Fios Wifi Weak 20 Feet From Actiontec Mi424 Router - Options?

Aug 17, 2012

I got Fios installed this week. Router is the Actiontec MI424, it sits int he living room. I ran a speed test of the wifi on my laptop in the living room, and the internet speeds were great. Here's my problem. I'm in a 2 br condo, not a huge place maybe like 1200 Sq feet, same floor. Wifi is awesome in the living room, but in the bedroom it hangs. I still have a signal, varying for low to good, but it takes forever to open a web page, to the point where you can't use the internet. Bedroom is just down the hall.I called Verizon. They told me they can only guarantee the wifi signal 10 feet from the router, after that no promises. My frustration is that with my previous provider, which was giving me a slower internet connection, my wifi in the bedroom was fine and the router was in the exact same spot. Of course I used my own router? I know there are instructions on connecting my old router to the fios one and using my old router for wifi.

View 4 Replies


ADVERTISEMENT

NIM-100 / MI424-WR / Installing New Actiontec With Multiple Modems?

Aug 4, 2012

I have a problem with a new Actiontec modem from Verizon FIOS The past few years I've had two cable modems working fine for verizon fios. Both were the NIM-100 from Motorola.The second "slave" cable modem is connected via coax cable.I recently replaced the primary NIM-100 and the associated wireless router with the new Actiontec modem MI424-WR IN viewing the network connection via the Actiontect control panel, it shows the other slave modem connected via coax but claims that the status is "Cable Disconected"

View 3 Replies View Related

Linksys Wireless Router :: E1200 With Verizon Fios Actiontec?

Feb 8, 2012

I bought the Linksys E1200 for it's wireless N and the guest account. set up my new Linksys E1200 router to use for wireless N access rather that my Verizon Fios provided Actiontec (model M4124-WR Rev.C) which is only wireless G, and so that I can use the guest account. I have an ethernet cable running from one of the 4 ethernet ports on the E1200 to one of the 4 LAN ports on the Actiontec. I have the wireless turned off on the Actiontec, and have the E1200 set as 192.168.1.200.My wireless N signal seems to be working fine from the E1200, and I was able to turn on the guest account on the E1200 and "connect" to it on my iPhone 4, but then when I open Safari I can not connect to the internet.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G FIOS And Actiontec Modem

Dec 29, 2006

Just had Verizon FIOS  service installed.  It comes with an actiontec modem.  I would like to remove the actiontec modem and connect directly to my Linksys RT31P2 which is cascaded to my Linksys WRT54G.  I have tried just about every router setup config; all with no success.  How to be able to connect the FIOS directly to a linksys router.

View 3 Replies View Related

Protocols / Routing :: Can't Type Stock FIOS Router Actiontec MI424WR Password?

May 15, 2011

I'm using a stock FIOS router Actiontec MI424WR, and I'm trying to access the router settings at 192.168.1.1. I type in my username fine, but when I type the password, each keystroke gives me more than one digit. Even holding Ctrl adds one, and letting go removes three characters. I've never seen this happen before, and I've tried it on two computers and three different browsers. I see that people recommend hard-resetting the router, but I was wondering why this has happened

View 3 Replies View Related

Linksys Wireless Router :: EA6500 No Internet Connected To Verizon FIOS Actiontec Router

Jan 20, 2013

I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
 
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
 
I have reset my fios router as well as ea6500 to factory defaults multiple times.

View 9 Replies View Related

Cisco Switches :: SG300-10 / Setup Multiple Routed VLANs Going Back To FiOS Actiontec Router

Aug 13, 2011

I just received a new Cisco SG300-10 and am configuring it in Layer 3 mode.  I am trying to setup multiple routed VLANs going back to a FiOS Actiontec router.  My configuration is as follows.
 
Fios Router: 192.168.1.1
Assigning DHCP 192.168.1.2 through 100.
 SG300-10 has VLan 1 ip 192.168.1.5 used for Mgmt.
VLAN2 is 10.0.2.1
VLAN3 is 10.0.3.1.
 
I have a static route set on the fios router for both subnets setup as follows.
 
Destination 10.0.3.0 Gateway 192.168.1.5 Netmask 255.255.255.0 Metric 1
Destination 10.0.2.0 Gateway 192.168.1.5 Netmask 255.255.255.0 Metric 1
 
I have a laptop connected to Gi8 on the Cisco (Vlan 3) and statically assigned 10.0.3.3, with a gateway of 10.0.3.1.  DNS set to the fios router (192.168.1.1). 
 
Everything pretty much works EXCEPT, I cannot get out to the internet from either vlan.  Traffic routes between vlans/and the default subnet on the fios without issue.
 
When I ping out, DNS resolves, but will not go past the fios router.  Am I missing a setting somewhere?

View 3 Replies View Related

Wifi Router That Can Go 100 Feet?

Dec 29, 2012

Any router that can go up to atleast 100 ft i have no idea how what to look for when buying a router.

View 4 Replies View Related

Linksys Wireless Router :: E2000 Wifi Slows Down After 20 Feet

Jan 5, 2012

My WiFi is working, but only to about 20 feet then it slows down to almost nothing...

View 1 Replies View Related

Adding Second Wifi Router To Verizon Fios Mi424wr

Oct 23, 2012

I have a MI424WR for my Verizon Fios connection. The router is located downstairs, and I don't get Wifi in my bedroom upstairs. Is it possible to connect another WIFI router by ethernet to the MI424WR? Is there anyway where I can do it without the two router's wifi signals fighting each other? Is there a specific kind of router I should be looking for?

View 1 Replies View Related

Linksys Wireless Router :: E1000 Weak Wifi Signal

Jul 20, 2011

Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost.

View 2 Replies View Related

Linksys Wireless Router :: Unable To Access Wifi Options (wrt54gl)?

May 23, 2012

I own an AG214 ADSL2 router that I use for my desktop PC. I now however also have a WRT54GL for wireless connection. I  connected the WRT54GL to my AG214 via ethernet. Everything works fine, I have wifi and I can use it to connect to the internet. However when I go to my router (192.168.x.x)  I can't seem to be able to find a wireless tab to configure my wifi settings. The network right now is unsecure and has a default name (linksys). How do I access my wireless settings? When I access my router it does go to the AG214, do I need to access the WRT54GL? If so, how do I do that?

View 4 Replies View Related

Tp-link Repeating A Weak Wifi Signal

Dec 13, 2011

I bought TP-link wireless repeaters which i have failed trying to setup to an eircom zyxel dsl modem (ISP provided modem)i set it up as a universal repeater and had it auto latch on to the eircom modem but it just doesnt seem to boost the signal.i have turned all encryption and this doesnt work either. I have setup this situation using a netgear dsl modem and a netgear wireless router which if i remember i made a mac bridge, and it works great..am i wasting my time trying to get a TP-link talking to a cheap isp modem? i was reading an article somebody wrote that was doing the same thing yet the modem wasnt the same as mine, they said they got it working using WDS...and that the tp-link doesnt know about WDS and you need to use telnet to change settings on the tp-link looked a real hassle anyway.

View 3 Replies View Related

Use Wifi Booster To Boost Weak Signals In Network?

Feb 9, 2011

I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi.

For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.

View 1 Replies View Related

New Smart Home Theater But Weak Wifi Signal

Nov 14, 2012

I am researching power adapters versus range extenders to bring the best signal to a new home theater so I can stream Netflix. I don't do much else (gaming etc...) and am not a tech person. I just want to enjoy movies in an area of my house that gets little or no signal. Didi I waste my money buying smart? Can I still do an ethernet connection off the power adapter? Should I put another router there instead--- off the adapter- so I can use the theaters wifi?

View 1 Replies View Related

Home Network :: Using A Wifi Booster To Boost Weak Signals?

Feb 9, 2011

I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi. Is this possible in Windows 7 Home Preium?

For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.

View 1 Replies View Related

30 Feet From The Router - Camera Is Offline

Feb 17, 2012

the camera is about 30 feet from the router. Is it too far for the camera to be detected? After I mounted the camera at the front door, after connecting the camera to the electric power, I saw clearly the picture. But after I finished mounting, I could not see the picture anymore. On the computer, it was stated that the camera was offline.

