Cisco Wireless :: Weak Signal For WAP4410N?
Sep 14, 2011
I currently have a WAP4410N connected to an ethernet switch and the signal is very weak when attempting to connect to the AP from 4 rooms away. The structure is all block and the signal does not do well between the solid walls. I would like to roam from room to room on the same SSID. how to have the second WAP4410N repeat the original signal and reaplify it from the first WAP to solve this issue. Also, I cannot connect the second WAP to the ethernet switch it must be wireless.
View 1 Replies
ADVERTISEMENT
Aug 5, 2012
I have a Verizon router with biltin wireless. I want to use my Apple Extreme for my home network
View 1 Replies
View Related
Feb 20, 2011
I've typed this question 4 times and keep losing signal so sorry if it appears multiple times, i have moved rooms and my laptop, toshiba satellite is now getting very weak signal. i bought a netgear usb adapter but it doesnt solve the problem much.
View 9 Replies
View Related
Apr 24, 2012
A while ago I replaced my wireless card, and the new one get's considerably weaker signal strength and drops out periodically. I'm sure the problem is with the card itself (or its firmware). It not only get's weak signal strength from my router, but every surrounding network, and sometimes can't detect any networks for a few minutes. I've used several other wi-fi devices in the same spot where this system is sitting and they all get excellent signal strength.I've already tried changing channels on my router and re-installing drivers. Neither has any effect.The card in question is a TP-Link TL-WN951N.
View 19 Replies
View Related
Dec 2, 2011
I used BT previously without any problems but now use Orange and now using the Internet downstairs is useless(weird flat configuration). The router is upstairs, next to TV(same location as the BT router). I dont know why the wireless Internet signal has become very weak. The only way I can use the Internet if I sit a few feet from the router. Even then, streaming videos on youtube still takes a while compared to BT. This affects all devices using wireless connection - even my Iphone is useless when used downstairs.
Signal interferance/ hacking? Router? Wireless adapter is up to date.
View 12 Replies
View Related
Dec 20, 2011
My wireless network signal is great on the first floor, but is weak on the second floor. I have tried different antennas and various locations for the antennas, but with little improvement. I prefer not to purchase signal amplifier. I have a second identical router. Can it be connected to the current router (LAN output) and by way of a cat5 cable, placed on the second floor to boost the second floor wireless signal?
View 8 Replies
View Related
Jan 18, 2011
I had an XP machine using a wired connection with a Linksys WRT54GS 2.4GHz router. The only things connecting to it wireless were my wii and my PS3 which were in the next room, less than 15feet away. I purchased a Windows 7 machine for my wife for Christmas, and gave the XP machine to my kids. I moved the modem and router into the kids playroom, and set the Windows 7 machine up for wireless. Now the router is at one end of the house, and the 7 machine is about 45 feet away. The signal strength was never an issue until last week, and now the PS3 and the Win7 machine constantly have weak signal or no signal. I don't know a whole lot about networking. I am willing to move the router and modem to a central location as a last resort, but would like to keep them with the XP machine for our kids to use.
View 6 Replies
View Related
Jul 20, 2011
Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost.
View 2 Replies
View Related
Mar 31, 2012
I just bought new Dell Inspiron n4050 Laptop " Dell Wireless 1702 802.11b/g/n"the wireless signal tooooo weak near the router (less than 10 cm ) !! and i have dell inspiron n5010 and the signal is too strong !
idk if that hardware problem or soft !the driver software is R302726
View 2 Replies
View Related
Jul 21, 2010
I have a Linksys E1000 router. The macbook is getting great signal even out in the yard. The PC running Windows 7 and using an AE1000 wireless adapter is only getting 2 bars out of 5. I don't think there's any interference. I can't figure out why the signal strength is so poor.
View 5 Replies
View Related
Apr 11, 2012
in my company we have 40 cisco aironet 1100 without controller, the signal is good with laptops but is too weak with the iphone's ipads and blackberry.
View 12 Replies
View Related
May 23, 2011
My 24" iMac has been running off airport extreme wireless Internet for a few months flawlessly. All of a sudden one day our power goes out.. No problem, reset the system: should be fine. Not the case. Now my iMac can connect to the router but the signal is very weak almost useless and sometimes it won't connect at all. I've tried everything... Diagnostics say it's fine but then other times it says no IP address. Other routers work fine though. And the other computers I'm the building all have perfect connection... What do I try?
