Windows 7 Pro 64bit Machine - Wireless Connection Very Slow And Dropping Regularly

Dec 31, 2011

It's a Windows 7 Pro 64bit machine with a (newly installed) Asus P8H67 pro motherboard and an Edimax ew-7612pln pci-e card, the router is a thompson 585v8 router with the latest firmware on (upgraded as part of troubleshooting). I upgraded the wireless card drivers one time whilst it was disconnected, it appeared to work for a few hours but then dropped again it also went through a phase of connecting to the router as an 'unidentified network' with no internet access although I don't believe it was attaining an IP address. When it was connected the internet was pretty slow and anything like a file down load would knock it off completely. There were no errors at the time of disconnection in the event log (bar a DNS error or two saying it could not locate the website I was trying to get to before it failed), however the only information type events I noted were a few services stopping and starting and an odd one regarding the host not being able to find the 'master browser' which was identified as another laptop on the wireless network.

The machines are not in the same work group or in a domain, all other laptops and devices on the network work fine and are very stable - as was this one up until a couple of weeks ago. I've uninstalled a couple of pieces of software that were recently installed ; VMware player (which added virtual NICs upon installation and funnily enough made the wireless reconnect after a few hours of downtime upon installation...but the effect was shortlived) and some asus mobo utilities.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Adapters :: AE2500 Installed In Windows 7 Machine - Dropping Internet Connection?

Mar 4, 2012

I am having problems after installing the ae2500 adapter in my win 7 machine had to remove malwarebytes and avg to get it to work but now it constantly has problems dropping the internet connection. I have to disable the adapter then enable it to reconnect to the internet. Are there other compatibility problems with this setup that I need to address?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Regularly Dropping Netflix?

Nov 18, 2011

When watching Netflix, I can get 5 to 15 minutes of a movie no problem. Then I will get an error message:Cannot connect to Netflix. try again later. If the problem persists

-        try again
-        exit
 
Then I can watch a few more minutes and it stops again. And again, and again......I have cable inernet service (Brighthouse Communications), with the E42000 connected to the cable modem. Then I have a Panasonic WiFi adaptor (DY-WL10) plugged into a USB port on my Panasonic Viera TV.   I have the latest firmware on the router (1.3.03, build 14).I have done the routine of re-cycling the network by re-setting the router (and re-setting it up) and the modem.The chat session guys had me do the following:
 
1)     Uncheck “Filter anonymous request”.

2)     Click on Setup Tab - Here you will see MTU.

3)     Select Manual & set the size to 1364

4)     On Wireless tab, clicked on manual, change the Channel for the 2.4 Ghz network to 9.

5)     When we tried it on the 5Ghz wireless they had me set the channel Width to 40MHz Only, and set to channel – 161
 
I also tried setting up port range forwarding. He knew the port information, and walked me through it.I have re-set the router to factory default settings, re-installed the software, and tried the previous steps twice more (except the port forwarding, because without my friend, I am not sure exactly how)  I know enough to not have multiple WiFi devices going at the same time while trying to watch Netflix, but I know that I get good WiFi download speed tests at the location of the TV with an iPad (3.6 MBPS).I have done troubleshooting on the internet service. It has a good, strong continuous uninterrupted speed.I have tried this on two different TVs (similar Panasonic models, bit with the same WiFi adaptor). Problem persists on both TVs.I tested it with a 50’ LAN Cable running from the router to the TV. Netflix worked when wired!Next test I want to do is to stream Netflix on the iPad, right at the TV and ensure that works.To me, this seems like a wireless router setting issue or an issue with the Network Adaptor, or an issue of communicating between the Router and the adaptor.

View 6 Replies View Related

Windows 7 64bit OS - Wireless Connection Keeps Failing Repeatedly?

Mar 18, 2011

I am having problems with my wireless internet. I am using windows 7 64-bit OS and am connected to a WRG614v6 Netgear router. I will be on the internet and will have superb connection then my connection will drop, when i view the network it says that i have lost IPv4 connectivity. Pulling the power to my router then powering it on again fixes the problem for a hour or two but then connection is lost again.Here is the readout when connection is stable

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:UsersKyle>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kyles-Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....