View 1 Replies View Related

Linksys Wireless Router :: E1200 Bridge - Moved To New Location 150 Feet Away And It Will Not Work?

Aug 5, 2012

I was successful in configuring a new e1200 in bridge mode to extend my network. I did this with the routers side by side. In then moved the e1200 to a new location 150 feet away and it will not work. I previously had this working with an older linksys router. It will not deliver a Internet connection.

View 8 Replies View Related

Actiontec GT724WGR - Can't Access Router Settings

Jun 26, 2011

I bought an Actiontec GT724WGR. I downloaded the latest firmware and went to install it. When it finished, I got the confirmation box and it gave me the click okay to restart option. I clicked okay, and when the router power cycled, the Power light stayed amber. I can't manually reset the setting back to default with the reset button. I can't access the router settings.

View 1 Replies View Related

Actiontec V100H - A New Router Incompatible With Vista?

Sep 11, 2011

We recently moved to a place with included internet that was going through a wireless network. All of my devices connect fine, no problem (iPhone xbox and USB adapter) but the lady friends laptop wont connect. It recognizes the network, connects to the network after the password has been entered but will not "give out" any internet. Signal Strength is very good (router is maybe 20 feet from us). All the drivers for the wireless adapter in her laptop are up to date and it will connect to other networks, like at her mom's. This is a newer router and funny enough we actually used this exact model at our last place and it had no problems with this. After calling our landlords ISP they said that there may be a problem with the compatibility of her laptop (its only 3 years old and connects to other networks fine) with the router, yet it connected to the same model not 6 months ago.

People we are at wits end and I am . As my username states If I cant find a fix for this I will enjoy smashing this thing to bits.

FYI: the router is an Actiontec V100H

View 8 Replies View Related

Possible To Use Actiontec Router M1424wr As Modem For Faxes?

Feb 16, 2013

My new PC does not have internal modem card.I use Verizon FIOS Actiontec router #M1424-WR rev F. What do I have to do to use as modem for receiving and sending faxes? Do I now have to buy an external USB modem?

View 1 Replies View Related

Actiontec GT704WG - Capping All Computers On Router To Certain Speed

Feb 22, 2011

capping all of the computers on my router to a certain speed. I like to play games and the others like to buffer movies, is there a way I can cap all of ours so we can each get smooth internet use? Be it by program or through the router it would be great to get it setup and working. Router is Actiontec GT704WG and has 4 computers hooked up to it, will post other spec's if needed.

View 2 Replies View Related

Actiontec M1424WR Wireless Router - Setting Up Homegroup

Dec 18, 2012

I recently moved in with a friend, and we're having trouble setting up file sharing. His PC is connected directly (via ethernet cable) to an Actiontec M1424WR wireless router, which is broadcasting a WEP-secured wireless network. My PC is connected wirelessly (via an RNX-N180UBE usb adapter). Both machines are running Windows 7. Internet access is great. We tried to set up a homegroup, however, and are getting nothing but problems.He created a homegroup on his PC, gave me the password, and I joined on my PC. It said it joined and asked me what I wanted to share, but that's as far as we can get.

- On his PC, when he goes to the Homegroup page, it says "no other Homegroup computers are available."
- On my PC's Homegroup page, I see his computer name listed, and when I open it it shows libraries, but when I double click them it nothing happens
- He right-clicked his "downloads" folder and did "share with -> Homegroup;" I see it in my PC's Homegroup page but when I try to open it, the system thinks for a while before popping up a "cannot access" message
- I also shared a folder of mine to the Homegroup but, since he can't even see my PC, he can't see the folder
- I ran IPCONFIG on both machines; his machine's IP is 192.168.1.2; my machine's IP is 192.168.1.5
- When I ping his machine from my machine, I get "request timed out"
- When I ping my machine from his machine, I get replies.
- When I ping the router from my machine, I get replies.
- He has a printer. On my Homegroup page, it tells me that it has detected a new printer, but the "Install Now" button does nothing.

I've gone into Network and Sharing Center -> Advanced Sharing Settings and enabled "Allow Windows to manage homegroup connections." I did this on both machines.He runs a VPN on his machine. Thought that might be the problem, so we turned it off but nothing changed. I run both Hamachi and Tunngle on my machine. Disabled both of those but nothing changed.

