I am trying to brainstorm some ideas for the best wireless set up in a house that is 2 stories and 8500 SQ Feet. The house is wired with ethernet jacks.
Option 1. ASUS RT-N66U and Hawking Hi-Gain HWREN1
Option 2. Two Apple Airport Extreme's at either end of the house.
Option 3. Asus RT-N66U and Linksys WRT54G (DD-WRT Firmware).
What about the placement of the equipment? Should there be one router/access point on each floor or just two at either end of the house.
In my house I have a BT Business Hub wireless router at one end of my house. I am looking to extend the wireless range of my network into the kitchen at the other end of the house, which is a rather large distance away. The house is 200 years old with large corridors and thick walls. There is absolutely no wireless range from about halfway between the office and kitchen. I initially tried two powerline adapters which did not work. Having spoken with an electrician who carried out a rewire on the house, I have been advised that the two areas are on a separate ring main.I considered using two wireless range extenders, but have been told that the signal is halved for each extender that I use.So, I have had the idea of trying to use two DSL routers at each side of the house. There is a phone point in the office and also in the kitchen, where the second router would plug into. These are both on the same telephone line.
I have 2 PCs in my home both running windows 7. My PC is directly receiving internet (10mb/s broadband). I have tried a few times to set up wireless for my mother who has her PC in the other room. The problem I have is that all though her PC recognizes the signal from my wireless, when I try hit connect, nothing happens and it gives me troubleshooting options.
I mostly use my computer in my house, so I am not sure if it is a network problem, or something is wrong with my laptop, but I am having a lot of trouble maintaining a constant connection lately. Often times, I try to load a page and it says "connection reset" or whatever.I have a Dell Studio laptop with an Intel WiFi Link 5100 AGN wireless card. I am using the Broadcom Netlink driver along with Microsoft Miniport Adapter (all of this info came from my Device Manager). I'm running Windows 7 Home Premium 64-bit, 4GB RAM, Intel Core 2 Duo T6500 2.10 GHz, Service Pack 1.
I have one WLC 4402 & arround 29 Access point (1130) in our enterprise network. Wireless users LAN segment is diffrent from wired users.Wireless users like Laptop users, Mobile users & ipad users which are connetced with this wireless & using enterprise network.
Presently we are using WEP mode for security key. This WEP key are week & can be cracked easily. so security point of view i want to put strong encription mode.Presently i do not have any radius server.I found there are some modes are available Like WPA, WPA2 with PSK etc.
will there any problem with wireless users to access application after changing the mode? Which mode will be stronger & could not be crack. Could we achieve without radius server or not?
Im using a Sony vaio laptop with windows vista. My Internet used to work perfectly and suddenly today my wireless will connect but I can't use the Internet. My iPhone and my aunts laptop can connect and work fine, it's just my laptop that has the problem. I've tried a system restore and a few other things but nothing seems to work
I have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
my dad wants me to get on expanding our home network (getting wireless into other places in the house). i do consider myself pretty tech savvy ( i just built my computer from scratch) but this is a little bit beyond my comfort zone. the 4 ports on the router are keeping me tied up and the size and layout of the house are restricting the wireless range
4 pcs running windows xp to windows 7 3 laptops running xindows xp, windows 7 and windows 7 starter (netbook) 1 xbox 360 1 ps3 (looking to add netflix capable bluray players on 2 tvs in the future)
the downstairs layout (router is the star)
the upstairs (red is range of current setup thats a stretch) (blue wanted coverage)
not to scale and a quick draw the top half of the house is off set from the basement area. i used google earth to estimate the range from the router to the outside area of my wanted coverage area and its roughly 80 feet through 4 walls and the flooring i do not believe theres a single router capable of doing that without dropping some serious cash down.as is all the ports are currently tied up, and id like to expand the number of ports, along with getting wireless to the area i pointed out, i have the capability of pulling hard wire through out the house also.
Can 2 wireless routers work in the same house if they are from 2 different internet providers? the reason why im asking is. my girlfriends daughter is getting here internet from cable. and its not very fast speed. i can get AT&T U-verse Internet. from my phone company for half the price and get more speed
Well I just recently got my computer back from Gateway.I sent it off to them because I was having overheating issues.Well they fixed that by replacing the cpu and fans. But now that I have it back I'm not getting a very good signal from my wireless router. I'm one room away from the router and it use to be full bars...Now I'm at a steady 2 bars, signal strength poor. I used to be able to pick up probably 20 networks that were close to me. Now I don't pick up any of those, just my own. I'm wondering what the heck happened! I've tried restoring my system but it didn't do anything. Also, if I go to Control panel and click on diagnose wireless adapter it will say it fixes it, and then a bunch of networks pop up, all good strength, even mine will have full bars for about 30 seconds, then boom, all the other networks disappear and mine goes clear down to 2 bars.
