Cisco AAA/Identity/Nac :: Delete Proxy Configuration On Secure ACS 4.1 For Windows?
Feb 6, 2012
We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2. We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.
While troubleshooting a general problem, I'm guessing that one of us did this on ACS1:
pressed the Network Configuration button,saw the Proxy Distribution Tableclicked (Default)moved ACS1 from the AAA Servers column to the Forward To column.
So, essentially, we're telling ACS1 to proxy all requests to itself, which doesn't seem to make sense. I don't know for sure whether it should work when configured to "self proxy," but in that state, it does not authenticate anyone and gives merely "Internal error" as the reason.
If I change the configuration so that "ACS2" appears in the Forward To column, and I move "ACS1" back to AAA Servers and restart, ACS1 starts responding correctly to TACACS requests. Of course, ACS1 is just proxying all requests to ACS2, so having two servers isn't doing much good.
I cannot simply remove ACS1 from the Forward To column and leave it empty. The interface complains that it can't forward to zero servers. Of course, on ACS2, there are no servers in the Forward To column, since we never touched the Proxy Distribution Table there.
Is there any way to return the Proxy Distribution Table to its default setup, that is, no servers appear in the "Forward To" column?
We're planning to upgrade to version 4.2 very soon, so this question is mostly academic, unless the same problem exists in 4.2.
For full disclosure, I should mention that the problem we were troubleshooting was loss of connectivity to our Windows Domain Controllers from our ACS servers. We had missed adding some exceptions in our firewalls to allow for four new DCs. As far as we can tell from testing, connectivity to the DCs is now fine. The firewall rules group ACS1 and ACS2 together, so connectivity should be the same, and ACS2 authenticates users correctly.
View 2 Replies
ADVERTISEMENT
Jan 11, 2009
I would like to configure limited internet access to olnly a select group of Windows AD users.
I beleive cut-through proxy will allow me to do this, just not sure how to configure it on a Cisco ASA-5510
View 7 Replies
View Related
Mar 24, 2011
Having some problems blocking users installing/using secure browsers proxy. Currently runing ASA 5520 ver. 8.3 & IPS SSM-20 7.0 (2) E4 & Websense web filtering. Able to block most proxy sites with Websense that use port 80 but recently found that some users using some products like Njutrino that use their own secure browser that use it's own proxy over SSL connection.
View 3 Replies
View Related
Nov 16, 2011
I am unable to open https secure site through cc-proxy
View 1 Replies
View Related
Apr 22, 2011
i have installed system (Windows Server 2003) and i have configure Active directory for testing and configure one user under it ( TEST01)now on the same machine i have installed Cisco ACS 4.2.i'm trying to Authenticate (TEST01) using ACS but it's not working, i can't even see the logs under EVENTVIWER. simple and easy to configure since both AD and ACS is on the same machine.
View 4 Replies
View Related
Jun 28, 2011
I've inherited some ACS appliances from another part of my organization. I need to keep most of the settings but want to remove all the AAA clients; and preferably not one-by-one. I don't see a way in the documentation and web searches have proven fruitless.
View 1 Replies
View Related
Oct 23, 2011
We are evaluating Cisco ACS 5.2 and I can not delete a service policy that was created. The message we receive is " the item that you are trying to delete is being referenced by other items". I am new to ACS, but I did go through each tab in the manager multiple times.
View 5 Replies
View Related
Jun 25, 2012
on the acs 5.2 , how to delete specific log for user X, ?
View 3 Replies
View Related
Mar 10, 2005
I was given a 510 PIX Ver 6.3(1)to reconfigure but have no information on the existing configuration and need to wipe it clean and start over how can I do this to get back to the factory default settings. I have tried the "monitor>" but I don't know the IP address of the PIX interface.and am not sure how to do the setup for recovering the password.
View 7 Replies
View Related
Apr 10, 2013
I'm doing a basic setup of ACS 5.3. For now, I'm configuring backup to a local repository
!
repository Backup
url disk:/Backup
!
How can I automatically delete old files? I need to keep only the last seven files.
View 2 Replies
View Related
Oct 12, 2011
I have two ACS 5.2 running as primary and secondary instances respectively. When I try to delete a remote log target under System Administration > ... > Configuration > Log Configuration > Remote Log Targets I get the following error message...."The item you trying to delete is referenced by other items. You must remove all references to this item before it can be deleted".
I have searched the configuration within the web gui and was unable to find anything that reference the object that I'm trying to delete.
View 2 Replies
View Related
Oct 5, 2011
How to delete the accounting/authorization Reports or logs ?
View 2 Replies
View Related
Jul 1, 2012
Working on a C4948-10g switch. Trying to reset switch to factory settings. I have ran the Switch#>wr erase, command but the vlan's are still in the config. If you do a show vlan it still shows all the vlan text. I have tried the Switch#>delete vlan.dat, doesn't work. Tried Switch#>delete nvram:vlan.dat, doesn't work. Tried Switch#>erase startup-config, doesn't work. How can I get rid of the vlan's?
View 7 Replies
View Related
Jul 16, 2012
I'm planning to migrate a customer from ACS 4.2 to ACS 5.3.
I have migrated the configuration for all the services but I'm thinking how to configure ASA 8.4 cut-through proxy service in TACACS+.
The same ASA uses TACACS+ for device mngt and RADIUS for vpn remote-access services.
View 1 Replies
View Related
May 10, 2010
We need to move from ESX 3.5 to ESX 4.0 a virtual machine running Cisco Secure ACS per Windows version 4.2.
View 10 Replies
View Related
Nov 16, 2011
All users are located in the local identity store.So - assume I do not implement ACS but I do turn on password expiration after 60 or 90 days. Will a user whose password is about to expire attempts to authenticate against ACS 5.2, will they be notified that their password is about to expire?Also, when a user attempts to authenticate but their password expired yesterday, will they be prompted to change it and if so, how will that prompt to change it be presented?
View 3 Replies
View Related
Feb 10, 2013
We are running with Cisco ACS v4.0 AAA server, Here I need the use of Proxy distribution table.
View 5 Replies
View Related
Dec 6, 2011
We're using Cisco Secure ACS 5.2 as a Proxy AAA server, using Active Directory as an External Identity Store. They are already synced and connected and thus I can login into the VPN using my Domain credentials.
But that's not enough. My client needs to limit who can and can't establish VPN session, I mean, the way it is now, EVERY single employee can do that if his/her credentials are valid in the Active Directory domain controller. So I need to do two things:
1) Using the Microsoft NPS server, via dialin attribute, allow or deny VPN sessions using ACS/ASA;
2) Using the company user credential attribute to identify which Authorization Group the requesting user should be in, Downloadable ACLs will then be applied according to the access policies created for each company.
View 3 Replies
View Related
May 29, 2011
I have an Acer AX3400 (windows 7). I'm trying to install wireless router Netgear WNR3500v2. I did not succeed sofar. Do I have to uninstall NVIDIA drivers first?
View 1 Replies
View Related
Mar 10, 2013
Cisco Airespace configuration in Cisco Secure ACS v5.3. We're migrating to ACS v5.3 but we're encountering an issue with Cisco Airespace. It is only working on ACS4.1 but when we tried to move it to Cisco Secure ACS v5.3, it is not working.
View 7 Replies
View Related
Jun 17, 2012
I have successfully set up a 5505 as a cut-through proxy so that wireless users are required to log in when they open a browser to access the Internet. Is there a way to take them to the original page they requested after the login is complete, rather than having it sit at the screen where it is says they are logged in?
View 1 Replies
View Related
Aug 1, 2012
i would like to use the ACS 5.3 as TACACS Proxy. Basically it works. But when checking the logs on the destination TACACS Server (ACS 4.2) i see that all requests (Source-NAs) came from the IP of the TACACS-Proxy. Not from the original source IP.
This is useless for my scenario, because on the destination TACACS Server the policies are built on the NetworkDevices Groups and AAA Clients = source IPs.
View 2 Replies
View Related
Mar 30, 2012
I ve been trying to acess some websites at work, but they are blocked via proxy, wich means, the only way you can access the internet is if you type a certain proxy (172.16.0.1, port 8080), at the control panel of your browser. I can only use the internet browser. If I try to change the proxy, to enter the blocked websites.Is there a possibility to unblock the websites without changing the proxy configuration?