View 4 Replies
View Related
Dec 13, 2011
I bought TP-link wireless repeaters which i have failed trying to setup to an eircom zyxel dsl modem (ISP provided modem)i set it up as a universal repeater and had it auto latch on to the eircom modem but it just doesnt seem to boost the signal.i have turned all encryption and this doesnt work either. I have setup this situation using a netgear dsl modem and a netgear wireless router which if i remember i made a mac bridge, and it works great..am i wasting my time trying to get a TP-link talking to a cheap isp modem? i was reading an article somebody wrote that was doing the same thing yet the modem wasnt the same as mine, they said they got it working using WDS...and that the tp-link doesnt know about WDS and you need to use telnet to change settings on the tp-link looked a real hassle anyway.
View 3 Replies
View Related
Nov 12, 2012
I have tested each antenna separately. With each antenna attached one at a time the left and right antenna is giving me -20 signal. The center is only giving me -65 signal. Is this a problem with the router or normal? I noticed that the center pin is pushed in more then the left and right. Don't know if that is the cause.
View 14 Replies
View Related
Jun 2, 2011
it will not connect to the wireless signal and troubleshooter shows "weak signal" but the signal indicator shows full bars
View 2 Replies
View Related
Apr 27, 2013
I have been using a Magnavox 5130 BlueRay Player for a several years. Recently, over the last 4 to 6 months, we have experienced connectivity issues with Netflix. My router is on floor 2 in my office, and the signal strength is strong throughout the house. The Wii with Netflix is in the basement, and it never has a connectivity problem; two laptops are used throughout the three levels with no connectivity problems. So why does the wireless connectivity on the blue ray player suffer? It shows a weak signal, yet when I place my laptop next to it, it shows 5 out of 5 signal strength.I thought maybe there was something in the entertainment center that was perhaps interfering with the signal, so I moved it outside and on top of the entertainment center; no fix.
View 3 Replies
View Related
Nov 14, 2012
I am researching power adapters versus range extenders to bring the best signal to a new home theater so I can stream Netflix. I don't do much else (gaming etc...) and am not a tech person. I just want to enjoy movies in an area of my house that gets little or no signal. Didi I waste my money buying smart? Can I still do an ethernet connection off the power adapter? Should I put another router there instead--- off the adapter- so I can use the theaters wifi?
View 1 Replies
View Related
Aug 31, 2011
We have cable internet through a wireless router. It seems to be the case that after we have had a router for about a year, my wife begins having trouble with her internet connection; slow speed, no connection, weak signal, etc. Resetting the router and cable modem will fix the problem, but the fix is only for a short time (an hour or a day). We purchase and install a new router, and everything is fine for about a year, then the problems re-emerge.I can't believe that a router "wears out" after a year or so, but that is certainly how it appears.My wife has a Toshiba laptop running Windows 7, I have a Mac, and our son has a Samsung with WIN 7. I don't experience these problems, and my son does not to the extent my wife does. There is obviously something going on with the Toshiba or its interface with the router, but rebooting the computer doesn't have any effect.
View 1 Replies
View Related
Jan 5, 2012
I have a DIR-825 in my basement at one end of the house and it works great. My problem is the signal strength is a little weak on the main floor at the other end of the house. I would like to add a second access point to cover that end of the house. Do I need to get another DIR-825 and wire it to the original or is there another option? I obviously don't need all the features of the DIR-825 for the 2nd AP, but I cant find a less expensive option that will still allow me to use both bands.
View 6 Replies
View Related
Apr 8, 2012
I am trying to setup two Cisco 1310 bridges (AIR-BR1310G-A-K9-R) for connectivity between two buildings. No external antennas have been setup yet and I am just setting the basic configuration.One is running c1310-k9w7-mx.123-8.JEA3, the other c1310-k9w7-mx.123-7.JA1,setup as a root-bridge, the other as a non-root bridge.However, even after disabling authentication and encryption, both units are still not talking to each other.Maybe a second set of eyes can see an issue?
View 7 Replies
View Related
Apr 30, 2013
My SURF N300 router makes my internet signal very weak, 1/10 of what was contracted but it works perfectly with the cable connected directly to the computer, how can I configure it to work properly?
View 1 Replies
View Related
Jun 10, 2013
I have a Belkin N300 Dual-Band Wi-Fi Range Extender but the signal light is always amber and I have difficulty connecting to the N300 wi-fi. Can I use a wired Ethernet cable to connect to it rather than it picking up the existing weak Wi-Fi signal?
View 1 Replies
View Related
Jan 17, 2012
we purchased 8 WAP4410N access points to cover our entire school with wireless internet. 2 of those could not have access to a wired network accesspoint, so we wanted those to repeat the signal of 2 others. The ones who are to provide the signal are set up as access points, with the option to allow the signal to be repeated enabled. The mac adress of the other access point is provided, and the channel is set to 6. The 'repeat' 4410N ones are set up as wireless WDS Repeater, with the mac adress of the remote access point entered through the site survey. The channel is also set to 6.
When I connect with the 'repeaters' however, I only get limited access, cannot get on the internet, and I cannot change the network settings in Windows 7 from 'public' to 'business'.
View 3 Replies
View Related
Jun 12, 2013
belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies
View Related
Jan 16, 2011
Purchase the unit from Amazon and installed it in December. Device worked perfectly with excellent coverage for approx 14 days then I got a call from the location stating that they where not seeing the SSID. Power cycled the unit and still nothing. The only way I could get a signal is if I held the wireless device within one foot of the WAP4410N and even then I would only get 1 bar of signal strength.
View 2 Replies
View Related
Mar 17, 2010
First here is our network breakdown
8 Windows 2008 Servers - UN effected
5 Windows 2003 Servers - effected with dupe IP's
We have AP - A, B and C all configured static and outside of our DHCP scope
A - 104.240
B - 104.241
C - 104.242
WAP A is setup to allow the Mac's of A and B to repeat its signal. The issue starts about 1-2 minutes after I set B and C to client/repeater and select A in site survey then save the settings. Obviously its weird that only our 2003 servers are getting this error.
The system detected an address conflict for IP address 192.168.105.201 with the system having network hardware address *MAC ADDRESS OF ROUTER A*. Network operations on this system may be disrupted as a result.
View 1 Replies
View Related
Apr 18, 2012
Im having problems with setting up my cisco WAP4410N as a repeater to extend the signal of cisco E2500.It works fine when there is no password to be set on both devices. But when either one of these devices had beenset a password on it, then WAP4410N failed to extend the signal of E2500.
I tried steps as below:
1. Same password type in WAP4410N and E2500.
2. Different password type in WAP4410N and E2500.
3. Set password in WAP4410N ONLY.
4. Set password in E2500 ONLY.
All steps above makes WAP4410N fail to extend the signal range of E2500. WAP4410N successfully works as a repeater to extend the signal of E2500 when there is no password to be set on both devices.
View 2 Replies
View Related
Apr 30, 2011
I have the following equipment:
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3
I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable. About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed. The link is stable (I have had the best results with B/G). The problem is, I didn't buy the 2nd 4410N to run the G protocol. I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only. I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.
View 1 Replies
View Related
Oct 6, 2012
For my network the way it is setup is one building has the 2 main servers.simple wireless router and a few laptop that connect to it. a Wii and some other devices, all of them share media etc with no issue. Internet is not a problem either.One of the servers has a PCI wireless card and connects to another network.(network2)network 2 is able to share and play all the media off the service lets say 80% of the time.It also has a different internet provider and internet connection is not a problem but the wireless signal strength is low , (2 bars) or -55 to -82 it seams to jump around at.If you try to stream or play too much media it freezes on you. or if 2 devices on network 2 try to play something it freezes as well sometimes though when the signal is good -55 ish there is no issues.There is alot of wireless traffic in the area, i cant change that.and dont really want to buy a ranger extender or something $20 is what I have for parts if anything. If I were to put a 2nd wireless card in server 2 or Server 1 even. Also both the wireless router on network 2 and the pci card on server 2 are physically as close as hey can get.
View 6 Replies
View Related
Dec 7, 2011
So I just got this router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
My room Desktop Wifi:
Download was 0.50 mbs Upload: 3.6
My laptop right next to Router:
Download 19.87 mbs Upload: 3.5
My room Desktop Neighbors Wifi:
Download was 17.3 mbs Upload was 3.32.
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?
View 4 Replies
View Related
Dec 20, 2009
I bought the WMP600N because Linksys and Microsoft listed it as 'compatible' for Windows 7 x64. My experience:
- unstable and weak connection
- pings to websites like google.com drops, average: 1 out of 3
- low signal, on the same spot my three years old HP-laptop with 'a build in wireless card' has full signal strength in Windows 7
- it works well under Windows XP (32 bit)
I am convinced that drivers for the WMP600N are not ready for Window 7 x64. Linksys (or Ralink, which developed the chipset), release a proper driver for the WMP600N.
View 9 Replies
View Related
Jun 20, 2011
My laptop was able to give me full bars in my room now i dont even get 1 . i have to go right up to the router for full connections , and now i'm forced to be in a certain position in my room for a lousy 2 bars . I've confirmed it isnt my router. and i am positive i dont have external problems . I'm running windows 7 on a gateway LT32 netbook.
View 1 Replies
View Related
Nov 20, 2012
1、the router power led's emitting light very weak ,
2、client pc cannot get ip from connected router
these error perhaps happened after a plug power jack action. Dc-dc chip is ME5513,the voltage on its pin4 is about 11.94V,and the voltage on following electrolytic capacitor is 3.3V,its seem normal.
View 1 Replies
View Related
