Able To Connect To Network But Weak / No Internet
Oct 29, 2012
I am currently having a problem connecting to the internet on my desktop connection. It is a wired connection from the modem straight to my desktop's ethernet port.It has been fine for a long time until today where it is suddenly unable to connect to anything internet-related at all or takes a long time to load even half of the page.My desktop is running on windows 7 and I was using avast antivirus until i tried uninstalling it in an attempt to fix the issue but to no avail.I am able to use the cmd and ping to other websites but the problem is, all of them have a latency ranging from 500-1000ms, even websites that are local to me.I have tested the connection on my laptop and it seems to work properly without all the problem stated. [code]
View 1 Replies
ADVERTISEMENT
May 23, 2011
My 24" iMac has been running off airport extreme wireless Internet for a few months flawlessly. All of a sudden one day our power goes out.. No problem, reset the system: should be fine. Not the case. Now my iMac can connect to the router but the signal is very weak almost useless and sometimes it won't connect at all. I've tried everything... Diagnostics say it's fine but then other times it says no IP address. Other routers work fine though. And the other computers I'm the building all have perfect connection... What do I try?
View 4 Replies
View Related
Aug 5, 2012
I have a Verizon router with biltin wireless. I want to use my Apple Extreme for my home network
View 1 Replies
View Related
Feb 9, 2011
I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi.
For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.
View 1 Replies
View Related
Nov 17, 2012
My ISP tested my connection and told me my signal is very weak. I can no longer play games online because I lag tremendously. I can't steam videos while someone else is using the internet either. Also I can't access it on wireless devices unless I am in view of the router. I'm not sure what caused my connection to suck butI have the essential plan from cox.com. When I test my connection on speedtest.com I average 75ms/ping, 3.25mbps/dwnld spd, and
View 2 Replies
View Related
Dec 2, 2011
I used BT previously without any problems but now use Orange and now using the Internet downstairs is useless(weird flat configuration). The router is upstairs, next to TV(same location as the BT router). I dont know why the wireless Internet signal has become very weak. The only way I can use the Internet if I sit a few feet from the router. Even then, streaming videos on youtube still takes a while compared to BT. This affects all devices using wireless connection - even my Iphone is useless when used downstairs.
Signal interferance/ hacking? Router? Wireless adapter is up to date.
View 12 Replies
View Related
Aug 31, 2011
We have cable internet through a wireless router. It seems to be the case that after we have had a router for about a year, my wife begins having trouble with her internet connection; slow speed, no connection, weak signal, etc. Resetting the router and cable modem will fix the problem, but the fix is only for a short time (an hour or a day). We purchase and install a new router, and everything is fine for about a year, then the problems re-emerge.I can't believe that a router "wears out" after a year or so, but that is certainly how it appears.My wife has a Toshiba laptop running Windows 7, I have a Mac, and our son has a Samsung with WIN 7. I don't experience these problems, and my son does not to the extent my wife does. There is obviously something going on with the Toshiba or its interface with the router, but rebooting the computer doesn't have any effect.
View 1 Replies
View Related
Feb 9, 2011
I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi. Is this possible in Windows 7 Home Preium?
For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.
View 1 Replies
View Related
Jan 18, 2011
I had an XP machine using a wired connection with a Linksys WRT54GS 2.4GHz router. The only things connecting to it wireless were my wii and my PS3 which were in the next room, less than 15feet away. I purchased a Windows 7 machine for my wife for Christmas, and gave the XP machine to my kids. I moved the modem and router into the kids playroom, and set the Windows 7 machine up for wireless. Now the router is at one end of the house, and the 7 machine is about 45 feet away. The signal strength was never an issue until last week, and now the PS3 and the Win7 machine constantly have weak signal or no signal. I don't know a whole lot about networking. I am willing to move the router and modem to a central location as a last resort, but would like to keep them with the XP machine for our kids to use.
View 6 Replies
View Related
Apr 30, 2013
My SURF N300 router makes my internet signal very weak, 1/10 of what was contracted but it works perfectly with the cable connected directly to the computer, how can I configure it to work properly?
View 1 Replies
View Related
Nov 23, 2012
Namely an Unidentified Network with no NETWORK access. Some information first, the NIC that Im using is the Realtek PCIe Family Controller, Ive updated the drivers, Ive uninstalled, Ive reinstalled. Ive basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, Im still not sure if I did this step correctly) Ive tried disabling IPV6, Ive tried adjusting my speedflux. The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day Ill boot up my computer and Ill have internet again. It should be noted that when I enable WIRELESS on my laptop, Im able to connect to the network, but when I enable wired, I am not able to.
Here is the ipconfig /all for when Im connected wirelessly and have a connection.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code]....
It should be noted that I am using powerline adapters for my connection, but as I said, this problem only recently started cropping up. I went fine for almost a week with no problems, then all of a sudden it started happening. Im still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet..