View 2 Replies View Related

Linksys Wireless Router :: Will WRTU54G-TM Bridge With Actiontec?

Jan 27, 2012

I have a Verizon supplied actiontec g band router, and would like to place a WRTU54G-TM on the other side of the house to act as a repeater or a wireless bridge (?). I want stronger wireless at that other side of the house and beyond, and use cat5 to hook up some other devices.Can I bridge the actiontec and WRTU54G-TM together, or do they have to be the same brands?

View 1 Replies View Related

Add A Wireless Router To Verizon Fios?

Feb 20, 2013

How to hook up a seperate wireless router instead of using the fios router. I want to get a n-signal in my house. Would like an answer or a link to another thread.

View 1 Replies View Related

Using Linksys Instead Of Verizon Fios Router?

Apr 11, 2012

I tried connecting this on my own and it worked for hard wired Internet service but not for wireless service. Too many cables and boxes attached. I have a vz router, then some other box, and a battery back up.

View 2 Replies View Related

IMac Can Connect To Router But Signal Very Weak?

May 23, 2011

My 24" iMac has been running off airport extreme wireless Internet for a few months flawlessly. All of a sudden one day our power goes out.. No problem, reset the system: should be fine. Not the case. Now my iMac can connect to the router but the signal is very weak almost useless and sometimes it won't connect at all. I've tried everything... Diagnostics say it's fine but then other times it says no IP address. Other routers work fine though. And the other computers I'm the building all have perfect connection... What do I try?

View 4 Replies View Related

Find The Password Connected To IP Address On The Actiontec Router M1424wr?

Oct 1, 2012

HOW do I find the password connected to my IP address on the Actiontec router m1424wr?

View 1 Replies View Related

Security / Firewalls :: Temporarily Disable Actiontec PK5000 Router?

Mar 15, 2011

In order to get my wireless printer up and running I need to temporarily disable my actiontec PK5000 router.

View 11 Replies View Related

Linksys Wireless Router :: No Internet With WRT160N & GT701 Actiontec?

Oct 9, 2010

I had an old MS DSL1000 that was upgraded by Qwest to an Actiontec GT701 (not wireless) modem. If the GT701 is plugged directly into the PC, the internet works fine. If it is connected from the ethernet port into the WRT160N router, the LAN works but not the internet, even though the internet light is a solid green on the GT701. I've read about port forwarding and DMZ, but still not positive if I should do one or the other, much less on how to go about setting either of them up correctly.

View 9 Replies View Related

Weak Wireless Signal - Connecting Second Identical Router?

Dec 20, 2011

My wireless network signal is great on the first floor, but is weak on the second floor. I have tried different antennas and various locations for the antennas, but with little improvement. I prefer not to purchase signal amplifier. I have a second identical router. Can it be connected to the current router (LAN output) and by way of a cat5 cable, placed on the second floor to boost the second floor wireless signal?

View 8 Replies View Related

Linksys Wireless Router :: E1500 -Getting Weak Signals?

Dec 7, 2011

So I just got this router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
 
My room Desktop Wifi:
Download was 0.50 mbs Upload: 3.6
 
My laptop right next to Router:
Download 19.87 mbs Upload: 3.5
 
My room Desktop Neighbors Wifi:
Download was 17.3 mbs Upload was 3.32.
 
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?

View 4 Replies View Related

Linksys Wireless Router :: E4200 Replacing Gigabit FIOS Router?

Feb 3, 2013

I have that red gigabit router with the 150/65 service.  It connects via ethernet for internet and has a coax to transmit the guide data etc.So my idea was to just leave the Verizon router connected and on (with wi-fi off) so it could do the TV stuff and just plug my router into the ethernet wall port the Verizon guy installed.Not so easy of course, my E4200 will not recognize the ethernet from my ONT (I think that's what the device they put in my basement is called) and the internet doesn't work.  I have factory reset the router.The reason I am doing all this is because the wireless range of the e4200 at 2.4ghz is near unmatched and given my house, the actiontech cannot reach my room.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved