server addresses, correct source-interfaces, and that configs between the three devices match exactly with regards to aaa.
I am working on cisco ACS 5.0, authentication is working fine on netscreen. Can acs be used for authorization and accounting of netscreen devices. if yes, what will be the configurations.
View 1 Replies View RelatedOptions a user may reside in Austin, TX and I want the user to utilize the local proxy (i.e. texasproxy:8080). We currently only require the user to enter the RSA passcode and username to authentication (RSA/AD username are identical). Is there a way to have the user authenticate via RSA and have the user's AD group membership (TX) assign the user the specific IE proxy settings? We are utilizing an ASA 5520 on 8.2, but we are willing to upgrade to newer IOS or even consider anyconnect to resolve this issue.
View 2 Replies View RelatedIn the process of migrating from ACS 4.1 to ACS 5.3. Authentication works fine, but having issues with authorization on the Juniper WXC-3400 devices. In ACS 4.1 we were passing TACACS+Shell (exec) Custom attributes Privilege level=15, which allowed a user to login with read/write privileges. In ACS 5.3 tried setting the Shell Profiles common task to 15 for both Default and Maximum (one at a time, and together), as well as setting the Custom Attributes for priv-lvl=15 (with and without Common Tasks set).
A capture shows Auth Status: 0x11 (ERROR).
I would like to configure RADIUS authentication and authorization in ASA 8.2 (ADSM 6.2) by configuring Cisco anyconnect VPN client connection profile.So the end result would be user enters his username, password and a token in any connect client, then the RADIUS server validates this information and sends the user attributes to ASA upon successful authentication.I would be grateful if i can get the step by step procedure to achieve this:The below is what iam trying to do:
1) Create an AAA server group.
2) Add the AAA server to this group (here its RADIUS).
3) create an LDAP-cisco ASA group mapping (for authorization)
3) Add a group policy and create IP pool. (We can add two types of group policies, one is internal and external. Not sure which one to select here).
4) create a any connect vpn client connection profile. Here we specify the created server group name, IP pool and group policy.(While creating a connection profile, it asks us to select an interface. As of now i have only one interface which is "inside". Not sure what the interface "outside" means).
I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius.
Problem is that isdn client gets authenticated and authorized but calls get dropped and they dont able to communicate with HO. IP address is assigned by Head End router to all remote isdn dialing branches..
I have used default "PermitAccess" in authorization policy and authentication policy is also default. I dont understand where I am going wrong as authentication and authorization is sucessful.
aaa authentication ppp default group radius local
aaa authentication network default group radius
aaa accounting network default start-stop group radius
radius-server host 12.18.22.41
radius-server key *****