I currently have one wireless router in my house. Of course its hooked up the the modem, but i also have it hooked up directly to my desktop considering the router is on the desk where my computer is.I recently moved to a new house.One of the rooms has a huge brick wall in it, unfortunately the computer is in that room.AND, its on the far left side of the house, so the other side of the wall barely gets any signal (Enough to work, but it bounces and only gets about 2 Megabytes Per Second, which is awful, because the router sends out 20 megabytes per second due to our internet plan.) Now, my room is all the way on the far right side of the house, in my room, i get barely any connection at all, 20% is normal in my room. I have my Playstation 3 in my room, so I had to wire an ethernet cable from the wireless router, up through the attic, to my PS3. I can now get 20 MBPS while playing video games. While that is great, i still don't have a wireless connection back there.
What i want to know is, can i plug in another wireless router to the ethernet cable in my room, sending out another signal. So basically, im plugging up a wireless router to another wireless router, and want them to both send out internet.I plan on getting a gaming laptop in December and will be playing it most of the time in my room. I need to know if this is possible, and if it is, how do i do it?First off, let me state that moving the computer or router in front of the brick wall is completely out of question.Also, know a lot of stuff about computers, but know almost nothing about networking.
Have two desk top pc's in metal building office they are operating by way of DSL modem my provider is Century Link. I purchased a WRT 54Gl linksys wireless router hoping I would be able to get a WIFI signal to my house. I have no live phone lines in my home just the one in my metal building , how can I get a signal through the metal building to my home in order to use wifi on my Ipod and Iphone . Keep in mind I am 200 ft from my home and have a wooden shop and another metal building to go through to get to my home.
I have a guest House with 10 rooms The wireless network in not secured as we are in the middle of nowhere One guest has mentioned that she thinks her files have been accessed over the network (by another guest?)
I've never been very good with networking, and this is my first post to these forums, but essentially, what I would like to do is build a wireless network throughout my house, and fortunately it is a new build and I have already had hard-wires installed to the first floor and basement, with the primary connection point being my office on the 2nd floor.What do I need to do, hardware wise, to have a single wireless network throughout the house instead of 3 different wireless routers or something like that?
I'm living in a house with 6 people on 2 floors, and the router isn't handling all the traffic well. I have an extra router that might be able to serve as an wireless access point, but from what I've been told that wouldn't solve anything if the problem was that the first router doesn't have the capacity for that much traffic. It's a 50+ dollar wireless N router though and fairly new (forgot the model number)
My parents house is basically an old ranch style home that was added on to with a 2 story + basement. So I can only guess at the materials between where the signal is weak and where I have installed a DGL-4300 (Dlink Wired and Wireless gigabit router). It resides in the basement which is directly under the 2 story part of the house and everything on any floor of that section seems to get a good signal.
Admittedly I haven't done a lot of extensive testing since I really don't have much stuff that has wireless connectivity, and the one laptop they have is fairly stationary sitting right on top of the wireless router 2 floors up.....signal strength is always good to it.
However the older section of the house gets a pretty weak wireless signal and now with everything being wifi ready I am going to see about solving it. For instance, I've had a hell of a time connecting an older Zune 2.0 8gb version to the wireless network anywhere in the house, I just assumed it was broken or puking on the wireless security which is some version of WPA I can't recall atm if it's one in particular or set to both. But I temporarily disabled all security to see if it would connect and the router saw the device connect with a 20% signal strength for a bit, then the Zune started puking on connecting ..again.
I figured small device, it might even be broken. But I know the signal strength to the older section is not going to be very stellar anyway because the signal on a direct path has to pass through concrete walls and then a concrete foundation......plus it has cordless phone systems to compete against in that same space is has to travel. And anything the kitchen appliances and such might be interfering with it since it's potentially in the way as well.
So, any low cost solution (less than $50 dollars) I can hook into the existing wired network and will play nice with the existing Dlink router as it's going to remain the boss since it was fairly costly and works fine. To work as an extension of the same wireless network.....
