My 24" iMac has been running off airport extreme wireless Internet for a few months flawlessly. All of a sudden one day our power goes out.. No problem, reset the system: should be fine. Not the case. Now my iMac can connect to the router but the signal is very weak almost useless and sometimes it won't connect at all. I've tried everything... Diagnostics say it's fine but then other times it says no IP address. Other routers work fine though. And the other computers I'm the building all have perfect connection... What do I try?
My wireless network signal is great on the first floor, but is weak on the second floor. I have tried different antennas and various locations for the antennas, but with little improvement. I prefer not to purchase signal amplifier. I have a second identical router. Can it be connected to the current router (LAN output) and by way of a cat5 cable, placed on the second floor to boost the second floor wireless signal?
Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost.
I just bought new Dell Inspiron n4050 Laptop " Dell Wireless 1702 802.11b/g/n"the wireless signal tooooo weak near the router (less than 10 cm ) !! and i have dell inspiron n5010 and the signal is too strong !
idk if that hardware problem or soft !the driver software is R302726
I've typed this question 4 times and keep losing signal so sorry if it appears multiple times, i have moved rooms and my laptop, toshiba satellite is now getting very weak signal. i bought a netgear usb adapter but it doesnt solve the problem much.
I bought TP-link wireless repeaters which i have failed trying to setup to an eircom zyxel dsl modem (ISP provided modem)i set it up as a universal repeater and had it auto latch on to the eircom modem but it just doesnt seem to boost the signal.i have turned all encryption and this doesnt work either. I have setup this situation using a netgear dsl modem and a netgear wireless router which if i remember i made a mac bridge, and it works great..am i wasting my time trying to get a TP-link talking to a cheap isp modem? i was reading an article somebody wrote that was doing the same thing yet the modem wasnt the same as mine, they said they got it working using WDS...and that the tp-link doesnt know about WDS and you need to use telnet to change settings on the tp-link looked a real hassle anyway.
I have tested each antenna separately. With each antenna attached one at a time the left and right antenna is giving me -20 signal. The center is only giving me -65 signal. Is this a problem with the router or normal? I noticed that the center pin is pushed in more then the left and right. Don't know if that is the cause.
I currently have a WAP4410N connected to an ethernet switch and the signal is very weak when attempting to connect to the AP from 4 rooms away. The structure is all block and the signal does not do well between the solid walls. I would like to roam from room to room on the same SSID. how to have the second WAP4410N repeat the original signal and reaplify it from the first WAP to solve this issue. Also, I cannot connect the second WAP to the ethernet switch it must be wireless.
A while ago I replaced my wireless card, and the new one get's considerably weaker signal strength and drops out periodically. I'm sure the problem is with the card itself (or its firmware). It not only get's weak signal strength from my router, but every surrounding network, and sometimes can't detect any networks for a few minutes. I've used several other wi-fi devices in the same spot where this system is sitting and they all get excellent signal strength.I've already tried changing channels on my router and re-installing drivers. Neither has any effect.The card in question is a TP-Link TL-WN951N.
I have been using a Magnavox 5130 BlueRay Player for a several years. Recently, over the last 4 to 6 months, we have experienced connectivity issues with Netflix. My router is on floor 2 in my office, and the signal strength is strong throughout the house. The Wii with Netflix is in the basement, and it never has a connectivity problem; two laptops are used throughout the three levels with no connectivity problems. So why does the wireless connectivity on the blue ray player suffer? It shows a weak signal, yet when I place my laptop next to it, it shows 5 out of 5 signal strength.I thought maybe there was something in the entertainment center that was perhaps interfering with the signal, so I moved it outside and on top of the entertainment center; no fix.
I used BT previously without any problems but now use Orange and now using the Internet downstairs is useless(weird flat configuration). The router is upstairs, next to TV(same location as the BT router). I dont know why the wireless Internet signal has become very weak. The only way I can use the Internet if I sit a few feet from the router. Even then, streaming videos on youtube still takes a while compared to BT. This affects all devices using wireless connection - even my Iphone is useless when used downstairs.
Signal interferance/ hacking? Router? Wireless adapter is up to date.
I am researching power adapters versus range extenders to bring the best signal to a new home theater so I can stream Netflix. I don't do much else (gaming etc...) and am not a tech person. I just want to enjoy movies in an area of my house that gets little or no signal. Didi I waste my money buying smart? Can I still do an ethernet connection off the power adapter? Should I put another router there instead--- off the adapter- so I can use the theaters wifi?
We have cable internet through a wireless router. It seems to be the case that after we have had a router for about a year, my wife begins having trouble with her internet connection; slow speed, no connection, weak signal, etc. Resetting the router and cable modem will fix the problem, but the fix is only for a short time (an hour or a day). We purchase and install a new router, and everything is fine for about a year, then the problems re-emerge.I can't believe that a router "wears out" after a year or so, but that is certainly how it appears.My wife has a Toshiba laptop running Windows 7, I have a Mac, and our son has a Samsung with WIN 7. I don't experience these problems, and my son does not to the extent my wife does. There is obviously something going on with the Toshiba or its interface with the router, but rebooting the computer doesn't have any effect.
I have a DIR-825 in my basement at one end of the house and it works great. My problem is the signal strength is a little weak on the main floor at the other end of the house. I would like to add a second access point to cover that end of the house. Do I need to get another DIR-825 and wire it to the original or is there another option? I obviously don't need all the features of the DIR-825 for the 2nd AP, but I cant find a less expensive option that will still allow me to use both bands.
