Cisco AAA/Identity/Nac :: ACS 5.3 - Error Generating CSR On Secondary
Nov 16, 2012
I am attemtping to install new ssl certs on our 5.3 cluster. I was able to generate the CSR on the Primary host. When I attempt to generate the csr on the secondary host, I receive the following error:
This System Failure occurred: Error while remotely calling Primary to create: com.cisco.nm.acs.im.certificate.CertificateRequest Object{ request=[B@144cead, privateKey=null, encryptedPrivateKeyPassword=[B@5ce155, certificateSubject=CN=xxxx.xxxxxx.net, keyLength=2048, digest=SHA1, timeStamp=null, friendlyName=null, guid=[B@1cd99ca, description=null, name=xxxx.xxxx.net, version=0, id=0}. Your changes have not been saved.Click OK to return to the list page.
Both hosts are running identical versions:
Cisco ACS VERSION INFORMATION
-----------------------------
Version : 5.3.0.40
Internal Build ID : B.839
View 1 Replies
ADVERTISEMENT
Feb 27, 2012
I have ACS 5.2 and would like to know if I can schedule a report to be sent to my email address each Sunday for example for all the failed and succeeded attempts for devices authentication.
View 3 Replies
View Related
Jun 7, 2012
We have two controllers 7510 with the same config (SSID, Mobility Groups, etc)... All APs now was joined in wlc01... If we try to one o more APs join to another controller.. it's is not possible and debug show this . [code]
View 1 Replies
View Related
Aug 26, 2012
i have planned a deployment with one acs in Europe working as primary, one acs in europe as secondary and one acs in USA as secondary also.
I can add one acs in europe to the deployment as secondary. When I try to add the acs in USA to the deployment - Nothing really works.
The status shown in the primary is offline (red) and status pending. It stays like this for hours. When I log in to the gui directly on the acs in USA, it still has status primary.
The two acs are transparently connected. There is WAN optimization (cisco waas) in between the two datacentres..
View 1 Replies
View Related
Apr 24, 2011
I have two ACS 5.2 working in redundancy Primary and Secondary my question in when my primary ACS goes down i can´t see the log in the secondary ACS. I read in the documentación that only one ACS can be configurated for working like logg collector server. Now I configurated my secondary ACS like logg collector server now when my Primary ACS goes down i can see the logg. Finally when my Secondary ACS goes down i can modified the ACS Primary Configution by show me the logg.. Is possible to do this automaticaly for show me the event logg ? when the ACS that is configurate like logg collector server goes down pass the event other ACS automatically..
View 3 Replies
View Related
Feb 28, 2013
We are using ACS 5.3 with two servers in a distributed solution.All logs are collected on primary server so when this server fails all logs are lost.How can I enable log on secondary server also?
View 2 Replies
View Related
Jun 5, 2013
I've just had to rebuild my ACS appliance with new hardrives but I am unable to register the devices to each I get a system error. I thought it may have had something to do with the rebuilt device not being joined tothe domain but it has now been joined albeit using a different ad account, but still cannot register to primary.
View 11 Replies
View Related
Oct 23, 2012
We have 4 ACS 5.3 Servers connected as Primary and Secondary Servers.We use a "RSA SecurID Token Servers" External userdatabase for authentications and are able to sucessfully authenticate (vpn-)users when the requests are send from the primary ACS Server.As soon as a secondary ACS server sends the request to the RSA server the request fails. "Node verification failes"
On the RSA Authentication Manager 6.1 Server, we have created a Agent-host wich contains the 3 secondary nodes (FQDN and IP's). The "sdconf.rec" file has been installed on theprimary ACS Server and are automatically (so it looks like) replicated to all ACS Servers.Still none of the secondary server are able to authenticate the users agains the RSA server.
View 1 Replies
View Related
Jan 22, 2012
I have a question about the number of Cisco licenses needed in two cases for ACS 5.3 Virtual Machine.One primary + One secondary : Just one license for all or one license for the primary + another one for the secondary ?One primary + several secondaries : Just one license for all or one license for the primary + just one license for all the secondaries ?
View 1 Replies
View Related
May 29, 2013
My customer has an ACS 1121 version 5.4. Now we want to install a secondary ACS 1121.
View 2 Replies
View Related
Jun 16, 2011
it is possible de use two servers ACS 5.2 (primary and secondary) in active/ active? or just in active/ passive?
View 3 Replies
View Related
Dec 6, 2011
I have installed 2 ACS 5.2 appliances, the two appear as Primary. When I try to register one of them with the other one using "System Administrator -> Local Operation -> Deployment Operations" I get the following message:
This System Failure occurred: Unable to authenticate with node.. Your changes have not been saved.Click OK to return to the list page.
I have tried with both "ACSAdmin" and "admin" users with their respective passwords.
View 3 Replies
View Related
Jun 11, 2012
Today I ran a failover test between our primary and secondary ACS systems (ran 'acs stop' on the primary) and in the process decided to promote the secondary while I had the primary down. All was fine until I brought the primary back up and tried to re-register the secondary to it. I get the following error message: I went into System Administration >Operations >Distributed System Management on each and it showed the other device as deregestered, tried to promote from there but it failed too, so I deleted them and tried to register the secondary again. After that didn't work I tried rebooting both but that didn't work either. I know the user/pass I'm using is good and I've tried using both the IP address and the hostname.
ACS/admin# sh app version acs
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40.5Internal Build ID : B.839Patches :5-3-0-40-5
View 3 Replies
View Related
Jun 1, 2013
I'm constantly seeing that the sync and replication status for my secondary admin/monitor node in the primary node as node not reachable. The secondary still thinks it is in standalone mode. When I run the ISE diag tool connectivity tests I am able successfully ping the devices from each other using both hostname and ip and the nslookup also works fine between both nodes. Ping and nslookups also work from different networks within the environment. The two nodes are in the same vlan on a 6500 vss pair but on different switches of the pair.
View 6 Replies
View Related
Oct 3, 2012
I have a pair of ACS appliances running 5.1 code. The appliances are set up as a replicated pair. I have valid local and trusted certificate authority certificates on the primary.
The trusted certificate authority certificate gets replicated to the secondary. Obviously the local certificate doesn't get replicated. I need to generate a certificate signing request on the secondary but it doesn't seem to allow you to do it.
View 1 Replies
View Related
Apr 21, 2013
I have a couple of ACS 5.2 configured as active and backup and I am doing dot 1x authentication using these servers . I have configured the switch with the bellow configuration.
radius-server host 10.0.10.15 auth-port 1645 acct-port 1646
radius-server host 10.0.10.16 auth-port 1645 acct-port 1646
radius-server key 7 aaaaaaaaaaaaaa
please help to understand what will happen in switch
1) in case of primary failure
2)in case if primary returns alive .
View 8 Replies
View Related
Aug 9, 2011
IP address of Primary had to be changed, to respond to a hardware failure of TACACS server with IP in many device configs.
Now the Secondary fails to respond to repeated "Deregister from Primary" requests, even after reload - apparently because it cannot reach the Primary at its old IP address.
Requesting Deregister in GUI generates pop-up that says, "This operation will deregister this ACS Instance from the Primary Instance. Management applications on this ACS instance will be restarted and you will be required to login again. After performing this operation
[code]....
View 1 Replies
View Related
Nov 2, 2011
Cisco ACS 5.2 secondary server is configured as a log collector for both primary and secondary server .Now i am facing problem in log collection from primary server .ACS secondary server is not collecting any logs from primary .
View 2 Replies
View Related
Mar 28, 2013
I'm using ACS 5.4p2 within distributed systems: one primary and one secondary instance.For now, primary instance is acting as Log Collector server and I can see any AAA audit logs.
When the primary instance fails I can authenticate successfully using the secondary instance.However, when primary instance comes back, I'm not able to see any audit logs operated by secondary.
View 9 Replies
View Related
Oct 6, 2012
I have two ACS v 5.2 (primary and secundary) and some users are in the internal stor and the others are in the AD.The local site topology is like this:
PC - AP - WLC - ACS - AD
Authentication method is PEAP(EAP-MSCHAPv2) and all user have the certificate company installed. The OS in the client users is Windows 7.Users was working fine but some users reports intranet disconnections. I see in the ACS log many "22056 Subject not found in the applicable identity store(s)." and "24415 User authentication against Active Directory failed since user's account is locked out" alarms.I believed it was because user wasn´t in the AD data base, but some times the same user is authenticated successfull and other i see the "22056...." or "24415...." alarms.
I switched the role for ACS primary to works as secundary and we see the same alarms.
View 2 Replies
View Related
Apr 29, 2010
Does Cisco WLC 5508 runnig code 6.0.196.0 allows you to generate CSR? Or do you have to use OPENSSL like in previous versions?
View 16 Replies
View Related
Jun 19, 2012
I am unable to see the interface down alarms on my cisco works LMS 4.0 .
This problem is happening only for the Gigabit interfaces , i m receiving the alarms for the POS interfaces . The router status is showning as known .i have also added this interface in poller also .
View 1 Replies
View Related
May 5, 2013
I've got a a customer that is using a single sign on product that uses agents installed on the customer's domain controllers. This works fine accept for one scenario. When the customer transitions from a wired to wireless connection or vice versa. We have determined the reason for this is that the DCs are not getting Windows logon events ie 540 on 2003 servers or 4624 on 2008+. The users have files shares mapped onto member servers but refreshing those is not hitting the DCs.
Any way to ensure hitting a domain resource generates a logon event on a DC without directly mapping a resource on a DC. If it matters there are 50 domain controllers and around 200 member servers spread all over 48 states.
View 7 Replies
View Related
Apr 10, 2013
We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.After escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 2 Replies
View Related
Jul 5, 2011
I've noted a number of traps reported correctly but with the wrong SSID in the detail on 7.0.116.0
View 1 Replies
View Related
Jun 3, 2013
ACS 5.4, when I was working in it. In the CLI appeared this file to solution I have to reload the ACS.
SMflag : 1Cmd str: haltSave the current ADE-OS running configuration? (yes/no) [yes] ? noContinue with shutdown? [y/n] Func Trace: <<< vsh_mark_process_status >>>22007: Terminated by signal 2.EOL ==>completedJob is completeRestored the shell's terminal mode.EOL: abnormal exit: code: 0EOL: signaled: 2 InterruptCmd execution successful
[Code] .........
View 3 Replies
View Related
Apr 10, 2013
We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.after escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 1 Replies
View Related
Jun 15, 2011
We have Cisco 3945 Router and generating crashinfo while firing PRI from this Router.
View 1 Replies
View Related
Sep 19, 2011
Recently I had came across 1 issue where one of the server IP had conflicted with VIP of Nexus core switch. The blade server was physically connected to Nexus Distribution switch which in turn connects to Nexus core. Neither Nexus core nor distribution had generate any logs in regards to IP conflict which ideally happens on Cisco catalyst switches. I haven't find any document on cisco as well as on internet for this issue . I dont know what logging need to enable on Nexus for this specific case . There are different logging levels define for every feature like hsrp, ip,monitor etc...
We have Nexus 7k with latest release 4.2(6) Software
BIOS: version 3.22.0
kickstart: version 4.2(6)
system: version 4.2(6)
View 5 Replies
View Related
Oct 8, 2012
On ACS 4.2.0.124 version installed on Appliance 1113.We are getting error code as "Internal error" and also "Enabling Tacacs+ is not allowed for this Access Server" while client authentication.
View 5 Replies
View Related
Sep 7, 2012
I configured ACS 5.3 and added AAA clients with TACACS+ server and shared secret key as cisco123. i did the below config on switch also. when i try to authenticate login with ACS it does not respond. Find the configuration and debug output.nd
In debug output it gives ruser and rem_addr is null. i did not understand why .
I am able to ping to ACS server and i used telnet 192.x.x.10 49 and it gives the proper output.
aaa new-model
aaa authentication login default group tacacs+ local
!
tacacs-server host 192.168.60.10 key cisco123
tacacs-server directed-request
ip tacacs source-interface Vlan172
View 2 Replies
View Related
Jun 4, 2013
I have the message error in my ACS 5.4 after migrate the versión (5.3 to 5.4)
View 2 Replies
View Related
Jan 12, 2012
I have a brand new ACS version 5.2. Everything is working fine. I go to cisco website and download the following packages:5-2-0-26-8.tar.gpg
From there, I ssh into the ACS and performed the following: acs patch install 5-2-0-26-8.tar.gpg repos acs-52-patch That works without any issues. My ACS is now upgrade to 5.2.0-26-8 An hour later, when I tried to perform this: acs patch install ACS_5.3.0.40.tar.gz repository Upgrade_to_5.3.0. it is not working. I get this message: Failed to copy file 'ACS_5.3.0.40.tar.gz' from repository Upgrade_to_5.3.0 (Error -306).
View 2 Replies
View Related
