Wireless :: Strong Internet Signal But The Status Says No Connection?
Jan 4, 2012shows computer cant receive enough packets but there is strong internet signal
View 1 Replies
ADVERTISEMENT
Strong Wifi Signal But Very Slow Internet Connection
Jan 16, 2011I have a Linksys N Router connected to a Windows 7 computer. My wired connection through Comcast is an average of 25 Mbps. In the bedroom above me I have another computer with a Linksys N Adapter on Windows Vista. I am receiving a strong WiFi signal on an average of 240 Mbps. However, my internet downstream is less than 1 Mbps and the upload is over 3 Mbps. I've updated the router's firmware and reset it twice. I've also tried changing the channels and switching to broadcasting "N" only. Linksys won't facilitate because it's out of warranty.
View 3 Replies View RelatedStrong Wifi Signal / No Connection
Aug 28, 2012I just got a job at a School district that has an extremly old and basic network setup (No Firewall, only 2 accounts on the server Student and Teacher). They have two small buildings that have 1 wireless router on each floor about in the middle of the hallway. I am having a strange issue I haven't seen before with a windows 7 laptop that a few of the teachers in the district are having. They can see the wireless router on the network but everytime they try and connect it says "Windows Cannot Connect or is Denied Access". All the other laptops in the building connect fine.Heres what I have done so far.
-Power cycled the router, nothing.
-ipconfig /release, and renew, nothing.
-Getting closer to the router and connecting, nothing. (Also tried with a differant laptop in the room and it could connect no problem which confused me more)
-Updating the network card.(says it has the latest updates)
-Re-entering the network key, nothing
What I haven't tried is setting up manually a static IP. But do I need to do that? And if so how do I know which IP to give it is there a way I can generate a list of all the IP's on the network?
Dell :: 1545 Signal Strong But No Internet
Aug 25, 2012I have been having little to no connection to the internet on my laptop for the past few weeks. I have tried alot of the different ways to fix it on this site but its still not connecting.My laptop is a Dell inspiron 1545 and I have windows vista on it. Everything else hase wireless connections working but not my internet.
View 16 Replies View RelatedUnable To Connect To Strong Signal Wireless
Feb 5, 2013I have 2 PCs in my home both running windows 7. My PC is directly receiving internet (10mb/s broadband). I have tried a few times to set up wireless for my mother who has her PC in the other room. The problem I have is that all though her PC recognizes the signal from my wireless, when I try hit connect, nothing happens and it gives me troubleshooting options.
[code]...
Sony Vaio - Wireless Connection Strong But Internet Won't Connect
May 31, 2011Im using a Sony vaio laptop with windows vista. My Internet used to work perfectly and suddenly today my wireless will connect but I can't use the Internet. My iPhone and my aunts laptop can connect and work fine, it's just my laptop that has the problem. I've tried a system restore and a few other things but nothing seems to work
View 1 Replies View RelatedNot Getting Strong Signal When Used To
Feb 17, 2011Well I just recently got my computer back from Gateway.I sent it off to them because I was having overheating issues.Well they fixed that by replacing the cpu and fans. But now that I have it back I'm not getting a very good signal from my wireless router. I'm one room away from the router and it use to be full bars...Now I'm at a steady 2 bars, signal strength poor. I used to be able to pick up probably 20 networks that were close to me. Now I don't pick up any of those, just my own. I'm wondering what the heck happened! I've tried restoring my system but it didn't do anything. Also, if I go to Control panel and click on diagnose wireless adapter it will say it fixes it, and then a bunch of networks pop up, all good strength, even mine will have full bars for about 30 seconds, then boom, all the other networks disappear and mine goes clear down to 2 bars.
View 7 Replies View RelatedGetting Strong Signals But No Internet Connection On HP G60
Oct 4, 2011got a strong signal but can't connect to net, on a hp g60, after restoring factory setting
View 2 Replies View RelatedStrong Signal But IPv4 / 6 Can't Connect
Jul 10, 2011So I have been trouble shooting this for just over a day and still nothing, but anyways. My computer says that I am connected to the wireless router and that I have great signal strength but I have no internet access from either my IPv4 or IPv6. I have been using the cmd commands such as netsh reset, and the like. I have restarted both modem and router a few times as well as my computer. Also just did a recent avg scan and firewalls are all off. This is all coming from my mac laptop which is connected just fine which leaves me even more confused.
View 12 Replies View RelatedD-Link DIR-655 :: Wi-Fi Signal Strong - Password Not Accepted
Jun 28, 2011I bought this router (DIR-655) some time earlier this year, so it hasn't even been half a year that I've owned the thing. I set it up in the small duplex I was sharing with my sister and it worked quite well. Actually... for the first 45 minutes I was freaking out because I was getting practically no signal, then I realized I had forgotten to screw in the antennas... but that little anecdote aside, it worked fine.
I've since moved into a new place. I got a new modem, still on Videotron, I just upped the speed from 7 MB/sec to 15 MB/sec. Before setting up the router I inserted the CD that came with it and followed the instructions therein... things seemed fine, except that he automatically used the same network name that I used at my last place... almost like he was stuck on it. I couldn't figure out how to create a fresh new network. But I shrugged it off and continued, entering my own password and everything else.
Now, at the end he gave me 4 pieces of information,
A router password. A network name (SSID), this is the one who's name was stuck to the old one. A network security type, I went for Most secure(WPA) And the network security key, this was a randomly generated alphanumeric code of some sort.
I copied this in two different ways and the installation wizard automatically saved me a copy onto the desktop, so I know for certain I got the passwords right. I pulled out my iPad later, saw the network, a good strong signal, and tried to connect except it's not accepting my password. The password I triple-saved and checked without a shadow of a doubt. On a whim I tried to use the Security Key, and that seemed to connect for some reason, but it is considerably slower than it was at my last place.
The modem isn't to blame (it's running on double the speed now) and the signal strength is good. It's just that something gone weird with the password, and it feels very slow. Even if it wasn't slow, I would really like to know why none of my wifi devices are accepting the password I assigned.
And I used that http://192.168.0.1/ trick to look into the router settings from my computer. I changed the network password into something new. And still none of the devices will connect, they keep telling me it's the wrong password. I am only able to connect through the Security Key and I don't like that! I tried to contact D-Link's technical support the other day, but it drew on for so long my cellphone actually ran out of minutes.
Short Version: None of my wifi devices are accepting the password I gave during the setup and I don't know why!
I'm running a 64-bit Windows 7 on 1-year old dual-core desktop computer.
Xirrus Wifi Inspector - To Gain Strong Signal
Oct 30, 2012I am using Xirrus WiFi inspector to survey the signal in y house and I notice a very strong signal at 160dBmMy home signal is in the region of -60 dBm so I am surprised to see such a strong signal at 160I have attached a screen shot so you can see BTOpenzone and BTHomeHub-WM9R with a high power.
View 3 Replies View RelatedLaptop Cannot Maintain Strong Connection To Wireless
Sep 5, 2011I mostly use my computer in my house, so I am not sure if it is a network problem, or something is wrong with my laptop, but I am having a lot of trouble maintaining a constant connection lately. Often times, I try to load a page and it says "connection reset" or whatever.I have a Dell Studio laptop with an Intel WiFi Link 5100 AGN wireless card. I am using the Broadcom Netlink driver along with Microsoft Miniport Adapter (all of this info came from my Device Manager). I'm running Windows 7 Home Premium 64-bit, 4GB RAM, Intel Core 2 Duo T6500 2.10 GHz, Service Pack 1.
View 10 Replies View RelatedWireless Connection With Excellent Signal Strength - Cannot Use The Internet Though
Jan 2, 2012I am using a desktop PC with a wireless USB stick attached in order to connect to the internet via a wireless router, however, although it states that I am connected with excellent signal strength, it continues to show a warning sign over the wireless connection signal bars ON THE DESKTOP TRAY ONLY. I can't surf the web on my desktop or on my IPAD through the wireless connection in which both devices detect. I have a Sitecom wireless router.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) D CPU 2.66GHz, Intel64 Family 15 Model 4 Stepping 7
[Code].....
WRT150N - Wireless Signal Showing But No Internet Connection?
Jul 2, 2012I recently moved and changed computers, but ive been trying to setup my Linksys WRT150N. I had one cable coming from the modem and into the port on the router labeled "internet" and then another cable coming from one of the router's ethernet ports, going into the PC.
I opened a browser and typed in 192.168.1.1 into the address bar and got to the setup page. When I search for wifi using either my laptop or my droid, it shows that there is an excellent signal and will connect to it, but when I try to perform a task that would require internet, it says that there is no internet access.