View 19 Replies View Related

Windows 7 Wireless Connection Keeps Dropping

Apr 24, 2011

This has been a problem 2 months ago and it is still not fixed My ping sometimes goes up to 500 and disconnects, usually every 10 minutes i disconnect from TeamSpeak3. My connection is 3 bars and drops down to 2 which is when it disconnects . My modem is only 4 meters away from me and another laptop is 2 meters away from it but it has perfect connection. My sister upstairs also has perfect connection. Im using Realtek 8185 extensible 802.11 b/g. Sometimes its worse and sometimes better but only by alittle bit

View 15 Replies View Related

Dell :: 1520 Internet Connection Via Wireless Losing Signal Regularly

Aug 27, 2012

dell 1520w-win7 64 bit pro version - installed new hd.  Internet connection via wireless losing signal regularly since new hard drive install.."DELL 1520 oem Broadcom Wireless not working. Tested using Win7 onboard system. Says everything was ok. Yet the wireless is not "on" on the 1520 laptop. Purchased a new one; had no OEM software. Purchased Win764 bit Pro version. Installed it; finally found the original OEM resource disk from Dell and installed it. I downloaded a later version of the driver and yet it is not working.Is there a problem created by Win7 installation? How can I wake up the wireless so it can wirelessly receive and send items to my Smart Phone."

View 5 Replies View Related

Severe % Dropped Packets On XP Machine When Windows 7 Machine On Network Not Switch

Aug 2, 2011

I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]

View 8 Replies View Related

Installed Network Printer On Windows 7 Machine / Now XP Machine Won't Print To It

Jul 20, 2011

New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.

View 11 Replies View Related

Wireless Driver For Hp G60-530us / Windows 7 64bit?

Mar 8, 2013

Looking for the wireless driver for hp g60-530us / windows 7 64-bit.I have installed a couple of drivers that haven't worked.

View 1 Replies View Related

D-Link DIR-825 :: Internet Connection Cutting Out Regularly

Nov 11, 2011

My D-link DIR-825 keeps loosing the internet connection from my modem regularly during the day and requires a reboot to get it to work again. The computer I'm using is wired to the router. Its very frustrating having to reboot it every 5 minutes

[code]....

View 13 Replies View Related

Windows 7 64bit - Home Wireless Location Settings?

Jan 14, 2012

Using win7 64 bit 1 pc upstairs and laptop down stairs,no need for file or printer sharing so its disabled. Is it right that the public location setting is the safest setting with the sharing option disabled,and that wpa etc is not used, If you know you won’t need to share files or printers, the safest choice is public network.

View 6 Replies View Related

Windows 7 Machine Does Not Detect Win Xp Machine

Apr 29, 2012

I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.

View 12 Replies View Related

Windows Xp Keeps Dropping Wifi Connection?

Apr 15, 2012

I have 2 computers. One is a Win 7 and the other is Win XP. They both can be connected to any of 3 WiFi connection in my building. I have no trouble with the Win 7 computer, but the Win XP computer keeps dropping the WiFi connection and get different error messages.

View 14 Replies View Related

Linksys Wireless Adapters :: Wmp200 Support Windows 7 64bit?

Nov 16, 2009

I have a Linksys wmp200 wireless adapter in my PC, and will installing windows 7 pro 64bit in a few days. I was wondering, does the wmp200 support Windows 7 64bit? If not, how can I get it working? It is very important that the internet works on this PC, so im hoping for minimal issues.

View 3 Replies View Related

Linksys Wireless Router :: Compatibility Of Wrt54g V8 To Windows 7 64bit?

Jul 6, 2011

will my linksys wrt54g v8 work with windows 7 with a 64 bit.  are there drivers available?

View 3 Replies View Related

Linksys Wireless Adapters :: Installing WMP600N With Windows 7 64bit?

Dec 26, 2009

I have tried running all versions of the setup program that came with the adapter. Even when I ran the compatibility program I still get error 211 adapter not recognized. When I looked in the device manager the adapter is listed but with problems. Under properties it shows windows cannot load the drivers required for this device error 31. I also tried updating the drivers from the device manager using the ones I downloaded directly from linksys website. The ones for the 64 bit windows 7?

