Cisco WAN :: WS-SVC-AGM-1-K9 What Is Product Migration Option
May 8, 2011
I see the WS-SVC-AGM-1-K9 was EOL Jan 2010 ,What is the suggested Product Migration Option? Also if any is using this WS-SVC-AGM-1-K9 I would like some feedback ,Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?
Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy.
I see the WS-SVC-AGM-1-K9 was EOL Jan 2010,What is the suggested Product Migration Option? Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?,Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy. If the Anomaly Detector can alert us to this type of traffic, it will be much easier to stop them quickly.
we have a Cisco 5540 with ASA5500-SSL-100. We have been trying to load the ASA 5500 SSL VPN Premium user License on the appliance but we could not get a valid Product Authorization Key to use.
I just bought 2 Cisco3750 X Switches, After I open the box, there are too many numbers lables on the switch.
1. Which number is for product registration ? 2. Can any give me the link for product registration ?
BTW, can explain to me what is PAK, is it come with the switch ? Where I can find it ? I can find serial number but I don't know how to use it and connect with PAK.
I am pretty new to cisco and the learning community forums is truely one of a kind.Actually, I work on a company which deals the Cisco products, Routers/Firewalls/Switches and stuffs. I am sure you get the picture. What confuses me is the product licensing of ASA5500. To be more specific, we are proposing certain things. And that came with the product pricing sets and all. But I amn't having a clear picture on ASA 5500 Strong Encryption License (3DES/AES). Does that come inbuilt(free) or should there be any pricing behind that!?
I am looking at replacing an aging pair of 1410 bridges that are linking a three mile span, one building on top of a hill, the other down in the valley. I see the product is now EOL and EOS, so now what?
Looks like we're being pushed in the direction of this product: AIR-XLTC50DA31AK9
my roommate threw out the key code from my n series router, two pcs are currently connected to this network, I would like to add my iphone but need to find the key code on one of these computers..
A few days ago I had to reinstall my notebook and therefore I lost my network settings. I want to reconfigure my Linksys Wap55AG to let it use a new WEP key but I cant find the software to do so ANYWERE on the net.
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
I want to PAT my project of WLAN and i attached the document, how I create the Testing Criteria of the said scenarios, PAT document includes WCS 7.0, WLC 5508, MSE 3310, Cisco AP 3502e and ACS 4.2.
I've valid SAU service contract with WCS. Can I migrate from WCS (7.0.230..0) to latest version of NCS by downloading it from software center or I should purchase some SKU for upgrading to NCS?
Is anybody deploying ASA Services Module? I am looking for feedback/gotchas/advice for a migration from an ASA-5550 HA pair.I also received confirmation from Cisco that VPN termination is active in the latest 8.5/8.6 code releases, so hopefully should be able to fully retire my 5550's.
what options are available to a customer with 800 APs that is finally migrating to a centralised model and therefore migrating from WLSE to WCS? Assuming that they move to v8 of WCS can they upgrade their WLSE licenses to WCS?
Are there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.
I have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
1/ Primary Server as Authentication server & log collector
2/ Secondary server as Authentication server.
What is the best way to do the migration? Normaly, i can proceed as follows:
1/ Deregidter each server from the deployement ==> Make both the servers standaone 2/ Upgrade the Secondary server. 3/ Upgrade the Primary server (without migrate the log server). 4/ Join Servers to the deployement.
what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?
I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?
I am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available). After stopping WCS, I issued the export userdata C:WCS07Migrate. The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.
One contains multiple a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps. Was there something incorrect in my command? Can I use still use these files on NCS? Or do I need to redo the export on the WCS?
NCM is going away. It is recommend to move to LMS. We already have a LMS deployment. Currently just used for Monitoring/Performance.Trying to figure out how to get the Configuration change piece that we used NCM for into LMS. Not really having any luck.What I am really wanting to do is configuration archive, device config change notices (when a device config changes I can run report to see who and what was changed), and configuration comparisions (between old and new configs)
I need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4
I'm trying to get all the templates and Maps I've created in WCS into our new NCS. The instructions say just run the export.bat file on WCS and then Migrate into NCS. I cannot find any export.bat file on version 7.0.220.0 of WCS. Is it only available in WCS version 7.0.164.3 ro 7.0.172.0? Do I have to use the export.bat file or can I just do a regular backup and restore?
A customer is asking to upgrade their LMS 3.0 to Prime 1.1. However, the customer or their previous system's integrator never actually installed LMS 3.0. The licensing and PAK were never used as well. My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed? How would the migration of the current licensing work with the new licensing PAK if that is the case? Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?
Can't see this in the documentation, as only Solaris to soft appliance is mentioned, so does anyone know if you can migrate data from LMS 4.0.1 on Windows 2008 to the soft appliance on LMS 4.1?
We have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks. Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing? By the time the 5508 arrives I will have a very small window to setup the unit before a new wing goes live. I need the new unit as we have reached our limit of licensed AP's on the old 4404. It seems like everyone keeps talking about an easy way but no one says how to do it.
I have never setup one of these units before from scratch so I don't know how long it will take.
I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?
WCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.