Webpages Sometimes Won't Load With Strong Connection
May 31, 2012I have been having some trouble lately with my internet since I have been home from college. I have no problem connected to my router wirelessly, and I always have a strong connect seeing as I am no more than 15 feet from the router. The problem arises sporadically for different intervals. One second I will be browsing the internet with no problem, and the next second I am unable to load any pages.
I was just in a Skype conversation with one of my friends and had a perfect connection with them. I was on twitter at the same time, when suddenly the pages stopped loading. The weird thing is, my connect was still strong while video chatting and it did not cut out. Why my web pages will not load while I still apparently have a strong connection.
TP-Link 300Mbps Wireless :: TL-WR841N - Get No Signal / Internet Connection On Computer
May 14, 2013Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
Dell :: 1520 Internet Connection Via Wireless Losing Signal Regularly
Aug 27, 2012dell 1520w-win7 64 bit pro version - installed new hd. Internet connection via wireless losing signal regularly since new hard drive install.."DELL 1520 oem Broadcom Wireless not working. Tested using Win7 onboard system. Says everything was ok. Yet the wireless is not "on" on the 1520 laptop. Purchased a new one; had no OEM software. Purchased Win764 bit Pro version. Installed it; finally found the original OEM resource disk from Dell and installed it. I downloaded a later version of the driver and yet it is not working.Is there a problem created by Win7 installation? How can I wake up the wireless so it can wirelessly receive and send items to my Smart Phone."
View 5 Replies View RelatedConnection Shows Strong Signals But Can't Get Online
Sep 19, 2011I have 2 laptops, a DELL (windows XP home) and a Toshiba (windows 7).i suddenly couldn't get online with my Toshiba a week ago. Looks like I'm connected, but just can't send out. I changed to the DELL and all was fine for days, then I suddenly couldn't send out for a website with this, either. My connection shows strong, and can receive, but can't send out. This is a secure network (supposedly). I've rebooted, and have internet phone that works, so it's not the modem.
View 5 Replies View RelatedAcer One Can't Find Server - Connection Strength Strong?
Mar 2, 2011i bought a second hand acer one net book for my daughters birthday in a couple of weeks when i first tried it it work i could go on the net, now it wont says can't find server. connection strength is strong 100% system is running ubuntu.
View 1 Replies View RelatedInternet Connectivity Is Not Always Strong?
Oct 28, 2012I currently have a 20MB down and 2MB internet. I have a Cisco Linksys E4200 with Firmware Version 1.0.05. We have a two bedroom apartment, one of the bedrooms is our office which is by the front door. We have the wireless router and our modem in the office. We have an apple TV in our living room that is connected to the wireless internet. Every time we get random times where the video output is very pixely and seems we are streaming shows/movies on a 56k modem.
View 1 Replies View RelatedWireless :: Network Connection Status Cannot Be Confirmed?
Dec 2, 2011the product keeps saying that a network error has occured however, when i check the network status it says connected and the signal strength is at 100%.
View 1 Replies View RelatedFixing Limited Or Connectivity Status Of Wireless Connection
Jan 21, 2011Fix limited or connectivity status of wireless connection
View 1 Replies View RelatedLaptop Gets Excellent Signal But No Internet Connection
May 20, 2012laptop gets exellent signal from router but no internet connection
View 4 Replies View RelatedInternet Connection Slow Speed / Weak Signal?
Aug 31, 2011We have cable internet through a wireless router. It seems to be the case that after we have had a router for about a year, my wife begins having trouble with her internet connection; slow speed, no connection, weak signal, etc. Resetting the router and cable modem will fix the problem, but the fix is only for a short time (an hour or a day). We purchase and install a new router, and everything is fine for about a year, then the problems re-emerge.I can't believe that a router "wears out" after a year or so, but that is certainly how it appears.My wife has a Toshiba laptop running Windows 7, I have a Mac, and our son has a Samsung with WIN 7. I don't experience these problems, and my son does not to the extent my wife does. There is obviously something going on with the Toshiba or its interface with the router, but rebooting the computer doesn't have any effect.
View 1 Replies View RelatedD-Link DIR-655 :: Wireless Connection Showing Up N On Windows 7 But G On Router Status Page?
