Strong Signal But IPv4 / 6 Can't Connect
Jul 10, 2011
So I have been trouble shooting this for just over a day and still nothing, but anyways. My computer says that I am connected to the wireless router and that I have great signal strength but I have no internet access from either my IPv4 or IPv6. I have been using the cmd commands such as netsh reset, and the like. I have restarted both modem and router a few times as well as my computer. Also just did a recent avg scan and firewalls are all off. This is all coming from my mac laptop which is connected just fine which leaves me even more confused.
View 12 Replies
ADVERTISEMENT
Feb 5, 2013
I have 2 PCs in my home both running windows 7. My PC is directly receiving internet (10mb/s broadband). I have tried a few times to set up wireless for my mother who has her PC in the other room. The problem I have is that all though her PC recognizes the signal from my wireless, when I try hit connect, nothing happens and it gives me troubleshooting options.
[code]...
View 5 Replies
View Related
Feb 17, 2011
Well I just recently got my computer back from Gateway.I sent it off to them because I was having overheating issues.Well they fixed that by replacing the cpu and fans. But now that I have it back I'm not getting a very good signal from my wireless router. I'm one room away from the router and it use to be full bars...Now I'm at a steady 2 bars, signal strength poor. I used to be able to pick up probably 20 networks that were close to me. Now I don't pick up any of those, just my own. I'm wondering what the heck happened! I've tried restoring my system but it didn't do anything. Also, if I go to Control panel and click on diagnose wireless adapter it will say it fixes it, and then a bunch of networks pop up, all good strength, even mine will have full bars for about 30 seconds, then boom, all the other networks disappear and mine goes clear down to 2 bars.
View 7 Replies
View Related
Aug 28, 2012
I just got a job at a School district that has an extremly old and basic network setup (No Firewall, only 2 accounts on the server Student and Teacher). They have two small buildings that have 1 wireless router on each floor about in the middle of the hallway. I am having a strange issue I haven't seen before with a windows 7 laptop that a few of the teachers in the district are having. They can see the wireless router on the network but everytime they try and connect it says "Windows Cannot Connect or is Denied Access". All the other laptops in the building connect fine.Heres what I have done so far.
-Power cycled the router, nothing.
-ipconfig /release, and renew, nothing.
-Getting closer to the router and connecting, nothing. (Also tried with a differant laptop in the room and it could connect no problem which confused me more)
-Updating the network card.(says it has the latest updates)
-Re-entering the network key, nothing
What I haven't tried is setting up manually a static IP. But do I need to do that? And if so how do I know which IP to give it is there a way I can generate a list of all the IP's on the network?
View 2 Replies
View Related
Aug 25, 2012
I have been having little to no connection to the internet on my laptop for the past few weeks. I have tried alot of the different ways to fix it on this site but its still not connecting.My laptop is a Dell inspiron 1545 and I have windows vista on it. Everything else hase wireless connections working but not my internet.
View 16 Replies
View Related
Jun 28, 2011
I bought this router (DIR-655) some time earlier this year, so it hasn't even been half a year that I've owned the thing. I set it up in the small duplex I was sharing with my sister and it worked quite well. Actually... for the first 45 minutes I was freaking out because I was getting practically no signal, then I realized I had forgotten to screw in the antennas... but that little anecdote aside, it worked fine.
I've since moved into a new place. I got a new modem, still on Videotron, I just upped the speed from 7 MB/sec to 15 MB/sec. Before setting up the router I inserted the CD that came with it and followed the instructions therein... things seemed fine, except that he automatically used the same network name that I used at my last place... almost like he was stuck on it. I couldn't figure out how to create a fresh new network. But I shrugged it off and continued, entering my own password and everything else.
Now, at the end he gave me 4 pieces of information,
A router password. A network name (SSID), this is the one who's name was stuck to the old one. A network security type, I went for Most secure(WPA) And the network security key, this was a randomly generated alphanumeric code of some sort.
I copied this in two different ways and the installation wizard automatically saved me a copy onto the desktop, so I know for certain I got the passwords right. I pulled out my iPad later, saw the network, a good strong signal, and tried to connect except it's not accepting my password. The password I triple-saved and checked without a shadow of a doubt. On a whim I tried to use the Security Key, and that seemed to connect for some reason, but it is considerably slower than it was at my last place.
The modem isn't to blame (it's running on double the speed now) and the signal strength is good. It's just that something gone weird with the password, and it feels very slow. Even if it wasn't slow, I would really like to know why none of my wifi devices are accepting the password I assigned.
And I used that http://192.168.0.1/ trick to look into the router settings from my computer. I changed the network password into something new. And still none of the devices will connect, they keep telling me it's the wrong password. I am only able to connect through the Security Key and I don't like that! I tried to contact D-Link's technical support the other day, but it drew on for so long my cellphone actually ran out of minutes.
Short Version: None of my wifi devices are accepting the password I gave during the setup and I don't know why!
I'm running a 64-bit Windows 7 on 1-year old dual-core desktop computer.
View 4 Replies
View Related
Jan 4, 2012
shows computer cant receive enough packets but there is strong internet signal
View 1 Replies
View Related
Oct 30, 2012
I am using Xirrus WiFi inspector to survey the signal in y house and I notice a very strong signal at 160dBmMy home signal is in the region of -60 dBm so I am surprised to see such a strong signal at 160I have attached a screen shot so you can see BTOpenzone and BTHomeHub-WM9R with a high power.
View 3 Replies
View Related
Jan 16, 2011
I have a Linksys N Router connected to a Windows 7 computer. My wired connection through Comcast is an average of 25 Mbps. In the bedroom above me I have another computer with a Linksys N Adapter on Windows Vista. I am receiving a strong WiFi signal on an average of 240 Mbps. However, my internet downstream is less than 1 Mbps and the upload is over 3 Mbps. I've updated the router's firmware and reset it twice. I've also tried changing the channels and switching to broadcasting "N" only. Linksys won't facilitate because it's out of warranty.
View 3 Replies
View Related
May 31, 2011
Im using a Sony vaio laptop with windows vista. My Internet used to work perfectly and suddenly today my wireless will connect but I can't use the Internet. My iPhone and my aunts laptop can connect and work fine, it's just my laptop that has the problem. I've tried a system restore and a few other things but nothing seems to work
View 1 Replies
View Related
Jun 13, 2012
A few months back, my computer stopped connecting to networks. Through some process or another, I ended up "fixing" it by manually inserting the ipv4 settings. Apparently that only allows it to connect to my router though, as public wi fi won't work for it. If I leave the ipv4 settings set to automatically obtain information, the computer won't connect to the network. It will stay on the "identifying network" part indefinitely. In addition, I can't connect through the modem directly either, manual settings or not.
Here is the ipconfig while ipv4 is in auto-obtain
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home
Primary Dns Suffix . . . . . . . :
[Code].....
View 14 Replies
View Related
Jun 16, 2013
I am using the Vostro 3360 with win 7, I did used the hotspot station software accomplish with the WiFi driver before and worked fine. However, the hotspot is not working as the ipv4 is showing 'no internet connect'. And my iPhone cannot connect it too.
View 1 Replies
View Related
Oct 28, 2012
I currently have a 20MB down and 2MB internet. I have a Cisco Linksys E4200 with Firmware Version 1.0.05. We have a two bedroom apartment, one of the bedrooms is our office which is by the front door. We have the wireless router and our modem in the office. We have an apple TV in our living room that is connected to the wireless internet. Every time we get random times where the video output is very pixely and seems we are streaming shows/movies on a 56k modem.
View 1 Replies
View Related
May 31, 2012
I have been having some trouble lately with my internet since I have been home from college. I have no problem connected to my router wirelessly, and I always have a strong connect seeing as I am no more than 15 feet from the router. The problem arises sporadically for different intervals. One second I will be browsing the internet with no problem, and the next second I am unable to load any pages.
I was just in a Skype conversation with one of my friends and had a perfect connection with them. I was on twitter at the same time, when suddenly the pages stopped loading. The weird thing is, my connect was still strong while video chatting and it did not cut out. Why my web pages will not load while I still apparently have a strong connection.
View 1 Replies
View Related
Mar 27, 2011
I have two desktop computers upstairs.The main pc has the Linksys G Router and the other pc is wireless with a network adapter. All works fine here.Downstairs and on the other side of the house, I use my laptop which is wireless to the network. I also have a 46" hidef tv hooked up to a blu ray player and also connected to the network with a wireless adapter. I use Netflix to stream movies and seem to be having a problem with the signal in this room, both on the tv and my laptop. I sometimes only have 2 bars on my laptop and frequently get disconnected to the internet. When I am streaming movies or tv series, I get frequent stops and starts.
I am guessing that the signal is just not strong enough to reach this far from the router. Would switching to an N router be better for streaming? Would another G router downstairs solve my problem?
View 4 Replies
View Related
Oct 4, 2011
got a strong signal but can't connect to net, on a hp g60, after restoring factory setting
View 2 Replies
View Related
Feb 20, 2013
I am trying to brainstorm some ideas for the best wireless set up in a house that is 2 stories and 8500 SQ Feet. The house is wired with ethernet jacks.
Option 1. ASUS RT-N66U and Hawking Hi-Gain HWREN1
Option 2. Two Apple Airport Extreme's at either end of the house.
Option 3. Asus RT-N66U and Linksys WRT54G (DD-WRT Firmware).
What about the placement of the equipment? Should there be one router/access point on each floor or just two at either end of the house.
View 10 Replies
View Related
Sep 5, 2011
I mostly use my computer in my house, so I am not sure if it is a network problem, or something is wrong with my laptop, but I am having a lot of trouble maintaining a constant connection lately. Often times, I try to load a page and it says "connection reset" or whatever.I have a Dell Studio laptop with an Intel WiFi Link 5100 AGN wireless card. I am using the Broadcom Netlink driver along with Microsoft Miniport Adapter (all of this info came from my Device Manager). I'm running Windows 7 Home Premium 64-bit, 4GB RAM, Intel Core 2 Duo T6500 2.10 GHz, Service Pack 1.
View 10 Replies
View Related
Sep 19, 2011
I have 2 laptops, a DELL (windows XP home) and a Toshiba (windows 7).i suddenly couldn't get online with my Toshiba a week ago. Looks like I'm connected, but just can't send out. I changed to the DELL and all was fine for days, then I suddenly couldn't send out for a website with this, either. My connection shows strong, and can receive, but can't send out. This is a secure network (supposedly). I've rebooted, and have internet phone that works, so it's not the modem.
View 5 Replies
View Related
Sep 3, 2012
I have just purchased a WAG320N as I was told that I wouldn't have any connection issues with this model. The wireless connection upstairs is still not strong and I was wondering if there is anything I can do to fix this. I'm sick of the blue Ethernet cord running up the stairs connected to my son's XBox.
View 1 Replies
View Related
Mar 2, 2011
i bought a second hand acer one net book for my daughters birthday in a couple of weeks when i first tried it it work i could go on the net, now it wont says can't find server. connection strength is strong 100% system is running ubuntu.
View 1 Replies
View Related
Feb 14, 2012
I have one WLC 4402 & arround 29 Access point (1130) in our enterprise network. Wireless users LAN segment is diffrent from wired users.Wireless users like Laptop users, Mobile users & ipad users which are connetced with this wireless & using enterprise network.
Presently we are using WEP mode for security key. This WEP key are week & can be cracked easily. so security point of view i want to put strong encription mode.Presently i do not have any radius server.I found there are some modes are available Like WPA, WPA2 with PSK etc.
will there any problem with wireless users to access application after changing the mode? Which mode will be stronger & could not be crack. Could we achieve without radius server or not?
View 24 Replies
View Related
Jan 1, 2011
I have a Linksys wireless-G connected to my main computer and modem. We live in an extremely long house and I am attempting to connect a Belkin wireless-G router so that the signal is stronger on the other side of the house.
View 1 Replies
View Related
Oct 31, 2011
How possible is it to use a linksys cable modem cm100 with a strong srt4669x decoder to browse the internet?
View 4 Replies
View Related
Apr 15, 2012
I have a question about a netmask.How many netmask are there for IPV4?
View 5 Replies
View Related
Dec 6, 2011
Laptop got a virus and I used system restore. When the computer came back up, it would not connect to the internet.It is a wireless signal and the computer recognizes the signal is there, but it won't connect. The connection box says "Connections are available". It also says "Not connected" and "Limited access"
View 1 Replies
View Related
Aug 5, 2011
I have full wireless signal but I cannot pull up any webpages...it says cannot find server
View 1 Replies
View Related
Apr 9, 2012
how to re-connect my home wireless signal to my computer. The wireless signal is strong and the other computers in my house will connect with no issues. My computer connected with no problems to my wireless signal at work. I am running Windows 7 Home Premium on a Lenovo Idea Pad Win7 PC. The computer was connecting yesterday and then was shut down. The next time I got on, ,it wouldn't connect. I've tried re-establishing the network as a new network, but it says the network already exists. The profile is the same as our other computers and nothing has been changed there. When I disconnect from the wireless signal and ask to re-connect it says that the it is trying to connect, but can't make the connection. I'm looking for any way to re-build the profile so it will connect and work again.
View 9 Replies
View Related
May 23, 2011
My 24" iMac has been running off airport extreme wireless Internet for a few months flawlessly. All of a sudden one day our power goes out.. No problem, reset the system: should be fine. Not the case. Now my iMac can connect to the router but the signal is very weak almost useless and sometimes it won't connect at all. I've tried everything... Diagnostics say it's fine but then other times it says no IP address. Other routers work fine though. And the other computers I'm the building all have perfect connection... What do I try?
View 4 Replies
View Related
Oct 23, 2011
laptop says its picked up the signal from my router with good connection but still can get on the internet
View 14 Replies
View Related
Jun 17, 2011
i have installed a belkin d wireless card on to a P.C it shows full single and picks up other networks in area but it will not let me connect i have 2 wired P.C's running and a wireless laptop all running fine.i have reset router with no luck uninstalled card and reinstalled used software that came with card and downloaded most recent driver's alos i have installed software that came from ISP(SKY). P.C is running XP ant ideas what i can try next. i have lso installed card on to another P.C and it worked OK
View 2 Replies
View Related
Dec 27, 2011
I've had a D-Link DGL-4300 for the past four years now (at least) and in the past month, the WiFi signal it sends out just isn't 'good'. What I mean is, the first time this happened in November, one day all the WiFi enabled devices in my home were connecting just fine. Then quite literally the next day, each device detected a signal in the area, yet they simply couldn't connect. I've refreshed each device (iPhone, laptops, consoles) yet they cannot actually connect to the network even though they pick up the signal.
At first I reset the router and that seemed to work, but only for a day or two before the problem started up again. So then I upgraded to the last (and latest) firmware D-Link has on their site and it looked like the problem was solved for good. But unfortunately, this has started again in the last couple of days. D-Link doesn't provide any tech support for my router because it was discontinued in 2009 so I'm stuck.
View 8 Replies
View Related
Aug 15, 2012
I understand you can't assign an IPv4 Address to a "port". But here's my issue. I have two network cables attached to a managed switch, the location of the two cables are very important. Two computers attached to the said cables.I would like to communicate with one of the computers on PORT 1 and PORT 2, regardless of what computer is plugged into them. They get there IP's via DHCP, and a static IP wont work - as the computer plugged into PORT 1 or 2 may be different.So. I have two ports on the switch that I always want to communicate with the computer on the other end. But I don't (will not) always know the IP address of the computer(s) connected.
View 12 Replies
View Related
