Cisco WAN :: 3945 Router Generating Crash Info And Booting
Jun 15, 2011We have Cisco 3945 Router and generating crashinfo while firing PRI from this Router.
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 6500 - Reboot With Crash Info
Oct 25, 2012Our 6500 was reboot by self with crash info and i found it was happened by CPU HOG. The log is below for CPU HOG and you can see many times from attached crash info file.
%SYS-SP-3-CPUHOG: Task is running for (16000)m secs, more than (2000)m secs (15/12),process = RPC pagp_switch_mp2sp.
[code]....
I think this process made high CPU & memory issue and then there were internal communication fail.. isn't it? So i need to know what PRC pagp_switch_mp2sp is to prevent next issue.
Cisco Switching/Routing :: 1760 Crash Info Not Recovers At Flash
Aug 10, 2012Got a problem with my 1760 router. Bought it from ebay and booted it on today and got this error,It has 180224K/16384K bytes of memory and 2 paritions of 32768K flash.I erased both partitions and put a different version of the IOS on (still 12.4) and there is no difference, still get the errors.These aren't on any of my other 1760 routers so I assume they are linked to the problem.
View 3 Replies View RelatedCisco Firewall :: ASA 5505 Frequency Restart And Create A Crash-info File
Nov 28, 2010My asa5505 frequency restart and create a crash-infor file.
View 3 Replies View RelatedCisco Wireless :: 7.0.116.0 / WiSM Crash With No Crash Log
Feb 21, 2012I have many WiSM WLC's running 7.0.116.0. One WLC was rebooted few days ago but there was no crash file and nothing in logs say why this issue happened.There was a power problem at the same time the WLC rebooted (some switches and PE's was rebooted as well) but if it is a power issue why only one WLC inside the WiSM rebooted and the other WLC is still working fine with no reboot?I have 5 WiSM modules connected to the same 6500 box, only one WLC was rebooted which indicates a crash but no crash file registered for it.Is there anyway I can find the reason why that WLC was rebooted?
View 6 Replies View RelatedCisco :: Generating CSR For WLC 5508?
Apr 29, 2010Does Cisco WLC 5508 runnig code 6.0.196.0 allows you to generate CSR? Or do you have to use OPENSSL like in previous versions?
View 16 Replies View RelatedCisco :: LMS 4.0 Interface Down Alarms Are Not Generating
Jun 19, 2012I am unable to see the interface down alarms on my cisco works LMS 4.0 .
This problem is happening only for the Gigabit interfaces , i m receiving the alarms for the POS interfaces . The router status is showning as known .i have also added this interface in poller also .
Router Keeps Booting Everyone Off
Dec 23, 2012Having a problem where the router will randomly boot everyone off the network and display a "limited access" status. This happens every few hours and it's actually pretty annoying. I downloaded the wireless test and these are my results. If it matters at all, our Router is "Mendes". [code]
View 12 Replies View RelatedGenerating 540 Or 4624 Events
May 5, 2013I've got a a customer that is using a single sign on product that uses agents installed on the customer's domain controllers. This works fine accept for one scenario. When the customer transitions from a wired to wireless connection or vice versa. We have determined the reason for this is that the DCs are not getting Windows logon events ie 540 on 2003 servers or 4624 on 2008+. The users have files shares mapped onto member servers but refreshing those is not hitting the DCs.
Any way to ensure hitting a domain resource generates a logon event on a DC without directly mapping a resource on a DC. If it matters there are 50 domain controllers and around 200 member servers spread all over 48 states.
Cisco WAN :: LMS 4.2.3 Is Not Generating Protocol Flap / Down Alarms?
Apr 10, 2013We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.After escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.X - Schedule / Generating Report
Feb 27, 2012I have ACS 5.2 and would like to know if I can schedule a report to be sent to my email address each Sunday for example for all the failed and succeeded attempts for devices authentication.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 - Error Generating CSR On Secondary
Nov 16, 2012I am attemtping to install new ssl certs on our 5.3 cluster. I was able to generate the CSR on the Primary host. When I attempt to generate the csr on the secondary host, I receive the following error:
This System Failure occurred: Error while remotely calling Primary to create: com.cisco.nm.acs.im.certificate.CertificateRequest Object{ request=[B@144cead, privateKey=null, encryptedPrivateKeyPassword=[B@5ce155, certificateSubject=CN=xxxx.xxxxxx.net, keyLength=2048, digest=SHA1, timeStamp=null, friendlyName=null, guid=[B@1cd99ca, description=null, name=xxxx.xxxx.net, version=0, id=0}. Your changes have not been saved.Click OK to return to the list page.
Both hosts are running identical versions:
Cisco ACS VERSION INFORMATION
-----------------------------
Version : 5.3.0.40
Internal Build ID : B.839
Cisco :: 7.0.116.0 / WLC Generating Traps With Wrong SSID
Jul 5, 2011I've noted a number of traps reported correctly but with the wrong SSID in the detail on 7.0.116.0
View 1 Replies View RelatedDIR-655 - Secondary DNS Server Blank In Router Info
Jul 14, 2011I was setting a static IPs for my PCs, and for the Preferred and Alternate DNS Server addresses I looked on my router's Device Information page. It had "Primary DNS Server: 121.98.0.1", but "Secondary DNS Server:" is reported as "0.0.0.0". Router is a DIR-655:
I looked on my ISP's website and they have "121.98.0.2" listed as the Secondary Name Server/DNS:
Why does the router not report that? Is there something wrong? Should I still set 121.98.0.2 as the Alternate DNS Server in Windows?
EDIT: BTW, my modem reports both primary and secondary DNS servers on it's info page.
Cisco WAN :: 2811 Router Not Booting Properly?
Dec 16, 2010I am using a cisco 2811 router.It is not booting properly.It reboots continously by just decompressing the image repeatedly..
View 2 Replies View RelatedWRT120n Cisco Wireless Router Keeps Booting Off From Network
Apr 25, 2012my wrt120n cisco wireless router keeps booting me off my network.it is next door usually have a great signal but fades in and out the box for router says its for wireless n.....all i can get is g.can i manually change the settings and should i get a signal booster or a bigger and better wireless router? then i go power cycle my routers and modem and it will sometimes work and sometimes not wifi is next door but less than 50-60'.
View 1 Replies View RelatedCisco WAN :: 1841 Router Hangs Or Not Booting Up Properly
Jan 1, 2011I have Cisco 1841 Router with no WIC cards and USB.
Image is ipbase and on the flash. When it boots it gives the error and hangs - I changed the register value to 0x2142 but no change happened.
Following are the capture from the router .
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: [URL] (c) 2006 by cisco Systems, Inc.
Copyright
[Code]......
Cisco Switching/Routing :: LMS 4.2.3 Is Not Generating Protocol Flap / Down Alarms?
Apr 10, 2013We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.after escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 1 Replies View RelatedCisco WAN :: 3945 Router CPU Temperature?
Nov 8, 2012I am trying to find out what the 'normal' operating temperature of the CPU in a 3945 router is? We have just replaced some 2800 routers for 3945's and the NMS server initially complained about the new router CPU temperature being too high. Compared to the 2800 the CPU temperature is much hotter - 50 degrees celcius as opposed to 20-smothing degrees. I have searched but can't find what are considered 'normal'?
This is the output:
router#sho environment allSYSTEM POWER SUPPLY STATUS==========================Internal Power Supply 1 Type: DCInternal Power Supply 1 12V Output Status: Normal
[Code].....
TP-Link 3G/3.75G Router :: TL-MR3420 / Setup Info For Service Provider?
Mar 15, 2013Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : orange.at
When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by orange.at. It seemed to work fine but I experienced some funny server errors with certain web services. I contacted orange.at about this and they told me to adjust the provider settings in the router as follows:
Dial number: *99#
APN: fullspeed
The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).
Cisco Switching/Routing :: Nexus 7000 Not Generating Log For Duplicate IP Address?
Sep 19, 2011Recently I had came across 1 issue where one of the server IP had conflicted with VIP of Nexus core switch. The blade server was physically connected to Nexus Distribution switch which in turn connects to Nexus core. Neither Nexus core nor distribution had generate any logs in regards to IP conflict which ideally happens on Cisco catalyst switches. I haven't find any document on cisco as well as on internet for this issue . I dont know what logging need to enable on Nexus for this specific case . There are different logging levels define for every feature like hsrp, ip,monitor etc...
We have Nexus 7k with latest release 4.2(6) Software
BIOS: version 3.22.0
kickstart: version 4.2(6)
system: version 4.2(6)
Cisco :: Upgrade A Router From A 2811 To A 3945?
Nov 10, 2011I need to upgrade a router from a 2811 to a 3945.
2811 has the following modules:
Cisco WAN :: 3945 Router NAT Output Interpretation?