View 2 Replies
View Related
Nov 23, 2012
Recently I've been having some internet problems. Namely an Unidentified Network with no NETWORK access.the NIC that I'm using is the Realtek PCIe Family Controller, I've updated the drivers, I've uninstalled, I've reinstalled. I've basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, I'm still not sure if I did this step correctly) I've tried disabling IPV6, I've tried adjusting my speedflux, believe me I've tried just about everything, I don't have one blue link left when it comes to my google searches on fixing this problem.The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day I'll boot up my computer and I'll have internet again. It should be noted that when I enable WIRELESS on my laptop, I'm able to connect to the network, but when I enable wired, I am not able to.[code] I'm still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet.
View 2 Replies
View Related
Oct 6, 2012
For my network the way it is setup is one building has the 2 main servers.simple wireless router and a few laptop that connect to it. a Wii and some other devices, all of them share media etc with no issue. Internet is not a problem either.One of the servers has a PCI wireless card and connects to another network.(network2)network 2 is able to share and play all the media off the service lets say 80% of the time.It also has a different internet provider and internet connection is not a problem but the wireless signal strength is low , (2 bars) or -55 to -82 it seams to jump around at.If you try to stream or play too much media it freezes on you. or if 2 devices on network 2 try to play something it freezes as well sometimes though when the signal is good -55 ish there is no issues.There is alot of wireless traffic in the area, i cant change that.and dont really want to buy a ranger extender or something $20 is what I have for parts if anything. If I were to put a 2nd wireless card in server 2 or Server 1 even. Also both the wireless router on network 2 and the pci card on server 2 are physically as close as hey can get.
View 6 Replies
View Related
Feb 20, 2011
I've typed this question 4 times and keep losing signal so sorry if it appears multiple times, i have moved rooms and my laptop, toshiba satellite is now getting very weak signal. i bought a netgear usb adapter but it doesnt solve the problem much.
View 9 Replies
View Related
Dec 13, 2011
I bought TP-link wireless repeaters which i have failed trying to setup to an eircom zyxel dsl modem (ISP provided modem)i set it up as a universal repeater and had it auto latch on to the eircom modem but it just doesnt seem to boost the signal.i have turned all encryption and this doesnt work either. I have setup this situation using a netgear dsl modem and a netgear wireless router which if i remember i made a mac bridge, and it works great..am i wasting my time trying to get a TP-link talking to a cheap isp modem? i was reading an article somebody wrote that was doing the same thing yet the modem wasnt the same as mine, they said they got it working using WDS...and that the tp-link doesnt know about WDS and you need to use telnet to change settings on the tp-link looked a real hassle anyway.
View 3 Replies
View Related
Nov 12, 2012
I have tested each antenna separately. With each antenna attached one at a time the left and right antenna is giving me -20 signal. The center is only giving me -65 signal. Is this a problem with the router or normal? I noticed that the center pin is pushed in more then the left and right. Don't know if that is the cause.
View 14 Replies
View Related
Sep 14, 2011
I currently have a WAP4410N connected to an ethernet switch and the signal is very weak when attempting to connect to the AP from 4 rooms away. The structure is all block and the signal does not do well between the solid walls. I would like to roam from room to room on the same SSID. how to have the second WAP4410N repeat the original signal and reaplify it from the first WAP to solve this issue. Also, I cannot connect the second WAP to the ethernet switch it must be wireless.
View 1 Replies
View Related
Apr 24, 2012
A while ago I replaced my wireless card, and the new one get's considerably weaker signal strength and drops out periodically. I'm sure the problem is with the card itself (or its firmware). It not only get's weak signal strength from my router, but every surrounding network, and sometimes can't detect any networks for a few minutes. I've used several other wi-fi devices in the same spot where this system is sitting and they all get excellent signal strength.I've already tried changing channels on my router and re-installing drivers. Neither has any effect.The card in question is a TP-Link TL-WN951N.
View 19 Replies
View Related
Apr 27, 2013
I have been using a Magnavox 5130 BlueRay Player for a several years. Recently, over the last 4 to 6 months, we have experienced connectivity issues with Netflix. My router is on floor 2 in my office, and the signal strength is strong throughout the house. The Wii with Netflix is in the basement, and it never has a connectivity problem; two laptops are used throughout the three levels with no connectivity problems. So why does the wireless connectivity on the blue ray player suffer? It shows a weak signal, yet when I place my laptop next to it, it shows 5 out of 5 signal strength.I thought maybe there was something in the entertainment center that was perhaps interfering with the signal, so I moved it outside and on top of the entertainment center; no fix.
View 3 Replies
View Related
Nov 14, 2012
I am researching power adapters versus range extenders to bring the best signal to a new home theater so I can stream Netflix. I don't do much else (gaming etc...) and am not a tech person. I just want to enjoy movies in an area of my house that gets little or no signal. Didi I waste my money buying smart? Can I still do an ethernet connection off the power adapter? Should I put another router there instead--- off the adapter- so I can use the theaters wifi?
View 1 Replies
View Related
Dec 20, 2011
My wireless network signal is great on the first floor, but is weak on the second floor. I have tried different antennas and various locations for the antennas, but with little improvement. I prefer not to purchase signal amplifier. I have a second identical router. Can it be connected to the current router (LAN output) and by way of a cat5 cable, placed on the second floor to boost the second floor wireless signal?
View 8 Replies
View Related
Dec 7, 2011
So I just got this router in hopes that I would get a better signal within my room as opposed to my older router. Unfortunately, nothing has changed, in fact I think I'm getting weaker signals. My previous router was a D-Link WBR-2310. I went to speed test.net and tested 3 variables. My wifi on my desktop in my room, my wifi when right next to a router on my laptop, and my wifi using my neighbors wifi in my room.
My room Desktop Wifi:
Download was 0.50 mbs Upload: 3.6
My laptop right next to Router:
Download 19.87 mbs Upload: 3.5
My room Desktop Neighbors Wifi:
Download was 17.3 mbs Upload was 3.32.
What is the point of this new wireless N router, when it can't beat a G router older model in reach? And why does is have a 0.50 mb d/l speed but a 3.6 upload speed?
View 4 Replies
View Related
Jan 5, 2012
I have a DIR-825 in my basement at one end of the house and it works great. My problem is the signal strength is a little weak on the main floor at the other end of the house. I would like to add a second access point to cover that end of the house. Do I need to get another DIR-825 and wire it to the original or is there another option? I obviously don't need all the features of the DIR-825 for the 2nd AP, but I cant find a less expensive option that will still allow me to use both bands.
View 6 Replies
View Related
Jan 27, 2012
I tried to create a L7 class-map for blocking the clients with ciphes strength less than 128 in ACE20 running with Software version A2(2.3).But there were no command inside the L7 class-map called cipher for matching the cipher strength 128. Command Tried to issue was host1/Admin(config-cmap-http-lb)#match cipher less-than 128 So I want to know whether this is possible on ACE 20 and SW version A2(2.3). Kindly suggest a way to acheive this.
I have seen some other configuration using the parameter-match, But I dont know the Cipher Names which to allow. I want to drop all the connections with less than 128 bits cipher strength.
View 5 Replies
View Related
Mar 1, 2011
I am becoming very irritated with my laptop. I would like to know why I can only connect to the network Linskeys, and it'll have this little yellow thing, and it'll say its connected but once i click and internet thing (like google chrome) it will say I am not connected.
View 4 Replies
View Related
Apr 19, 2012
my brother wanted me to download some program on my computer, i did so and it needed a reboot, once i rebooted i couldnt connect to the internet anymore. its been like this for about 3 weeks. i would really like to be able to use my computer again. it says its connected to a unidentified network, but cant connect to the internet.
View 13 Replies
View Related
Oct 7, 2012
Is there such a thing as a repeater, or relay which can receive the wireless signal from the router which is situated at one end of the house, and resend it to a part of the house that doesn't get a good signal from the router?
View 1 Replies
View Related
Jul 20, 2011
Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost.
View 2 Replies
View Related
Dec 20, 2009
I bought the WMP600N because Linksys and Microsoft listed it as 'compatible' for Windows 7 x64. My experience:
- unstable and weak connection
- pings to websites like google.com drops, average: 1 out of 3
- low signal, on the same spot my three years old HP-laptop with 'a build in wireless card' has full signal strength in Windows 7
- it works well under Windows XP (32 bit)
I am convinced that drivers for the WMP600N are not ready for Window 7 x64. Linksys (or Ralink, which developed the chipset), release a proper driver for the WMP600N.
View 9 Replies
View Related
Jun 10, 2013
I have a Belkin N300 Dual-Band Wi-Fi Range Extender but the signal light is always amber and I have difficulty connecting to the N300 wi-fi. Can I use a wired Ethernet cable to connect to it rather than it picking up the existing weak Wi-Fi signal?
View 1 Replies
View Related
Apr 8, 2012
I am trying to setup two Cisco 1310 bridges (AIR-BR1310G-A-K9-R) for connectivity between two buildings. No external antennas have been setup yet and I am just setting the basic configuration.One is running c1310-k9w7-mx.123-8.JEA3, the other c1310-k9w7-mx.123-7.JA1,setup as a root-bridge, the other as a non-root bridge.However, even after disabling authentication and encryption, both units are still not talking to each other.Maybe a second set of eyes can see an issue?
View 7 Replies
View Related
Mar 31, 2012
I just bought new Dell Inspiron n4050 Laptop " Dell Wireless 1702 802.11b/g/n"the wireless signal tooooo weak near the router (less than 10 cm ) !! and i have dell inspiron n5010 and the signal is too strong !
idk if that hardware problem or soft !the driver software is R302726
View 2 Replies
View Related
Sep 19, 2011
I have an internet connection of 100.0mbps and have two pc connected to it sharing internet connection but the other pc can't connect to internet when the other one is connected? how can i i fix it?
View 16 Replies
View Related
