Cisco AAA/Identity/Nac :: 2960S Web Authentication With RSA Secure-ID On Switch
Feb 4, 2012
I've recently been looking into linking in our Cisco 2960S Gb Switch with RSA SecureID via Radius.I've already managed to link it in for ssh access
but I've not managed to get it working for http / web access to the switchI think this is because we're using "single use" tokens for maximum security with RSA Secure-ID and the web interface attempts to authenticate multiple times against the Radius part of the RSA SecureID server (okay on the first authentication, but each time after it's going to want a different token code)
(if there's a way to get the switch to just authenticate once instead of multiple times against the radius server) For info the switch is a WS-C2960S-24TS-L with IOS 15.0(1)SE2
View 2 Replies
ADVERTISEMENT
Mar 22, 2012
configuring 802.1x authentication on ACS 5.1.0.44 & Catalyst 2960S switches.All the documents i have found seem to have incorrect screen shots or missing steps.I have found a doc external to Cisco [URL]however this just hangs when attempting to complete the task in figure G.The other docs are for configuring IBNS & assume that 802.1x is already configured.
View 1 Replies
View Related
Mar 15, 2012
I am setting up an LDAP identity store over ldaps in ACS 5.1. I specify that the connection uses secure authentication and provide the Root CA certificate. When I hit "Test Bind to Server", I get this error message in a popup window: "Connection test bind Failed :server certificate not found"Is this saying that ACS can't find the CA certificate uploaded, or does it mean the actual certificate presented by my LDAPS server during the bind test?
View 2 Replies
View Related
Apr 20, 2011
I am testing a ACS 5.2 in our lab environment, I am testing port security for policy based VLAN and ACL assignment. The problem I am having is with the 2960S switches; in my current setup it is working but it doesn't seem to me like it is the way that it should be working. I have a downloadable ACL in the ACS defined and associated to an Access policy and it is working correctly. The problem is, from what I understand, I have to assign a default ACL on the switchport? So what I have assigned on the switchport is ip access-group 10 in. The downloadable ACL from the ACS is also called 10. Do I really need to match the ACL on the switchport with the ACL name I have created in ACS? That doesn't seem like it's dynamic if that is the case? What is the ACL that I should apply to the switch port (if any) in order for the downloadable acls that I configure in the ACS to work no matter what port the user is patched into?
View 2 Replies
View Related
Mar 18, 2012
I am using 802.1x authentication with multi-domain ports; Phone and PC connected to phone. The phones are Nortel (Avaya) and the PCs are Dell/HP Laptops. All are configured for Certificate authentication and this works well. However we sometimes get some ports stuck in Guest mode. when a non certificated laptop connects to a phone port and fails authentication, the data port is placed in the Guest VLAN. However when the laptop disconnects the port isn't reset and remains in the guest state. When a subsequent good laptop connects and attempts to authenticate the switch ignores this and leaves the data port in the Guest VLAN. he switch is a 2960S with Version 12.2(58)SE2 IOS.
The port is configured as follows:
!
interface GigabitEthernet1/0/15
description DANS Port
switchport access vlan 1807
switchport mode access
switchport voice vlan 1855
priority-queue out
[code]....
I placed the AAA, dot1x, eap and auth debug on for all events and then connected a good laptop, the only debug message I got were as follows:
Mar 19 16:17:01.391 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:01.653 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
Mar 19 16:17:02.654 GMT: AUTH-EVENT (Gi1/0/15) dot1x_switch_is_restrictive_vlan_open_auth:Multi-Host with Guest Vlan/Auth Fail Vlan or open aut
[code]....
I would have expected the auth function to have reacted to the EAP packets sent by the good client when it connected and performed eap authentication but it didn't, all it did was say the ports in Guest mode and left the laptop in this VLAN.
View 2 Replies
View Related
Mar 29, 2011
I would like to make a centralized management of loggin account on my cisco switch (with a radius server). But, on Cisco 3750 E, i use 12.2(44) SE1 IOS and no command aaa authentication login exist.
Cisco 3750 can support other IOS than 12.2 who have this ability ?