View 9 Replies View Related

Internet Connection Dropping After Upgrading To Windows 7

Feb 28, 2011

I changed desktops to a new HP Desktop running Windows 7 and have been getting a headache every couple hours. Currently I have a Wireless network with a NETGEAR WGR614 V6 Wireless Router which worked fine until we changed computers. Now every couple of hours our internet connection looses connection on the main computer as well as other computer on the network that loose connection. Now once I come in and change the channel port on my router I get a internet connection but eventually its lost

View 1 Replies View Related

Internet Connection Dropping By Windows 7 Machines Only?

Feb 4, 2011

I recently added two Win7 computers to my ethernet network (one replaced an older computer, the other has brought the total to 4 machines). The original 2 workstations (XPpro) are fine, but the 2 new Win7 computers intermittently lose internet connection. They remain on the network, just lose internet. The 2 that are having the problem are wired directly to the first router, Linksys WRT160N. The 2 XP computers, that work perfectly, are wired 150 feet away, attached to a Linksys WRT54G used as an access point.The problem is much more severe on one of the new machines, with Win7 Home Deluxe - it stays offline about half of the time. The other, Win7 Pro, is occasionally waxed for 5 or ten minutes. Both use the Win7 default firewall & settings, I've added Avast free anti-virus but no additional firewall software. I have not noted any error messages other than the red X on the networking diagram, and the browser can't find page

View 2 Replies View Related

Sharing Kxp1121 From Windows 7 64bit To Windows Xp Pro 32bit

Dec 15, 2011

My win xp pro 32bit cannot add network printer kxp1121 from win 7 64 bit which is using epson lx series 1 (80). Request driver ' unknown Inf'

View 1 Replies View Related

Windows 7 64bit Networking With Windows 2003 32bit?

Apr 18, 2012

I wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder

View 1 Replies View Related

Linksys Wireless Adapters :: WMP600N Installation On Windows 7 64bit Ultimate

Dec 26, 2009

I have spend some time today trying to get my WMP600N-EU PCI Adapter installed. However up till now without any success. I run the installation CD with instructions, but the adapter is not found when I mount it into the PCI slot. I have tried both slots without success. Each time I get error 212.

View 8 Replies View Related

Linksys Wireless Adapters :: WMP54GS / Finding Driver For Windows 7 (64Bit)

Feb 26, 2010

I have the above mentioned WMP54GS.  And I just got a Windows 7 capable computer and got it installed.  Now I can't find a driver that will work at all.  Other than the Broadcom drivers that Windows installs naturally.  (The Broadcom drivers are terrible.  I play World of Warcraft and when before on my old Vista 64-Bit system I would get around 50 to 60 MS I now get 180 to 200. ) How to get this to work. 

View 9 Replies View Related

SB4200 - Motorola Cable Modem Regularly Drops Connection Restarts Itself

Sep 4, 2011

I have a Motorola modem SURFBoard SB4200, along with a wireless Linksys router that connects to that modem. The router works normally but the modem often dies and restarts itself after about 1-2 minutes.

What could be causing this problem? How should I start debugging it?

Could an excessive amount of network traffic be bringing down the modem? Are there any tools that can monitor the modem?

View 2 Replies View Related

Windows 7 Home Network Connection Dropping Intermittently?

Jun 28, 2011

I have a desktop computer and a laptop computer both running Windows 7 Home Premium. The desktop is connected to the router directly and the laptop is connected to the wireless network. When I restart both computers, I can see and access the other computer through the home network without problems. But after a while, sometimes just a few minutes, I can only see the other computer but cannot access it. Sometimes, I cannot even see the other computer. If I do a "ipconfig /release" and a "ipconfig /renew", it may sometimes correct the problem for a while.

I have looked at many related discussions on the web and none of the suggestions work for me.I have the firewalls disabled on both computers, as well as the ipv6 and IP service. I have also disabled the Bonjour service.I have turned a number of services, such as computer browser, server, workstation and many others to automatic as people suggested.

View 4 Replies View Related

Linksys Wireless Adapters :: Use WUSB54GC On A Computer With Windows 7 Home Premium 64bit OS?

Mar 2, 2011

I want to use this adapter on a computer with Windows 7 Home Premium 64bit OS.Downloads lists versions V1.0 and V3.0 for this adapter. How can I determine the version I have?V1.0 list no driver for Win 7 64bit. V3.0 list a driver for Win 7 64bit.Research I found looks like the adapter is not computable with Win 7 64bit.