View 2 Replies
View Related
Mar 27, 2013
I configure safari with auto proxy configuration, insert the proxy server name, and click apply.However, if i go to network-tools.com and do a traceroute, the trace does not show the proxy serverin the series of IP address's. I have tried with several different server names but i makes no
View 1 Replies
View Related
Jan 13, 2013
I want to use RADIUS (of Secure ACS 5.3) to authenticate users within an ISP environment. Users log connect to a network using a point to point connection (L2) and then they are sending a RADIUS request to get IP adresses. Secure ACS is not quite easy to look through in that case.
View 3 Replies
View Related
Jan 7, 2010
I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
View 7 Replies
View Related
Mar 15, 2012
I am setting up an LDAP identity store over ldaps in ACS 5.1. I specify that the connection uses secure authentication and provide the Root CA certificate. When I hit "Test Bind to Server", I get this error message in a popup window: "Connection test bind Failed :server certificate not found"Is this saying that ACS can't find the CA certificate uploaded, or does it mean the actual certificate presented by my LDAPS server during the bind test?
View 2 Replies
View Related
Jul 16, 2012
I'm with one problem, my OS Lion don't authentication in the Secure ACS Version: 5.2.0.26.10.For the Mac Lion operating system to work you must put in execeção the MAC Address of your computer. I wonder how it could cause the OS to authenticate the ACS Lion.
View 1 Replies
View Related
Jul 19, 2012
We are using version 5.3 with patch 5. Incremental and full backup are configured but every day we receive an alarm notification.
View 7 Replies
View Related
Sep 27, 2012
I am working on project with Secure ACS 5.2. I am trying to determine the proper External Database to use. LDAP or direct to AD?
Additionally, the Domain that I am connecting to has Multiple sub domains. All of the users are currently in the Sub domains, but will be moving to root domain later. How should I configure the connection, do I need to connec to each sub domain or can I just connect to the root?
View 2 Replies
View Related
Sep 1, 2011
I just want to know if i need to support High Availability in Cisco Secure ACS 5.1 appliance, will the base license suffice or do i need to buy Security Group Access System License/ Large deployment License. Again, do we require license for each appliance or just one is enough?
I Suppose the licensing rules are same for the Vmware version also.
View 2 Replies
View Related
Feb 4, 2012
I've recently been looking into linking in our Cisco 2960S Gb Switch with RSA SecureID via Radius.I've already managed to link it in for ssh access
but I've not managed to get it working for http / web access to the switchI think this is because we're using "single use" tokens for maximum security with RSA Secure-ID and the web interface attempts to authenticate multiple times against the Radius part of the RSA SecureID server (okay on the first authentication, but each time after it's going to want a different token code)
(if there's a way to get the switch to just authenticate once instead of multiple times against the radius server) For info the switch is a WS-C2960S-24TS-L with IOS 15.0(1)SE2
View 2 Replies
View Related
Apr 11, 2012
We are currently using Cisco ACS 5.3.0.40.2. One of the Services Selection Policy it hosts is:
Receive Authentication request from a wireless controller for a wireless userIf the wireless user's username contains a particular domain suffix, the request is proxied to an external proxy server using an External Proxy service (configured for both local/remote accounting)On receiving an Acccess-Accept from the external proxy, the user is given access and ACS 5 will start logging account packets for the username (nothing appears in the RADIUS authentication logs - ACS 5 it seems doesn't log proxied authentication requests) The above setup works fine in most instances. We start to have problems when an external proxy server strips the domain suffix off the username in the Access-Accept packet e.g.
ACS 5 proxies an Access-Request to an external proxy server (with Username = someuser@somwhere.com)The external proxy replies with an Access-Accept (with Username = someuser)The user 'someuser' is given access but subsequent accounting attempts fail because their username (without the domain suffix) doesn't match the Service Selection PolicyIs there any way to get ACS 5.3 to log proxied authentication requests? If not, can I configure ACS 5.3 to use the username in the Access-Request packet (rather than the username in the Access-Accept packet) for accounting?
View 2 Replies
View Related