View 2 Replies
View Related
Mar 27, 2012
on the followup the document "Configuration example : central web-authentication with a switch and Identity Service Engine" by Nicolas Darchis, since the redirection on the switch is not working.
I'm using ISE Version : 1.0.4.573 and WS-C2960-24PC-L w/software 12.2(55)SE1 and image C2960-LANBASEK9-M for the access.
The interface configuration looks like this:
interface FastEthernet0/24
switchport access vlan 6
switchport mode access
switchport voice vlan 20
ip access-group webauth in(code)
View 12 Replies
View Related
Jun 8, 2013
how ISE support on third party LAN switch, if the requirement is doing 802.1X based flexauth.Refer to the diagram i attached; 01 topology.png
Concern 1: if the 3com switch with 802.1X feature, but still without the full feature to support FlexAuth, policy encforcement, DACL etc. In this kind of situation, will user still able to authenticate (using method PEAP-MSCHAP v2), but authorization just grant with permit any any?
Concern 2: Can i assume i authenticated the 3com switch using MAB? But this will cause endpoint with no 802.1X, am i right?
Concern 3: cisco switch C4507-E, loaded with IOS version Cat4500e-UNIVERSALK9-M, version 03.04 and Supervisor Engine :WS-X45-SUP7-E, is this platform is supported in Cisco TrusctSEC?
View 2 Replies
View Related
Nov 6, 2012
I have been successfully able to setup Cisco AnyConnect VPN on ASA 5520 with 8.4 code. I have set it to authenticate against the RADIUS Server (Microsoft Windows 2008 NPS server). I have noticed one thing, on the server under "Constraints and Authentication Method". I picked MS-CHAP-v2, but it is considered Less secure authentication methods. I can click on Add and choose other Authentication methods like Smart Card or other Certificate, PEAP, EAP-MSCHAP v2. I picked PEAP but then the VPN does not work.
So first of all does it really matter if I just leave it to MS-CHAP-v2? Because from my understanding is that AnyConnect will authenticate to ASA and then ASA in the backend talks to the RADIUS server so from a security stand point this scenario shouldn't it be sufficient as no un encrypted or less secure information is available to the outside world? Secondly is there any documentation on using PEAP with Cisco AnyConnect?
View 4 Replies
View Related
May 10, 2010
We need to move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS per Windows version 4.2.
View 10 Replies
View Related
Nov 16, 2011
All users are located in the local identity store.So - assume I do not implement ACS but I do turn on password expiration after 60 or 90 days. Will a user whose password is about to expire attempts to authenticate against ACS 5.2, will they be notified that their password is about to expire?Also, when a user attempts to authenticate but their password expired yesterday, will they be prompted to change it and if so, how will that prompt to change it be presented?
View 3 Replies
View Related
Dec 6, 2011
We're using Cisco Secure ACS 5.2 as a Proxy AAA server, using Active Directory as an External Identity Store. They are already synced and connected and thus I can login into the VPN using my Domain credentials.
But that's not enough. My client needs to limit who can and can't establish VPN session, I mean, the way it is now, EVERY single employee can do that if his/her credentials are valid in the Active Directory domain controller. So I need to do two things:
1) Using the Microsoft NPS server, via dialin attribute, allow or deny VPN sessions using ACS/ASA;
2) Using the company user credential attribute to identify which Authorization Group the requesting user should be in, Downloadable ACLs will then be applied according to the access policies created for each company.
View 3 Replies
View Related
Jan 16, 2012
I configured before ACS v4.2 to authenticate network devices using internal users at first, and if the user is not found use AD list users. But with v5.3 I have some problems doing this, on identity policies I use rule based result selection option, I configured 2 polices for Identity source, one for Internal Users and other policy for AD user, but it only works with the first policy, internal users or AD, but works only for the first policy identity. how to do that, if the user is not found on first policy, continue to the next policy.
View 7 Replies
View Related
Jul 3, 2011
I need a specify users to allow access to particular devices and give privilege only for show command or show run. Here is how I tried to configured.
1. Configured two seperate Shell Profile and Command set with privilege level 4-5 and allowing only show run command
2. create seperate service selection rule with adding the require NDG and protocol TACACS and maching service "RestrictAccess"
3. In the RestrictAccess Service I have following configured; Identity: internal users, Group Mapping to a particular group where the user exists, authorization: matching the above created identity group, NDG, shell profile, command sets
All the steps are attached in the .doc file. However when I tried with the particular user he is able to access everything and he is not hitting the correct access rule.
View 6 Replies
View Related
Mar 10, 2013
Cisco Airespace configuration in Cisco Secure ACS v5.3. We're migrating to ACS v5.3 but we're encountering an issue with Cisco Airespace. It is only working on ACS4.1 but when we tried to move it to Cisco Secure ACS v5.3, it is not working.
View 7 Replies
View Related
Jan 13, 2013
I want to use RADIUS (of Secure ACS 5.3) to authenticate users within an ISP environment. Users log connect to a network using a point to point connection (L2) and then they are sending a RADIUS request to get IP adresses. Secure ACS is not quite easy to look through in that case.
View 3 Replies
View Related
Jan 7, 2010
I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
View 7 Replies
View Related
Jul 16, 2012
I'm with one problem, my OS Lion don't authentication in the Secure ACS Version: 5.2.0.26.10.For the Mac Lion operating system to work you must put in execeção the MAC Address of your computer. I wonder how it could cause the OS to authenticate the ACS Lion.
View 1 Replies
View Related
Jul 19, 2012
We are using version 5.3 with patch 5. Incremental and full backup are configured but every day we receive an alarm notification.
View 7 Replies
View Related
Sep 27, 2012
I am working on project with Secure ACS 5.2. I am trying to determine the proper External Database to use. LDAP or direct to AD?
Additionally, the Domain that I am connecting to has Multiple sub domains. All of the users are currently in the Sub domains, but will be moving to root domain later. How should I configure the connection, do I need to connec to each sub domain or can I just connect to the root?
View 2 Replies
View Related
Sep 1, 2011
I just want to know if i need to support High Availability in Cisco Secure ACS 5.1 appliance, will the base license suffice or do i need to buy Security Group Access System License/ Large deployment License. Again, do we require license for each appliance or just one is enough?
I Suppose the licensing rules are same for the Vmware version also.
View 2 Replies
View Related
Dec 10, 2012
I have a 2960S Catalyst switch in my LAN, with the firewall and the servers in the same VLAN (vlan 3).All the servers and the firewall are in the vlan 3 are in the "192.168.19.0/24" subnet, the firewall has the IP "192.168.19.1".I can land on the firewall with a VPN (192.168.130.0/24) which has a complete view on the subnet 19/24.I can access, manage and get SNMP information of the Catalyst from the servers but I can't do the same from the VPN.Is there some feature I need to enable on the switch in order to allow 192.168.130.0/24 to access it?
View 4 Replies
View Related
Nov 14, 2012
We're running Cisco Secure ACS V5.1 on a Linux platform to manage remote access to many networking devices. This has not been in place long, and is generally working OK. However, whenever I set the parameters of the user authentication to 'disable user account after X days if password was not changed', so as to comply with our internal security regulations, the user IDs seem to disable themselves intermittently, irrespective of whatever number of days I put in this - this can be a couple of days after re-enabling, or just a few minutes.
This can be found in the advanced tab here: System Administration > Users > Authentication Settings.In the mean time, we are having to set the user authentication to be non-expiry. Is this a known fault with this version of software? If so, would there be a patch available, and how would I go about obtaining it?
View 1 Replies
View Related
Nov 5, 2011
provide a sample configuration to use Cisco Secure ACS 4.2 to enable command authorization using TACACS.
View 8 Replies
View Related
Feb 6, 2012
We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2. We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.
While troubleshooting a general problem, I'm guessing that one of us did this on ACS1:
pressed the Network Configuration button,saw the Proxy Distribution Tableclicked (Default)moved ACS1 from the AAA Servers column to the Forward To column.
So, essentially, we're telling ACS1 to proxy all requests to itself, which doesn't seem to make sense. I don't know for sure whether it should work when configured to "self proxy," but in that state, it does not authenticate anyone and gives merely "Internal error" as the reason.
If I change the configuration so that "ACS2" appears in the Forward To column, and I move "ACS1" back to AAA Servers and restart, ACS1 starts responding correctly to TACACS requests. Of course, ACS1 is just proxying all requests to ACS2, so having two servers isn't doing much good.
I cannot simply remove ACS1 from the Forward To column and leave it empty. The interface complains that it can't forward to zero servers. Of course, on ACS2, there are no servers in the Forward To column, since we never touched the Proxy Distribution Table there.
Is there any way to return the Proxy Distribution Table to its default setup, that is, no servers appear in the "Forward To" column?
We're planning to upgrade to version 4.2 very soon, so this question is mostly academic, unless the same problem exists in 4.2.
For full disclosure, I should mention that the problem we were troubleshooting was loss of connectivity to our Windows Domain Controllers from our ACS servers. We had missed adding some exceptions in our firewalls to allow for four new DCs. As far as we can tell from testing, connectivity to the DCs is now fine. The firewall rules group ACS1 and ACS2 together, so connectivity should be the same, and ACS2 authenticates users correctly.
View 2 Replies
View Related
Sep 13, 2012
How many newtork devices can Cisco Secure ACSv4.1 support is there any limit on the same? How to get the Specs of Cisco Secure ACSv4.1 on the above grounds...
View 2 Replies
View Related
Jul 30, 2012
I'm trying to configure an ASA to communicate with an AD environment that is only using LDAP Secure (LDAPS). I've configured authentication to ASA's with LDAP lots of times, though never with LDAPS.
Presumably there is a procedure to install a certificate in the same way as an RSA sig in VPN.
View 3 Replies
View Related
Apr 16, 2012
I have 6 cisco switches already on my network and I just got a 2960S PoE switch that I need to enable for VoIP. The voice vendor is coming in to setup our phone system for VoIP and I need to enable this new 2960S 48 port switch for the VoIP phones, I don't know how to do that, or other taskes needed for this project.
I was told that I need to uplink the new 2960S with the Catalysy 4507R using an ethernet cable and to "trunk the ports" and enable the 2960S as a VTP client - ok great - how?
I was told I also need to use the switch port voice VLAN command for the new VLAN - again, great - but how?
I actually was able to telnet into the switch and I gave it an IP and I created a new vlan but thats all. We are using non Cisco IP phones.
View 4 Replies
View Related
Aug 13, 2012
I have a cisco catalyst 2960-s PoE switch. I have a web access to the switch and am able to get statistics on each port. However, I am wondering if there is a way to have a diagram of the trafic on each port?
Also, what is the best way to monitor the trafic on a router ( i have a cisci 1811W)
View 9 Replies
View Related
Apr 29, 2013
I have a running setup having 2 Cisco 2960s 24 TS switch with Stack configuration. Now I want to add one more same Cisco switch. My questions are:-
1) How can I do this...(Should follow the same process as I did before.
2) Could I do this without impacting the service. i.e. without rebooting the switch.
3) What should be the connection archiecture as of now since there is two switch so it is connected 1 -1 and 2-2. but for 3 switch should we require to change the connectivity.
View 1 Replies
View Related
Jan 21, 2013
I use the Switch 2960S support PoE and 10 access points cisco.I have one more question:
-- If all 10 access points cisco use copper cable to connect to 2960S, 5 access points use power adapter and 5 access points use power from Switch. How Switch 2960S will provide power for 10 AP or switch 2960S will understand and only provide power for 5 APs?
View 3 Replies
View Related
Mar 13, 2011
Am I entitle to upgrade from 5.1 to 5.2 by having smarnet on my 1120 Secure ACS Appliance?
View 1 Replies
View Related
Dec 11, 2012
We have a Cat2960-S Series PoE+ currently running 12.2(55) SE5 ios with SW image C2960S-UNIVERSALK9-M.We want to upgrade the ios to the lastest version but found there are 2 version: 12.2(53) SE2 and 15.0(1) SE.Which is the best & suitable for upgrade?
View 3 Replies
View Related