Sep 26, 2010My wireless connection for my laptop is showing upas N on Win 7 but G on DIR-655 status page??? I'm confused. Am I getting N speeds/coverage or stuck with G. If G, why? I've tried wiping my wireless network config. on Windows and reestablishing it, but no change. The DIR-655 config page shows my machine connected at 54 Mbps and Type as G
View 8 Replies View RelatedLinksys Wireless Router :: EA6500 Device List Connection Status
Dec 18, 2012I have the Linksys EA6500 with the latest firmware and have a question regarding the device list connection status.Currently, I am seeing devices in the list that have a connection status of live, but they are not even within my home network. What is the update/cycle time for the device list actually checking connection status of a device?In my situation, it has been 3 days (72 hours) since the two device showing as connected have not been connected to my home network/router. Noticed that this inaccurate connection status for these devices is also contributing to the Device Monitr app not showing correct device connection status info.
Would like to have real-time device connection status if possible. This device list is great way to know when device get connected or disconnected which let me know when my kids get home from school or using game console when should be doing homework.
Use A Linksys Cable Modem Cm100 With A Strong Srt4669x Decoder To Browse The Internet?
Oct 31, 2011How possible is it to use a linksys cable modem cm100 with a strong srt4669x decoder to browse the internet?
View 4 Replies View RelatedD-Link DIR-615 :: Toshiba Will Keep 3 Bars Of Signal / Will Not Keep Constant Connection To Internet
Dec 17, 2011I just got a new 2011 Toshiba Satellite L755 laptop with Windows 7, I also have a 2006 Compaq Presario with the original Windows Vista. We use a DIR-615 router for WIFI connection on both. The old Compaq will keep a connection with no problem and never looses a connection. The new Toshiba will keep 3 bars of signal but will not keep a constant connection to the internet. Do I need to upgrade my router, which I bought the one I have about 3-4 years ago, or could it possibly be a problem with my new computer?
View 5 Replies View RelatedWireless Status Is Connected But Internet Won't Work
Sep 24, 2011Wireless status is connected but internet won't work
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersNate>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
Wireless Internet Says Connect Again But Computer Status Showing Connected?
Nov 3, 2012I am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
View 1 Replies View RelatedLAN Connection Gets Disabled By Itself On Idle Status
Feb 22, 2012LAN connection gets disabled by itself on idle. Sometimes BSODs.A few days ago I tried connecting a MBlaze modem to my laptop (Windows 7 Ultimate 32 bit) to access internet. But it resulted in instant BSOD everytime.I deleted the modem software after that & didn't try to connect it again.But now, whenever I connect using my LAN broadband, connection works fine as long as I am continuously browsing something. But as soon as I stop browsing and it goes in idle mode in about 10-15 minutes, the connection gets disconnected. In the adapter properties, it shows that the driver is working properly. If I try to disable or uninstall it it doesn't give a response. The only solution to this is a forced shutdown & restart, after which it works fine untill not idle. I am not able to download anything because of this.I tried many things like reinstalling the network adapter driver, unchecking the power management feature, resetting the connection, etc. but nothing is working.
View 5 Replies View RelatedGet Strong Wireless Performance In A Large House?
Feb 20, 2013I am trying to brainstorm some ideas for the best wireless set up in a house that is 2 stories and 8500 SQ Feet. The house is wired with ethernet jacks.
Option 1. ASUS RT-N66U and Hawking Hi-Gain HWREN1
Option 2. Two Apple Airport Extreme's at either end of the house.
Option 3. Asus RT-N66U and Linksys WRT54G (DD-WRT Firmware).
What about the placement of the equipment? Should there be one router/access point on each floor or just two at either end of the house.
Cisco Wireless :: WLC4402 - Put Strong Encryption Mode?
Feb 14, 2012I have one WLC 4402 & arround 29 Access point (1130) in our enterprise network. Wireless users LAN segment is diffrent from wired users.Wireless users like Laptop users, Mobile users & ipad users which are connetced with this wireless & using enterprise network.
Presently we are using WEP mode for security key. This WEP key are week & can be cracked easily. so security point of view i want to put strong encription mode.Presently i do not have any radius server.I found there are some modes are available Like WPA, WPA2 with PSK etc.
will there any problem with wireless users to access application after changing the mode? Which mode will be stronger & could not be crack. Could we achieve without radius server or not?