Broadband :: Internet Connection Could Not Be Established?
Sep 12, 2011internet connection could not be established. the port used was closed.
View 1 Replies
ADVERTISEMENT
Wi-Fi Connection Is Lost And Needs To Be Re-established Wndr4500
May 27, 2012I have the netgear wndr4500 setup on my home theater shelves which are located in the corner of the room. When using my ASus G74sx with the Atheros 9002 wifi I consistently get disconnected. The wifi connection is lost and needs to be re-established.
Interestingly, when I am using the laptop downstairs the disconnects never happen. I have pored over my router's settings, updated to the latest firmware, as well as installed the latest drivers on the laptop. I also tried setting the router to short preamble and changing the channels to 11and automatic.
The Dial-up Connection Not Established And Show The Error 777?
Aug 17, 2012I use win7 os and samsung e2652 champ duos mobile. When I connect mobile to pc, the dial-up connection not established and show the error 777: the modem on the remote computer is out of order.
View 1 Replies View RelatedCisco WAN :: 1811 As PPPoE-client / Connection Isn't Established
Jul 4, 2012PPPoE connection isn't established...Config Cisco 1811 (c181x-advipservicesk9-mz.124-15.T15.bin):
Â
...
vpdn enable
...
vpdn-group 1
request-dialin
 protocol pppoe
[code].....
Cisco VPN :: 876 - Connection Established From Firewall But No Ping Answer
Mar 18, 2013We try to establish a Site-To-Site- IP Sec- connection between a Cisco 876 (local site) and a Check Point-firewall (remote site). The Cisco 876 is not directly connected to the internet, but is behind a DSL- Router with port-forwarding, forwarding ports 500 and 4500. The running config of the Cisco 876 is appended to this discussion thread. Unfortunately I get no output when debugging the connection with commands "debug crypto isakmp" and "debug crypto ipsec".
From the Checkpoint-firewall point of view the connection seems to establish, but there is no ping answer.
The server on the local site that should be reached from the network behind the Checkpoint-firewall has a routing entry "route -P add [inside ip-net remote] 255.255.255.0 [inside ip local]" (see also appended running config for naming of ip- addresses). Establishing a Cisco VPN- Client connection to the same Cisco 876 router works fine.
D-Link DIR-825 :: Cannot Access Remote Network Resources After VPN Connection Is Established
Oct 22, 2009After I change my router, I recently found out that I cannot access remote network resources after VPN tunnel is established. I use CISCO System VPN client. I can see the connection is successful. I cannot ping server on the remote network
View 2 Replies View RelatedLinksys Wireless Router :: Wifi Connection Not Established (befw11s4)
Apr 30, 2011All my years on the computer and internet, i've only been connected via ethernet directly from my cable modem as i have just 1 desktop. Anyhow, i just bought a laptop yesterday and so, a router is a must to connect wirelessly. I received an old Linksys BEFW11S4 v4 router from a friend and decided to use it as it's still functional. Yes, i know it's an ancient router but i'm on a tight budget.The setup - I have the ethernet from my modem plugged into the router. I have another ethernet cable in slot #1 (router) connected to my desktop. For my laptop, it'll be a wireless connection.Issue - Now, the connection for my desktop (via ethernet cable in slot #1 on the router) works perfectly fine. I have it set up (on browser - 192.168.1.1), added the SSID, WPA Shared Key and such. The only issue is with my laptop. Everytime i switch on my laptop, i cannot establish a connection (after selecting the SSID and entering the key). The ONLY way for me to get a connection is if i power off then on the router. Each time i turn on/restart my laptop, i'll have to power off/on the router in order for me to get it to work.
View 9 Replies View RelatedBroadband :: Internet Connection Sharing Without Hub?
Oct 23, 2011Recently I took a single braodband connection, I want to share that connection to two of my computers with out HUB,
View 1 Replies View RelatedBroadband :: Have The Internet Connection But It Won't Connect?
May 1, 2011i have the internet connection but it wont connect. and theres no file button to select to click to work offline the whole page is blank
View 2 Replies View RelatedBroadband :: Lost Connection To The Internet?
Mar 1, 2011When I try to connect to the internet I get IE cannot dislay the webpage. All connections show that they are working fine. I did the repair option for my LAN, it states that it is working & shows that it's connected.I tried to sign into MSN & got no connection. I ran the repair option & got a DNS & Keyports warnings.I am running Windows XP on my home computer
View 2 Replies View RelatedBroadband :: How To Get Internet Connection On Two Browser
Aug 14, 2011i already have net running on my default browser firefox.but i want the net to run on my other browser chrome........
View 2 Replies View RelatedInternet Working Through LAN But Not Via Broadband Connection
Oct 22, 2012I was trying to do something with wifi settings in my DSL router modem and I messed up. So I created a new DSL router configuration with PPPOE and internet is getting automatically connected and working fine. But, When I go to connect to the internet it is giving me Error 651. But, the internet is working fine, when I checked in Networks LAN was configured to connect to the internet but not the connection I regularly use. The status is "Currently connected to network". The connection I use to connect to the internet is now giving 651.
View 5 Replies View RelatedBroadband :: No Internet Connection After Rootkit Removal?
Nov 10, 2011I had a serious infection in my PC desktop (a very harmful class of rootkit) and the only onle solution was Combofix. But after "cleaning" my Internet connection is not working anymore. All the solutions I have found about restoring Winsock funcionality were useless.I have a laptop connected via Wi-Fi and it is working fine. So any problem with my modem or router should be ruled out.Especially because the same desktop can connect to the Internet using Ubuntu Linux.
View 3 Replies View RelatedBroadband :: How To Make Internet Connection Faster
Nov 18, 2011My Internet is very slow, It makes me impatient, I can't stand waiting and I'm afraid to do some stupid clicks.
View 4 Replies View RelatedBroadband :: How To Use Desktop Internet Connection For Laptop
Feb 1, 2012i have a local cable internet connection(no modem,no router) which i plug in the back of my cpu and its all seT.now,it is for my desktop but when i insert that cable in my laptop.,it says username and password incorrect.i called up my ISP and he said i can use my internet only on my desktop and not on any other computer.is there a way out of it? can i use that internet on my laptop somehow? i dont wanna use the internet on both(laptop and desktop)so im not asking for something complicated.
View 8 Replies View RelatedShare A Dial Up VPN Broadband Internet Connection?
Sep 12, 2011How can I share a dial up VPN Broad band internet connection over wifi i want to share this dial up connection at my laptop over wifi what necessary hardware require to share internet wireless at my laptop.
View 4 Replies View RelatedBroadband :: Having Two Internet Connection On Single Network?
Oct 6, 2012i have a BSNL Broadband connection (1st Connection- input via RJ11-telephone line) thru ADSL2 + modem and now i have another Internet connection provided by another ISP(2nd Connection input via DSL - RJ45) thru Asus RT-N10E WireLess router for backup in case 1st ISP fails. now when 1st fails i have to switch to 2nd one manualy.s there a way by which my computer could switch over automatically to 2nd or visa versa to have a seemless connection.2nd issue related to it is that i have my n/w sharedrive and n/w printer connected (Wired) thru 1st Connection. when i switch to 2nd Connection i can only access internet connection but the n/w printer and shared drive are not available.
View 3 Replies View RelatedBroadband :: Browsers Not Connect To Internet Even Have Decent Connection
May 24, 2012Firefox, Safari, SeaMonkey nor Chrome can´t connect internet even I´ve got internet connection
View 5 Replies View RelatedBroadband :: Computers Internet Connection Is Very Slow And Locks Constantly
Mar 8, 2013Broadband connection is very slow and goes dormant even when moving mouse on web page to try to initiate applets. Computer locks or freezes constantly in between pages or when trying to open other pages on websites. Takes really long to try to do anything on computer when online.
View 2 Replies View RelatedBroadband :: Share Connection From Hotel Broadband To Wifi?
Jun 1, 2011Half of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
View 2 Replies View RelatedBroadband :: Setup Internet Connection For Every System With BSNL DHCP Modem?
Jul 3, 2011I have 3 systems in my office, LAN connected. how to setup internet connection for every system with BSNL broadband DHCP modem.
View 2 Replies View RelatedUse Wireless Router To Pick Up Internet Signals Using Cricket Broadband Connection?
Jul 19, 2011Is it possible to use a wireless router to pick up internet signals using a cricket broadband connection
View 1 Replies View RelatedCisco WAN :: Configure 861 Router For Simple Internet Access Using Broadband Connection
Mar 20, 2013i am trying to configure Cisco 861 router for simple internet access using my broadband connection. despite of all my efforts, I am not able to browse any site from my directly connected PC having IP address 192.168.1.254/24. but I can ping all internet destinations from router prompt. I believe, I am having problem in NAT becuase I do not see any stats or translations. I have attached the output of running configuration, sh version, sh ip nat stat, sh ip nat trans and sh ip route.
View 8 Replies View RelatedBroadband :: How To Share Reliance Broadband Connection
Mar 1, 2011How to share reliance broadband connection between two pc's using hub or direct line in one computer have windows 7 ..
View 1 Replies View RelatedActive Established TCPs When Offline?
Mar 26, 2013how its possible that even when I turn off wifi on the laptop and even disconnect the modem that when I type netstat into CMD that there is still one or two TCP ESTABLISHED connections? I have waited as long as an hour and there are still established connections even though I am not connected to my internet. if I shut down the computer and reload it again with the router unplugged there will be either no connections or maybe one TIME WAIT connection for one or two IPs. but as soon as I reconnect to the internet then disconnect, the same thing happens where there are established connections to the laptop even though I am not connected to the internet.I use ccleaner to remove all cookies between sessions.
View 4 Replies View RelatedCisco VPN :: 5510 - Get A Tunnel Established?
May 2, 2012I have two 5510's that I am trying to get a tunnel established. One has an exsistinig tunnel to a 5505 that works but I cant get the next one to get past the first phase. I have sanitized the attached configs
View 5 Replies View RelatedCisco :: IOS 12.x+ Port Forward Only Established Connections?
Apr 3, 2013Using Cisco IOS 12.x+ on a router.How would create an ACL that will only allow access to a port from the inside only after it has been established. i.e. similar to port triggering? Inside host 10.1.1.60 needs to use port 61200 for bit torrent. Dont want the port to be visible as open to the global net accept when the host 10.1.1.60 establishes the connection first.That way a port doesnt have to be left open 24-7.
View 4 Replies View RelatedCisco :: After Tunnel Is Established Can't Ping Anything On Other Side
Jan 20, 2013i successfully established site to site with 2 two ASA 5010. The problem is that traffic on not passing, This is current setup:1) Left side : only 1 private network 3) Right side : 1 private network, management network, 2 DMZ networks with public IP, On right ASA some netting is setup so servers in DMZ can be reached from private network. The goal would be that VPN client on left side can reach all resources on the right side (except management network, Just to get things going tunnel is built with only left and right private networks, but after tunnel is established i can't ping anything on other side.
View 4 Replies View RelatedCisco Routers :: IPSec SA Not Established 2 RV110W
Apr 7, 2013I make a vpn site-to-site IPSEC tunnel between 2 RV110W the above ,you will find the configuration
Â
Site1
Site 2
always the same message
Cisco VPN :: 5510 - ASA 8.4.(1) VPN L2L Can Only Be Established Through Default Gateway
Jun 19, 2011We have an ASA 5510, with two internet connections. One inteded for VPN l2l and the other for general users inet access.
On asa 8.04, I configured the crypto map on inteface "VPNAccess" and a static route to the L2L remote peer through VPN internet access, the default rotue was pointing the general inet router.
Â
We bought a new firewall with 8.4.1, and now asa only tries to initiate traffic if remote peer is on the default gateway.
Â
It ignores more specific routes (i mean longer masks) and always tries to use default gateway, but only for VPN, if I make a trace route for that peers it uses correctly the routing table.
Cisco Firewall :: ASA 5520 ACL Established Connections Configurations
Jan 16, 2012 I have one ASA5520 with version 8.4(3), and a few ACL rules defined. One ACL is permit traffic from one interface(EXT_SERVICE) to another interface(DMZ_SERVICE), if i change that rule to deny traffic, all new connections that match the rule is denied, but no the established connectios. ¿Why the established connections can pass the deny rule? ¿How I can change that? I need create a ACL with deny type and stop all comunications that is running and match the deny rule.
Running-config of my ASA5520:
ciscoasa# show run
: Saved
:
ASA Version 8.4(3)
!
hostname ciscoasa
enable password 8ay2wjIyt7RRXU24 encrypted passwd 2wFQnbNIdI.2KYtU encrypted names !
interface GigabitEthernet0/0
[Code] ........
Cisco Routers :: VPN - SRP527W / 857 Established But No Tx Traffic On SRP Side
Aug 2, 2011I have now the sa`s stablished between SRP527w and cisco 857, but If i ping from a host of Cisco side to a host of SRP side I get only rx traffic on the tunnel, the stats keep tx at 0 and ping is not answered.My tunnel is to send some voice call into IPSEC tunnel keeping DSCP bits, It comunicate SRP voice vlan with Cisco lan.
I have on SRP 2 vlans:
1 Vlan for data on ports 1,2 and 4
1 voice vlan on ports 1,2,3,4.
Â
I connect a netbook to port 3 and I can connect to internet but I cant reach by ping the other side of the tunnel?Maybe traffic from voice vlan is being natted with data vlan ip address?I need all traffic must go into the tunnel without being natted, on cisco side I have a policy to avoid nat but don know if SRP have any problem about it too.All gateways are ok ?
Shares The Broadband Connection?
Jan 21, 2013Sky router setup in the living room, with a NAS, TV, PS3 connected to it.In my office (separate room), i have 2 laptops and a desktop PC.My question is:If i want to connect all of the equipment in my office so that it shares the broadband connection am i right in thinking i would need to by some form of switch? where the switch would be connected to the phone socket in the wall, and the 2 laptops and desktop PC would be connected directly to the switch.?
View 4 Replies View Related