I really don't have a problem with updating firmware, connecting into the device to configure it...or even putting new software on it if the directions are decent. The only thing I really care about is that it is cheap, has the capability to fit my bill. I'd guess it'd need to cover a 50 foot circular span with a strong signal and maybe 75 feet out with a medium strength to make sure there's no too weak spots or close up any potential dead spots due to materials used in construction. Oh and it has to be very stable or be pretty stable and have a remote reboot that'll clear up issues, I used to have a linksys router I had to reboot probably once a week to keep it working but it had to be power cycled. It was in the basement, near the patch panel the house has and it got old enough that I got the Dlink to replace it even though it was still functioned besides the freezing/sluggish performance issues requiring power cycles.
I need setting up a wireless home network. I have never done much networking, beyond linking two PCs directly together. This is my first time setting up a network that has multiple PC/devices accessing it.
It's a big house and has two floors. More importantly, it has impossibly thick walls. The walls are between 18 to 24 inches of solid stone (perhaps to repel a tank invasion?). I want to be able to get at least 15-20 Mbps to the furthest reaches of the top floor, in order to stream high quality HD video without a hitch.
I have settled on the ASUS RT-N16 router, unless a better option presents itself. It's one of the more decently priced high-end router available to me. It has decent signal strength (3rd on the MaximumPC router round-up), supports Tomato USB etc. I also intend to use the router to as NAS, plugging in an external HDD to one of the USB ports provided.
Despite its decent wireless strength, I doubt I will get close to the required Wifi throughput. Here is my plan to get around that. Let me know if there are any problems with it or if it can be done better. I intend to run an Ethernet cable from one of the router ports to the top floor, and attach a cheap .n router at the other end, to act as a wireless access point.I am unsure if this will meet all my requirements.
1) Will there be any problems with having one router connect to the other?
2) Will external HDD connected to the RT-N16's USB port, configured as a network share, be accessible as such to any device connecting to the secondary network?
3) What kind of cable will be needed to connect the two routers (provided this configuration is viable)? I remember that cable type used to depend on what's connecting to what, e.g. cross-crimped cable for attaching two computers directly without a hub or switch etc.). I don't know if these concerns are still valid.
4) Will I be able to access the configuration page of the primary router from devices connecting to the secondary router's network? I intent to run some apps on the primary router and would like to be able to check on them from the upper floor as well.
5) Will there be an impact of the speeds? The N16 as Gigabit Ethernet ports, which I doubt the cheap router will have. I don't think that should effect the speeds, but like I said, I have next to no experience in this area.
I currently have a 20MB down and 2MB internet. I have a Cisco Linksys E4200 with Firmware Version 1.0.05. We have a two bedroom apartment, one of the bedrooms is our office which is by the front door. We have the wireless router and our modem in the office. We have an apple TV in our living room that is connected to the wireless internet. Every time we get random times where the video output is very pixely and seems we are streaming shows/movies on a 56k modem.
where i am from, the houses are made of conrete. so obviously my wi-fi degrades. i currently have 1 basic wireless g linksys router set up, in my bedroom as thats where the primarry devices are. there is a portion of the house where the signal is non existant and i want to set up a 2nd wireless router for that area to have signal. its a fairly large house with 4 bedrooms.here is a breakdown of the device priority:
The main room (my room, east end of house) Gaming PC (gaming, downloading, netflix streaming) non wireless Wife's Laptop (occasional streaming, general internet surfing) PS3 (gaming and netflix streaming) Ipad (streaming)
[code]....
The general purpose of all this is just have wireless across the whole house for mobility, my room is the priority as far as bandwidth usage and coverage.Also i will be purchasing an N router for my room and moving the G router to my moms.
I have a house with two flours and all rooms have an ethernet port.The first flour has a main router which all rooms connect to (via wires) and this router dials to the internet. This router is also responsible for DHCP etc, and its a D-Link 6740VN.The other flour has the following setup: Wall-> Cross Cable -> D-link 2760U Router -> PC.My goal is to have two routers that broadcast wireless access. So when I'm on the first flour I'm connected to the main router, and when I move around the house with my phone I want to pick up the second router automatically.I've tried all sorts of combinations and settings and can't get it to work.
1. Tried setting different SSIDs, channels etc but the phone won't switch routers because the range is overlapping. 2. Tried setting the same SSID, channel, security, etc... also no luck. The phone only sees one AP but I don't see improved signal as I move around. 3. I don't want to use wireless bridging because a) It's slow and b) I have the wires in the walls and it feels like a wast.
I've got an E4200 at my house. I'd like to know if it's possible for my to establish a VPN connection from a remote location to login to my E4200 to get access to my computers behind the firewall.
I have a Linksys wireless-g broadbrand router ( WRT54G ) in my bedroom along with my cable modem and everything runs fine in my room. But I also have a pretty old computer in another bedroom about maybe 15 or 20 feet away from the current setup. On that computer I have a wireless g adapter that's connect through a usb port and has very low signal strength. I sometimes use that computer and I'm always getting kicked off I'm guessing because the signal cuts out. So, today I plugged in the adapter in my room with my setup and had amazing signal. What can I do to give that other computer a good boost? I know I should update that computer but I'm guessing I also need to somehow boost the signal somehow.
deploying a large wireless network (about 14 access points) spread across 9 buildings that are in relative close proximity to each other. I have included a picture with a rough scale (it's editable, so feel free to play around with it). Anyways, here is the basic idea. I do basic IT consulting for small businesses and some friends of mine work for an apartment complex in my local area. They came to me with this idea of deploying a wireless network on the campus to provide their tenants with "free" basic wireless internet. Basic meaning, not intended to be a replacement for a private connection. But suitable for basic web browsing, school work (I live in a university town), and email. So I got to scratching my head and quickly realized that I need to dome some learning and refresh on my skills.
I am trying to set up a network that is over a larger area than I am use to. I have experience setting up wired networks for small and medium sized businesses, as well as setting up multiple access points to cover a larger area. My goal is to set up a work site trailer to provide wireless coverage for a farmer's field. The largest distance I am dealing with is a half a mile. Depending on the field the direction the signal ranges from 90 to 180 degrees. My problem is my lack of experience with the hardware to accomplish this. I am trying to figure out what is the easiest cheapest and most reliable way to accomplish this. Currently my plan is to use a Cisco WAP4410N access point and hooking it up to multiple high gain unidirectional antennas. Is there a reliable website out there to accomplish this without wasting money on trial and error? I don't like starting a project before can this be accomplished? What should I be looking for in an antenna? How many degrees offset should they be? What kind of wire should I be running from the antenna to the access point?
I have to transfer upto 50G of data over a Netgear 300 Mbps N300 router between too laptops both connected wirlessly to the same router. However, I get only 200 - 300 kbps when I transfer data? I get a faster speed when I download files off the web.
I just got a job at a School district that has an extremly old and basic network setup (No Firewall, only 2 accounts on the server Student and Teacher). They have two small buildings that have 1 wireless router on each floor about in the middle of the hallway. I am having a strange issue I haven't seen before with a windows 7 laptop that a few of the teachers in the district are having. They can see the wireless router on the network but everytime they try and connect it says "Windows Cannot Connect or is Denied Access". All the other laptops in the building connect fine.Heres what I have done so far.
-Power cycled the router, nothing. -ipconfig /release, and renew, nothing. -Getting closer to the router and connecting, nothing. (Also tried with a differant laptop in the room and it could connect no problem which confused me more) -Updating the network card.(says it has the latest updates) -Re-entering the network key, nothing
What I haven't tried is setting up manually a static IP. But do I need to do that? And if so how do I know which IP to give it is there a way I can generate a list of all the IP's on the network?
I have been having some trouble lately with my internet since I have been home from college. I have no problem connected to my router wirelessly, and I always have a strong connect seeing as I am no more than 15 feet from the router. The problem arises sporadically for different intervals. One second I will be browsing the internet with no problem, and the next second I am unable to load any pages.
I was just in a Skype conversation with one of my friends and had a perfect connection with them. I was on twitter at the same time, when suddenly the pages stopped loading. The weird thing is, my connect was still strong while video chatting and it did not cut out. Why my web pages will not load while I still apparently have a strong connection.
So I have been trouble shooting this for just over a day and still nothing, but anyways. My computer says that I am connected to the wireless router and that I have great signal strength but I have no internet access from either my IPv4 or IPv6. I have been using the cmd commands such as netsh reset, and the like. I have restarted both modem and router a few times as well as my computer. Also just did a recent avg scan and firewalls are all off. This is all coming from my mac laptop which is connected just fine which leaves me even more confused.
I have two desktop computers upstairs.The main pc has the Linksys G Router and the other pc is wireless with a network adapter. All works fine here.Downstairs and on the other side of the house, I use my laptop which is wireless to the network. I also have a 46" hidef tv hooked up to a blu ray player and also connected to the network with a wireless adapter. I use Netflix to stream movies and seem to be having a problem with the signal in this room, both on the tv and my laptop. I sometimes only have 2 bars on my laptop and frequently get disconnected to the internet. When I am streaming movies or tv series, I get frequent stops and starts.
I am guessing that the signal is just not strong enough to reach this far from the router. Would switching to an N router be better for streaming? Would another G router downstairs solve my problem?