I had an XP machine using a wired connection with a Linksys WRT54GS 2.4GHz router. The only things connecting to it wireless were my wii and my PS3 which were in the next room, less than 15feet away. I purchased a Windows 7 machine for my wife for Christmas, and gave the XP machine to my kids. I moved the modem and router into the kids playroom, and set the Windows 7 machine up for wireless. Now the router is at one end of the house, and the 7 machine is about 45 feet away. The signal strength was never an issue until last week, and now the PS3 and the Win7 machine constantly have weak signal or no signal. I don't know a whole lot about networking. I am willing to move the router and modem to a central location as a last resort, but would like to keep them with the XP machine for our kids to use.
My SURF N300 router makes my internet signal very weak, 1/10 of what was contracted but it works perfectly with the cable connected directly to the computer, how can I configure it to work properly?
I have a Belkin N300 Dual-Band Wi-Fi Range Extender but the signal light is always amber and I have difficulty connecting to the N300 wi-fi. Can I use a wired Ethernet cable to connect to it rather than it picking up the existing weak Wi-Fi signal?
I am trying to setup two Cisco 1310 bridges (AIR-BR1310G-A-K9-R) for connectivity between two buildings. No external antennas have been setup yet and I am just setting the basic configuration.One is running c1310-k9w7-mx.123-8.JEA3, the other c1310-k9w7-mx.123-7.JA1,setup as a root-bridge, the other as a non-root bridge.However, even after disabling authentication and encryption, both units are still not talking to each other.Maybe a second set of eyes can see an issue?
I have a Linksys E1000 router. The macbook is getting great signal even out in the yard. The PC running Windows 7 and using an AE1000 wireless adapter is only getting 2 bars out of 5. I don't think there's any interference. I can't figure out why the signal strength is so poor.
in my company we have 40 cisco aironet 1100 without controller, the signal is good with laptops but is too weak with the iphone's ipads and blackberry.
First off, using a iMac Laptop. As I've noticed no one's posted with that yet.Ok. Purchased the DIR-601. I have set up the Admin. Created the Wireless Network (As far as I'm aware) with a WPA-Personal. I think in might be that I need to connect via Static IP. I have it set for Dynamic IP.I can use internet via Ethernet but as soon as I try to pick the nework I created. It tells me Connection was Timed out!
need to find SSID from my network security key and mac address filter - active/disable DHCP. trying to connect EPSON WF610 WiFi to my imac in a home network?
I am currently having a problem connecting to the internet on my desktop connection. It is a wired connection from the modem straight to my desktop's ethernet port.It has been fine for a long time until today where it is suddenly unable to connect to anything internet-related at all or takes a long time to load even half of the page.My desktop is running on windows 7 and I was using avast antivirus until i tried uninstalling it in an attempt to fix the issue but to no avail.I am able to use the cmd and ping to other websites but the problem is, all of them have a latency ranging from 500-1000ms, even websites that are local to me.I have tested the connection on my laptop and it seems to work properly without all the problem stated. [code]
I have a WRT120n that keeps disconnecting my iMac. I have another PC conected with a wire to the wrt120n and never get's disconected however my iMac keeps disconecting and I have to reconect, this happens like every hour.
I've got my network up and running but the router doesn't see my USB printer. Using the Linksys Smart Wi-Fi software to find USB Devices none show up. Nor does the 'refresh' bring up my printer.
I have a problem te access e4200 with web access on a iMac with Lion 10.7. I try to connect with standard Safari.With 192.168.1.1. it won't open, if I look voor IP address it should be 192.168.0.1. now the login screen opens but now I can't login with clean name en password "admin" it gives an error.I also can't install Ciso Connect from CD, it gives a error not right version!.Is there anyone that use iMac with E4200 and Sonos zone player?
I set up my new E2500 last week, and it works fantastic with every device (iPad, 2 iPhones, iMac, DLink usb, ...) EXCEPT my iMac. That connects, but loses the connection very frequently (say at least every half hour) and I need to turn wifi off and on to get it to reconnect.
I've ensured that the iMac has all system updates, and I've checked that the E2500 is the latest firmware.
I've reverted to my old WRT54G for now, I'll have to return the E2500 if it won't work consistently with the iMac.
I have a problem with my new router. I connected't my iMac (27" 2010) and NAS Synology 1511. My problem is the slow connection between mac and router - only 100Mbit (ethernet port on mac is 1Gbit), strange thing... my NAS have 1Gbit with no problem, and the mac is not. I trying manual configure - forcing speed to 1Gbit, but then is no connection at all. I'm also trying changing wires, but no change. Im buying special ethernet cable cat 6 - also no change. Changing ports on router - result the same.
So I just got this router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
My room Desktop Wifi: Download was 0.50 mbs Upload: 3.6
My laptop right next to Router: Download 19.87 mbs Upload: 3.5
My room Desktop Neighbors Wifi: Download was 17.3 mbs Upload was 3.32.
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?
I got Fios installed this week. Router is the Actiontec MI424, it sits int he living room. I ran a speed test of the wifi on my laptop in the living room, and the internet speeds were great. Here's my problem. I'm in a 2 br condo, not a huge place maybe like 1200 Sq feet, same floor. Wifi is awesome in the living room, but in the bedroom it hangs. I still have a signal, varying for low to good, but it takes forever to open a web page, to the point where you can't use the internet. Bedroom is just down the hall.I called Verizon. They told me they can only guarantee the wifi signal 10 feet from the router, after that no promises. My frustration is that with my previous provider, which was giving me a slower internet connection, my wifi in the bedroom was fine and the router was in the exact same spot. Of course I used my own router? I know there are instructions on connecting my old router to the fios one and using my old router for wifi.
