Cannot Map Network Drive (Reservation Inactive)
Apr 14, 2012
Two people went on a business trip with their laptop and when they came back they could no longer access the data server. Cannot map the network drive either.
1. Every desktop PC in office can see and access the data server fine.
2. We have a DHCP and DNS server (on one PC; Windows Server 2008), but we had to shut down the services because internet and email didn't work when the DHCP and DNS server service was on. I am confident that this is due to the recent shutdown of the company e-mail server (now outsourced) and the server settings needs to be reconfigured. The described symptom persists even when the DNS server service is stopped.
3. Upon taking a closer look at the DHCP reservation settings. The reservation status indicates as "Reservation (inactive)". I don't know the MAC address of the device, so I have no idea if the values are correct. Tried rebooting the server, delete and recreate the reservation, reboot router; no cigar.
4. Using the coworker's laptop, the data server is shown in the "Other devices" section even with the DHCP sever disabled, but shows error that it cannot access it.
5. All users, with the exception of the data server, have dynamic IPs assigned.
6. DHCP, DNS server is set to 10.10.10.2, Router is set to 10.10.1, Data server is set to 10.10.10.175. 10.10.10.2 is also an accounting server which can be accessed by everyone even in the midst of this mess.
View 1 Replies
ADVERTISEMENT
Jun 5, 2011
what is the difference between network drive and map drive?
View 1 Replies
View Related
Nov 18, 2012
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I wanted to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username.
What is causing this and is there a way to get around this? Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
View 1 Replies
View Related
Aug 11, 2012
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
View 1 Replies
View Related
Nov 14, 2012
I'm having issues getting the ports g3/5 and g4/5 from inactive to notconnect.
I have tried the hw-module uplink select all in the global configuratio, but it's not working, getting a : % Invalid input detected at '^' marker. Message every time.
This what I have:
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 JAE152101QK
[Code].....
View 2 Replies
View Related
Mar 1, 2012
I have one cisco 2811 router.One cisco 4503 core switch.And one cyberoam UTM.VLAN 16 on router connected to VLAN 16 of core switch.VLAN 3 on router Connected to UTM.VLAN 2 on router connected with Internet Leased line. And one MPLS VPN terminated at Fast Ethernet port.All ports are fast Ethernet Port on router and all Gigabit Ethernet Ports on Core Switch.Now coming to the point, whenever the router becoming inactive the fast Ethernet ports are working but switch module ports not working. and that point we have to reboot the router.
View 2 Replies
View Related
Dec 20, 2011
I am running the following
WLC: 7.0.220
MSE: 7.0.220
NCS: 1.0.2.29
NCS shows Controller is not reachable from MSE. I am able to ping to and from the Controller and MSE.Sychronization service is showing everything being synchronize. Removed and MSE from NCS and add it back in several times.
View 8 Replies
View Related
Jun 15, 2011
Is possible clean inactive IDBs?I have a Cisco 3825 that support up to 1200 IDB and now is using 1102, but 614 is inactive.
[code]....
View 4 Replies
View Related
Jun 22, 2011
Got a mind-boggling issue with a Gig0/2 port on Cat2960 48TTL, the port seens dud. I cant enable it, its not shutdown either. However, when I restart the switch, on CNA, i can see the interface flash amber (as all ports do when restarted) and goes grey. The cable is ok and works on other interfaces on the same switch. Without having to buy a whole new equipment, is there a way I can test wether the port is faulty, as in physically, or I have missed something.
View 7 Replies
View Related
Mar 17, 2011
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies
View Related
Apr 15, 2013
My company has a DCS network that was previously segregated with a layer 3 switch and a handful of access lists. However, there came this big push to segregate all DCS networks with Firewalls, so I purchased a 5505 and duplicated my simple access lists on the firewall and everything worked. There is no NAT, just explicitly permitted traffic out and explicitly permitted traffic in. However, there are some applications that connect and work fine for a few hours, then disconnect and the user must exit out of the application and go back into it, then it starts working again. Previously with the Layer 3 Switch/access lists, this never happened. Since I put the firewall in place, it has happened 3 to 4 times a day every day for the last week.
View 4 Replies
View Related
Aug 31, 2012
I have a switch WS-C4507R + E, added two SFP SFP-10GBase-SR, and they stayed with inactive status, activate these interfaces in 10Gb.
SWC-DC01#sh interfaces status module 4
Port Name Status Vlan Duplex Speed Type
Te4/1 connected trunk full a-1000 1000BaseBX10-U
Te4/2 notconnect 1 full auto No XCVR
Te4/3 inactive 220 full auto 10GBase-SR
Te4/4 inactive 220 full auto 10GBase-SR
[code]......
View 1 Replies
View Related
Jun 17, 2011
I am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
View 3 Replies
View Related
Mar 19, 2012
I'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies
View Related
Jan 29, 2011
I am trying to install a WPC54G adapter in a Compaq EVO N610C Laptop with Windows XP SP3 and it has a Texas Instrument PCI-1420 CardBus Controller. Adapter is inactive. I have uninstalled, reinstalled, download updated drivers from Linksys.
View 1 Replies
View Related
Jan 22, 2013
We have 3 Cat 4500 switches on three floors teh 3rd floor switch connects to the 2nd and 4th floor switches ,but we are receiving an alert from monitoring tool that " Interface(314) Backup-1Gb-Ring is Down at least 2 min on Switch: SOM500-4510-3FL the following output from "sh int status module 1 " shows the int 1/3 and 1/4 are 'inactive'local IT guy said If the status is inactive,the ports cannot be used and might lost the capability when he added 48-port blade into the 10th slot.
2nd Floor
Port Name Status Vlan Duplex Speed TypeTe1/1 SOM500-Core1 connected trunk full 10G 10GBase-LRMTe1/2 SOM500-Core1 connected trunk full 10G 10GBase-LRMGi1/3 Backup-1Gb-Ring notconnect 1 full 1000 1000BaseSXGi1/4 Backup-1Gb-Ring connected trunk full 1000 1000BaseSX
3rd FloorPort Name Status Vlan Duplex Speed TypeTe1/1 SOM500-Core1 connected trunk full 10G 10GBase-LRMTe1/2 SOM500-Core1 connected trunk full 10G 10GBase-LRMGi1/3 Backup-1Gb-Ring inactive 1 full 1000 1000BaseSXGi1/4 Backup-1Gb-Ring inactive 1 full 1000
[code]....
View 6 Replies
View Related
Jun 2, 2011
We have a user that works from home and connects to our network through a VPN when she needs to access files on our server (mapped as a shared drive.)I created a new shared folder on that same server and she can't map a drive to it. It just continuously prompts for username/password.She is running Win 7 Pro, server is Server 2008. The server is on a domain, she is not. She already has a mapped drive to a different folder on the same server as well as to a folder on another server. We are trying to map using the IP address (\IPFolder) and have tried putting the username as IPUsername and just Username with no luck. Tried mapping with net use. Found some stuff online about changing some registry values - tried that. Change the network type from "Home" to "Work" and still no luck.
View 14 Replies
View Related
Feb 11, 2012
We have a network drive and it's ip is 192.168.1.3. We have created different users with different permissions for each folders. I have a problem in mapping the network drive in each computer. I can map each folder in them though.I access the drive using run command \192.168.1.3 and it displays all folders. I map the folder but don't know how to map the drive itself.
View 2 Replies
View Related
Feb 2, 2011
A program is installed on our server, and I run it on my pc by mapping a network drive to the server's hard drive.I'm sure you all know this procedure.Anyway, I can access the shared drive on the server from my pc, browse, create and delete files on the server, all fine.But, when I try to map the drive, it says:"Windows cannot find 'WEaXA.EXe'. Make sure you typed the name correctly, and then try again."And its only on my pc this happens, on all the other pcs its working fine. And from my pc I can map any other shared folder/drive.
View 1 Replies
View Related
Dec 20, 2008
I've spent several hours of my life trying to rectify this silly problem without peace. Maybe one of you can enlighten me. I've got a Win98 laptop and have loaded the driver specified from the Linksys website. The software from the website under "Version 1" downloads a file entitled "...driver utility v3.1." I've installed and uninstalled it 3 times with restarts inbetween. Each time Device Mngr shows it is installed correctly but the "inactive" status persists. I get a "Power" light indicator but never the "Link" indicator on the adapter. I do not have a firewall or any other software that would interfere with the access point I have at my home (which works just fine with my Vista laptop). Furthermore, the wireless router is not secured either, so it is wide open and broadcasting. But as I said, the adaptor isn't even showing as "active" so all that stuff is moot I guess. I can not upgrade the laptop to another OS, it is an antique from 1999 and can't cut the mustard with the RAM and processor speed it has. Besides, it should work just fine with Win98 anyway.
View 4 Replies
View Related
Jan 4, 2012
I have two WLCs (5508 - v7.0.220 and 2106 - v7.0.116) that were NMSP connected to a MSE (v7.0.201.204) according to WCS (7.0.172.0)The MSE reloaded (Actually a reload command from WCS hung the MSE and it hard to be hard rebooted) and I ran into a NTP issue with the MSE running GMT timezone and WLCs running GMT -8. This was highlighted by the NMSP status testing tool. As a quick solution I changed both WLCs to GMT. The tool now tests all green, but the NMSP status remains Inactive for both WLCs and I have no client or tag information flowing into WCS.
View 3 Replies
View Related
May 4, 2013
I've browsed around to the other support strings to make sure I didn't miss anything, but I can't seem to get this to work. I have the latest sl_suspend_ports.tcl and tm_suspend_ports.tcl created by Joseph Clarke from strings that verified they worked as planned. Here are the commands I issued to register the scripts -
Directory of flash:/policies/
9 -rwx 3101 May 3 2013 07:58:03 +00:00 sl_suspend_ports.tcl
10 -rwx 4669 May 3 2013 07:58:44 +00:00 tm_suspend_ports.tcl
conf t
event manager directory user policy flash:/policies
event manager policy sl_suspend_ports.tcl
event manager environment suspend_ports_days 1
[code].....
It doesn't appear to work though. Essentially, we have a need to make sure all computers are always on and all ports not active for >24 hours to be shutdown and moved to a designated vlan (I added the 'lappend' statement to the script to specify the additional command of assigning the vlan) I'm running 12.2(55)SE7 on Catalyst 3560s and 3750sIs there a way to manually run the script? Did I miss anything in the configuration?
View 19 Replies
View Related
Jul 22, 2012
I have a pair of ASA 5540 running 8.4 code. The firewall set has about 4500 rules. I am tasked to identify all unused/idel/inactive rules in the past 3 months.
View 2 Replies
View Related
Jun 9, 2011
One of my Laptop, I cannot see the Network Share Drive from My Network Place. I am using DNS320 Dlink. But I can ping and I can access web base go inside Network Share drive management. But when I try to ma \sharedrivenamefolder, "Error code 0x80070035 Network path was not found ". I already restart the network drive, router and this computer also cannot. Last time we using vbscript to set at startup and let it map automatically when window boot up every day. Other PC with XP all can access. I cannot upgrade vista to 7 because it's from remote site. But now why cannot I don't know what happen with Fuzzy Vista home.
View 3 Replies
View Related
Jul 27, 2011
I have a Windows XP SP3 PC and want to map a drive on it thorugh my wireless network
The wireless network has a router (SpeedPort W 701V) that connects to internet, this wireless network is password secured (WPA personal) and open to any device that knows the password.
View 2 Replies
View Related
Nov 2, 2011
I've seen some supposed 'tutorials' on this but they differ quite a bit: do any of you know for sure how to map a microsoft skydrive folder as a network drive so that clients can use it as a 'normal' way of sharing files?the same question could be posed for Google Docs - I guess these are competitors/equivalent in aim.
View 6 Replies
View Related
Feb 2, 2012
In my office I have set up a NAS server which is connected to a Netgear VPN router. When I try to connect remotely I can open the VPN tunnel but when I try to access the network drive, it says the network path cannot be found.
View 3 Replies
View Related
Apr 5, 2012
Is it possible to Map a Network Drive over a VPN?Users in my company connect to a remote site using VPN (PPTP) and i am wondering, can i map a drive to the PC i am on from the remote network while connected to VPN?
View 10 Replies
View Related
Aug 28, 2012
I have a 1TB internal SATA HD that I want to turn into a network drive. Since the MB in the desktop I had this drive in fried, I'm looking for options to network this drive (that stores photos, music, utilities, etc). So far after brief research, looks like my most reliable option would be an external enclosure with USB and a router with a USB share port.
-what other options do I have?
-what would be a good wireless N/G router with a USB share port, great range or range extender option and can handle multiple devices online (xbox, ps3, wii, droid phones, 2x or more laptops, wifi Tv all not connected at once, but a few can be, so I need a router to handle the demand)
-a good reliable external enclosure
I need a router that has a good strong signal. The current G router I have (d-link di-524(?)) works ok, but the signal cuts out in the kitchen and virtually non-existent in my garage (to use Pandora on phone).
View 4 Replies
View Related
Feb 7, 2012
I have a Blackberry Playbook and have come into a problem with it.I can't set a Static IP on it so would setting a DHCP Reservation in my Linksys E2500 router act as a static IP?
View 2 Replies
View Related
Mar 22, 2012
User connects through a sonicwall device via SSL VPN and gets a static IP every time, despite what device they come from.
1. LDAP somehow supplies the IP from a DHCP server behind the sonicwall
2. The sonicwall somehow supplies the static IP on the interface that the net extender is connected to.
View 2 Replies
View Related
Apr 2, 2011
I'm using TP Link router. I went to DHCP reservation list and provided mac address of a computer and ip address to reserve the ip address for the computer. But it still not changing my current ip address. I rebooted router, rebotted computer, but it still not changing to the reserved ip.
View 3 Replies
View Related
Sep 15, 2011
I'm trying to share my drive thats on my desktop PC to my Netbook. But I want it to show up on my netbook like a local disk drive. Is this possible? Would I need a software for this and if so which one?
View 1 Replies
View Related