Oct 3, 2012I have some lags on my 3945 router. From show ip nat statistics there is following output:
BR1#show ip nat statistics
Total active translations: 20 (0 static, 20 dynamic; 20 extended)
Peak translations: 8877, occurred 1w0d ago
Outside interfaces:
GigabitEthernet0/0, GigabitEthernet0/1
[code].....
Cisco WAN :: URL Based Filtering In Router 3945
Jan 15, 2013Is Cisco 3945 router support URL based filtering . For example to block website [URL] but not the main site [URL].
View 1 Replies View RelatedCisco WAN :: Access-list On Router 3945
Mar 15, 2012I reported a really strange issue on a Cisco Router 3945. Here below info about release software used: [code] Please look at a brief extract of router running configuration file: [code] It’s an easy configuration of Extended ACL and the application on an Ethernet interface. The expected result is:
- The interface works properly (because access list is permitting every kind of data traffic in input)
- Checking “show access-list 180”, the counter of matched packets increments for all the packets that are forwarded inside the fa0/0/1.
But actually the Fastethernet 0/0/1 drops all the packets as if all the packets don’t match with access list (And this behavior is really incredible). The interface couldn't be used anymore because any kind of data traffic is denied.
Cisco WAN :: 3945 Router IOS For VoFR Feature?
May 18, 20113945 Router IOS Required for support VoFR Feature
View 1 Replies View RelatedCisco WAN :: 3945 Router And E3 / T3 Network Cards
Aug 11, 2011I just got my first 3945 router and E3/T3 Network cards and when I do a sho ver I can see the E3/T3 card but when I do a show run all I see are the 3 GE interfaces.
View 1 Replies View RelatedCisco WAN :: Router 3945 Log To Get 100 Mbps As Sum Of Tunnels
Aug 9, 2011I am getting the following message from a 3945 router: %CERM-4-TX_BW_LIMIT: Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license.
That router has 8 Gre/IPsec tunnels and one of those tunnels is 100Mbps.The question is, could I get 100Mbps as the sum of all tunnels, or is there a restriction to 85Mbps ??
Linksys Wired Router :: BEFSR81 Will Not Save Port Forward Info?
May 17, 2011BEFSR81 will not save port forward info. I am trying to setup port forwarding for xbox (53, 80, 88, 1863, 3074), I click on enable to the far right and then click save at the bottom. It says settings are succeful, will return in 5 seconds. When it returns everything is zeroed out.
View 3 Replies View RelatedLinksys Wireless Router :: E3000 - How To Get Info About Usage 2.4ghz Or 5ghz
Mar 19, 2011How do I know if I'm using 2.4 or 5ghz? I would like the laptop and ps3/net flix to use the 5ghz and everything else to use 2.4ghz. I used the e3000 CD fro the setup. When I was at the last part of the setup, when it gives you a ssid name and password. I deleted it and typed in a name that I could remember. I clicked the button for the next step and everything was complete. I also received another name for guest to use the computer. The e3000 setup just game me some wild name like running water.
I would like to know since I have two different names, which on e is using 5ghz and which one is using 2.4thz? Can you tell me if the e3000 automatically have the first name use 5ghz and the guest just 2.4ghz on the second name?
Cisco WAN :: Cannot Configure A Voice-port On Router 3945
Dec 21, 2012When I try to configure a voice port (like voice-port 0/0/0:15) after doing a conf t, it gives me an error of invalid input detected.We are using a Cisco 3945. We have successfully setup 3825 and 2851 in the past.
View 2 Replies View RelatedCisco :: 3945 Router Error While Adding In CiscoWorks
May 29, 2010I have a Cisco 3945 Router and when we try to add the same into the Cisco Works it gives me an error saying " CM0056 Config fetch failed for 192.168.xx.xx Cause: CM0204 Could not create DeviceContext for 1238 Cause: CM0206 Could not get the config transport implementation for 192.168.xx.xx Cause: UNKNOWN Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed.
We are using LMS version 2.6. Any info on the latest router 3945 with support or not.
Cisco WAN :: 3945 / How To Remove A File With SNMP From Router
Dec 10, 2012On a 3945 voicegateway,I want to remove a wave file (announcement), with the purpose that a new one can be automaticaly downloaden from UCCE to the box.Is there a way to do that automaticaly with SNMPSET <voicegateway> <MIB OID> <??wave file name??> <reload>
EDIT: or clear the cache, which it should be I think. (all wave file cache, or only one file, not sure what should be used and/or what is possible