View 2 Replies View Related

Toshiba Laptop Running Windows 7 Premium Internet Connection Dropping Out?

Feb 22, 2011

We have a new Toshiba laptop running Windows 7 PremiumWe have a sitecom modem router which is fairly new and already providing wireless to 2 other computers.I have connected to the router with the new laptop but for some reason it keeps dropping off the network, either saying "limited access" or "no internet access"t is well within range so I cannot understand why it keeps dropping off the connectio

View 11 Replies View Related

Using CISCO VPN On Windows 7 64bit?

Aug 23, 2011

I am using the following:

CISCO 2811 router.
Windows 7 64bit
CISCO Client 5.0.07.0440 64bit
HP Probook 4530s - 4 GB ram; Core i5

The issue is we recently purcahsed new laptops for our inspectors. They where running Windows XP 32 bit with CISCO Client 5.0.01 and every thing worked fine. When I upgraded them to the new laptops I am having issues with the VPN. The symptom is that the VPN connects ok and you can download files from the servers ok but when you try to up load a file that is larger than 80 KB it hangs on "Discovering Items..." then times out. What I have tried is:I hooked one of the laptops into the LAN and connect the VPN and the uploads work fine.I setup a SoHo router in our DMZ and hook the laptop to it and I have the problem my users are having at home as described above.Tryed truning off all Windows Fire Walls. -> Fails on upload.Tryed stopping the "Indexing Service". -> Fails on upload.Updated the CISCO client to the latest version. -> Fails on upload.Removed Anti-Virus. -> Fails on upload.Used IP addresses in place of FQDN. -> Fails on upload.We have other Windows VIST 32bit computers and they do not have these problems with their VPN. These are our first 64bit computers. I really do not want to down grade to Windows 7 32bit.I can make the running config available upon request but I doubt that is the issue being that our other computers are working fine but if there is something I need to do with the tunnel to get around this issue, I am game.

View 5 Replies View Related

Lan Is Not Working With Windows 7 64bit?

Sep 3, 2011

in windows 7 64 bit lan is not working

View 1 Replies View Related

How To Get Ip Address In Windows 7 64bit Laptop

Mar 6, 2013

i want to execute my project in lan so i need ip address in laptop.

View 1 Replies View Related

Netgear Duo RND2110 And Windows 7 64bit

Mar 18, 2011

I have a Netgear Duo RND2110 that I have installed in the system. One of the computers (Windows 7 Home Premium 64bit) will not allow me to access the Duo. I get the following message:-\192.168.?.?? is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you access permission. Login failure: accour currently disabled.

View 1 Replies View Related

Constant Disconnecting On Windows 7 64bit

Apr 23, 2012

I have a medialink USB adapter and medialink wireless router. I've had them configured for a couple of months and both seem to work fine. The issue is with only one system (main desktop computer running windows 7 64bit). I shut the system down over this past weekend and when I came back today, it said that it could not connect to the network and that the settings saved for my wireless network were incorrect.

After much frustration and googling, I finally performed a hard reset of my router (tiny button in the back) and redid all of the security settings (different SSID, different password). I finally got my desktop to connect to the network. When I connected, windows prompted me saying that I was sharing an IP address with another computer on this network. I canceled out of the prompt and my wifi worked fine. However, my computer has been randomly disconnecting from the network every few minutes for the last hour or so. I have to manually reconnect to the network every time this happens and it does not seem to stay connected for long periods of time. All other systems on the network (laptop and phone) do not have this problem.

Additional note: When first trying to fix the problem (before hard reset), I disabled the "Bonjour" service in windows AND ran the following command: netsh int ip reset C: esetlog.txt per a suggestion on a forum. I'm not sure if this would have changed anything even after the reset.

View 9 Replies View Related

Slow Down Internet Speed On One Machine?

Nov 4, 2011

My brother is spending far too much time on a silly internet game on his laptop (Maple Story) and its effecting his school and social life. We're trying to find a way to slow down how fast his internet speed is so his game runs poorly, hopefully making him stop playing. I've looked into blocking programs over routers but it seems like a tough job.

View 1 Replies View Related

Two Different HP Printers Won't Stay Online Windows 7 64bit

Jul 7, 2012

have two different printers hp 2570 and hp 1018 neither one will stay online . windows 7 64 bit for a computer lab situation on a windows 2000 server?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved